HP Office jet 4630 Wireless Installation

XP operating system on old computer. Using netgear wireless router and USB Netgrear doggle to connect to the router. Attempted to install HP Officejet 4630 Printer. Got error 1603 /driver store/yeti/hpvyt12.inf error with message to say .... Problem installing hardware... Broadcom 440X10.100 Int Controller jumpstart wireless intermediate driver error. Tried the troublrshooter solution suggested it might be a USB connection to the printer ..... there was a USB connection to a Brother label printer which I disconected, uninstakled process and tried again ...... no solution got the same message again some 95+% into the installation process!!! Any ideas. Cheers PekingOld China

Hello there! Welcome to the forums @pekingoldchina ,
I would suggest trying all of the steps from the guide below for the problem you're having when installing your Officejet 4630 on your Windows XP system. Afterwards you should be able to install the printer successfully!
Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
Have a terrific Tuesday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

I have a HP office Jet 4500 wireless All- In One, how do I delete the customer participation program

Hi
The customer Participation Program is taking up so much space that I want to remove it from my laptop.
I have a HP Office Jet 4500 wireless All In One. When I attempt to remove it I get a message that says if I remove the program
my device will no longer work.. How can I safely remove it without damaging my equiptment from working?

couple of questions about this:
Are you scanning from the printer, or with software on the computer? If from the computer, are you initiating the scan from Windows, HP software, or Word?
If you put a legal size document in the feeder, and press scan, unless the defaults have been changed to letter size, it should scan the entire legal size sheet. You should be able to go into the settings and change that if the default has been set to letter.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

How do i print from an acer c720 chromebook to hp office jet 6500 wireless?

How do i print from an acer c720 chromebook to hp office jet 6500 wireless? Many thanks!
This question was solved.
View Solution.

Hi @neeter888   welcome to the HP Forums. I understand you are trying to set your HP printer up to print from your Chromebook.
Using Google Cloud Print with your HP Printer
Getting Started with Google Cloud Print
If you do not have a Windows or Mac computer, you can tell your printer to connect to your router from the front panel as follows:
Connect to the wireless network
    Press the Setup button on the printer control panel.
    Press the Right Arrow button to select Network Settings, and then press the OK button.
    Press the Right Arrow button to select Wireless Setup Wizard, and then press the OK button.
    Follow the on-screen instructions to complete the network setup.
Here are several other ways to connect to your network if you need it:
Installing the Printer Software on a Wireless or Wired (Ethernet) Network
I hope this helps
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP office jet 8600, wireless not working, IP address not being recognized

Purchased new HP office jet pro 8600 N911a. Inserted CD software on relatively new Toshiba laptop using Windows 7, but problem is that printer IP address is not being recognized. Wireless router is Apple airport extreme. Have checked various potential solutions, including the following: deleting software and re-inserting CD, turning off router, computer, printer and resetting, running a wirless network test (no problems found, wireless on and working and connected), ensuring that laptop and printer are on the same wirless network (yes), ensuring that printer IP address is entered correctly, and ensuring that firewall issues are not a problem. Airport extreme settings show this printer's MAC address as a "wireless client" and its IP address as a "DHCP client"; however, when clicking on the "printers" heading in Airport extreme printers, no printers are listed (this is the pane that shows the USB printers connected to your Airport wirless device). Any suggestions would be appreciated

Hi,
Why don't you connect the printer wirelessly to your Airport Extreme?
You may do so by clicking the Wireless icon on the printer screen, click Settings and follow the Wireless Setup Wizard to connect the device, then it should recieve its own IP by using the printer capabilities..
If you prefer to use such a Print Server configuration, you may try using a different USB and check if that may help, otherwise I would suggest you to contact Apple as they know their accessories the best..
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Office jet 8500A wireless's, my eprint doesn't respond, says not available

HP Office jet wireless,HP8500A, Windows XP,
Is there a way to find out what my printers correct email address is? It does not respond to the original email address which was {Personal Information Removed} It replies not available. I have only used this once and it worked, now I'd like to be able to use it and I can't. Thank you. Liz

Hello Liz,
If you press the Setup icon and go to Web Services Menu, you should be able to choose Display Printers email address to verify that you are using the correct email address for the printer. If you are having issues with this then you can Restore the Factory Defaults within the Web Services Menu and you should be assigned a new ePrint email address for the printer.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

HP Office Jet 4630 Printer seems to be installed correctly but doesn't print

I have Windows Vista on my laptop and am trying to install a new HP OJ 4630 e-all-in-one wireless printer. Drivers installed completely. I can see the printer just fine on my network. I can scan from printer to laptop. But I cannot print from this laptop. A print error message will pop up saying that the software cannot see the printer. Is the printer installed?
Using the HP Print and Scan Doctor, a test page will not print, but an internal page will. There seems to be some sort of port config error. Any suggestions? Thanks.

