HP Office Jet 4500 G510n-z fails to print on wireless network

Hi,
A while back my XP machine (Dell D620) stopped printing wirelessly with my officejet 4500 G510n-z. My Windows 7 D630 prints wirlessly with no problems. I have download the current HP drivers to no avail. I have looked at other posts but no workable solutions. The 4500 G510n-z appears as a printer but all print jobs end in an error. I cannot print a test page, notepad etc. All the jobs appear on the queue but they all error out. It seems to be an XP specific problem. I have XP pro version 2002 sevice pack 3. My network is just a Verizon Fios wireless router. In windows 7 I can see the actual address of the Hp wireless connection when the printer is added. In Xp I don't see the wireless address when I try to add the printer. Now it appears in the printer list on XP but 7 appears to see the actual wireless address and allows me to select it to add the printer. I have connected the XP machine to the printer and it would work for a while then stops working. Not sure what triggers the loss of connection. How can I specify the 4500 G510n-z connection for XP? I tried adding the IP address I see on my 7 machine but XP wants a server path that is //server etc UNC path.
I went into the printer properties and changed the address to match the 7 ip address 192.168.1.3 XP 192.168.1.9 Windows 7 but no go still.
Thanks
Al
This question was solved.
View Solution.

Thanks for all the help!. After the reinstall the printer IP which now ends in .3 is the same for my XP and 7 machines. I tested my machines to be sure. Both are printing fine thanks to your help!

Similar Messages

Office Jet 4500 G510n Printer Ready but error comes up in status

I have a Office Jet 4500 G510n and a MacBook Pro 15 late 2006 Model 2, Ver 10.6.8
I upgraded the HD to a SSD and everything works find except the printer. I can go to Utility and the TEST PAGE prints OK.
However, on STATUS it reads: "error/library/Printers/hp/cups/inkjet1.driver/contents/macos/injet/failed
I have checked on drivers and all I saw were for the "extra Page" ...
Lost!!!!
This question was solved.
View Solution.

From research on this HP Support site, I found that in Mac OSX they auto download updates for printing. Did not think about transfering my old HD to a SSD that those updates would follow... they did not. So... I downloaded all the updates (driver)to my new SSD and the HP Printer works!

COMPATIBILTY OF MY WIRELESS OFFICE JET 4500 G510N PRINTER WITH THE IOS AIRPRINT SOFTWARE

IS MY WIRELES OFFICE JET 4500 G510N PRINTER COMPATIBLE WITH THE IOS AIRPRINT SOFTWARE IN THE IPAD2
This question was solved.
View Solution.

No. You can use it with the ePrint mobile app for iOS devices. You can find out more by following the links below. Hope this helps.
Supported Printers for the HP ePrint Mobile App or HP ePrint Home & Biz:
http://goo.gl/RsNpf
HP ePrint Mobile Apps FAQs:
http://goo.gl/33WFq
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How do I print from my I-pad2 to my office jet 4500 g510n

How do I print from my I-pad2 to my price jet 4500 g510n.

Hi,
Firstly please check to see is your printer in this list ?
http://support.apple.com/kb/ht4356
If Yes, please follow this checklist and fix:
iPad: http://www.apple.com/support/ipad/assistant/airprint/
If No, probably you have to print indirect way.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Loaded new cartridge. alignment failed. now cannot print from hardcopy or pc. Office Jet 4500 G510n.

I loaded a color cartridge and started alignment. Alignment failed and disply said will use default values. Now I printer acts like it is printing, but it produces a blank page. This occurs whether I I try to copy from a printed form or or attempt to print from my pc.

This article should help resolve your blank pages:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I have a HP office Jet 4500 wireless All- In One, how do I delete the customer participation program

Hi
The customer Participation Program is taking up so much space that I want to remove it from my laptop.
I have a HP Office Jet 4500 wireless All In One. When I attempt to remove it I get a message that says if I remove the program
my device will no longer work.. How can I safely remove it without damaging my equiptment from working?

couple of questions about this:
Are you scanning from the printer, or with software on the computer? If from the computer, are you initiating the scan from Windows, HP software, or Word?
If you put a legal size document in the feeder, and press scan, unless the defaults have been changed to letter size, it should scan the entire legal size sheet. You should be able to go into the settings and change that if the default has been set to letter.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

I have an hp office jet 4500 and os maverick 10.9.4 and I can't get it to print after last upgrade, multiple malfunctions and error, help?

I have an hp office jet 4500 and os maverick 10.9.4 and I can’t get it to print after last upgrade, multiple malfunctions and error, help? I have tried deleting and resetting printer and re-installing update 6 times. Last update attempt showed none available??? I can’t load the software directly from HP because their only option is to use the software update option on the mac....frustrated!!! Help!!
I get blank pages that just run through the printer and a stats window that just 33% complete and goes no further.

I am going on the guess that an old driver is still installed...
Use Finder Go > go to folder, and go to /Library/Printers and delete the HP folder(s).
Reset the Printing System:
OS X Mavericks: Reset the printing system
Now, Add the printer in Print & Scan prefs.

I have a Mac OS X 10.4.11 and a HP Office Jet 4500 Desktop. What driver can I use?

I have a Mini Mac desktop computer, MAC OS X 10.4.11 and a HP Office Jet 4500 Desktop printer. What driver can I use to install this printer?

