HP OFFICE JET 5510 STOPPED PRINTING

We use a hp Officejet 5510 All-in-One to do our printing, scanning, faxing.
We purchased an OS upgrade a few months ago so we could install Apples's, Magic Trackpad.
Now the OS is 10.6.8
The printer has worked fine since the upgrade, for printing.
We havn't needed the printer to do anything else until yesterday when I needed a scan. 
It wouldn't do it. 
Long story short, I reinstalled the printers' driver using the CD disk that came with the printer.
Scanning worked great. 
But, now it won't print.
1.  Ran "Software Update" program.
It recieved and I loaded the software it brought in. 
2.  Went to HP's website and downloaded anything that looked like it applied.
No-go
I read their tech communities advice for this snag. 
I didn't understand it. 
3.  Looked at Apples' Suppport and found a downloadable file called, HP Printer Drivers v2.10 OS X for HP printing and scanning software for OS X Mountain Lion, OS X Lion and Mac OS X v10.6 Snow Leopard.
No luck.
4.  Have tried restarts with no luck.
Any suggestions?

Try clearing the print/scan/fax queue, remove the 5510 from your printer list, and then reinstalling it

Similar Messages

  • My hp laser jet 4050N stopped printing. What can I do?

    My hp laser jet 4050N stopped printing. What can I do?

    1. Please provide the year model of your iMac and which OS X it is running.
    2. Reset your Printing System,
    for 10.9 see > OS X Mavericks: Reset the printing system
    for 10.8 see > OS X Mountain Lion: Reset the printing system
    for 10.7 or earlier see > Mac OS X: How to reset the printing system
    3. Test your printer, try printing from a different computer.
    4. Go to HP > Troubleshooting Guide for Laptops, Printers & More | HP ® Support

  • Dissatisfi​ed with HP Office jet 6700 Premium Printer

    I've had a HP Office Jet 6700 Premium Printer for 18 months and have encountered a failed printer head issue which essentially requires full replacement of the printer.  I've seen many other similar reports by others which clearly indicates this printer has a serious problem with the printer heads.  I'm getting ready to replace this printer, which is just 6 months out of warranty, and will seek another vendor to provide printing equipment.  Very disappointed in HP's printer product and will gladly provide input to help others avoid running into this problem.

    Please read this post then provide some details.   What operating system?  What are the error messages on the printer or computer screen?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How do I get an Office Jet 6500A to print on Card stock?

    How do I get an Office Jet 6500A to print on card stock. It pushes the card stock through the printer but will not print and tells me I have not selected the right print media. There is no selection for card stock.  I have tried every selection.  I assume there are other media definitions that can be downloaded but they certainly are not apparent.  I have been doing this job on all my other HP printers for years.  Suddenly this printer balks.

    Hi,
    Page #22 of the manual says (must be the same as photo paper ?):
    To load cards and photo paper
    1. Lift the output tray.
    2. Slide the paper width guide out as far as possible.
    3. Insert the media print-side down along the right of the main tray. Make sure the media aligns with the right and back edges of the tray and does not exceed the line marking in the tray. If the photo paper has a tab along one edge, make sure the tab is pointing towards the front of the printer.
    4. Slide the media guides in the tray to adjust them for the media size that you have loaded.
    5. Lower the output tray.
    6. Pull out the tray extender.
    And the manual is : h10032.www1.hp.com/ctg/Manual/c02519721.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How can i get my hp office jet j4550 to print from word 7?

    How can I get my HP Office Jet j4550 to print from the Microsoft Word 7? I downloaded the drivers for the printer and reinstalled Microsoft Word 7. 

    Do you mean Windows 7?
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

  • How to rollback driver for Office Jet 6500 APlus Printer

    I recently updated the driver for my Office Jet 6500 APlus printer and do not find it to be useful or efficient for my purposes. The printer is connected wirelessly  to a Dell Inspiron 1720 laptop PC running Windows 7 Home Premium. Can anyone tell me how to roll back the printer's driver to the one previously installed which is the one that came with the printer when it was purchased about 4 or 5 years ago.

