Hp notebook 15-n051sm (F4C10EA) Touchpad buttons hard to press

Hi, i bought Hp notebook 15-n051sm(F4C10EA) few days ago, from first moment noticed when you need to use touchpad buttons that they require quite good force for pressing them.
It isnt issue if you use short period of time but for longer usability it's annoying experience.
Had few Hp notebook before and never had some strange experience with touchpad buttons.
Is this normal way to use touchpad buttons of this Notebook models or it's hardware issue which would be better to send product back to seller?
Ty on answers in advance.

joshko25
Read Adjusting Touchpad Sensitivity
and set Light Touch
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03523373&tmp_task=solveCategory&cc=us&dlc=en&lc...
Use HP Support Assistant and Update the BIOS and Drivers
Say thanks by clicking the "Kudos! Star" which is on the left.
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Similar Messages

Touchpad button hard to press

I've just converted over from a Windows laptop to this Macbook Pro. It's got a button below the touchpad for clicking.
It's significantly harder to press than the other laptop, and after several hours of use, I feel the strain in my thumb. I've searched around and don't see anyone else having this problem.
Thoughts?

It sounds like you have a unibody MBP, with the whole pad clicker, so you should try asking in the correct forum for that machine:
http://discussions.apple.com/category.jspa?categoryID=251
However, you can compare to another unit and determine if you have a hardware problem; otherwise, activate trackpad gestures, and use a double tap instead of clicking; or consider an external mouse?

Side buttons hard to press

Hi there,
first of all: my Z3 D6603 is 6 months old and does not have a single scratch, it is flawless and had no crash or fall. However over the last months the buttons to the side lost their easiness.
My buttons on the right hand side lost their "click" point, you don't a feeling anymore for when you have actually pressed the button successfully. Power button is half good, volume up is mediocre, volume down is working but I have to press really hard, it is annoying and I fear total loss of function within the next months.
What should I do?
Nighty

have you dropped your phone or spill any liquid that wasn't water, perhaps soda, beer, etc?
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Touchpad buttons so hard

I just bought a new notebook dv2 1000ep to my wife, but I find the touchpad buttons so hard and heavy, needing so much pressure from the hand. It's almost impossible to work more that half an hour with the touchpad.
I own an older dv6510ep and the difference to my wife's dv2 touchpad is huge! My touchpad buttoms are much softer.
I wonder if this is normal to this model (dv2)? Or is a case of a faulty notebook?
Thanks
Jorge Domingos

I received my new DV7 laptop as a direct build to order from HP and from what I have seen so far, it is a $1400 DOWNGRADE from all my old HP computers. Function keys that were on the old laptops are not present, The touch pad is loud, VERY HARD TO USE, the curser is always off one digit, and often I have to click the touch pad many times to get the blasted thing to respond. First Hp computer I've had that I have been un happy with in 20 years, and I am UNHAPPY! HP, CONTACT ME IF THERE IS A FIX FOR THIS THING. I am so UNHAPPY that I have just sold the second computer I purchased on EBAY with the box never opened. This blasted thing makes my fingers hurt to use and i can't imagine my wife trying. Oh, and whatever chinese toxin you make the touchpad out of now leaves a very bitter taste on your fingers so you CANNOT snack or eat an apple and use the computer.

Satellite U400 - Is it possible to replace the touchpad button?

Hello
I need help please. I want to know if there is a possible way to change the button at my Satellie U400 because they are getting soft and they are not as good and hard as it was before, so please anyone know's if I can remove those and put 2 new one's?
If you dont understand exactly what I mean take a look at the picture and you will see/understand.
[http://oi56.tinypic.com/j0wwoj.jpg]
thank you.

Hi Loow,
Im sure its possible to replace the touchpad buttons because you can replace everything on a notebook. But I think its a little bit tricky because you have to disassemble a lot of parts and thats not easy.
You should ask an authorized service provider The guys can order new spare part for you and exchange it. Just write an email for example to get in contact with them.
You can find a list of ASPs here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider

My notebook won't recognize my external hard drive

my notebook won't recognize my external hard drive. I can safely remove it, but when i look for it on my computer its not there?