Hey @Greenise,
Welcome to the HP Support Forums!
I would like to assist you today in getting the proper Full Feature Software and Driver package to install your HP Officejet 4500 Desktop All-in-One printer on your Mac OS X 10.4.11 Operating System.
Below is the link for the Full Feature Software and Driver Installer. Simply click on the link and select the 'Download' button in the top left hand corner. Once the download is complete just run through the on screen instructions to install your printer.
HP Officejet Full Feature Software and Driver (Universal) - Mac OS X 10.4,10.5 and 10.6.
Please let me know if this installer works for you and if you have any other questions. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Cannot connect my office jet 4500 to my computer

How do I obtain the driver to scan from my office jet 4500 to my computer?

Officejet 4500 scan driver is available in below link. Based on your operating system, download and install 'Driver - Product Installation Software'.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=3919...

Office Jet 4500 Sleep Mode

We installed a Office Jet 4500 Wireless printer 4-6 weeks ago. Everything is good accept it occassionally goes into 'sleep mode' when it has not been used for a couple of days. After trying several combinations of buttons, we cannot figure out how to get it back into normal operating mode without unplugging it. The manual is silent on this issue. Anybody have the magic code for waking up this machine after it has gone into sleep mode? Thanks in advance for your help.

Same problem here. I followed the instructions to supposedly turn off the sleep mode, but all that did was reset the entire machine--including the 85 speed dials I had entered. HP tech support is clueless about this problem.

Office Jet Pro 6835 all-in-one printer

I recently purchased an Office Jet Pro 6835 all-in-one printer. It has stopped printing and displays the error message "there is a problem with the printhead". Is this by any chance an indication I am already out of ink? I don't want to assume this and waste $100 on ink cartridges....Thanks for any help or suggestions

HI RODA80,
Welcome to the HP support forums. I understand that when you are printing a multiple page document on your Officejet Pro 8500a that only the first 2 pages print.
To better understand the issue would you please provide some further information:
1)    What operating system are you using (Windows 7, Mac 10.8, or Windows 8, etc)?
2)    Is this happening for all multiple page documents or just one?
3)    Has a default of only printing the first 2 pages been accidentally set?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Can print but not scan in Windows 8.1 to HP Office Jet 4500 510n-z

New computer over the weekend with Windows 8 installed. Upgraded to 8.1online My HP Office Jet all-in-one 4500 prints fine, but I have no way to scan. I tried using the HP website to download and install the full driver. When it gets to the installation page, it just hangs on the page trying to communicate with my printer. Cannot get past that page.
I also tried the HP Print and Scan Doctor utility. It recognizes my HP all-in-one, but when it goes to the first step of communicating with the selected product, it gets about 3/4 done and then just hangs.
I have tried disabling my firewall. Still no luck.
I tried going to Device Manager and having it searched for updated drivers. It says the current driver is up-to-date.
I tried Windows Fax and Scan. When I choose New Scan, it says I have no scanner installed.
Somewhere there is a big error in this mess that is not allowing my printer and Windows to allow this driver to be fixed. HELP!
This question was solved.
View Solution.

Hello 8latinfans,
I understand that when you are installing the full featured software, that it hangs on communicating with the product. I have included the following document, 'The Progress Bar on the Software Installation Stops or Stalls'. This will walk you through different steps to try and get the software installed.
If the above document fails to resolve the issue, please let me know if there are any specific error messages that you do get.
Thank you.
I worked on behalf of HP

HP Office Jet Pro 8600 Plus 910 n printer driver does not install on a windows server 2008R2 OS

I recently had a new server installed, a Proliant with a Windows Server 2008R2 operating system. I now just discovered that my All in One Office Jet Pro 8600 Plus A 910 will not install on the Windows Server 2008 R2, ïncompatible operating system. Does anybody have a workaround or solution?

Hello dawnp,
Welcome to the HP Forums.
I see that you are having an issue with installing the printer on to your Windows 7 computer.
I suggest that we start off by running the HP Print and Scan Doctor. If the Doctor fails, please let me know where it failed as well as any error codes you may see.
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

My new HP Office Jet pro 8600 won't connect to my wireless Airport

I try and set up my new Office jet to my wireless and I get the message: More than one access point/wireless router has been found that matches your wireless network name. I only have one router and it is an Apple Airport Extreme. I've tried doing throught he network wizard and tried doing it through the installation on the computer with it directly connected to the computer. I called HP and was on the phone for an hour and all they could come up with was that the Airport had 5 GHz and so it will sense two routers. Huh???? What can I do? I don't want a new router since I just got that one.

If your router supports dual band broadcasting 5Ghz and 2.4 Ghz, log into your router and look at the two wireless profile names. The names (SSID) should be changed so that they are different from each other for each band 5 and 2.4. Also if the SSID is the default SSID that ships with the router, change it to a unique name as a neighbor within range may have the same SSID. Rename to "my unique SSID" and connect the printer to the new network name "my unique SSID" as example. If you need further assistance, list the exact model of your router
I was an HP employee
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Two office jet pro 8500 printers set up to operate wirelessly from one computer

I have two office jet pro 8500 Wireless printers in my real estate office. I would like for them to both operate wirelessly from one computer, but can't get it to work. I do not have any firewalls enabled. I can get only one to work.

Do you have a network (wireless router) in your office that you are trying to connect the printers to or are you connecting directly to each printer via its "hpsetup" network?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Office Jet 4500 G510n-z fails to print on wireless network

Similar Messages

Maybe you are looking for