    Hello oldhand,
    Welcome to the HP Forums.
    I see that you are having some printing issues since you have updated the driver.
    I have a few steps that I think will help us.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I am also going to give you detailed instructions for Uninstalling the Printer Software.
    Once the printers software and drivers have been removed, please click on the following link for the HP Officejet Full Feature Software and Driver.
    Please fee free to write me back if you have any other questions.
    Cheers,   
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • COMPATIBILTY OF MY WIRELESS OFFICE JET 4500 G510N PRINTER WITH THE IOS AIRPRINT SOFTWARE

    IS MY WIRELES OFFICE JET 4500 G510N PRINTER COMPATIBLE WITH THE IOS AIRPRINT SOFTWARE IN THE IPAD2
    This question was solved.
    View Solution.

    No. You can use it with the ePrint mobile app for iOS devices. You can find out more by following the links below. Hope this helps.
    Supported Printers for the HP ePrint Mobile App or HP ePrint Home & Biz:
    http://goo.gl/RsNpf
    HP ePrint Mobile Apps FAQs:
    http://goo.gl/33WFq
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How to set up Hp office jet 6600 to print from the iPad air? In a wifi setting.

    How can I print from iPad air to the HP office jet 6600?

    Hi Big-apple
    Check out the link below....
    http://www8.hp.com/ie/en/support-topics/mobile-printing/how-to-print-mobile-devices-ipad-iphone.html
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • I just installed a new hp 8500 office jet. i can print from adobe, explorer, one note but not from a mozilla page.does anyone know how to fix this ? my 8500 worked just fine with mozilla

    My printer is an HP 8600 OFFICE JET. I cannot print anything when using mozilla. when i'm using explorer and i go to yahoo or yahoo finance or any other website print my stock portfolios, email, etc. but i can't do that when i'm in mozilla.
    I didn't have that problem with my HP OFFICE JET 8500.
    HP support hasn't been able to resolve the issue.

    Does that printer appear in the "Printer -> Name" drop-down and can you select it?
    See the screenshot below ...

  • Setting up e-printing on HO Office jet 7500 series printer

    how do i set up e-printing on my HP Office jet 7500 E901a

    Hi samuelesse,
    You can follow these steps to set up ePrint on your 7500.
    1. Press the right arrow on the printer’s front panel, then press the “Setup” button.
    2. Press “Web Services Setup”, and the process will begin automatically if Web Services has not been previously configured (if Web Services has been configured previously, it will show “Printer Email Address”, “ePrint On/Off”, etc.)
    3. Press “Continue”, then “Yes” to accept the Web Services Terms and Conditions. After a short configuration period, an “HP ePrint mobile printing” page should print. This page contains a unique printer code, which we will need in the next step.
    4. Go to http://www.eprintcenter.com.
    5. Click “Sign In”. If you have already set up an account, enter your ePrintCenter account information to sign in. If you have not already set up an account, click “Sign Up” and create a new account.
    6. Click “Add Printer” (the big blue button to the right of the printer picture), and when the “Add a Printer to your Account” box appears, enter the printer code found on the “HP ePrint mobile printing” page. Click “OK”, and then click “Next”.
    7. Enter a custom email address for the printer, and click "Save" to confirm the settings.
    Once you've done these steps, you'll be ready to go.  All you need to do to use ePrint is send an email to the address you set up for the printer.  
    Let me know if you have any other questions, or if you have any problems during this setup.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Office Jet 8000 -- Duplex Printing -- back side upside down

    When printing a booklet on my Office Jet 8000 A809, using duplex printing, the back side of each page is upside down.  Operating System is Windows Vista.  I'm sure there is a simple solution, but I can't find it.  HELP.

    Choose the type of duplex - you probably have Short-edge binding enabled.  Change it to Long-edge binding.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Office Jet 4500 G510n Printer Ready but error comes up in status

    I have a Office Jet 4500 G510n and a MacBook Pro 15 late 2006 Model 2, Ver 10.6.8
    I upgraded the HD to a SSD and everything works find except the printer. I can go to Utility and the TEST PAGE prints OK.
    However, on STATUS it reads: "error/library/Printers/hp/cups/inkjet1.driver/contents/macos/injet/failed
    I have checked on drivers and all I saw were for the "extra Page" ...
    Lost!!!!
    This question was solved.
    View Solution.

