HP NX9110 with loose A/C power socket causing power to suddenly stop?
Hi
Yeah, I have two HP laptops and neither of them are fully functional. It does make me wonder about Apple products.
I'm hoping the problem is simply a matter of disassembling the computer and resoldering the socket, however from the manual Huffer kindly gave me I worked out that there is a set procedure to disassembling a HP laptop.
Has anyone had experience with this sort of the thing or a service manual for a NX9110?
Thanks again for all your assistance.
Mark
No tips or info?
Mark
Similar Messages
-
Power adaptor suddenly stops working
my power adaptor has a strong tendency to stop working for no reason - one minute the light on the connector is green or orange and my computer is happily running/charging, then suddenly (usually without my noticing it) the light goes off, the computer starts running on battery, then goes to sleep. it's simple enough to fix - i just unplug the adaptor then plug it back in and it starts working again. however, it's pretty frikkin annoying.
it's bad enough when i'm actually at my computer, cause i at least get a 10 second warning that my battery is low and the computer is about to go into sleep mode, so i can jump up, run over to the wall socket, unplug and replug my adaptor, and with luck the computer hasn't gone to sleep yet. however often i'll leave my laptop running for a long download, only to come back later and find it asleep, with a 2 hour download cut off 1 1/2 hours in. arrrgh!
the thing is, i've owned 5 different apple laptops, and probably 6 or 7 standard issue apple adaptors, over the many years, and i had this probelm with the last 5 or 6 of them. is this a feature? what can i do to stop this? i love apples but i must say i've never had this problem with any of the pc's at work. also i'm surprised to have the problem replicated with so many adaptors, yet not see any other threads on the subject. is it me? am i doing something wrong?
ibook g4 Mac OS X (10.4.3)Over time, the settings in the Power Manager
may become unusable, which can result in operational
anomalies with the computer. Examples include not
turning on, not waking from sleep, not charging
the battery, or not seeing the AC Adapter, among
others."
G5 DP 2GHz,
23ACD, iBook, AEBS Mac OS X (10.3.7)
it's a new ibook (2 months old) so i wouldn't think this is the case - but as it sounds plausible i've tried it anyway. i'm going to leave the laptop on for a day or 2 and see if this solved the problem.
by the way, i do tend to leave my laptop on for days at a time if that makes any difference here...
ibook g4 Mac OS X (10.4.3) -
installed the ios 7.0.2 update to my iphone 4, now it is stuck on a screen with itunes icon and power plug.
I am unable to use the phone now. What should i do next? I plug in to itune in my computer and ask me to restore my phone? I will loose all my date?I hooked up itune and restore. after finished restores, it said my phone is in recovery mode and needs to be finish before using itune, my screen still show the itunes icon and power plug
-
Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected
My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
DanBUMP
Any ideas? -
Greetings from a Photoshop Newbie. I need a computer, preferably a Mac laptop, with some serious processing power. I take photos with a Pentax 645Z; files are 50MB raw. I upload from Adobe Bridge and manipulate the photo, sometimes turning them into files in excess of 250MB. I cannot resize as the large files are needed for enlargements. Have all sorts of problems trying to manipulate, add effects and saving most large files. I need some serious processing power. Can anyone suggest what Mac i should purchase? I thank you in advance for your help :-)
It sounds as if you're having some system-related problems now, unrelated to processing power as such. In particular, a buggy video driver can cause everything to slow to a crawl.
Medium format files are big, true, but not so big as to cause significant slowdowns on a normally functioning and reasonably current computer. A laptop will always be slower than a well-equipped desktop system, though. Mac vs PC plays no part in this, performance is unrelated to platform.
Bottlenecks are different in ACR and Photoshop, so that should give you a clue. ACR is computing-intensive and mostly limited by CPU speed. Photoshop, however, is mostly bandwidth-intensive and mainly limited by memory and disk throughput. It's also sensitive to GPU issues. -
installed the ios 7.0.2 update to my iphone 4, now it is stuck on a screen with itunes icon and power plug. is this corect? I am unable to use the phone now. What should i do next?
