HP Notebook 9628nr does not see DVD Drive no optical drive in device manager

for some reason it does not see the dvd drive this happen after I flash the bios which was recommended from the HP website can anybody tell me how to fix this problem

Im having a problem like this, DVD not appeare in my computer and system devices, after that a webcam will broken also( unknow device USB); solve: damaged motherboard, one of bridges- north probably
regards
and watch your motherboard properly

Similar Messages

Audition CC does not see the CD in the drive when I try to burn

Audition CC does not see the CD in the drive when I try to burn CD - says no media found
Windows 8 sees it OK

What folders are you talking about? Photos folders? Email folders?

My iMac does not see the new Toshiba external drive in Finder or Disk Utility. How can I get it to see the drive?

My iMac does not see the new Toshiba external drive in Finder or Disk Utility. How can I get it to see the drive?

From the menu bar, select
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Recovery mode and launch Disk Utility. Is the drive recognized?
Start up in Safe Mode and test.
Reset the NVRAM.
Reset the System Management Controller.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive is malfunctioning.

Mac Pro early 2008 2 x 2.8GHz Quad Core 10.7.5, replaced 4 x 500ghds with 4 x 3Tb and Raid card Raid5 them OK but can not load time machine back up as it does not see any of the 4 drives, neither does disc utilities, any thoughts?

On my Mac Pro, early 2008 2 x 2.8GHz Quad Core 10.7.5, replaced 4 x 500ghds with 4 x 3Tb. The Raid card Raid 5ed them OK but can not load time machine back up as it does not see any of the 4 drives, neither does disc utilities, any thoughts?

You don't see drives when using a hardware RAID only the volumes.
WD Green are not suitable for hardware RAID (or software RAID for that matter).
USB2 and TimeMachine are a disaster waiting to happen. I've used SATA (internal) and eSATA (using SATA PCIe cards) trouble-free.
I can't say I begin to understand your use or "choosing the install drive for the backup"
Install what?
You don't load TimeMachine. Maybe seems minor but that is not how to describe the behavior of software.
You read FAQ and How To http://www.apple.com/support/timemachine
Time Machine’s Gory Details:
https://www.apple.com/support/timemachine/
TimeMachine 101
https://support.apple.com/kb/HT1427
Lion Recovry & TimeMachine
http://www.apple.com/support/lion/installrecovery/
http://www.apple.com/support/lion/
How To Restore Your System
http://pondini.org/TM/14.htmlMac OS X v10.7 Lion
Pondini's Blog: Time Machine - Troubleshooting -- B5. Would you like to inherit (or re-use) the backup . . . ?

Logic does not see my hd omni as an input device. Any ideas? I've been told to reinstall logicpro - but apple won't let me because it says its already installed on this machine.

Logic does not see my hd omni as an input device. Any ideas? I've been told to reinstall logicpro - but apple won't let me because it says its already installed on this machine.

I'm having the same issue with a file called IMG_2353.MOV that was imported into iPhoto from my iPhone and also have to manually select the items to import (so the rogue file doesn't error everything out). I've tried using Image Capture to locate/delete the file directly from my iPhone, but even though I can SEE it in Image Capture, I can't delete it or anything. This is VERY frustrating! My friend/Apple guru's only suggestion was to backup my phone then restore it through iTunes. Risky but should do the trick. I'm too scared to try, though!

Satellite L30-105 (PSL33E) Windows Vista does not see DVD-ram UJ-850s

Hi
I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista doesn't recognize the DVD-ram any more. The BIOS recognize the DVD-ram. I did try to download the DVD-ram drivers but they are not on the side of Toshiba.
Who can help me to get the right driver or know more? From the problems with the Mat****a DVD-ram uj-850s ATA device and windows Vista.

Hi
The CD/DVD drive does not need special drivers!!!
The Vista includes a Microsoft driver which works with all ODDs (CD/DVD drives)
Simply said, the Vista should recognize the drive without any problems.
Some questions; did you get any error messages? What is the device manager status? Do you see any yellow exclamation marks?
There is an old way to fix a similar drive issue. It worked under XP so try it on Vista OS.
Its necessary to update the registry entry
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
1. Click on the start menu.
2. If this is a Vista machine in the search box type in regedit without the quotation marks.
3. search the registry key mentioned above.
4. In the right panel youll see something along the lines of UpperFilter and LowerFilter you want to click on each filter key and hit delete. Click yes when it asks to confirm if you wish to delete the key.
5. Restart Windows.
6. Let me know if this works.

Time Machine does not see a Time Capsule external drive

Time Machine will not recognize an external drive attached to my Time Capsule, even though it did so last week. How do I get it working again?
Until last week, I was using Time Machine to back up to a Verbatim 2 TB drive attached to a Time Capsule. It occasionally hung, requiring me to restart the Time Capsule in order to get backups working again, so I bought a Seagate 2 TB drive to replace the Verbatim in case the problem was a flaky drive. Now I can't get Time Machine to recognize either disk when the disk is attached to the Time Capsule.
Both disks are formatted in Mac OS Extended (Journaled). Both disks work correctly when I attach them directly to my Mac. When I attach either disk to the Time Capsule, Airport Utility shows the external drive, shows that sharing is enabled, and I can even mount the Time Capsule with Finder and see the external disk with Finder. But when I try to Select Disk in Time Machine Preferences, whether or not the Time Capsule is mounted with Finder, Time Machine Preferences doesn't see the disk—the only choices of disk are My User Account on the Time Capsule, and Other Time Capsule.
Restarting my Mac and restarting the Time Capsule does not help. Software and firmware updates are (and have been) up to date. I'm running OS X Mavericks 10.9.2 and Time Capsule version 7.6.4.
To reiterate, this was working a week ago. How do I get it working again?