Disable Time Machine from System Preferences.
Choose Select disk button, remove the old TM backup disk and add the new one.

Left touchpad button sticks on Pavilion DM4

My wife has a DM4 2180us Pavilion notebook and lately the left button stick or does not register a click. Looking at it I believe the problem is that its rubbing against the chassis frame around the button. Have tried cleaning around it with a cotton swab and rubbing alcohol. But although it helped a little it still is sticking. Kind of upset that we have not even had this PC a year and already have replaced the WiFi card and have had issues with it shutting down randomly. Fan runs all the time and seems to be struggling to keep it cool. But that's yet another issue that I can't find a solution for.

The touchpad is probably dead. The driver can be installed on your notebook with a non-functional touchpad, that is why you are seeing it in the device manager. I would recommend calling HP support at 1-800-474-6836 to have it repaired or replaced.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Touchpad buttons noisy

Hello all
I just bought a Lenovo N500. I find that the touchpad buttons are rather hard and noisy. We have 4 other laptops in the family (HP, Dell, Acer) and no one is so noisy. On my HP 8510w for example, there is absolutely no noise.
Is there a way to reduce the noise when I click with the touchpad button ?
Thanks for a hint
js

Hello Kayley_charissa,
Normally the touchpad doesn’t have a noise that it physically makes. Because it is less than a week old you have a couple choices, you can contact HP support to talk about a possible service repair, or you can contact the location that you purchased the computer from. They would normally have some options for you.
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Random shut down and wonky touchpad/button

Hello!
I've noticed that for the past few months, when I begin to type something, I often have problems with the text highlighting unexpectedly. Sometimes what I've been typing gets deleted, other times I'm taken back to a few pages prior. I have problems clicking on links at times. Either the button wants to click on 12 different things at once, or it doesn't seem to want to click at all, just highlighting. It's a constant struggle with the touchpad button.
About a week ago my mac also started to spontaneously shut down. Possibly when it gets too hot? I can't seem to find a pattern to it, and it's shut down on its own both plugged in and on battery power.
My hard drive is about 2 years old now, but the computer is 3. Is this the result of too much use or can something be done to troubleshoot?

I've had that random shut-down problem for a week now. It did it again a few minutes ago. I thought it might have been a heat-related problem, but I have the back of the computer propped up to increase the ventilation on the rear.
I've had that sticky mouse problem several months now, ever since the local shop replaced the trackpad-plate. I didn't ask the shop to replace; I took the computer in to replace the failed hard drive. But the plate had been chipping around the edges, and apparently Apple had a secret warranty on the plate, so the shop replaced the chipped cover for free. Shortly afterward the mouse started sticking and acting weird. I think I have found a work-around by not placing my thumbs on the mouse. The mouse seems to be elevated now; when I close the lid while the computer is on, the pressure on the mouse causes the computer to activate whatever the cursor is on.

