Hp office 4620 Can not get wireless network to work

I read everthing in form on this printer, did the reset router, down loaded CD please help me set up this printer. Ever other brand of wireless printer was so easy to set up who ever design this model I hope is not still working there.

Follow everything here.
http://www8.hp.com/us/en/campaigns/wireless-printing-center/overview.html?jumpid=ex_r11400_go_wirele...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except join not extend and I can not get a network on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Rout/

Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except "join a wireless network (which it does) not "extend a wireless network" (Led turns yellow and I can not get a network working on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Router.
Airport gets it address DHCP.

Funny how I can ping the Extreme but the Hard Ethernet ports dont seem to work correctly.
When the AirPort Extreme is configured to "Join" a wireless network, the Ethernet ports are not enabled.
Oddly, the AirPort Express has a special feature that will allow it to to "Join" virtually any wireless network.....and the Ethernet port can be enabled. So, an Express would work for your purpose to provide an Ethernet connection to the media player. This assumes that the Express is located where it can receive a strong wireless signal from your main router.
Note that the Express will not provide any additional wireless coverage when it "Joins".

I can not get my facetime to work. I have a wireless connection but I can not get my facetime to work

I can not get my facetime to work. I have a wireless connection but it is not working.

Doublechecking, Jensen. What's the precise text of your error message, please? (There's a few different ones I can think of that you might be getting.)

Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode

Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode
Hello, I am having problems migrating data from my old PC running XP (SP3) to my new Mac Pro 2012 using the Migration Assistant.
- I downloaded and installed the Windows Migration Assistant from Apple
- My Mac recognized PC and displays passcode
- The sasscode does not show / display on my PC
- My Mac is then stuck in "authenticating" loop and the PC is stuck "waiting for Mac to connect."
- Both computers are connected on same network (have connected PC on WIFI and using ethernet to Reuter)
I have looked on support site and only response I saw says to reinstall Windows Migration Assistant (which I have done)
Any ideas? If cant get this to workare there instructions for manually bring across relevant data eg itunes music and apps, photos, picasa data etc?

Why not turn off the Windows firewall and uninstall any other firewall software you have installed?
If you are using a Norton product uninstall it and discard it. To fully unistall most Norton products you have to go to the Norton website and download a soecial program to completely get rid of it. The normal uninstall feature built into the program will not remove all of it.

HT3867 can not get my wifi to work in any other location than my home. How dow I get it to work in other locations?

can not get my wifi to work in any other location than my home. How dow I get it to work in other locations?

What happens at those other locations? Error messages?
Do other devices connect to those other locations?
What kind of networks are they?

Can not get Software Update to work in Mountain Lion, switches to App Store

Can not get Software Update to work in Mountain Lion, switches to App Store

Software Update is now in the Mac App Store...
See Here > Re: Software update on Mountain Lion

Help... I can not get my microphone to work

Help.... I can NOT get my microphone to work with my Blaster X-Fi XtremeGamer Fatal1ty Professional card. When I plug it in and test it (in either Configure Speech Recoginition - Windows Vista / or in Counter-Strike Source, Test Microphone Button under the game options) both indicate that the system is not receiving any sound. However, both the speakers (5.1) and headphones work fine. I am using a Plantronics headset.
I am not sure what I am doing wrong. Below are my complete system specifications. Let me know what additional information you need, if any.
-Michael
PS - Seems like I have a similar problem to this post (http://forums.creative.com/creativel...&message.id=58)
Motherboard: MSI K9A2 Platinum Socket AM2+ ATX
CPU: AMD|PHENOM 9600 2.3GHz
RAM: GeIL Evo One 8GB(4 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Quad Channel Kit
Video Card: Two (2) ATI Radeon HD 3870 512mb ddr4 w/hdtv & DVI - CrossFire Enabled
Power Supply: CORSAIR CMPSU-750TX TX 750W Power Supply
Monitor: Samsung 305T SyncMaster 30in Analog/Digital LCD Monitor
Hard drives: Two (2) Seagate Barracuda 7200.11 ST3500320AS 500GB 7200 RPM SATA 3.0Gb/s
Optical Drives: Two (2) Lite-On Super-Multi LH20A1H Lightscribe DVD Burner, PLEXTOR px-810sa 18x DVD+/-rw dual layer/dvd-ram SATA
Additional PCI cards: HAUPPAUGE wintv-hvr-1800 dual tuner ntsc/atsc/qam pci express, Creative 7.1 Channels PCI Interface Sound Audio Card: Blaster X-Fi XtremeGamer Fatal1ty Professional
Number of fans present: Seven (7) [2 Front - 1 Center - 1 Side - 1 Rear - 1 Power Supply - 1 CPU]
Video Card Drivers in Use: Catalyst Control Center
Message Edited by mac19406 on 02-10-200807:57 PM

Here is the fix:
http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=29191

After update to OS4.2.1 I can not get the ringer to work for incoming calls

after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring

God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..

