HP Office Jet 6500aPlus not connecting to wireless

I have an HP Office Jet 6500aPlus, alomst 2 years old, working well.  No major issues.
A couple of days ago, the printer showed offline.
I have done the following:
(a)  Unplugged the printer, reconnected to the wireless, printer the test page and it shows connected.
(b)  From the 3 laptops and iPad at home, all show printer offline.
(c)  I tried to go to apps from the printer, states no wireless access.  
           Did check the wireless connection, states connected.
(d)  Connected USB cable and printed successfully.
What might be the best way to get the printer on the network again!  I am an HP employee, so totally thrown off with this issue.  
Thanks!!

More than likely it is not going to work then. Getting printers to work wirelessly with hot spots is something that is not always guaranteed to work. I've seen it work, but it is very rare.
Do you have any firewalls or virus-protection set up on your computer? 
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

  • Bluetooth on office jet 150 not connecting

    I have a Sony Vaio running windows 8.1 It sees the printer under bluetooth settings but it says missing driver ? 
    It works fine with a cable but sadly not by bluetooth 
    Please help
     Thank you
    This question was solved.
    View Solution.

    Thank you that seemed to fix the issue. Only small hiccup now I need to turn printer off and on to re istablish connection if I shut my computer off and then on again . Which is no big deal .
    Thank you for your help

  • Have a 802.11n time capsule, the range of the wireless network has shrunk down to nothing over last few days. Used to be able to use wireless network anywhere in house, but now can only use in my office. Will not connect to iphones, ipad, itouch, or noteb

    Have a 802.11n time capsule, the range of the wireless network has shrunk down to nothing over last few days. Used to be able to use wireless network anywhere in house, but now can only use in my office. Will not connect to iphones, ipad, itouch, or notebook. Worked fine last week, but over weekend just started having issues.

    It is very possible that you may have some form of Wi-Fi interference that has appeared recently that is preventing your Time Capsule (TC) from providing a clean RF signal.
    I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible. Look for other Wi-Fis that may be operating nearby. Note those with the strongest signals and which channels they are operating on ... then change the channel used by the TC to be at least 3-5 channels away.

  • Can not connect my wireless printer to the new router.

    Can not connect my wireless printer to the new router.

    Can you please provide details:
    1.  The make and model of printer
    2.  Make and Model of Wireless Router
    3.  Is your printer connection wireless to router or a cable to PC
    4.  What have you done or attempted to do to establish a connection?
    5.  Any further info to assist

  • IPod nano does not connect with wireless earphone via bluetooth transmitters.

    My iPod nano(6th) can not connect with wireless earphone via bluetooth transmitter.
    I want to know which is wrong iPod nano or bluetooth transmitter...Now I tried with i10s because I thought previous one (motolora) might be wrong.
    But both can not connect.

    Sounds good.  Hopefully they can provide you with an accurate answer.
    B-rock

  • IOS7 update failure w/ error "Not Connected to Wireless", but I am connected- How can I update?

    My iPad has the defective "gotofailure" bug in iOS7, but there is only 1 pending update which describes a completely unrelated issue.  I am connected to my Wireless LAN, and that connection works fine.  But, when I try to download and install the pending update (Which may or may not have the major security hole fixed), the update fails with the error message "not connected to wireless".  How can I get someone at Apple support to tell me how to get around this problem?
    What am I supposed to do when the fix for a major bug is blocked by another (apparently minor) update?
    (note:  I am over the 30 day warranty, but within the 1 year warranty.  However, Apple support wants me to pay $20 to have them tell me how to fix their defective software... 
    I expect that the 1 year warranty should apply to defective software, especially this major security bug! 
    This bug completely compromises browser and internet security... it is a HUGE deal!
    see:  http://www.wired.com/threatlevel/2014/02/gotofail/   ).
    This is my first Apple product since the Apple 2E.  If this is the level of customer support and warranty for defects, hardware or software, that Apple provides, it may well be my last apple product. 
    I have worked in customer support at another major computer company, and this type of policy is the surest way to send customers to your competitors that I know of.  Tim Cook, are you listening? 
    (P.S.  Don't bother trying to get the attention of any Apple Executive - they don't want to hear from customers to provide feedback on their products or policies - not by phone nor by email.)
    Any workarounds for the problem or a way to update the iOS7 to fix the security hole will be greatly appreciated. 