How to deal with those pesky touchpad buttons

The Pavilion series laptops are really well made in a lot of respects. I have owned my DV5t for almost 4 years now and I've been quite happy with it (except for rather anemic battery life). There is one thing that became a nasty problem for me, that being the left touchpad button. It is the most commonly used touchpad button and unfortunately these buttons were not well designed. They can easily break after a certain number of hits, whereby there's no longer any spring to it. Pressing the button ends up getting double-taps like mad. Also, the silver coating on them tends to wear away, looking rather unsightly over time. Once you start seeing the black plastic beneath, it won't be long before the button breaks. It's really a shame, because these tactile feel buttons work well--they just don't last. The newer HP laptops have those "lite touch" buttons which I do not like. The tactile feel is so much better. Unfortunately, it seems like most laptop makers are going with those solid state buttons to avoid another component that might go wrong. It's a shame, because with just a little more effort they could have been designed to last a very long time.
As of this writing, I have now gone through TWO of these touchpads. How did I manage to get another two chances? Well, they can be replaced but unfortunately they require you to disassemble more than half of the laptop. You see, the touchpad is integrated into the palm bezel, and the palm bezel is a piece of plastic coated metal that runs all the way to the back of the laptop. To get at it requires about an hour of taking the laptop apart. It's not for the faint of heart either. However, there is a service manual available that shows you what to do and I was able to follow it... thrice. Yes, the first button wore out after just under 2 years. The second one held up about as long. I use the touchpad buttons frequently, so... well, needless to say, now that I've got the 3rd bezel in place, I am going to rely mostly on an external mouse. And when I have to use the touchpad, I am going to use it very carefully, not exerting too much pressure (note that you can also tap the touchpad itself for a single click, something good to get into the habit of doing). Additionally, I'm going to put a sheet of protector plastic on the left mouse button to help avoid wearing out the surface.
So... one hour to disassemble it and a little more than an hour to reassemble it. It looked daunting to do at first, but believe me if you're patient and can follow instructions it is definitely doable. You don't need to be an HP tech to do it.
As for the parts, I obtained them from eBay. Apparently there are a lot of excellent condition used parts available from a variety of sources. I got the bezel for just under $30 shipped. Also, the speaker grille part is metal and tends to dent, so this time around I replaced it as well as the keyboard (the original was fine, but just a little touchy on one or two keys). With all 3 of these parts replaced, my laptop feels like new all over again. As for obtaining parts, you'll need to do your homework with the HP parts finder. There are many variants of the Pavilion laptop models with many parts in common, so the part you need can vary by number. The parts catalog can help you find them.
Anyway, that's about it. After having done this for the 3rd time, I figured there might be others out there with this problem on the brink of tossing out the laptop or selling it for parts on the cheap. It's salvageable!
"If you keep an open mind, life will give you more possibilities."

Thank you for your information and support. I may have to replace my touch pad and keyboard and you have given me hope and confidence. Thank you again,
Jackson Gal

How do I fix my iPhone 4 down volume button? It's stiff and hard to press all of a sudden.

All of a sudden, the down button became hard to press, I don't hear that clicking noise it used to make when I press it. The up button is fine, it's just the down button. It still works but I have to press it really hard in order for it to work. How do I fix this? How do I get it replaced if I don't have warrnty onthis and it's been over a year since I got it? How much do I pay?

Apple generally only does replacements, not repairs on the iPhone. An out of warranty replacement would be $149 plus applicable taxes.
You can either call AppleCare or take the phone in to an Apple Retail Store to setup service. You can also try contacting your carrier to see if they have other options for you.
Seth

