HP Office 8600 on network computers can't find

I just installed an office pro 8600 it shows on the network with an IP address, but none of the computers on the network can find printer.  Printer works on all computers when usb is plugged in.  I have disabled firewalls, virus protection, made sure that hp is allowed in firewall,  Could someone please tell me how to get the printer recognized wirelessly?

Can't anyone help?

Similar Messages

  • I have a home office with 2 networked computers.....

    I have a home office with 2 networked computers (desktop and laptop).  I am tryong to open my business file ( a regular file but with the little arrow on the bottom left side )"the alias" and am getting this message: There was an error connecting to the server idisk.mac.com Check server name or IP address, and then try again.  If you are unable to resolve the problem contact your system administrator. So I click "ok" and FINDER comes up sayiong the alias can't be opened because the original item cannot be found....
    I have called for a technician to come out but they can't come until next week and I can't work. I have already tried powering down, which worked in the past to "reset" the server.
    Can anyone help?
    Andreanogh

    It sounds like the original of that file is stored on your iDisk, a service which Apple no longer provides. Go to this page, sign in and download all of the files that are still on there.
    Best of luck.

  • Wjen i trying to activate my personal file sharing  in system 10.4.11 it's not able to start this service so my network computers can't access my computer plz help or advice ??

    wjen i trying to activate my personal file sharing  in system 10.4.11 it's not able to start this service so my network computers can't access my computer plz help or advice ??

    When was the last time you did any of the following?
    Restart your computer?
    Repaired Permission & restarted your computer?
    Run "Repair Disk" from your install DVD?
    Please detail all you have done to resolve your issue.  Need this information so that the users can avoid the "been there, done that" scenario type responses.  This is to avoid repeating the troubleshooting you may have already tried.  Thank you. 

  • Computers Can't Find OfficeJet 6500 Wireless Connection

    For a while, my OfficeJet 6500 709n worked perfectly for a week or two over my wireless network. For reasons I cannot understand, none of my computers can see it anymore. It shows up on the router information page, but even browsing to the printer's IP in my browser times out. (So it's not a driver issue.)
    When I connect it to a wired ethernet connection, it works perfectly again, with the ability to access the browser interface. But nothing I do makes it work wirelessly again.
    Help?
    Steps I've taken:
    (1) Restarted all relevant computers, the router, and the printer.
    (2) Uninstalled and reinstalled drivers (10.3 from the site)
    (3) Put the printer on a static IP address. (192.168.1.100)
    (4) Ensured all OS firewalls are off
    (5) Printed a network status page from the printer front-panel showing that everything is connected to the network
    (6) Located the printer as a connected device on my wireless router configuration page (http://192.168.1.1)
    (7) Connected through my browser to other networked devices (my Tivo) to ensure that those work. They do.
    My setup:
    I have an OfficeJet 6500 709n that I use with two MacBook Pro laptops running OS 10.6.4. The whole system is networked through a Verizon FiOS router (ActionTec) with WPA encryption. 
    So I'm really, really stumped here. Any help at all would be wonderful.
    Thanks, all!

    From the front of the printer go to Setup > Network > Reset Network Defaults.  From the Network area, now run the Wireless Setup Wizard.
    Next, let's set a static IP address for the printer.  I need to know what router and security type you use.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Ethernet network printing- Can't find printers where's bonjour??

    Hi i am attempting to set up two printers to connect to my network of apple computers (an imac a mini server, and a macbook air) through ethernet but none of the computers can find them. I know that you used to be able to find them using bonjour but i don't know if apple dis countinued it or just made it difficult to work with. I need help in finding out how to find the printers because the only options i see are either by usb or ip address help please!

    I read that article before posting here but I skipped over the part about HPIJS. I'm trying to install foo2zjs now...
    I'll report on how it works.
    Edit: There was an error when trying to install Ghostscript via the commandline. I'll try to download it separately but I can't say I really know what I'm doing with this part

  • TS1398 Can not connect to Wi Fi on my iPad Wi Fi is on and will connect to other devices IPad is searching for network and can not find a network I have reset device and nothing is working help

    Can not connect iPad 2 to wi fi IConnection works on other devices.  This device is searching and can not find Wi Fi to connect too

    It does connect at other Hot Spot locations.  At home and here at my office, I have At&t DSL & Wireless,Motorola 3347 Router.  Computers hook right up to wireless with no problem, I just can't get ipad to connect.  Password is rejected.  Thanks for you quick response, I am not very computer litterate and this is driving me crazy.  Thanks again
    Mike

