HP Notebook breakdown/ Ask for recovery / Error code 0xc0000034 HELP

Hello,
Last week my PC broke down after I turned it off manually. Since then, when I turn it on I fell directly on the 'Recovery' blue page. Saying
'Your PC need to be repaired. The Boot configuration data file is missing some required information...'
Then if I press Esc for UEFI Firmware settings, I can select 'Actualize my PC', but when I select that it tells that the windows lector is locked, so basically I cannot do anything.
Also I don' have any installation CDs because these 'new' PCs come with nothing.
In advance thanks, I think its manageable but I just dont know anything about PC and I really dont know what to do. Also I would like not to loose my data if possible.
S

Hi @nanotsong
Welcome to the HP Forums! I see that you are getting a Boot Configuration Data file is missing error message. Did you happen to create a set of recovery CDs when you first got your notebook? You will need either those or an installation disk to repair the file. Try seeing if you can borrow an installation CD if you didn't create the recovery CDs.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

File missing (file\BCD error code 0Xc0000034 help need for work!

file missing (file\BCD error code 0Xc0000034 help need for work! what can i do?
have an p 2000 notebook pc

Hi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
What is the model or product number of your notebook? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP-PAVILION DM1-1090EV - Recovery - Error code:0XC0000034

need help please...
I used EASEUS Partition Master software to resize C: drive from 290GB to 50GB, then allocate the new partition 240GB to F: drive
when i try to boot from partition recovery by pressing f11 the following error message is shown

Hi,
Changing the partition sizes or deleting a partition fomr the original partition scheme causes the loss of the ability to access the recovery manager from the normal method. That ability can be resored by preformaing a factory image recovery. Be aware that a recovery is a destructive process and that makes it very different from Windows system restore. It is also an irreversible process.
You will have better results in your attempt to execute a recovery if you use a recovery disk set or usb recovery media.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

HP 650 notebook BSOD error code : 0xc0000034

I have a HP650 notebook (Windows 8.1) and have for about 20 months. I ran a battery check and it said to calibrate it so i did so by going into the HP diagnostic test or something by pressing F2/escape on start-up. I ran it fine and it went for about 2 hours and upn completion it said it worked. It then restarted the laptop and i got a BSOD. It read "Your PC needs to be repaired. The boot configuration data file is missing some required information. File /BCD . Error code:0xc0000034. You'll need to use the recovery tools on your installation media." After looking online for a couple of hours someone told me to run an elevated command prompt and type in the following in order: "Bootrec /fixmbr, Bootrec /fixboot, Bootrec /scanos. Bootrec /rebuildbcd". After doing so it worked and i backed up everything on my laptop. My question is why did this happen. It must of had to been something to do with the battery configuration. Anyway, how can i stop this from happening in the future? Will it happen again or is it fixed as i typed those specific commands above and it worked or are the commands just a temporary fix or something? Also can i run the battery check again just to double check it worked or do you think i will get the BSOD error message again?
Thanks

Hello, @arsenal234123
To get your issue more exposure I would suggest posting it in the commercial forums since the HP 650 Notebook PC is a commercial product. You can do this at Notebook - HP ProBook, ZBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
The support page for your product may be helpful in the meantime:
HP 650 Notebook PC.
I hope this helps!
Thank you for posting on the HP Forums.
I worked on behalf of HP.

HT5624 I Am not able to open my IPAD - it is asking for a "Pass Code" what is this?

I am not able to open my IPAD - it is asking for a "Pass Code" what is this?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

HT5576 iPad is asking for log in code?

iPad is asking for log in code? I did not set one up?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

A picture of a USB plug is on the screen with an arrow pointing to Itunes. when I connect it to our pc, the device is locked and is asking for a security code. I do not know the security code.

A USB plug picture is on my screen with an arrow pointing to ITunes. When I connect the Ipod to my computer, it is locked and is asking for
a security code. I do not know the security code.

Place the iPod in recovery mode and then restore it via iTunes. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

HT4113 My daughters iPod touch asks for her pass code but when she types it in the cursor does not move or input any characters so,she cannot get into the iPod. This has suddenly happened for no apparent reason

My daughters iPod touch asks for her pass code but when she types it in the cursor does not move or input any characters so,she cannot get into the iPod. This has suddenly happened for no apparent reason, what can we do? Can anyone help please?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I tried to buy an app and itunes keeps asking for a security code. What is a security code? I do not have one. I have a password.

I tried to buy an app and itunes keeps asking for a security code. What is a security code? I only have a password! And ID

Are you using a credit card?
http://store.apple.com/au/help/payments#creditus
Security codes
The credit card security code is a unique three or four digit number printed on the front (American Express) or back (Visa/MasterCard) of your card.

My new iPad air is suddenly asking for a pass code. I have only just finished restoring it from my iPad 2 and I didn't set one. The one I used before doesn't work. What can I do?

My new iPad air is asking for a pass code. I have only just finished restoring it via iTunes from my ipad2 and I didn't set one. The one I used before doesn't work. What can I do?

http://support.apple.com/kb/HT1212

How can i set a global error page for all error cod

how can i set a global error page for all error code?
i don't want to leave a long list in the web.xml file.could any one help me?
thanks

If u have a common Error JSP named as ErrorPage.jsp
You need to have the following piece of code in the JSP as :
<%@ page isErrorPage ="true"%>
This makes it as the Common Error Page for the Application. Now all you need to do is from other JSP's throw the Exception to teh container. The container will redirect to this Page and process accordingly.
Thanks and regards,
Pazhanikanthan. P

Wanted to update the software now available, but it is asking for a pass code. As far as I remember in didn't put in any pass code , how do I settle this issue . Earlier updates were asking Apple ID but pass code for updating the new soft ware not known.

Wanted to update the software now available, but it is asking for a pass code. As far as I remember in didn't put in any pass code , how do I settle this issue . Earlier updates were asking Apple ID but pass code for updating the new soft ware not known.

Hello Kewal,
Thank you for the details of the issue you are experiencing when trying to perform an update. I recommend trying to update using iTunes, and as always, it is a good idea to make a backup first.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT1212 i just downloaded ios 7.0.2 on iphone 4 and it is now asking for a pass code which i did not even set up do??

i just downloaded ios 7.0.2 on iphone 4 and it is now asking for a pass code which i did not even set up do??

I have an ipod 5g. i changed my passcode and then got a notification of a 7.0.2 update. i updated and now my passcode wont work? im certain that i entered the right passcode. i would try resetting on my macbook, but the screen is shattered.

My ipad is asking for a pass code to install updates - never done before and I haven't set one. What next?

My ipad is asking for a pass code to perform the software updates. It has never done this before and I haven't set a pass code. How do I find, amend or delete this?

It's asking for the passcode you use to lock/unlock your iPad.

I have turned on my phone this morning and it's asking for a pass code when I have never put one in and I can't get past the page help!

I have turned on my I phone this morning and it is asking for a pass code I have never used one and cannot get past the page can anyone help?

You won't get a reply on your email here. These forums are for users who want to help other users.
If you didn't buy your iPhone in your own country and you unlocked it to work in any way, you're out of luck. If you accidentally setup a passcode check out this old discussion:
https://discussions.apple.com/thread/3671431?start=0&tstart=0

HP Notebook breakdown/ Ask for recovery / Error code 0xc0000034 HELP

Similar Messages

Maybe you are looking for