Hi @harleywish
I wonder if the issue might be related to the print spooler rather than a port. Please try bypassing the spooler to see if you can print directly to the printer.
1. Click on start and go to devices and printers.
2. Right click on the printer and click on printer properties.
3. Choose the option "Print directly to the printer".
4. Click apply and then ok.
If this works follow the next steps and try to print again.
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box
Type services.msc and press Enter
Locate Print Spooler and double click on it to open the Spooler properties
Make sure startup type is set to Automatic, if it is not please click on the drop down and choose Automatic
Under Service status, please Stop the server, and then wait a moment and click Start
If bypassing the spooler does not result in a successful print, let me know.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Office jet 4500 wireless cannot print from Internet Explorer 9

Since I installed IE9 I can no longer print webpages and I get an errormessage when I try to, whereas printing in MS Office works just fine.
My OJ 4500 Wireless is installed on a Windows 7 (64 bit) machine.
I tried solving the problem by downloading and installing the latest full version driver, but the problem persists.
Who can help me?

Hi ATOL,
It sounds like you might be selecting properties instead of "printer properties".
Double check and make sure that you're selecting "printer properties" from the list.

Office jet 4630 will not enable web services

I have the printer installed on my computers wirelessly and the wireless connection says it is excellent but when I hit the button to connect it to enable web services I get an error telling me that my printer could not connect to the server. Tells me to check my internet connection or the proxy settings. I have checked everything, including the proxy settings and nothing has helped. I contacted HP customer service and they were about useless. I contacted my ISP as suggested to help me with my proxy settings and they were just as useless. I am fed up and ready to return the printer, but I would really like the instant ink program. I am not sure if this is just a problem with this printer or all of these types of printers. Any help would be appreciated on how to get this fixed or what to do, that is not someone telling me that I need to talk to someone else. I even had my son who is a computer engineer try to fix it and he couldn't do it, so I am baffled. HELP!!!

Hi Theladie and welcome the HP Support Forum. It sounds like the printer is on your local WiFi network but does not have internet connectivity. Here's what you can try to resolve this issue:
Get the printers IP address (this should display under the wireless menu on the front panel) and enter it into a browser on an internet connected computer
This brings you to the printers embedded web server (EWS) page
Click on the Network tab and then on the Networking link at the left hand side of the page
Click on the Network Address (IP) option, toggle the Manual DNS Server button and enter the following settings:
This solutions has worked for other people experiencing the same problem, hope the information helps.
Best
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

HP Office Jet 4500 Wireless/Scanning Problem

After initial set up. All works well. Then scan feature does not work. Error message is for LCD update. Presently using Windows 7, 64bit, linksys E3000 router.

Give this a try. Download and run the following utilities from the www.hp.com/support: Click on the following link: Hp Home Network Diagnostic Utility. In you have a wireless connection: This tool will help check the wireless connection.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-88884-2&lc=en&dlc=en&cc=us&...=
Next run the HP Scan Dignostic Utility. This utility will help find any scan issues.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-90930-1&lc=en&dlc=en&cc=us&...=
Please post the results.
Although I am an HP employee. My ideas and opinions are my own and not of HP.

How do I print from my Samsung NC10 netbook to my HP Office jet 4620 wireless printer

I have set up my wireless printer on my HP desktop PC. - works fine - Windows 8
How do I set up my Samsung NC10 Netbook to enable me to see the printer - Windows XP.
My netbook does not have a CD/DVD driver.
I am not sure what software I need to downoad as I am a novice.

Hi,
Please download drivers from the following link and install on your Windows XP machine:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=51916...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do i switch from copy mode to print mode on my office jet 4500 wireless?

Having trouble switching back to print mode on my printer? I can only switch from copy to fax to scan. How do I switch to print???

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP 8505 Office Jet Pro Wireless

I have a Vista OS and suddenly, after 18 months, I can no longer print to the HP. I tried to reinstall the software, but it tells me but it tells me that it is not compatible with Vista. Can someone explain how to resolve this? The only thing different is I uploaded Adobe Acrobat update shortly before I noticed it was not longer printing from my computer. Many thanks for your help!