  • Network magic can't find my router

    I'm using WAG320N  with network pro 5.5 was working alright
    yesterday it asked me to upgrade / buy new version  or install old version 5.5 again.
    I followed step to install again , then software can't find my router even internet / network worked alright but only Network Magic doesn't work since re-install
    what's wrong with it?
    do I have to re-install everytime NM has upgrade? it's annoying

    I'm using WAG320N  with network pro 5.5 was working alright
    yesterday it asked me to upgrade / buy new version  or install old version 5.5 again.
    I followed step to install again , then software can't find my router even internet / network worked alright but only Network Magic doesn't work since re-install
    what's wrong with it?
    do I have to re-install everytime NM has upgrade? it's annoying

  • Computers can't find each other with home sharing

    My home sharing has worked before but now I can't get my two computers to "see" each other. I have tried just about everything. Any helpful hints?

    Mac or PC...?
    My first suggestion would be to check that the firewall on your router has the correct port/s open.
    Then i would switch off home sharing on both machines, reboot both and set up again.

  • Fax Setup Problem: Networked MacBook can't find HP 2160 Fax

    I have a recent MacBook Intel Duo OS X (10.4.10) that I have connected to base station via Airport. (Airport Extreme Base station, works fine for everything else) Base station is connected to cable modem (WAN) and Intel iMac is connected to base station via Ethernet cable. Network works fine.
    I have an HP 2160 All-in-One Printer/Fax/Scanner connected to base station via USB. I just installed HP's bloated driver package on my Airport networked MacBook.
    I can print fine via Airport networked MacBook, but I can't get the MacBook to find the fax (on printer setup) to allow me to send a fax via the HP 2160. The HP 2160 works fine as stand-alone fax (it's hooked up to phone line, has it's own internal fax modem).
    Any suggestions?
    Thanks.

    Two issues going on at once:
    Drivers - OS X has two kinds of drivers; Carbon and CUPS. HP provides Carbon, USB-only drivers with printers that only have a USB connection (Yes, this is different from Windows, where a driver is a driver). Yet the standard comm protocols are provided by CUPS. You need CUPS drivers to use the CUPS network protocols. Search here to see if there's an open source CUPS driver for your model (you may need to find a "similar" model driver):
    http://www.linux-foundation.org/en/OpenPrinting/macosx
    Then, to review the Windows Printing procedure, look at this:
    http://www.ifelix.co.uk/tech/3015.html

  • Connected to the Airport Express' Network but Can't Find Express

    I've recently been having some trouble with my network, which contains a modem connected to an Airport Express, with my iMac connecting wirelessly to that. My internet connection is getting dropped, and when I open up Airport Utility I can't see my Express. However, from the wireless indicator at the top-right of my screen, I am still connected to the Express' network. When I turn my iMac's Airport on and off, it reconnects to the Express' network (which is constantly at full-strength). I also can't ping the Express.
    So, I'm connecting to the Express' network but I can't do anything. After a variable amount of time (5 seconds to half-an-hour), the Express will appear in my Airport Utilities once again and I can surf the net. Does anyone have any thoughts? Is there a way to ping any of the protected wireless-networks that are available, just to see if it's a problem on my iMac's end? Could my Express still be broadcasting its SSID but has shut-down it's networking capability because of an overheating issue?
    Thanks.
    - Matt
    PS. My Airport Express is the 802.11n model.

    You may need to re set the AE to factory specs and start all over. Read the manual on a factory re set. Start on page 41 and go through page 42.

  • Removed a connection from network map, can not find again

    I removed a home computer from the network map, intending to block access. While I did achieve that, I am now trying to remove the block and allow the computer to reconnect. There seems to be no way possible to do this. Everywhere I search has told me to simply remove the intruder status from the network map, but the computer I'm trying to unblock does not show up on the map whatsoever. I've reinstalled my router, and that affected nothing. Is there another way to completely revert the router to factory default? Or is there some piece in the software that could fix this that I am not seeing? The computer's OS is Vista-32bit (that can not connect). 
    Thanks for your help,
    Steve.
    Message Edited by Steve0189 on 01-08-2010 09:29 AM
    Message Edited by Steve0189 on 01-08-2010 09:30 AM