Left touchpad button delay in web browsers

I'm at a loss to figure out what could be causing my left button on my touchpad to delay intermittently. On both Google Chrome (whether stable, beta or dev) and Firefox, the left button when pressed may not respond for up to a few seconds. This is most noticeable when using Google Street View and Google Maps, which refuse to change viewpoint when holding down the left button. It isn't a Flash fault because there is also a delay when highlighting text.
I can rule out the possibility of any hardware fault as the left button on the touchpad works fine elsewhere, within KDE (ie. drag and dropping works without delay or fault) and other applications.
Output of my X log:
[ 5.365]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 5.365] X Protocol Version 11, Revision 0
[ 5.365] Build Operating System: Linux 3.8.7-1-ARCH x86_64
[ 5.365] Current Operating System: Linux TGHE 3.8.10-1-ARCH #1 SMP PREEMPT Sat Apr 27 12:36:59 CEST 2013 x86_64
[ 5.365] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=99d5896f-0144-4c5c-8c54-c11229ef01eb ro quiet
[ 5.365] Build Date: 17 April 2013 02:37:06PM
[ 5.365]
[ 5.365] Current version of pixman: 0.28.2
[ 5.365] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.365] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.365] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 28 21:34:03 2013
[ 5.367] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 5.368] (==) No Layout section. Using the first Screen section.
[ 5.368] (==) No screen section available. Using defaults.
[ 5.368] (**) |-->Screen "Default Screen Section" (0)
[ 5.368] (**) | |-->Monitor "<default monitor>"
[ 5.368] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5.368] (==) Automatically adding devices
[ 5.368] (==) Automatically enabling devices
[ 5.368] (==) Automatically adding GPU devices
[ 5.369] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 5.369] Entry deleted from font path.
[ 5.370] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 5.371] Entry deleted from font path.
[ 5.371] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 5.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 5.371] Entry deleted from font path.
[ 5.371] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 5.371] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 5.371] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.371] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.371] (II) Loader magic: 0x7fcc20
[ 5.371] (II) Module ABI versions:
[ 5.371] X.Org ANSI C Emulation: 0.4
[ 5.371] X.Org Video Driver: 14.1
[ 5.371] X.Org XInput driver : 19.1
[ 5.371] X.Org Server Extension : 7.0
[ 5.373] (--) PCI:*(0:1:0:0) 10de:0dcd:1028:04b7 rev 161, Mem @ 0xd4000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 5.498] Initializing built-in extension Generic Event Extension
[ 5.498] Initializing built-in extension SHAPE
[ 5.498] Initializing built-in extension MIT-SHM
[ 5.498] Initializing built-in extension XInputExtension
[ 5.498] Initializing built-in extension XTEST
[ 5.498] Initializing built-in extension BIG-REQUESTS
[ 5.498] Initializing built-in extension SYNC
[ 5.498] Initializing built-in extension XKEYBOARD
[ 5.498] Initializing built-in extension XC-MISC
[ 5.498] Initializing built-in extension SECURITY
[ 5.498] Initializing built-in extension XINERAMA
[ 5.498] Initializing built-in extension XFIXES
[ 5.498] Initializing built-in extension RENDER
[ 5.498] Initializing built-in extension RANDR
[ 5.498] Initializing built-in extension COMPOSITE
[ 5.498] Initializing built-in extension DAMAGE
[ 5.498] Initializing built-in extension MIT-SCREEN-SAVER
[ 5.498] Initializing built-in extension DOUBLE-BUFFER
[ 5.498] Initializing built-in extension RECORD
[ 5.498] Initializing built-in extension DPMS
[ 5.498] Initializing built-in extension X-Resource
[ 5.498] Initializing built-in extension XVideo
[ 5.498] Initializing built-in extension XVideo-MotionCompensation
[ 5.498] Initializing built-in extension XFree86-VidModeExtension
[ 5.498] Initializing built-in extension XFree86-DGA
[ 5.498] Initializing built-in extension XFree86-DRI
[ 5.498] Initializing built-in extension DRI2
[ 5.498] (II) LoadModule: "glx"
[ 5.499] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.560] (II) Module glx: vendor="NVIDIA Corporation"
[ 5.560] compiled for 4.0.2, module version = 1.0.0
[ 5.560] Module class: X.Org Server Extension
[ 5.560] (II) NVIDIA GLX Module 313.30 Wed Mar 27 15:51:21 PDT 2013
[ 5.560] Loading extension GLX
[ 5.560] (==) Matched nouveau as autoconfigured driver 0
[ 5.560] (==) Matched nvidia as autoconfigured driver 1
[ 5.560] (==) Matched nv as autoconfigured driver 2
[ 5.560] (==) Matched vesa as autoconfigured driver 3
[ 5.560] (==) Matched modesetting as autoconfigured driver 4
[ 5.560] (==) Matched fbdev as autoconfigured driver 5
[ 5.560] (==) Assigned the driver to the xf86ConfigLayout
[ 5.560] (II) LoadModule: "nouveau"
[ 5.562] (WW) Warning, couldn't open module nouveau
[ 5.562] (II) UnloadModule: "nouveau"
[ 5.562] (II) Unloading nouveau
[ 5.562] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 5.562] (II) LoadModule: "nvidia"
[ 5.563] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 5.569] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 5.569] compiled for 4.0.2, module version = 1.0.0
[ 5.569] Module class: X.Org Video Driver
[ 5.570] (II) LoadModule: "nv"
[ 5.571] (WW) Warning, couldn't open module nv