    Hi...
    I think here the issue may be that the utility and the internet connection are not getting synchronised. The operating system on your computer is it win XP? If it is win xp, u can use the windows wireless software to manage to your wireless network. In order to use the windows wireless zero configuration, right click on the linksys icon at the bottom right hand corner of the task bar, select the option that says "use windows wireless ....".
    The linksys icon will be grayed and windows will be managing the wireless network. Connect to your wireless network and you should be able to go online.

  • After recent apple update MBP will not connect to wireless internet

    After running recent Security and Airport upgrades my Mac Book Pro (Intel) will not connect to wireless home router supplied by Verizon (GTE) and several public wi-fi's. Cannot get IP but sees networks. My iMac PPC still works fine. Prior to upgrade everything worked fine at home and abroad to other public wi-fi's. MBP still connects at work with AppleBase wireless. Can the upgrade be removed? Is there a simple fix? Should I wait for apple to fix this and break something else.... If not broken don't fix it..

    I'm having similar issues.
    I have 2 MBP's. The newest one is about 1 month old and has never been able to connect to a WPA network. The older MBP is 20 months old and was originally installed with Tiger and gradually updated via Software Update and a retail copy of Leopard and subsequent Software Update updates to 10.5.2. Interestingly, this MBP was always able to access my WPA network until I decided to do an erase and install. I installed the retail copy of Leopard and was subsequently unable to access my WPA network. So, I went back to my Tiger install disks - but I'm guessing that whatever Leopard did *possibly* updated the firmware of the airport card as, even under Tiger, I could not access my WPA network (yes, I agree it seems unlikely that an OS update would/should update firmware but I am grasping at straws).
    Trying to further understand the problem , I noted that the Network utility in System preferences would always show either a connection error or a connection timeout whenever I attempted to join my WPA network. I turned on syslog in my router and attempted to rejoin the network and saw the following errors:
    <150>Apr 30 21:25:17 Vigor: WLAN_DBG - MLME Disassoc MAC 0:1e:ffffffc2:ffffffc0:ffffff9c:3b
    <150>Apr 30 21:25:17 Vigor: WLAN_DBG - MLME Disassoc MAC 0:1e:ffffffc2:ffffffc0:ffffff9c:3b
    <150>Apr 30 21:25:17 Vigor: WLAN_DBG - athgdeauthclient 0:1e:c2:c0:9c:3b
    <150>Apr 30 21:25:17 Vigor: WLAN_DBG - Wpatimeouthandler
    <150>Apr 30 21:25:14 Vigor: WLAN_DBG - WPA handshake timeout, disconnect 0:1e:c2:c0:9c:3b
    <150>Apr 30 21:25:14 Vigor: WLAN_DBG - Wpatimeouthandler
    <150>Apr 30 21:25:13 Vigor: WLAN_DBG - send 3rd packet in 4-way handshake
    <150>Apr 30 21:25:13 Vigor: WLAN_DBG - RSN, Send key to: 0:1e:c2:c0:9c:3b
    <150>Apr 30 21:25:13 Vigor: WLAN_DBG - Wpatimeouthandler
    <150>Apr 30 21:25:12 Vigor: WLAN_DBG - send 3rd packet in 4-way handshake
    <150>Apr 30 21:25:12 Vigor: WLAN_DBG - RSN, Send key to: 0:1e:c2:c0:9c:3b
    <150>Apr 30 21:25:12 Vigor: WLAN_DBG - Wpatimeouthandler
    <150>Apr 30 21:25:11 Vigor: WLAN_DBG - send 3rd packet in 4-way handshake
    <150>Apr 30 21:25:11 Vigor: WLAN_DBG - RSN, Send key to: 0:1e:c2:c0:9c:3b
    <150>Apr 30 21:25:11 Vigor: WLAN_DBG - Rx message 2 in 4-way handshake
    <150>Apr 30 21:25:11 Vigor: WLAN_DBG - parseEAPOLKey
    <150>Apr 30 21:25:11 Vigor: WLAN_DBG - EAPOL_KEY
    <150>Apr 30 21:25:11 Vigor: WLAN_DBG - WpaEAPoLhandler, from 0:1e:c2:c0:9c:3b
    <150>Apr 30 21:25:11 Vigor: WLAN_DBG - EAPoL_handler, from 0:1e:c2:c0:9c:3b
    <150>Apr 30 21:25:11 Vigor: WLAN_DBG - send 1st packet in 4-way handshake
    <150>Apr 30 21:25:11 Vigor: WLAN_DBG - RSN, Send key to: 0:1e:c2:c0:9c:3b
    <150>Apr 30 21:25:11 Vigor: WLAN_DBG - WPA handshake start for 0:1e:c2:c0:9c:3b
    <150>Apr 30 21:25:11 Vigor: WLAN_DBG - WPA2 capable client
    <150>Apr 30 21:25:11 Vigor: WLAN_DBG - MLME Associate MAC 0:1e:ffffffc2:ffffffc0:ffffff9c:3b
    Strongly suggesting that the MBP is not completing the WPA handshake.
    Any ideas as to where my investigations could progress? (The router manufacturer tells me that the WPA timeout handler is not configurable on the router).
    TIA
    Pat