    Steve0189 wrote:
    I removed a home computer from the network map, intending to block access. While I did achieve that, I am now trying to remove the block and allow the computer to reconnect. There seems to be no way possible to do this. Everywhere I search has told me to simply remove the intruder status from the network map, but the computer I'm trying to unblock does not show up on the map whatsoever. I've reinstalled my router, and that affected nothing. Is there another way to completely revert the router to factory default? Or is there some piece in the software that could fix this that I am not seeing? The computer's OS is Vista-32bit (that can not connect). 
    Thanks for your help,
    Steve.
    Message Edited by Steve0189 on 01-08-2010 09:29 AM
    Message Edited by Steve0189 on 01-08-2010 09:30 AM
    Hi Steve,
    Make sure that the Network Lock is off in Network Magic.
    thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
    Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

  • When my daughter connects to our home wifi she has to be within 5 feet of the modem, once she moves upstairs she loses wifi connection and then when choosing the network, it can't find our wifi network?

    When my daughter tries to connect to our home wifi, she has to be in the basement within 5 feet of our modem.  Once she comes upstairs she loses the connection.  All of our other devices connect to the wifi on all levels of our house, including her Dad who also got an iphone 4 and her ipod works as well as her brother's ipod and my blackberry.  I have tried resetting the network settings to no avail. I have already had our modem rebooted through our internet provider so I know the signal is good (as well as all other devices connect to wifi) I am losing sleep over this and she is quite frustrated so any help would be appreciated.  I'm starting to wonder if it's a defect in her phone???

    Is her iPhone in a case by any chance?  If so, remove the case and try again.  How does her iPhone work in free Wi-Fi locations?
    Try resetting the iPhone...
    Press and hold the Home and On/Off buttons simultaneously until you see the Apple logo, then release.  This may take up to 10 seconds.  This is the equivalent of a re-boot and you will not lose any data.
    If none of the above work take it to an Apple store or AASP for evaluation.  She will not be charged folr this and they will suggest a solution if there is a fault.

  • TS1398 OS 7: can't use a WIFI network cause can't find "accept cookies"

    I just installed OS7 in my iphone.
    After that the WIFI network in my hotel is not working anymore. It displays the following message:
    - "you would not be able to log in until you enable cookies in your web browser"
    The problem is that if I go to <settings> and then to <safari>, the menu only has option to BLOCK cookies, not ACCEPT. Thus I choose BLOCK/NEVER but still I receive the same message after trying again.
    So: Do you know in OS7 where is the menu to accept cookies? (it is not in the SETTINGS/SAFARI menu).

    I had the same problem with my iphone 5s's running 7.0.3 and 7.0.4  ...but the solution i found is that the wireless routers may need to be updated.
    My mother has an older router and i could not connect either phone to her wifi, i have a new router and when i tried connecting  both phones to the wifi it worked..
    So the simple solution may be to either get a newer wireless router or upgrade the software on the one you have.
    Hope this helps.

  • Trying to install wireless network, but can't find installation CD

    Would like to get another  CD to install a wireless network for Cisco wrt160n v2 router. I have rest the router to factory default. Would prefer to download the install wizard CD if possible.
    Thanks in advance for your help! 
    Solved!
    Go to Solution.

    Hi hdkimball,
    How about trying to get into the setup page of your WRT160N v2? Launch your internet explorer or other browsers then you type in 192.168.1.1. Leave username blank and password in small letters admin. Here are the links on how to reconfigure your router.
    Setting Up a Router with Cable Internet Service
    Setting up a Linksys router for DSL Internet connection

  • Network Question, Can't find a good answer anywhere.

    I am connecting the IPC1100 set top boxes using ethernet. When I connect the box to the back of the verizon supplied router everything works great. I then coneect the verizon router to a 24 port Meraki L2 switch and the IPC1100 boxes to the meraki switch, everything works great. Ok this is what has me dumb founded. If I connect the router to a Cisco 2960X switch running Lan Base and the latest code rev I get no video, but I do get Guide menus and show information. If I run a show int g1/0/1, (the interface the box is connected to) I can see multicast, boradcast, and data counters going up. I am gettting zero errors. I made an access list to allow all multicasts in the range verizon uses and am loging the hits and I see it going up. I have tried every possible configuration on the port and no video. I have tried every IGMP and command I know and still nothing. How is an enterprise switch not able to support video over ethernet for these boxes?

    Does the Cisco switch create a new subnet that the IPCs then are on?For sure all of the IPCs and VMS have to be on the same subnet.

Maybe you are looking for