[ 5.571] (II) UnloadModule: "nv"
[ 5.571] (II) Unloading nv
[ 5.571] (EE) Failed to load module "nv" (module does not exist, 0)
[ 5.571] (II) LoadModule: "vesa"
[ 5.571] (WW) Warning, couldn't open module vesa
[ 5.571] (II) UnloadModule: "vesa"
[ 5.571] (II) Unloading vesa
[ 5.571] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 5.571] (II) LoadModule: "modesetting"
[ 5.571] (WW) Warning, couldn't open module modesetting
[ 5.571] (II) UnloadModule: "modesetting"
[ 5.571] (II) Unloading modesetting
[ 5.571] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 5.571] (II) LoadModule: "fbdev"
[ 5.571] (WW) Warning, couldn't open module fbdev
[ 5.571] (II) UnloadModule: "fbdev"
[ 5.571] (II) Unloading fbdev
[ 5.571] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 5.571] (II) NVIDIA dlloader X Driver 313.30 Wed Mar 27 15:33:21 PDT 2013
[ 5.571] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 5.572] (++) using VT number 7
[ 5.596] (II) Loading sub module "wfb"
[ 5.596] (II) LoadModule: "wfb"
[ 5.596] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 5.597] (II) Module wfb: vendor="X.Org Foundation"
[ 5.597] compiled for 1.14.1, module version = 1.0.0
[ 5.597] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.597] (II) Loading sub module "ramdac"
[ 5.597] (II) LoadModule: "ramdac"
[ 5.597] (II) Module "ramdac" already built-in
[ 5.598] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5.598] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 5.598] (==) NVIDIA(0): RGB weight 888
[ 5.598] (==) NVIDIA(0): Default visual is TrueColor
[ 5.598] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 5.599] (**) NVIDIA(0): Enabling 2D acceleration
[ 6.276] (WW) NVIDIA(GPU-0): Unable to read EDID for display device DFP-2
[ 6.283] (II) NVIDIA(0): NVIDIA GPU GeForce GT 555M (GF106) at PCI:1:0:0 (GPU-0)
[ 6.283] (--) NVIDIA(0): Memory: 3145728 kBytes
[ 6.283] (--) NVIDIA(0): VideoBIOS: 70.06.32.00.03
[ 6.283] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 6.521] (--) NVIDIA(0): Valid display device(s) on GeForce GT 555M at PCI:1:0:0
[ 6.521] (--) NVIDIA(0): DFP-0
[ 6.521] (--) NVIDIA(0): DFP-1
[ 6.521] (--) NVIDIA(0): LGD (DFP-2) (connected)
[ 6.521] (--) NVIDIA(0): DFP-3
[ 6.521] (--) NVIDIA(0): DFP-0: 165.0 MHz maximum pixel clock
[ 6.521] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 6.521] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 6.521] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 6.521] (--) NVIDIA(0): LGD (DFP-2): 480.0 MHz maximum pixel clock
[ 6.521] (--) NVIDIA(0): LGD (DFP-2): Internal DisplayPort
[ 6.521] (--) NVIDIA(0): DFP-3: 480.0 MHz maximum pixel clock
[ 6.521] (--) NVIDIA(0): DFP-3: Internal DisplayPort
[ 6.521] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 6.521] (**) NVIDIA(0): device LGD (DFP-2) (Using EDID frequencies has been
[ 6.521] (**) NVIDIA(0): enabled on all display devices.)
[ 6.530] (==) NVIDIA(0):
[ 6.530] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 6.530] (==) NVIDIA(0): will be used as the requested mode.
[ 6.530] (==) NVIDIA(0):
[ 6.530] (II) NVIDIA(0): Validated MetaModes:
[ 6.530] (II) NVIDIA(0): "DFP-2:nvidia-auto-select"
[ 6.530] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 6.534] (--) NVIDIA(0): DPI set to (128, 130); computed from "UseEdidDpi" X config
[ 6.535] (--) NVIDIA(0): option
[ 6.535] (--) Depth 24 pixmap format is 32 bpp
[ 6.535] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 6.535] (II) NVIDIA: access.
[ 6.637] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 6.637] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 6.637] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 6.637] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 6.637] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 6.637] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 6.637] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 6.637] (II) NVIDIA(0): Config Options in the README.
[ 6.657] (II) NVIDIA(0): Setting mode "DFP-2:nvidia-auto-select"
[ 6.747] Loading extension NV-GLX
[ 6.788] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 6.788] (==) NVIDIA(0): Backing store disabled
[ 6.788] (==) NVIDIA(0): Silken mouse enabled
[ 6.789] (==) NVIDIA(0): DPMS enabled
[ 6.789] Loading extension NV-CONTROL
[ 6.789] Loading extension XINERAMA
[ 6.789] (II) Loading sub module "dri2"
[ 6.789] (II) LoadModule: "dri2"
[ 6.789] (II) Module "dri2" already built-in
[ 6.789] (II) NVIDIA(0): [DRI2] Setup complete
[ 6.789] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 6.789] (--) RandR disabled
[ 6.794] (II) Initializing extension GLX
[ 6.891] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 6.891] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.891] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 6.891] (II) LoadModule: "evdev"
[ 6.891] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.892] (II) Module evdev: vendor="X.Org Foundation"
[ 6.892] compiled for 1.14.0, module version = 2.8.0
[ 6.892] Module class: X.Org XInput Driver
[ 6.892] ABI class: X.Org XInput driver, version 19.1
[ 6.892] (II) Using input driver 'evdev' for 'Power Button'
[ 6.892] (**) Power Button: always reports core events
[ 6.892] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 6.892] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.892] (--) evdev: Power Button: Found keys
[ 6.892] (II) evdev: Power Button: Configuring as keyboard