I hooked up itune and restore. after finished restores, it said my phone is in recovery mode and needs to be finish before using itune, my screen still show the itunes icon and power plug
-
How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?
How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?
Nope, the top OS version for the IBM processor is 10.5.8, and under that version I can not update the iTunes further than the 10.6.3 :-(
But that means the brand leaves a large chunch os costumers with still perfectly operating computers out of the loop on purpose, so to force us to upgrade computer?
Not fair at all, both are legitimate Apple products, they should sync no matter what! The sad thing is theu used to, before I migrated to iOS7 on the iPad, move that I now regret... -
My MacBook Pro with Retina display displays power point and not other windows when connected to a projector. Can anyone help out please?
You should also ask this in the MacBook Pro forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro -
Imac 27" Intel Core7 CPU 16 Gig RAM. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware diagnostic and all is fine. Did clean wipe from Mavrick back to Mountain Lion but problem remains. Apple Store can do no more.
I did some more digging, it appears to be a backlight problem only. I can see the screen very dimly if I use a bright flashlight in a very dark room. It also seems to run ok if the brightness is turned down a LOT.
So I'm thinking this is a LED driver board issue or the display itself. I'll open it up and check the connection between the two and see if I can get any more clues. At least I can use it somewhat now by dimming the display significantly... -
iPad will not charge if hooked by USB to pc or plugged into wall. How do I know if the problem is with iPad, cable or power adapter. I have a 12, 10 and 5W adapters no success with any. Only one lightening cable so can't swap cables.
I'm sorry but this is too funny to pass up.
-
my ipod touch 4th gen isnt work after a long time with 0 percent battery power.Then its not working. computer doesnt respond to my ipod .only black screen is appearing it even not wake up after reset it what can i do please help me
After being connected to a charging source overnight try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have a problem with the indicator for power on the side of my HP DV6-1341el.
I have a problem with the indicator for power on the side of my HP DV6-1341el. Insert the adapter's power jack on the notebook in front of the LED battery charging works, windows detects that the battery is charged, but if I use the diagnostic programs, they tell me they found that the computer is running on battery power and not AC mode.
Where is the problem?
I have also made the maneuver for the recognition by the operating system of the battery and does not seem to be there the problem.
If I use the laptop without battery in AC mode happens that led to the side of the notebook blinks twice, three times and then goes off when I put the power jack.Go into the Device Manager. Expand the battery device, select the ACPI-Compliant Battery Control Method device, right-click it and select uninstall. After you have done that, right-click any device in the Device Manager and select scan for hardware changes. Your operating system will reinstall the ACPI-Compliant Battery Control Method device.
Post your results whether they are negative or positive to keep us posted.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Jon,
I believe that this error is similar to a "connection reset by peer". It is
a Window specific error. I believe it indicates that something has happened
on the other end of the socket such that the socket has gone bad.
I think that this should only occur when people reset their connection
before the reply is sent. I don't believe that it is indicative of any
serious problem other than this communication failure caused by the client.
I've opened an issue to catch and squelch these spurious exceptions rather
than logging them. For now I think it is safe to ignore them.
Regards,
Adam
"Jon Mountjoy" <[email protected]> wrote in message
news:[email protected]...
Hi Guys,
Using weblogic 5.1 (downloaded pretty soon after announcement) on windows
2000 (yes I know not certified there yet) and using jdk1.2.2-001.
I have a pretty standard setup - a connection pool (5) to a sqlserver
(remote) machine.
A pretty standard multithreaded servlet - grabs a connection, does aselect,
calls dbkona to dump output, releases connection.
It runs fine - browser returns result. When I push 'reload' on browser,say
10 times very quickly, I get the following errors. It is sometimes a
combination of these:
1- Mon May 08 13:34:41 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1912 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled
Code)
2- Mon May 08 13:40:42 GMT+00:00 2000:<D> <ListenThread> Problem
accepting connecti on java.net.SocketException: Connection reset by peer:
JVM_recv in socket input stream read
Now I can get rid of (1) by switching off native IO!! This also stoppedIO
exceptions that were being raised by the servlet when it tried to outputto
the output stream. (2) persists.