  • Can not connect to wireless networks with ipad 2

    My ipad used to connect to the wireless net at home and in public areas.
    Now all by the sudden it can't "see"  the network.
    Message: " could not connect to wireless network"
    I have tried "everything" also on different networks,
    except resetting the modem.
    My iPhone works, as do all my other computers.
    Modem is Zyxel P2812

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Can't use apps because it says I'm not connected to wireless network

    How do I use apps if it keeps saying I'm not connected to wireless network when I'm connected to wifi and have data connectivity??

    rixxy12345 wrote:
    How do I use apps if it keeps saying I'm not connected to wireless network when I'm connected to wifi and have data connectivity??
    Which apps?
    Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

  • G410 not connecting in wireless

    I have a G410 notebook model 2049 52q with gemtek wireless lan card.
    I hv installed win xp sp2 with all drivers.  But it is not connecting to wireless router of DLink or Linksys.
    No light for wireless is glowing. While other Lenovo notebook of N series is connecting fine with router.
    G 410 is not connecting with another wireless laptop. It just does not show any wireless network in range
    Message Edited by Rajhans on 09-24-2008 06:05 AM

    To make wireless network working you must match three conditions:
    1) Drivers are installed (no yellow marks in Device Manager)
    2) Hardware switch is ON (it's on right side of notebook, near power chord)
    3) Fn+F5 utility is working.
    Check these please and post back if everything is as described.
    //help will save the world

  • IPad will not connect to wireless

    iPad will not connect to wireless network, keeps trying but will not connect.  Working on our other iPad that has no issue connecting to the same network

    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    And this - Unplug the charger from the iPad and then replug. May resume charging.
    Or - Recalibrate the battery. See link below.
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    What to Do If Your iPad Won't Charge
    http://ipad.about.com/od/iPad_Troubleshooting/a/What-To-Do-If-Your-Ipad-Will-Not -Charge.htm
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • Ipad will not connect to wireless.  Both connect fine to everything else.  Any suggestions?

    Ipad will not connect to wireless.  Both connect fine to everything else.  Any suggetions?

    Ipad will not connect to wireless.  Both connect fine to everything else.  Any suggetions?