[ 6.892] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 6.892] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 6.893] (**) Option "xkb_rules" "evdev"
[ 6.893] (**) Option "xkb_model" "evdev"
[ 6.893] (**) Option "xkb_layout" "gb"
[ 6.936] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 6.936] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 6.936] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 6.936] (II) Using input driver 'evdev' for 'Video Bus'
[ 6.936] (**) Video Bus: always reports core events
[ 6.936] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 6.936] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 6.936] (--) evdev: Video Bus: Found keys
[ 6.936] (II) evdev: Video Bus: Configuring as keyboard
[ 6.936] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input7/event7"
[ 6.936] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 6.936] (**) Option "xkb_rules" "evdev"
[ 6.936] (**) Option "xkb_model" "evdev"
[ 6.936] (**) Option "xkb_layout" "gb"
[ 6.937] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 6.937] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.937] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 6.937] (II) Using input driver 'evdev' for 'Power Button'
[ 6.937] (**) Power Button: always reports core events
[ 6.937] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 6.937] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.937] (--) evdev: Power Button: Found keys
[ 6.937] (II) evdev: Power Button: Configuring as keyboard
[ 6.937] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 6.937] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 6.937] (**) Option "xkb_rules" "evdev"
[ 6.937] (**) Option "xkb_model" "evdev"
[ 6.938] (**) Option "xkb_layout" "gb"
[ 6.939] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 6.939] (II) No input driver specified, ignoring this device.
[ 6.939] (II) This device may have been added with another device file.
[ 6.939] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 6.939] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 6.939] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
[ 6.939] (II) Using input driver 'evdev' for 'Sleep Button'
[ 6.939] (**) Sleep Button: always reports core events
[ 6.939] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 6.939] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 6.939] (--) evdev: Sleep Button: Found keys
[ 6.939] (II) evdev: Sleep Button: Configuring as keyboard
[ 6.939] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 6.939] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 6.939] (**) Option "xkb_rules" "evdev"
[ 6.939] (**) Option "xkb_model" "evdev"
[ 6.939] (**) Option "xkb_layout" "gb"
[ 6.941] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
[ 6.941] (II) No input driver specified, ignoring this device.
[ 6.941] (II) This device may have been added with another device file.
[ 6.941] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
[ 6.941] (II) No input driver specified, ignoring this device.
[ 6.941] (II) This device may have been added with another device file.
[ 6.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[ 6.942] (II) No input driver specified, ignoring this device.
[ 6.942] (II) This device may have been added with another device file.
[ 6.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
[ 6.942] (II) No input driver specified, ignoring this device.
[ 6.942] (II) This device may have been added with another device file.
[ 6.943] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event6)
[ 6.943] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "evdev keyboard catchall"
[ 6.943] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "Keyboard Defaults"
[ 6.943] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_2HDM'
[ 6.943] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
[ 6.943] (**) evdev: Laptop_Integrated_Webcam_2HDM: Device: "/dev/input/event6"
[ 6.943] (--) evdev: Laptop_Integrated_Webcam_2HDM: Vendor 0x408 Product 0x2fb1
[ 6.943] (--) evdev: Laptop_Integrated_Webcam_2HDM: Found keys
[ 6.943] (II) evdev: Laptop_Integrated_Webcam_2HDM: Configuring as keyboard
[ 6.943] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input6/event6"
[ 6.943] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD, id 10)
[ 6.943] (**) Option "xkb_rules" "evdev"
[ 6.943] (**) Option "xkb_model" "evdev"
[ 6.943] (**) Option "xkb_layout" "gb"
[ 6.944] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 6.944] (II) No input driver specified, ignoring this device.
[ 6.944] (II) This device may have been added with another device file.
[ 6.945] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[ 6.945] (II) No input driver specified, ignoring this device.
[ 6.945] (II) This device may have been added with another device file.
[ 6.945] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 6.945] (II) No input driver specified, ignoring this device.
[ 6.945] (II) This device may have been added with another device file.
[ 6.946] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[ 6.946] (II) No input driver specified, ignoring this device.
[ 6.946] (II) This device may have been added with another device file.
[ 6.946] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 6.946] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 6.946] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 6.946] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 6.946] (**) AT Translated Set 2 keyboard: always reports core events
