Hp notebook going from 120 gb to 24 gb after formatting

Hi.
I need help with my hp dv 2000 series.
After using the recovery cd, send to me by the hp support people, to format the pc, it changes its capacity from 120 gb to 24 gb. I let the cd run by its self without making any changes.
How can I solve this problem?
Thanks.

puertadeoro wrote:
Hi.
I need help with my hp dv 2000 series.
After using the recovery cd, send to me by the hp support people, to format the pc, it changes its capacity from 120 gb to 24 gb. I let the cd run by its self without making any changes.
How can I solve this problem?
Thanks.
Welcome to the forum! Unfortunately, this is the Lenovo forurm, not the HP forum. While it's possible that one of our members will be able to help you solve the problem, HP's forum is located at http://forums.hp.com Good luck!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Similar Messages

My daq 6008 wil not drop the 5V after the VI is stopped, i have a digital signal going from the error out on the daq in the while loop to the error in on the daq outside the while loop and a boolean going to the data of the daq outside

my daq 6008 wil not drop the 5V on a digital output after the VI is stopped, i have a digital signal going from the error out on the daq in the while loop to the error in on the daq outside the while loop and a boolean going to the data of the daq outside, but i can t seemto get it to work

i attached the block diagram so you can have a look
Attachments:
PID Temp control.docx ‏120 KB

Why does my screen goes from bright (normal) to dim?

I hope someone can help. My screen keeps going from bright (normal) to dim then back to normal .

It could be a short in your power adaptor cable, break or crack in the power jack that the power adaptor plugs into, a failing power inverter (small long thin circuit board in the screen that converts DC back to AC) or some unusual setting in the power setting for the laptop. I have no idea what that last one actual is but I am guessing. Look at the notebook and note which lights are on when it is bright. See if the external power light goes out when it goes dim. This happens when you go from plugged power to battery. Try to run the notebook with the battery out of the system for a day and see if you still have the problem. Maybe the battery is starting to short out.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

A small schema from 120 GB export could not be imported

Dear,
could you please be so kind and advice me what could be a problem for the following issue?
I have 8.1.7 database on W2K (it is a shame, bit it is not a topic of my question) and I have to import one schema from 120 GB export done successfully few days ago. How to say - very simple task. So, I created the different user (e.g. TARGET_USER) in database, granted connect, resource privileges, and let me go:
cmd> set ORACLE_SID=SID
cmd> imp userid=sys fromuser=SOURCE_USER touser=TARGET_USER file=120_GB_export.dmp log=imp.log
So, import takes some time, I observe in task manager number of data read by IMP.EXE program. When the value reaches about 80 GB at about all tables are imported and then import goes on. When the number of data read from disk (values in task manager) reaches about 95% of export size the process hangs.
Checking in database: a) session is INACTIVE, b) in V$SESSION_WAIT I could find the following event: SQL*NET message from client, SECONDS_IN_WAIT increasing to minutes, hours and does not finish.
Have you any idea?
Kind Regards, Piotr

Try importing just the data first and re-create the indexes later.
Monitor the import process using,
SELECT
SUBSTR(sql_text, INSTR(sql_text,'INTO "'),30) table_name
, rows_processed
, ROUND( (sysdate-TO_DATE(first_load_time,'yyyy-mm-dd hh24:mi:ss'))*24*60,1) minutes
, TRUNC(rows_processed/((sysdate-to_date(first_load_time,'yyyy-mm-dd hh24:mi:ss'))*24*60)) rows_per_minute
FROM
sys.v_$sqlarea
WHERE
sql_text like 'INSERT %INTO "%'
AND command_type = 2
AND open_versions > 0;
check the alert.log for any errors reported.

Battery going from 70% to 0% in seconds.

I've been having a problem lately with my PowerBook going from a decent battery capacity to zero. Usually I am watching something on YouTube or another video. I've had my battery settings at "Better Energy Savings". I got a new battery during the recall...could it be my battery is on the fritz? My computer is working just fine save for the battery issue.

There have been issues with the recall batteries not lasting a long time. One sign of a lithium battery on it's last legs is when it drops to zero without warning. Typically this happens below 50%, however, as opposed to yours dropping from 70%. You might try contacting either Apple support or your local Apple store to see if they would replace the battery.
You've probably already read how to maintain the battery at http://www.apple.com/batteries/notebooks.html

ODBC connections fails after going from Office 2003 to 2010 on some but not all PCs

ODBC connections fails after going from Office 2003 to 2010 on some but not all PCs. Setting up the connection has been a hit and miss. Have tried both x86 and x64. Any ideas? Use ODBC from the control panel and C:\Windows\SysWOW64 same results. Using
SQLexpress 2008r2
Thanks

Hello,
Please consider to configure Windows Firewall or disable it. Not only Windows Firewall but any security software.
https://msdn.microsoft.com/en-us/library/cc646023(v=sql.120).aspx
Windows Firewall is enabled by default.
Make sure you are using SQL Server Native Client to create the ODBC DSN. Not all Windows versions have it, so you may need to download and install it.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

IBook G4 goes from 40% and goes to sleep without warning

Whenever I have my iBook G4 on battery power, at about 40% it just suddenly goes to sleep without warning. I can't wake it up until it is back on the charger but the light on the front right below where the trackpad is goes from bright to dim. The apple is not lit up however. I don't know what to do... if I should go to the Apple store or if I should just get a new battery. My computer is about two years old and has done for as long as I remember. I don't know what to do, but I also don't want to screw anything up or erase anything by accident. Any advice would be appreicated.