I have changed nothing else in the properties.
(1) sounds like I may need to up the number of file descriptors open?
(2) I don't know. Is my server too loaded? I am running on a 600Mhzusing
64Mb heap for the server with 300Mb swap available...
Regards,
Jon
More substantial excerpts:
Mon May 08 13:40:42 GMT+00:00 2000:<D> <ListenThread> Problem accepting
connection
java.net.SocketException: Connection reset by peer: JVM_recv in socketinput
stream read
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java, Compiled Code)
at weblogic.socket.ResettableSocket.getPrefix(ResettableSocket.java,
Compiled Code)
at weblogic.socket.JVMSocketT3.claimSocket(JVMSocketT3.java, CompiledCode)
at weblogic.socket.JVMSocketT3.claimSocket(JVMSocketT3.java, CompiledCode)
at weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java,Compiled
Code)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1980 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1760 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1908 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)We are seeing the same error since switching to sp11 (we had been using
sp10). Haven't seen it in Solaris though. What is causing it?
Wed May 08 12:01:48 EDT 2002:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=3640 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java:259)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java:178)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:280)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:129)
"John Slaman" <[email protected]> wrote in message
news:[email protected]..
>
I'm getting a error as follows:
Mon Apr 22 19:04:10 EDT 2002:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=2368 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
I have no idea as to the cause. It's been posted in the archives before -but with
no particular solution.
I'm using WLS 5.1 SP11, JDK 1.2.2_007. Win2000.
Does anybody know the cause/solution?
Thanks.
"Jon Mountjoy" <[email protected]> wrote:
Hi,
I have noticed that applying the service pack helps things quite a bit.
I no longer get NT muxer errors etc etc. just the "connection reset by
peer"
every now and again.
As I am repeatedly hitting the server from one browser, your 'connection
going bad' scenario probably
applies quite well.
(btw. before the SP, the errors seemed to crop up more just before/during
a
GC.)
Jon -
Connection Failure: ReadFile on fd=1231 failed with err=64 + JVM_recv in socket input stream read
Hi Guys,
Using weblogic 5.1 (downloaded pretty soon after announcement) on windows
2000 (yes I know not certified there yet) and using jdk1.2.2-001.
I have a pretty standard setup - a connection pool (5) to a sqlserver
(remote) machine.
A pretty standard multithreaded servlet - grabs a connection, does a select,
calls dbkona to dump output, releases connection.
It runs fine - browser returns result. When I push 'reload' on browser, say
10 times very quickly, I get the following errors. It is sometimes a
combination of these:
1- Mon May 08 13:34:41 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1912 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled
Code)
2- Mon May 08 13:40:42 GMT+00:00 2000:<D> <ListenThread> Problem
accepting connecti on java.net.SocketException: Connection reset by peer:
JVM_recv in socket input stream read
Now I can get rid of (1) by switching off native IO!! This also stopped IO
exceptions that were being raised by the servlet when it tried to output to
the output stream. (2) persists.
I have changed nothing else in the properties.
(1) sounds like I may need to up the number of file descriptors open?
(2) I don't know. Is my server too loaded? I am running on a 600Mhz using
64Mb heap for the server with 300Mb swap available...
Regards,
Jon
More substantial excerpts:
Mon May 08 13:40:42 GMT+00:00 2000:<D> <ListenThread> Problem accepting
connection
java.net.SocketException: Connection reset by peer: JVM_recv in socket input
stream read
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java, Compiled Code)
at weblogic.socket.ResettableSocket.getPrefix(ResettableSocket.java,
Compiled Code)
at weblogic.socket.JVMSocketT3.claimSocket(JVMSocketT3.java, Compiled Code)
at weblogic.socket.JVMSocketT3.claimSocket(JVMSocketT3.java, Compiled Code)
at weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java, Compiled
Code)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1980 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1760 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1908 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)I have exactly the same problem running on Windows NT 4.0 (SP4) Weblogic 5.1 and
JDK1.2.2-001.
java.net.SocketException: ReadFile on fd=1048 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java, Compiled
Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java, Compiled
Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Jon Mountjoy wrote:
Hi Guys,
Using weblogic 5.1 (downloaded pretty soon after announcement) on windows
2000 (yes I know not certified there yet) and using jdk1.2.2-001.
