HP Office jet 6700 ,trying to print and it will say Printer Ready, Empty Print File !

I have a HP Office Jet 6700. I'm trying to print a document , it will say prining Untitled . The printer queue will open up and say printer is ready, empty print file,Idle.
It automatically goes into paused printer. When I try to click on the document itself in the print queue and resume print it gives the same message again.
The Power on the actual printer is flashing slowly as well.
I hae restarted my computer and shut down the printer completey multiple times and it still has not worked. I just printed something on this last night so I'm not sure what the probelm is. 
This question was solved.
View Solution.

Hello there! Welcome to the forums @Chinadoll702 
I read your post about the printing issues you've been experiencing on your Mac running 10.6 and your Officejet 6700. I have a few ideas in mind to get started and let me know the results and we will take it from there.
Update the Firmware on the printer: Getting the Latest Firmware and Product Updates
Power reset the printer and make sure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Make a few copies afterwards and tell me if the copies pause, cancel, do not work, etc.
Try printing from Text Edit on your Mac as well, and get back to me with the results.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

  • Office Jet 6700 Premium only prints the same crossword over and over

    My wife likes to do the daily crossword. However now it only prints the same one repeatedly. How do I get the EPrint to roll over to the next day? I have tried cancelling and resetting the app to no avail. Any help is deeply appreciated. I even tried the HP paid service. They were no help.

    Hi,
    It's very easy to add but a bit hard to remove. Please use the following instructions:
        http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mob​ile-Printing-and-ePrintCenter/Re-How-to-add-or-rem​...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Office Jet 6700-Wirel​ess Printer-Ho​w to change the Printer IP Address to the new ISP's IP Address

    Greetings All,
    I have been using ATT DSL with my HP 6700 wireless printer. I have had no problems with wireless printing (save the replacement ad nauseum of the ink cartridges-another issue I posted some time ago).
    Today I had Comcast cable installed.  (So far I am not impressed with the speed-Note to self-post on Comcast site re this).
    I still have access to the ATT DSL. The HP 6700 stores the IP Address and SSID for the ATT. network.  As long as I am logged into the ATT Network,  the HP 6700 prints fine.
    When I switch to the Comcast network,  it does not print. The IP Address that is stored in the printer is the ATT IP address.
    I have tried the UPDATE IP Address option from the Start menu. It does not work.
    How do I get the HP 6700 to print from the Comcast network? 
    Perhaps the printer cannot be accessed on two networks and must be removed from the ATT network before it can be used on the Comcast network?
    If anyone has encountered this problem and solved it please respond.
    Thanks,
    Chris

    Having similiar problem with HP Officejet 4500 All-in-One Printer - G510g-m. Lost connection to printer when disconnecting ATT DSL and moving to Comcast cable internet service. Comcast technician attempted to assist without success. HP instructions ASSUME that the printer is connected directly to the computer. We have a laptop that connects via wireless from modem, works great. Have the printer connected via Ethernet to Comcast modem. Tried to find Comcast IP address (where is that>), but also could not get the function on the printer itself to allow any change to the existing IP address that I assume is from ATT. Just learned that to get help by phone from HP will cost and was directed to the forum. If you have since solved your issue, perhaps you have some pointers for me. I've also had the laptop cleaned recently and found the HP software disk and have proceeded through the installation process up to not getting a solution. Help please.

  • How do I enable the e-cloud on my office jet 6700 and set up its email address

    I have a new iPad that I'm trying to enable to print. (I never had any trouble syncing my old one.) I have followed the instructions but it's still not working. It seems perhaps it's because the printer is not set up for Cloud? Yet, There is an icon on my office jet 6700 that indicates it is cloud capable.

    Hi @Mes17333
    Welcome to the HP Support Forums.  I gather that you are trying to print from your new iPad to your Officejet 6700 printer. 
    I am presuming that the printer is connected to your wireless network as you indicated that you were able to print with your older iPad.  To use Apple’s AirPrint feature you only need to have the printer connected to your wireless network and that the router supports Bonjour communication.
    If you are using the HP ePrint Mobile app or the HP All-in-One Printer Remote app, then please click on either app’s name and it will bring up the appropriate FAQ document which will have the trouble shooting steps to get the iPad printing. 
    Please let me know how things turn out.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Dissatisfi​ed with HP Office jet 6700 Premium Printer

    I've had a HP Office Jet 6700 Premium Printer for 18 months and have encountered a failed printer head issue which essentially requires full replacement of the printer.  I've seen many other similar reports by others which clearly indicates this printer has a serious problem with the printer heads.  I'm getting ready to replace this printer, which is just 6 months out of warranty, and will seek another vendor to provide printing equipment.  Very disappointed in HP's printer product and will gladly provide input to help others avoid running into this problem.

    Please read this post then provide some details.   What operating system?  What are the error messages on the printer or computer screen?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • My HP Office Jet 6700 Premium has suddenly stopped printing from my iPad

    I have a new HP Office Jet 6700 Premium
    It had been working just fine, wireless printing from my iPad.
    iPad shows a window that recognizes the printer, but it does not print.
    There is no error message.
    This question was solved.
    View Solution.

