Hp office jet pro 8600 won't scan

Wirelessly connected office jet pro 8600 won't scan in windows. I've checked to make sure proper services are running and they are. Started running diagnostics utility and the driver didn't check out but I have the correct one installed and the printer works just fine. Occasionally a message pops up and says that the computer has lost connection with the scanner. Any help would be much appreciated. Thanks.

Hi GradyIV,
I can help you scan from your Officejet 8600 to your Windows operating system. It sounds like you have run the HP Print and Scan Doctor, is this whee you say the driver error?
I suggest using the following steps to delete the printer from device and printers, and the driver from the server properties.
1. In the ‘Devices and Printers’ folder
2. Choose ‘Print server properties’.
Win XP – With no printer selected, click ‘File’ then ‘Server Properties’.
Windows Vista – With no printer selected, press ‘Alt’ then click ‘File’ then ‘Server Properties’.
Windows 7/8 and 8.1 – Select any printer in the ‘Devices and Printers’ folder and click ‘Print Server properties’ above.
3. Click on the ‘Drivers’ tab at the top of ‘Print server properties’ window
4. Choose the printer you want to uninstall and click ‘Remove’
5. Choose 'Remove driver only'
6. The next screen will give a warning, letting you know that deleting the driver package will remove it from the system. Click ‘Yes’ to say that you are sure you want to do this.
If documents are stuck in the print spooler, you may see an error, cancel any documents pending in the print queue, or try restarting the print spooler, then try to remove the driver from ‘Print server properties’ again. If it still won’t remove the package, restarting the computer and the printer should resolve this ‘in use’ error and allow the driver to be removed.
After the driver is removed, open Start > All Programs > HP folder > Printer folder > HP Setup and Software (or the printer icon).
The Setup and software screen will open and you can click on Connect a new printer.
If the issue persists let me know and I will do what I can to help.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

My HP office jet pro 8600 won't connect to my macbook pro or my iPad

My HP Officejet pro 8600 at work will no longer connect to my macbook pro or my ipad, yet it still connects to my bosses ipad just fine. I had tried uninstalling it on my mac, and then when i try to reinstall it its not there. I have tried unplugging the printer several times and this too doesnt work. I have tried resetting up the printer on wifi and even tried restarting my wireless router nothing has worked at all i'm getting really frusterated having to take all my work on a flash drive to my bosses computer to print it off please help ASAP.
Zerr222

Hi Zerr222,
Try unplugging the router from the power for 30 seconds, plug it back in and allow it 2 minuts to fully start.
Next turn the printer off and back on and check for any difference.
If the issue remain, may you changed a wireless router lately? what is your exact router brand and model?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

My new HP Office Jet pro 8600 won't connect to my wireless Airport

I try and set up my new Office jet to my wireless and I get the message: More than one access point/wireless router has been found that matches your wireless network name. I only have one router and it is an Apple Airport Extreme. I've tried doing throught he network wizard and tried doing it through the installation on the computer with it directly connected to the computer. I called HP and was on the phone for an hour and all they could come up with was that the Airport had 5 GHz and so it will sense two routers. Huh???? What can I do? I don't want a new router since I just got that one.

If your router supports dual band broadcasting 5Ghz and 2.4 Ghz, log into your router and look at the two wireless profile names. The names (SSID) should be changed so that they are different from each other for each band 5 and 2.4. Also if the SSID is the default SSID that ships with the router, change it to a unique name as a neighbor within range may have the same SSID. Rename to "my unique SSID" and connect the printer to the new network name "my unique SSID" as example. If you need further assistance, list the exact model of your router
I was an HP employee
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

HP Office Jet Pro 8610 won't scan to imac system 10.10.1

I can get the printer to scan from my computer, but not post it on the desktop. It say the function is disabled and contact set up person or administrator. My son set it up and is not available. I will be the administrator. How do I enable the function. Hp Officejet pro 8610. I'm on a IMAC operating system 10.10.1

Hello @Annpaints,
Welcome to the HP Support Forums! I see you are unable to scan with your Mac running the Yosemite 10.10 Operating system to your HP Officejet Pro 8610, when you attempt to scan to the Mac you are given the error that it needs to be enabled. Please go ahead and start below:
Click the Finder tab, and then click Go.
Click the Utilities tab, and then click the HP Utilities icon.
Click Scan Settings, and then select the Enable Scan to Computer box.
Are you now able to Scan to the Mac? I was able to find this helpful information here: Scanning with the Full Feature HP Software in OS X v10.10 Yosemite
Please let me know the outcome.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Can't scan from Office Jet Pro 8600

I can't scan from my Office Jet Pro 8600. I'm connected to my home Verizon Fios wireless network. I'm running Windows XP. The printer works fine, but I can't scan. When I use the display on the printer I get a "No Computer Found" message. When I go to find the scanner on the Control Panel/Scanners & Cameras - I can see the printer listed, but when I click on the printer, I get a message that reads: "The scanning software could not be found, or your scanner is not connected. Please make sure your scanner & your scanner software are properly installed." So then I use the HP Print & Scan Doctor to download to "Get Installer" presumably to download the software. After the software downloads, there is no difference. I still can scan, & the network is not seeing the scanner. What gives?