[ 6.946] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 6.946] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 6.946] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 6.946] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 6.946] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 6.946] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 6.946] (**) Option "xkb_rules" "evdev"
[ 6.946] (**) Option "xkb_model" "evdev"
[ 6.946] (**) Option "xkb_layout" "gb"
[ 6.947] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 6.947] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 6.947] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 6.947] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 6.947] (II) LoadModule: "synaptics"
[ 6.947] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 6.948] (II) Module synaptics: vendor="X.Org Foundation"
[ 6.948] compiled for 1.14.0, module version = 1.7.0
[ 6.948] Module class: X.Org XInput Driver
[ 6.948] ABI class: X.Org XInput driver, version 19.1
[ 6.948] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 6.948] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 6.948] (**) Option "Device" "/dev/input/event9"
[ 6.967] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 6.967] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5398 (res 42)
[ 6.967] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4728 (res 70)
[ 6.967] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 6.967] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 6.967] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 6.967] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 6.967] (**) Option "VertEdgeScroll" "on"
[ 6.967] (**) Option "TapButton1" "1"
[ 6.967] (**) Option "TapButton2" "2"
[ 6.967] (**) Option "TapButton3" "3"
[ 6.967] (**) Option "CoastingSpeed" "0"
[ 6.967] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 6.967] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 6.986] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 6.997] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 6.997] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 6.997] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 6.997] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.039
[ 6.997] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 6.998] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 6.998] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 6.998] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 6.998] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 6.998] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 6.998] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 6.999] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 6.999] (II) No input driver specified, ignoring this device.
[ 6.999] (II) This device may have been added with another device file.
[ 7.000] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event8)
[ 7.000] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 7.000] (**) Dell WMI hotkeys: Applying InputClass "Keyboard Defaults"
[ 7.000] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 7.000] (**) Dell WMI hotkeys: always reports core events
[ 7.000] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event8"
[ 7.000] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 7.000] (--) evdev: Dell WMI hotkeys: Found keys
[ 7.000] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 7.000] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[ 7.000] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 13)
[ 7.000] (**) Option "xkb_rules" "evdev"
[ 7.000] (**) Option "xkb_model" "evdev"
[ 7.000] (**) Option "xkb_layout" "gb"
[ 24.896] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 24.896] (**) NVIDIA(0): device LGD (DFP-2) (Using EDID frequencies has been
[ 24.896] (**) NVIDIA(0): enabled on all display devices.)
And my 50-synaptics.conf file (ignore the do not edit this file warning, it's been copied and pasted into the /etc/X11/xorg.conf.d/ directory):
# Example xorg.conf.d snippet that assigns the touchpad driver
# to all touchpads. See xorg.conf.d(5) for more information on
# InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwrite
# it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of
# Option "OptionName" "value"
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
Option "VertEdgeScroll" "on"
Option "CoastingSpeed" "0"
# This option is recommend on all Linux systems using evdev, but cannot be
# enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
MatchDevicePath "/dev/input/event*"
EndSection
Section "InputClass"
Identifier "touchpad ignore duplicates"
MatchIsTouchpad "on"
MatchOS "Linux"
MatchDevicePath "/dev/input/mouse*"
Option "Ignore" "on"
EndSection
# This option enables the bottom right corner to be a right button on
# non-synaptics clickpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Default clickpad buttons"
MatchDriver "synaptics"
Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
# To disable the bottom edge area so the buttons only work as buttons,
# not for movement, set the AreaBottomEdge
# Option "AreaBottomEdge" "82%"
EndSection
# This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Disable clickpad buttons on Apple touchpads"
MatchProduct "Apple|bcm5974"
MatchDriver "synaptics"
Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSection
Thanks in advance