  • My iPad 2 will not connect to wireless.  It recognized the wireless address but when I enter the password it just spins

    My ipad2 will not connect to wireless.  It recognizes our router but when I put in password it just spins.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How to Change Your iPhone’s (iPad’s) DNS Servers
    http://www.macinstruct.com/node/558
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HP Deskjet 3000 does not connect via Wireless to Windows 8.1 any more

    Good day. My job requires me to move with my laptop (Asus X54C with NO bluetooth, only wireless) between multiple workplaces. One of these offices has an HP Deskjet 3000 wireless printer, which I used with no problem whatsoever under Windows 8.0 64-bit.I didn't even need to install its drivers, because Windows 8 would instantly recognise the driver's wireless signal.
    Then a month ago I decided to update to Windows 8.1: after that, the printer suddenly stopped appearing in my “Network Connections”. I tried to uninstall the drivers and reinstall the 8.1 signed drivers by HP, but to no avail. The printer is recognised and works perfectly with an USB cable. I clearly recall seeing it on the right-hand pane (“Networks”), but since the 8.1 update it isn’t there anymore. The icon in the System Tray tells me that “connections are available”, but I can see no connections at all. In that particular office there is no Internet connection or other wireless connections apart from the HP printer (that however I cannot connect to). I'd like to point out that the wireless function is OK because a colleague of mine can still print using his Mac's Airport connection.
    I have already posted in the Windows 8 (Microsoft Answers) Forum, but nobody has ever answered. You can find the thread here: http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/winows-81-not-finding-wireless-...
    Any ideas?
    Thanks in advance.

    Hi,
    Please reinstall the following package:
        http://ftp.hp.com/pub/softpaq/sp63001-63500/sp6328​7.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can not connect to wireless network any more, missing command

    I can not connect to any wireless network. I have been having this problem for days. In desperation I installed 10.4 in a seperate HD. I clicked on the airport icon in the upper tool bar, selected my network name and clicked on "open internet connect" and I was connected, what?? I rebooted into 10.5 and tried the same thing again. But the panel that opens when you click on the airport icon has NO "open internet connect" command. A couple of weeks ago I reinstalled my OS. I have run diskwarrior and Techtool pro. Thinking back to the time I first installed 10.5 I don't remember ever seeing that command. Is Leopard compatible with the airport card? How do I get my "open internet connect" command back??

    It sounds like a problem between hardware and software. When you select your network, does anything freeze or does nothing happen?
    Nothing happens.
    Try this, open your Network Preference Pane, turn off airport off and delete the Airport connection by selecting "Airport" in the left pane and click the " - " button. Click on the "+" sign and create a new Airport connection. Hit Apply if it is available. Turn AirPort on and try to select your network and login if you can. The status should show Connected and an IP address should show up after of a couple of seconds.
    I get "AirPort has a self-assigned IP address and may not be able to connect to the Internet". On a couple of occasions (over the last couple days) I got you are connected to the internet on IP 172.17.90.251. However when I tried to open a web page I got the banner you are not connected to the internet. Strange, the pref panet said I was the Safari said I was not. Certainly the IP address does not show up in a few seconds. I also have ComCast cable but I need to use the MetroFi-Free wireless so my wife has the bandwidth to do her company work using VPN.

Maybe you are looking for

  • The cursor bubble is minimized and I don't know how to fix it.

    For some reason the bubble under the cursor became minimized so I can't see the words when I hover over a link etc. The bubble works in other programs and even in the Firefox tool bars and on the tabs.

  • Viewing purchases by date added

    Just downloaded 11.0.1.12 and now cannot find a way to sort purchases by date added.  Please help!

  • Where do I find the port mapping option in the new Airport Utility?

    I'm using the new Airport Utility w/ my AEBS. I'm running it in 802.11n '11a compatablity mode" w/ my Macbook (no 11n). I can't seem to see the tab to set my port mapping. Where is it? I don't see it in the Airport or Advanced settings in the Utility

  • E65 orange reception problem

    Hi, Please can someone help me, my E65 reception flicks between full reception to only 2-3 bars or less in a few seconds without me moving. The orange shop have said as usual that it's a phone issue and needs to be repaired. Does this sound right or

  • HT4061 IPad screen rotation

    MY  iPad screen does not rotate. It is stuck in the vertical position constantly. When I go into my fb   I don't have chat