Hello,
I see that an issue has popped up that pertains to NOT being able to scan.
Please click on the following link that troubleshoots A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning.
Please feel free to write back with any additional questions or concerns.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How to Scan using your HP Office Jet Pro 8600

Well, I figured out my own answer because I couldn't find a "solved" topic in this regard. So then I decided to post my findings in order to help the next querier (is that a word = one who queries). FYI - I am not a 'techie' and while I can find my way around a computer it sometimes takes a while. Also, I have Windows 7 on this laptop if that makes a difference.
1. Go to Control Panel and choose:
2. Hardware and Sound, then
3. Devices & Printers, then
4. Fax-HP Office Jet Pro 8600 (Network) or whatever printer choice pertains to your situation, then
5. HP Printer Assistant, then
6. Scanner Actions, then
7. Scan a document or photo, then
8. Save as PDF
9. Scan
10. Save to folder you choose
I know this may seem simplistic to most of you but maybe someone like me is out there trying to find this out and this might help.
Roxi
This question was solved.
View Solution.

Hi Acupuncture,
Thank you very much for posting your solution that you found yourself, on using the scan function on your HP OfficeJet Pro 8600. I also apologize we were not fast enough to answer one of your inquiries on the HP Support Forums. I was able to check your user page but was unable to find your initial post on asking us How to Scan, did you delete the question? Either way I am glad you are now up and scanning from your OJ 8600.
For future reference I would like you to take a look here: How to Scan: Windows 7, here you will be given all options and shortcuts on scanning with or without the HP software as well as some cool features, like scanning from the front panel of your 8600 and adding multiple pages to a single file.
Again I appreciate you taking the time to help the other Community members, so Thank you again!!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How scan from HP Office Jet Pro 8600 to iPhoto?

How scan from HP Office Jet Pro 8600 to iPhoto on iMAC?

Hello AlisoCreek,
Thank you for using Apple Support Communities.
For more information, take a look at:
Mac Basics: Using a scanner
http://support.apple.com/kb/ht4505
Have a nice day,
Mario

HP Office Jet Pro 8600 Plus 910 n printer driver does not install on a windows server 2008R2 OS

I recently had a new server installed, a Proliant with a Windows Server 2008R2 operating system. I now just discovered that my All in One Office Jet Pro 8600 Plus A 910 will not install on the Windows Server 2008 R2, ïncompatible operating system. Does anybody have a workaround or solution?

Hello dawnp,
Welcome to the HP Forums.
I see that you are having an issue with installing the printer on to your Windows 7 computer.
I suggest that we start off by running the HP Print and Scan Doctor. If the Doctor fails, please let me know where it failed as well as any error codes you may see.
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Wireless printing issue. Lonovo Think Pad v. Office jet pro 8600

I went through all 7 of the trouble shooting steps but still can't get my wireless printing to work with my Lonovo laptop T430 and my HP office jet Pro 8600 ..last resort was to join the forum so here I am. all connections appear to be on line and as they should be until I try to print a document. The print window tells me printer is offline but the printer network test tells me it passed all tests and is connected and ready. Using windows 7 operating system.

llbbsis, if everything passes my initial concern is that you might not be connected to the same network on your printer as your computer is connected to. So the first thing i would check is being sure that the SSID on both is the same and not something like "NetworkName" and "NetworkName -Guest."
Next, have you used the Print and Scan Doctor from HP? It is a good tool to diagnose and treat some of the smaller issues with printing:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03286146
Check those two things first and get back with me, if you need further help I am more than willing to do whatever I can to get the issue at hand taken care of.
Have a great day!

HP Office Jet Pro 8600 all in one

I fax documents from word with my printer. Every once in a while, but more frequently as of late, the document will fax, shows send in the log, I hear the the fax completely send and hang up, but then it will fax it over and over, even though I only set it to fax one time. Only way then to stop it from sending is to turn off printer and then I either have to reboot my computer or log off to get it to clear. When computer comes back up, I turn printer back on and it is ready for use. It has done this since I bought it, but like I said seems more frequent.
It is an HP office jet pro 8600 all in one, running on Windows 8.1. It is hard wired, not running wirelesslym with desktop. Anybody have any clues as to what is causing this and how to fix it. It is so frustrating. Thanks.