I have a pretty standard setup - a connection pool (5) to a sqlserver
(remote) machine.
A pretty standard multithreaded servlet - grabs a connection, does a select,
calls dbkona to dump output, releases connection.
It runs fine - browser returns result. When I push 'reload' on browser, say
10 times very quickly, I get the following errors. It is sometimes a
combination of these:
1- Mon May 08 13:34:41 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1912 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled
Code)
2- Mon May 08 13:40:42 GMT+00:00 2000:<D> <ListenThread> Problem
accepting connecti on java.net.SocketException: Connection reset by peer:
JVM_recv in socket input stream read
Now I can get rid of (1) by switching off native IO!! This also stopped IO
exceptions that were being raised by the servlet when it tried to output to
the output stream. (2) persists.
I have changed nothing else in the properties.
(1) sounds like I may need to up the number of file descriptors open?
(2) I don't know. Is my server too loaded? I am running on a 600Mhz using
64Mb heap for the server with 300Mb swap available...
Regards,
Jon
More substantial excerpts:
Mon May 08 13:40:42 GMT+00:00 2000:<D> <ListenThread> Problem accepting
connection
java.net.SocketException: Connection reset by peer: JVM_recv in socket input
stream read
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java, Compiled Code)
at weblogic.socket.ResettableSocket.getPrefix(ResettableSocket.java,
Compiled Code)
at weblogic.socket.JVMSocketT3.claimSocket(JVMSocketT3.java, Compiled Code)
at weblogic.socket.JVMSocketT3.claimSocket(JVMSocketT3.java, Compiled Code)
at weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java, Compiled
Code)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1980 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1760 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1908 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code) -
PE 9.0 no sound with DV AVI type 2 clip, but sound is ok with Media Player and Power DVD
PE 9.0 no sound with DV AVI type 2 clip, but sound is ok with Media Player and Power DVD
Dear Bill,
Thanks for helping me.
G-Spot reports:
Audio
Codec: PCM Audio
Info: 48000Hz 1536 kb/s tot (2 chnls)
Video
Codec: dvsd
Name: DVC/DV Video
Status Codec(s) are installed
Len 2:36.960 Frms 3,924 kbps 28800 Qf 2.778
Pics/s 25.000 Frames/s 25.000 Field/s 50.000
I/L BFF PAL
Pic (w x 720 x 576 seq ext 16:9
Sar 1.250 (5:4) par 1.422 (~10:7) dar 1.778 (16:9)
I have imported a WMA-file in Audio-1 track of PE – still no sound to hear. But I can see the sound in the track. (Like in my video-clip) Therefore I also think it is a setting in PE. Will you be so kind to tell me where I have to look? Because I am no expert. Or is it possible that I have to activate anything in PE? It is first time that I will work with PE 9.
Further information: The original sound of the Mini-DVD is 5:1 surround. After first problem I have changed Nero to export in Stereo, but this did not solve the problem.
Thanks and regards
Werner
Maybe you are looking for
-
Problem with photos in Photoshop
I have discovered, since upgrading to iPhoto 6, that when I click on a picture, and it is supposed to be the only one which opens, at least four of the photos open, stacking one on top of the other. Not a problem is you are going to work with those f
-
I am trying to remove my credit card from my itunes account. Not sure how to.
-
I can't download an app I bought on iPad onto iPhone
I recently bought an iPhone and I also bought an app on my iPad and I want it to be on my iPhone without having to rebuy it. Help?
-
Strange problem with MSSQL2K (SP3)
Hi, I have downloaded for evaluation Kodo 2.4. After installing and configuring it I tried to run the PetShop example that is provided with the package. Unfortunately I got very strange error: java.sql.SQLException: [Microsoft][SQLServer 2000 Driver
-
How to save a png with a straight or fat alpha?
Long story short, work in broadcast and a new piece of gear prefers png files. I know how to save png's with a transparency, that's not the problem. What I don't know how to do or if it's possible is to save them with a straight or fat alpha. Righ