Are you using the A909 or the A910 series of 8500?
How are you connecting the printer to the computer?
Did you try to reinstall using the software CD or a download?
HP designed a quick and easy tool that diagnoses and resolves many printing, scanning, and connectivity problems: The HP Print and Scan Doctor. HP recommends that you download and install the Print and Scan Doctor any time you need to troubleshoot a problem with your HP printer from the link below.
Let me know what errors you receive?
http://goo.gl/3DAkq
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Office jet 6000 wireless printer ink usage and no support

I would like to know if anyone else has this problem with their printer.
I print in 98% of my work in black ink. My settings are on fast draft, black ink only, yet my colored ink is running out, fast. How could this be? I have the XL cartridges (700 pages, so the box says) and they look to be the exact same size as the regular (300 pages). I just replaced the 3 colored ink cartridges a couple of months ago, printed no more than 20 pages with a little color (mainly blue and gray), then all of a sudden, my printer say's I'm out of all the colored ink and it wont print at all. I can take the cartridges, run some paper under the ink holes and get ink all over it. And when i call hp, they tell me that it uses the colored ink even though I'm printing in black. How? They tell me to buy another cartridge and keep track of how much in color i print. Hellooooo.. I've told them how much I'm printing in color. They also tell me that i need to pay for tech help because my printer is no longer in warranty. (18 months old). I've called about this twice and they give me the same answer. Printing in black still uses colored ink.
the last person i talked to, last night, said it may even be a problem with the mechanic part of the printer, which is covered. Well, if its covered then why cant i get another answer besides "buy more ink".
does anyone else have this issue? What do you do to solve it?
Consumer Reports listed this printer as one of the best, and the ink cartridges gave you the best bang for you buck. Yeah, ok...
You would think that if they know they have this issue, they would do more to help their customers out.

From http://www.hp.com/pageyield/articles/us/en/InkUseage.html
Some color ink may be used when printing black text-or-graphics. There are several circumstances when color ink may be used—primarily to improve print quality, and sometimes to improve printer reliability—even if the document appears to be only black text-and-graphics. Many HP printers utilize chemical interactions to improve the quality and permanence of plain paper black text-and-graphics by adding small amounts of color ink to certain black areas.
While I am an HP employee, I am not a expert on all our products. If I offer advice, I'm not speaking for HP on how to solve an issue, but I'll do my personal best to help you.

HP Office Jet 4630 e-All-in-One Series

How do I get the printer to recognize Legal size paper (8 1/2 x 11). It is nowhere on the drop down list of paper sizes available.

Hi , Welcome to the HP Forums! I understand that you are wondering how to get the printer to recognize legal size paper. (8 1/2 x 11). I am happy to help! I would recommend to try our HP Print and Scan Doctor, to verify that everything is installed, and working properly. Then I would try a custom size print. Hope this helps! “Please click the Thumbs up icon below to thank me for responding.”

Wireless HP Office Jet Pro 8500 - Cannot scan to computer

I am running a HP Office Jet 8500 Wireless and cannot "scan to computer". When I select "scan to computer", I receive a message (on the printer face) that says "Refer to device documentation to troubleshoot". I have done everything in the troublshooting guide, even though they are not addressing my problem, but all done with no success. I am running Windows 7.
Any suggestions? thanks for the help!
Robin
Destin, FL
This question was solved.
View Solution.

Good day Robin,
Thank you very much for your replies and efforts! My sincerest apologies for not knowing that Windows 7 Professional 64 bit was not supported with the tool! I have learnt something new from you and I thank you immensely for that!
We can try the Level 3 or 4 uninstall manually, instead of running the tool. I just figured the tool would be the easier method. Here are the steps for you.
There are 2 ways you can run either of the Levels:
From Original installation CD:
1. Insert CD into drive, and then cancel the installer
2. Open 'Computer', and then right click on the CD drive and open
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Perform a Clean Boot
9.. Run the download to reinstall the printer ( HP Officejet Pro Full Feature Software and Driver )
If software was downloaded and extracted to your system from the driver download:
1. Click on Start and type %temp% in the search field, open the folder
2. Look for, and open the folder starting with 7z (Example: 7zS2356) (If there is more than one, choose the most recent folder)
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Perform the Clean Boot
9. Download the full feature software and driversHP Officejet Pro Full Feature Software and Driver )
I really hope this does the trick!
Happy Thursday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Office jet 4630 Wireless Installation

Similar Messages

Maybe you are looking for