If nothing in your configuration has changed, you can try plugging the disks one at a time directly into your mac, run Disk Utility and perform a Repair Disk. If any errors are displayed, rerun Repair Disk until there are none. Then try them back on the Time Capsule.

Finder does not see my Western Digital Hard drive?

I have been using a Western digital to back my macbook, but since upgrading to OS X 9 maverick it is no longer visible in the finder window?
I've used the Western digital utility and the drive passes all tests and it sees it?
updated the driver
view hard drives is turned on in preferences
Why isn't the macbook seeing it to do a backup?

Disregard, I guess it takes a while? It is finally there.

IPAD 1 problems after ios 5.1.1 update, itunes does not recognize IPAD.. I check the device manager, it identifies an unknown device (My ipad) but unable to use it.

I am using the generation 1 IPAD.
I recently updated my ios from ios 4 to ios 5.1.1, I did the restore after the update and all seemed fine as it was detected the first time.
I tried connecting the IPAD again but it shows that the computer, itunes is not able to detect the IPAD.
I checked on the device manager, it identifies an unknown device (IPAD) and says no software for the driver. I am using windows 7 on my laptop. I never had any such problem with the iso 4. Any suggestions as to how this can be solved?
Thanks,
Vinay

Thank you, I tried uninstalling the device driver to reinstall again. After doing the scan for hardware changes, nothing flashes on the device manager. I dont see anything related to the IPAD or any other device for which driver shows unidentified device. It is as though the device is not being seen by the computer at all..
I even tried flashing the home/sleep buttons together but that doesnt seem to identify any device either.
Anything else I am missing?

Encore CS3 does not see dvd drive

When I log onto a pc in our labs as a regular user and open Encore the dvd drive is not seen by Encore.
Logged in as an administrator, I can see the dvd drive in Encore.
Does anyone know how I can resolve this problem without giving admin rights to students?
Thank you for your time and assistance.

As far as I know, Encore is not written as multi-user, the operator must have full use of the computer

Hp pavilion dv9815nr notebook PC does not recognize dvd drive

I had the PC worked on for this problem and it was working ok. I don't use it very often so didn't know it had stopped working until I tried to use it again about 3 months later.

This has been the same problem with my HP Pavilion DV5. It could be a cause that I haven't been able to use it until it wear out, but still not sure if this is possible. Any suggestion?
Save the best for last!!!

WRT160NL - Does not see my Seagate 320Gb external drive

I plugged my Seagate 320Gb external drive into the USB port of my WRT160NL and I am seeing.a blank page. No titles, nothing!
This drive is formatted to FAT32 and I have been using it plugged into my PC for a couple of years.
Any ideas what I am doing wrong?

Check this for the USB drive which is compatible for WRT160NL.

Bridge does not see my external usb hard drive

I have searched on this topic and the advice I've seen so far relates to when Bridge is set up to auto launch. That is not the case with me. I have Vista 32bit and CS3.
I want to move files to it and make sure the keywords are ok.
The drive is empty right now, but it should still list the drive when I click on my computer where it sees my DVD drive, right?
Thanks for the help. I started a new topic to reflect the current issue.
Holly

Disregard, I guess it takes a while? It is finally there.

IMac does not see Nikon D300 camera as drive in finder

Please help. I bought this iMac for processing and printing my photography. In Windows 7 I can just plug my camera into the usb port and it sees the camera and the folder containing the photos I want to download onto the hard drive. I do the same thing on the iMac and I don't see the camera or folder anywhere. The LED on the camera flashes as if something is being read, but nothing pops up on the desktop or the finder window. What am I missing? Thanks for any help.

Have you checked your Finder Preferences (General tab) that external disks, etc are all checked to show on desktop? Also, have you checked your iPhoto Preferences to see what the setting is for "connecting camera opens..."? And, lastly, have you simply tried to use a card reader with your camera card? That is what I do; I simply want the card icon to show on my desktop; this method also saves the camera's batteries. Some camera brands do present a few problems (my Canon does) - the easy workaround is using a card reader.

Mac mini does not see files on external hard drive

Just got a new Mac Mini and this is my first Mac. How do I get files from my HD to my new mac mini? I backed up the files from my old laptop but when I plug it into my Mac, I don't have any picture or music files.

I had the same problem but only after I upgraded to Lion. I could see the files on my external drive on other Macs using older software. It seems that Lion wasn't seeing old files on the external drive. So we accessed the files on a Mac using Snow Leopard, copied all the files into one new folder on the same external hard drive and now they're there on Lion. Problem solved! I hope this helps

HP Notebook 9628nr does not see DVD Drive no optical drive in device manager

Similar Messages

Maybe you are looking for