    From research on this HP Support site, I found that in Mac OSX they auto download updates for printing. Did not think about transfering my old HD to a SSD that those updates would follow... they did not. So... I downloaded all the updates (driver)to my new SSD and the HP Printer works!

  • Mac to Office Jet Pro 8600 printer

    I have a IMAC desk top connected to an Office Jet Pro 8600 running MAC OS 10.6.8.  I cannot get the scanner to scan photo's to a specific size.   I use the HP Utility but no matter what I try to do the scanned image only cooies from the front right corner of the scanner glass.  How do I change the JPEG scanner size and how do I scan whatever size image I place on the glass?
    This question was solved.
    View Solution.

    Hi @paul8588,
    Welcome to the HP Forums!
    I noticed that you are trying to scan photos to a specific size with your HP Officejet 8600, and I am happy to help!
    I would recommend the following:
    Reset the printing system. Mac OS X: How to reset the printing system.
    Verify and repair disk permissions. Disk Utility 12.x: Repair disk permissions. 
    What size of paper are you trying to scan on the glass?
    If the above recommendations do not solve your issue, please see this guide. How to Scan: Mac OS X v10.6, and you will see some alternate scanning options without HP software.
    Hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • HP Office Jet 6000 E609n Printer, Cannot reset network settings.

    Hello,
    I was setting up a static IP address for the HP Office Jet 6000, upon attempting to set it up. I forgot to set the default gateway to match the IP address. Now that it is set that way I cannot access the GUI for the printer. I have tried doing the reset by holding down the wireless button and pressing resume three times. I have literally unplugged it from the back and from the wall and that did not resolve the issue. Also, unplugged it and waited 30 more seconds plugged it back in and did the button reset a swell. Noone of these resolved anything I am stuck and cannot even access the controls to change the router. Help will be very much appreciated.

    You may try and do the network defaults and the factory defaults on the printer and that should reset the ip address for you. I'll try and see if i can get the combination for you for this printer. Let me know if this works or if you are still not able to get into your settings.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Hp office jet doen't print wirelessly

    Hp office jet is online when i print wirelessly it doesn't print and in the print queue there is error printing message.
    i try to add TCP/IP but it doesn't assign the printer to the TCP/IP port . However, i am sure i use the correct IP address of the printer.

    Hi @HossamSwaify,
    Thank you for visiting the HP Support Forums!  I see you are unable to print wirelessly to your HP Officejet 7610 with your computer running the Windows 7 Operating system.
    To better help you leave me with the following information:
    1. What is the exact error message when you attempt to print, does it say 'offline' or just 'printing error'?
    2. Have you ever been able to print wirelessly to the OJ 7610?
    3. Have you recently upgraded to Windows 7, or installed any updates?
    4. Do you have any Firewalls that could be blocking the communication?
    First go ahead and run the HP Print and Scan Doctor > www.hp.com/go/tools
    -- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    What does the PSDR find?
    I hope to hear from you soon!
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Maybe you are looking for

  • Error when opening the database with resetlogs

    ORA-00603: ORACLE SERVER SESSION TERMINATED BY FATAL ERROR WHEN I open the database with RESETLOGS

  • HT204291 PB Miroring Imac Apple TV

    hello since the update maverick, a copy of TV on mac with apple tv not working, black screen on the TV. everything else works perfectly.  I shaped into refined the network, the apple tv, and nothing could be done. the network is the same and works we

  • Debugging of Material usage Variance

    Hi All, We have a Z report for Monthly Material Usage Variance for reporting. The SAP Material Variance report is not calculating the Material Usage Variance Quantity & Value correctly for production order that have a target quantity and actual quant

  • Loading Camera Raw 5.5: CS4 and PE6

    I have both Photoshop Elements 6 for the Mac and CS4 Extended, which I recently installed.  I want to install the latest Camera Raw Plug-in for use in both programs, but it seems to only recognize the new plug-in in CS4 but not PE6. I downloaded the

  • General Snow Leopard Problems

    Since upgrading to SL I have noticed a distinct degradation in performance of my MacBook. The major problem is with the finder. It sometimes just stalls, nothing works for ages and then suddenly it just kicks back into life. The battery icon also fai