Hi Imyakaty,
Welcome to Apple Discussions
You might want to look at...
Knowledge Base Document #86284 about Calibrating your computer's battery for best performance
Knowledge Base Document #500666 has Tips for maximizing your PowerBook and iBook battery charge
Lithium-ion Batteries
About Notebook Batteries
Knowledge Base Document #14449, which covers Resetting Powerbook and iBook Power Management Unit (PMU)
Jon

Installed the update tonight and now my phone (Lumia 928) won't power up. I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen. What's wrong and how do I fix it? Help!

Installed the update tonight and now my phone (Lumia 928) won't power up. I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen. Tried it 10 times with the same result. What's wrong and how do I fix it? Help!

Oh no Mr.Ected!
I can see if we can get your phone back on! I understand how important it is to have a phone. Have you tried this to see if we can get it back on? http://vz.to/1DZhteH . If it is still goes to a red Verizon screen and then to black we might need to do a master reset. While the phone is off try this:http://vz.to/1DZhXkU Be mindful this is the last resort because it will erase everything on the phone. If you have done back up assistant in the past you will be able to get you contacts back. Please let me know if you need any more help.
AmberF_VZW
Follow us on Twitter @VZWSupport

Going from iphone 4s to 6 want to know if i can save and or tran my voicemails and voice memos to put on my new phone

going from 4s to 6 can I save my favorite voice mails and voice memos to put on my new phone via pc or cloud

If you are planning to set up your iPhone 6 by restoring the iCloud backup from the iPhone 4s, your Visual Voice Mails and Voice Memos will be restored.

IPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds recorded. This happens randomly and often and sometimes has the delay but starts at zero. Solution Anyone?

After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks

After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks

Data not going from active data table to new data table -DSO activation iss

Hi Experts,
Data is going from DSO1 to DSO2. I see some of the records are getting missed in DSO 2 which are supposed to come.
There is start routine from DSO1 TO DSO2 and as per the start routine some records should come but they are getting missed.
Apart from that..to DSO 2 there are 4 other DSO sending data.
I tried to send single record and saw that data is going

Hi Experts,
Data is going from DSO1 to DSO2. I see some of the records are getting missed in DSO 2 which are supposed to come.
There is start routine from DSO1 TO DSO2 and as per the start routine some records should come but they are getting missed.
Apart from that..to DSO 2 there are 4 other DSO sending data.
I tried to send single record and saw that data is going to New data table and upon activation it does not go to Active data table.
Please suggest.
Regards
Sudha

My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?

My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?
Please help me out as this is very irritating. This has been happening for the last 20-30 minutes. It had roughly half battery left.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Blue screen of death, and continous reboot. Phone never actually boots up, just keeps going from reboot to blue screen and back again. Any suggestion?

Blue screen of death, and continous reboot. Phone never actually boots up, just keeps going from reboot to blue screen and back again. Any suggestion?

Hello jared1915
If you are stuck in that loop, the next step would be to restore your iPhone. Check out the article below to get your iPhone into recovery-mode and restore it in iTunes.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G.

HT4623 The software update option is not on my phone. It just goes from "about" to "usage". I have an iPhone 3G. Every time I try to update it on iTunes, nothing changes. I have version 4.2.1, no matter what I do. Any suggestions?

I have an iPhone 3G, and cannot update my iOS. In the General tab, "Upadate Software" is not even there. It just goes from "About" to "Usage". When I try to update on iTunes, it always remains the same. iOS 4.2.1. Any suggestions? (My PC uses Windows XP). Also, my WiFi has completely quit working. Works fine on the other iPhones in the house, as well as the XBox 360, so I am sure it's my phone. I tried everything I could think of, including restoring the iphone to factory settings & then updating, but no luck. Thank you! for any help you can give! I plan to get an iPhone 5, but wasn't ready to do it quite yet. Hopefully my phone can be rescued until I'm ready.

That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed). Version 4.2.1 marks the end of your updates for that device.

I had to get a new iphone and want to know how to tell if my pictures from my previous phone were backed up on itunes. when i connect my c even if i'm going from a 4 to a 5s?

i had to get a new iphone and want to know how to tell if my pictures from my previous phone were backed up on itunes. when i connect to itunes, does it automatically sync / backup even if i'm going from a 4 w/IOS 6 to a 5S w/IOS 7?

Welcome to the Apple Community.
Yes you can probably delete the 2 incomplete back ups they are unlikely to work.
However, I'd be inclined to back up to a computer as well and restore from there, if you are changing your phone.

Hp notebook going from 120 gb to 24 gb after formatting

Similar Messages

Maybe you are looking for