Can not get my cam to work on skype

I can not get my cam to work when using skype - any ideas? cam is working when in photo booth....

Then you have a problem with Skype. Check their forums for input.

Can not get my emails to work on iPad?

Can not get my emails to work on iPad?

google
<Insert mail provider> guide Ipad
if following the guide of your mail provider does not result in fixing your problem
then maybe your carrier block the required ports your mail provider need in order to send you mails

I can not get face time to work on my sons ipod touch any ideas

I can not get face time to work on my sons ipod touch - it just keeps going back to the verify screen even though my apple user account shows the email is verified and the ios update has been refreshed. even tried hard restart. help ? his grandad wants us to use it whilst we are away skiing this coming week .........!!

Maybe here:
iOS: Troubleshooting FaceTime and iMessage activation

Help, please! i can not get the sound to work on my pc

i can not get the sound to work on my pc

Try opening the device manager and remove your sound hardware and then rediscover. This works often. Let me know how it goes.
iGirlTech

I can not get the debugger to work on oracle studio 12.3 - It will not attach

I can not get the debugger to work on oracle studio 12.3 - It will not attach

APN for Tmobile is epc.tmobile.com
MMSC is http://216.155.174.84/servlets/mms
Here are the instructions:
Create devel catalog (appl from this catalog can damage your phone but don't have to so if you are not sure about your needs or skills dont use it and wait for official applications from Nokia or firmware update) The software hosted in Extras-devel is NOT ready for normal users! PLEASE PLEASE PLEASE don't play with it unless you really know what you are doing. Be ready to file proper bug reports instead of posting complaints. Expected problems: crashes, battery drain, poor system performance, full disk space & more - SERIOUSLY! Don't play with Extras-devel if you haven't backed up your data or are prepared to re-flash your device.
Application manager --> Application catalogs --> New
Catalog name: Extras-devel
Web address: http://repository.maemo.org/extras-devel
Distribution: fremantle
Components: free non-free
Refresh catalogue
Install fAPN and fMMS
Run fAPN and create new APN with MMS setting which you can get from your operator or find on this page (this may not be needed for all users, see note below)
Run fMMS and it will start with configuration
Put APN name the same you named your MMS APN point during fAPN configuration
Type MMSC which you can take from your operator
Type your number starting with +
Put max size of pics you want to have in outgoing MMS
Save all and start sending MMS from fMMS menu.
It is very important to put correct setting in new APN and be sure if there is proxy needed in your operator.
WHEN YOU GO TO MMS to set your configuraions, the information should look like this
MMSC: http://216.155.174.84/servlets/mms
Resize Image: 300
Your Phone Number: +##########
NOW U ARE DONE!! =)

I can not get my monitor to work!

Hello everyone. I have a first gen MacBook Pro 1.8 GHz with ATi graphics X1600. I can not get my external monitor to work. I have updated the drivers and installed the ATI catalyst control to no success. When I plug my monitor in, my laptop display immediately becomes monitor #2 and the external monitor will not wake up. I can not bring up any preferences or anything because everything is on the sleeping monitor. I have searched but haven't found a lot, maybe i'm just bad at searching which is possible. This is driving me nuts! Any help would be greatly appreciated!

Wilco wrote:You can set your wireless name to wlan0 using udev rules, it's probably called eth1 now.
I think wlan0 is still wlan0 not eth1.
$ip link
gives me:
1: lo <LOOPBACK,UP,LOWER_UPT> mtu 16436 qdisc noqueue state UNKNOWN mode DEFAULT qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: wlan0 <BROADCAST, MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
3: eth0 <BROADCAST, MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
$ip link set wlan0 up
shows me:
iwlwifi-3945-2.ucode firmware file req failed: -2
iwlwifi-3945-1.ucode firmware file req failed: -2
Could not read microcode: -2
RTNETLINK answers: No such file or directory
Last edited by Ventil1 (2012-09-19 09:06:49)

I can not get my mouse to work after changing the batteries

I can not get my wireless mouse to work after changing the batteries

Some ‘dumb’ questions just so we don’t assume what you have done:
Batteries installed with both + poles pointing to the top as you hold the mouse?
Mouse switch has been returned to the ‘on’ position - do you see a green light? First it will be solid green and then flashing green as the mouse tries to pair with the computer.
Try clicking the mouse a few times as it’s trying to pair.
If you don’t see a green light, try wiping off all battery contacts and reinserting the batteries. If still no green light and the mouse switch is ‘on’, are these old rechargeable batteries that been recharged many times or are they fresh normal batteries (not rechargeable batteries)?

Hp office 4620 Can not get wireless network to work

Similar Messages

Maybe you are looking for