Hi LFoskey,
Does the printer send multiple faxes when you fax directly from the printer, or only when you fax from Word?
You can check for a firmware update in cause the issue is being caused by the printer itself;
HP Officejet Pro 8600 N911a Firmware
HP Officejet Pro 8600 N911g_n Firmware (Plus and Premium models)
Please also try the HP Print and Scan Doctor, it can quickly resolve any issues including but not limited to;
Driver Check : Checks for missing or corrupt driver files.
Device Manager : Checks for problems in Device Manager that would prevent printing.
Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match : Checks the port settings for the HP product.
Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
Click here to download and run the Print and Scan Doctor> www.hp.com/go/tools
Please post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
If you see only green check marks ( ), the tool did not find any problems.
If you see green wrenches ( ), the utility identified an issue and corrected it automatically.
If you see yellow exclamation points ( ), the test failed and required user action, but the step was skipped.
If you see a red X ( ), follow the on-screen instructions to resolve the issue.
I look forward to hearing from you. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Office Jet Pro 8600 hp cannot connect wirelessly to WPA2 Enterprise encrypted network

HP Office Jet Pro 8600 Premium all in one Printer Scanner CAN NOT connect to encrypted wireless network? Specifics: Wireless network uses WPA 2 Enterprise encryption without passphrase. ( mac filtering only ) Mac address of device is already entered into the wireless router list of devices allowed to connect. Wireless wizard reports ....unable to connect due to authentication failure. alternative instalation attempts ask for passphrase which the wireless network does not use at all. Has been a big issue preventing deployment of mobile wireless scanning and printing throughout the facility. WPA2 is clearly listed as supported wireless protocol. Please help. Several weeks of struggle with India did not resolve the issue. Thank You.

If your router supports dual band broadcasting 5Ghz and 2.4 Ghz, log into your router and look at the two wireless profile names. The names (SSID) should be changed so that they are different from each other for each band 5 and 2.4. Also if the SSID is the default SSID that ships with the router, change it to a unique name as a neighbor within range may have the same SSID. Rename to "my unique SSID" and connect the printer to the new network name "my unique SSID" as example. If you need further assistance, list the exact model of your router
I was an HP employee
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Mac to Office Jet Pro 8600 printer

I have a IMAC desk top connected to an Office Jet Pro 8600 running MAC OS 10.6.8. I cannot get the scanner to scan photo's to a specific size. I use the HP Utility but no matter what I try to do the scanned image only cooies from the front right corner of the scanner glass. How do I change the JPEG scanner size and how do I scan whatever size image I place on the glass?
This question was solved.
View Solution.

Hi @paul8588,
Welcome to the HP Forums!
I noticed that you are trying to scan photos to a specific size with your HP Officejet 8600, and I am happy to help!
I would recommend the following:
Reset the printing system. Mac OS X: How to reset the printing system.
Verify and repair disk permissions. Disk Utility 12.x: Repair disk permissions.
What size of paper are you trying to scan on the glass?
If the above recommendations do not solve your issue, please see this guide. How to Scan: Mac OS X v10.6, and you will see some alternate scanning options without HP software.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Office Jet Pro 8600 - need to replace white plastic ADF strip

Documents scanned on Office jet Pro 8600 have a pale streak down the right third of the page that correlates with a notch in the white plastic ADF strip. There appears to be something broken from the strip at that point. Is this strip replaceable and is so, how does one acquire one?
Thanks,
Stryder98

Hello Stryder98,
Welcome to the HP Forums!
I understand you need to replace the white plastic ADF strip using the Officejet 8600. I would recommend contacting HP technical support for further assistance. Click here to find out: HP Worldwide Contact.
Good luck.
I worked on behalf of HP.

Why can't i use my mac book air with my new HP Office Jet Pro 8600

trying to link up my mac book air with my new HP Office Jet Pro 8600 with a direct usb cable
my computer tries to download the software necessary and then says its not available at this time and to try again later, but I've tried a few times now since monday and its no different
i desperately need to print sign scan and email a document asap!
please help!

Somewhere in the printer's documentation, presumably.
HP's model designations can be incomprehensible. Try this page:
http://h10025.www1.hp.com/ewfrf/wc/pfinder?&cc=us&lc=en&dlc=en&tmp_qt=driver&tmp _searchExperience=0&tmp_product=hp+officejet+pro+8600&product=

Office jet Pro 8600, Multiple Printers on same nenwork need to change printer name ID

How do I Change the default Printer ID /name on a Office Jet Pro 8600 AI1 using OS x 10.8 on a home network . To prevent other computers from accessing multiple 8600's set as delivered, on the same network?

Hi @JimAckroyd
It took me sometime, but I think I found exactly what you are looking for! Please take a look at the instructions already written out by ShlomiL; Re: Changing the name of a printer in my LAN.
I hope this resolves your inquiry.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Hp office jet pro 8600 won't scan

Similar Messages

Maybe you are looking for