    The steps below typically resolve the issue you’re experiencing:
    1. Power off the printer.
    2. Completely power off the iOS devices (hold the Sleep and Home buttons simultaneously until a message appears asking you to "Slide to power off". Slide across that bar, and it should completely power off).
    3. Power the printer back on.
    4. Power the iOS devices back on.
    5. Try to print again.
    Those steps usually resolve the issue. If they do not, try this additional steps:
    6. Power cycle your router (usually done by unplugging the router’s power cord, waiting 20 seconds, and plugging it back in).
    7. Make sure that the iOS devices and the printer are all connected to the same network, then try to print.
    If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • HT3669 Can't scan from my HP Office Jet 6700 (Fax) to my MacBook Pro

    Hi there, I can't scan from my HP Office Jet 6700 (Fax) to my MacBook Pro. I've tried all of the tips I've found online but when I try to 'Enable Scan to Computer' it says that there is a communication error. Anyone got any tips for me?

    Hi,
    Both printer and computer seem to be on same network.
    Please download and run the following utility to troubleshoot on the issue.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&jumpid=reg_r1002_usen_c-0...
    Also download and install the firmware update from the link below.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-89897-4&cc=us&dlc=en&lc=en&...
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Hp office jet 6700

    I would like to know how to change the order that my printer prints. It is now printing from last to first. I want to change it to first to last. I have a Mac with operating 10.9 operating system. I checked in Hp Utility could find whern to change page settings. I have two printers one is a Photosmart 7510 and the other is HP office jet 6700.IW would like to this on both printers.I had received a post but that ninformation was for windows not a Mac.
    Thanks, WCG

    Hello wlliam,
    I see that you are looking for some instructions on how to change the page order.
    I am attaching a screen shot that will show you where to go to make the changes.
    When you get the document ready that you want to print, click on File and then go to print and this window will pop up.
    Depending on the operating system on the Mac you are using, some minor differences may appear. 
    You can make the changes on the Page Order drop down arrow.
    Please let me know how you make out and if you need any other assistance, please feel free to write me back at any time.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Wireless is not working on my new HP office jet 6700 premium

    Gents,
    i have a new HP office jet 6700 premium all in one printer and i coneccted to the network via wireless and its works only for 2 minutes and after that its not working via wireless unless i disconnected and reconected again please advice.
    FYI it is working very good by USB, and im using Mac OS X 10.9.3 version 
    Regards,

    Hi Kattoa,
    Welcome to the HP forums!
    I'm sorry to hear your Officejet 6700  doesn't seem to be holding it's wireless connection but I'd be happy to help determine what the problem could be
    I think it would be best if you followed this Printer Does Not Maintain Wireless Connection document as it should be able to help determine why the printer has to be reconnected so frequently.
    Let me know how that goes for you!!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Office jet 6100 series not printing from Mac OS X 10.9.3

    office jet 6100 series not printing from Mac OS X 10.9.3. This seems to have happened suddenly. USB hardwired to a new Macbook Pro. HP Inkjet 6 Driver 2.0.3 Any ideas? 
    This question was solved.
    View Solution.

    I would recommend resetting the printing system, then rebooting the mac to allow it to scan for the usb connection to the printer. It should then automatically add the printer back, and if any other updates are needed, it'll ask you to install htem
    http://support.apple.com/kb/PH14141
    *** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
    If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

  • Running Safari 6.0.3  When trying to print files using Adobe Reader 11.0.02, print preview screen is all black.  If files are attached to an email, receiver can't open it.  It does work OK in Firefox 19.0.2  Any ideas?

    Running Safari 6.0.3  When trying to print files using Adobe Reader 11.0.02, print preview screen is all black.  If files are attached to an email, receiver can't open it.  It does work OK in Firefox 19.0.2  Any ideas?

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • I created a multi-layered Photoshop file and the backgroud layer changed to gray and all other layers whacked out. I tried reopening it and restarting photoshop. What happened to my file?

    I created a multi-layered Photoshop file and the backgroud layer changed to gray and all other layers whacked out. I tried reopening it and restarting photoshop. What happened to my file?

    Your file is most likely toast, but still:
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • I have been trying to update via App Store and every time only with apple software it starts to download and it will says it's calculating time remaining then an error message pops up saying " An error has occurred the request timed out. (102) "

    I have been trying to update via App Store and every time only with apple software it starts to download and it will says it's calculating time remaining then an error message pops up saying " An error has occurred the request timed out. (102)" I have tried everything , I've been told its my ISP but I have tried using differenet internet to attempt the updates. Like I said all other software updates fine its just apple software

    http://www.apple.com/support/mac/app-store/contact.html?form=account

  • Trying to update and it keeps saying to close Photoshop Elements 13 to proceed but it's not open

    Trying to update and it keeps saying to close Photoshop Elements 13 to proceed but it's not open

    Hi,
    Please restart your machine ,it will close all the running applications.
    On next launch try to apply updates.
    Thanks,
    Shikha

  • I just installed photoshop elements 7 and tried to register and it will not accept my email address

    I just installed photoshop elemants 7 and tried to register and it will not accept my email address.  Help please.  [email protected]

    Hi Jeannet,
    There is nothing in the registration screen which should prevent you from entering any valid email ID unless and untill you are mentioning the same ID in both the "E-mail" and "Confirm E-mail" field. Could you please confirm that?

Maybe you are looking for