Hello kal33,
Welcome to the HP Forums!
I understand the left part of the clickpad is not working. To assist you, please try all of the steps in this HP document: Using and Troubleshooting the TouchPad or ClickPad (Windows 8)
If these steps do not help, then there could be a hardware issue. Since the computer is in warranty, I would contact HP phone support for hardware assistance. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Please let me know if you have any other questions or concerns. Thanks for bringing this issue to the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Lenovo G500 - Can't Use Keys And Touchpad/Buttons At Same Time

Whilst gaming, primary button use for me will be WASD (Directional) and obviously right&left click.
The problem I'm getting is that whilst I'm holding one of WASD, then say right click to shoot it doesn't shoot - almost as if the button is locked whilst i'm holding a key. When I hold a button, and then press a key it allows me too. It's just when holding a key I can't press a button.
I have searched online for ages, put palm check on minimum(I can't turn it off, it's not a option), disabled synaptics, tried to install Elantech(Couldn't) but nothing seems to work.
It may not be the biggest issue, but it really takes the fun out of playing games as I have to stop walking so I can shoot.

hi danowens,
Can you try the following:
If you have a Synaptics Touchpad:
1. Uninstall the current touchpad driver and install the driver below from the Synaptics website
Windows 8/7/XP/Vista 64/32-bit Edition v17.0.19
118.1 MB zip
After installing the driver above, try to check if you can now disable Palm Check
- Touchpad PalmCheck - Turn On or Off in Windows
If you have an ELAN Touchpad:
- check this article
If the above fix doesn't work, try to temporarily uninstall the Touchpad driver (don't re-install it) and check if you can now use the WASD keys and the touchpad at the same time..
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Touchpad Button Broken

Hi
The left button on my dv6 touchpad 'broke' yesterday. It only registers a click in a certain place on the button, and if you try to click on any other part of the button, it just presses right down and nothing happens.
I'm guessing the whole touchpad will have to be replaced, but wondered if anyone can confirm that, please ?
Also, does anyone know how to get HP to reply to emails submitted via their website ? I've reported this fault twice, and have had no responses whatsoever !
Many thanks
Liz

Mine broken also. a few months out of warranty. Just like the battery won't take a charge. just like they stop updating printer drives for some printers in Windows 7. They don't care. I called and tried to get some "help" with my issues, but I am out of warranty.
shame on me for spending 700 bucks on a laptop and assuming it wiykd be usable after the 12 month warranty is up.
And I was wrong. Very many people having the same issues. I guess HP should be happy they aren't a car company, because they would have been forced into recalls.
Just quit buying HP Stuff....I know I will.

Touchpad button problem

Hi all,
A few weeks ago my MacBook (original Core Duo model) started detecting clicks on the touchpad button as double-clicks in the OS. This doesn't happen all the time, and seems much more likely to occur when I press on the left side of the button than the right, so I'm assuming it's a hardware issue.
Does anyone have a rough idea of how much it'd cost to get repaired at a UK Apple store? It's been out of warranty for a while unfortunately.
Thanks
J

I have two MB's one has a crisp trackpad button while the other had a mushy button. I fixed the mushy button quite easily. Take out the battery and look at the metal panel directly underneath the trackpad button. You'll see a circular indention in the metal. If you press lightly on the indention and at the same time press on the trackpad button you'll notice that the trackpad button's response is more crisp (at least mine was). I just pressed on the spot a few times to force the metal to bow every so slightly (not perceptible to the eye). Now my button clicks quite nicely across the entire button.

Hp notebook 15-n051sm (F4C10EA) Touchpad buttons hard to press

Similar Messages

Maybe you are looking for