HP Officejet 4500 G510g windows 7 64 bit impossible to download working driver from HP

Hi
I am connecting to an HP officejet 4500 with no installation discs.   I have been trying to download driver from HP .  All the installations just advise tht it has stopped working.  I have downloaded the correct drivers from HP website using Chrome and IE but same issues.   It would appear that HP just do not have any "working drivers" available for this printer.   
I am aware that I need to not have the usb cable attached when installing the driver.  I have now tried installing same driver so many times now maybe I need to uninstal the previous driver instal attempts.
Either way, the HP printer ran out of warrenty Nov 2011 so I cannot chat direct to HP but guess could call them at a cost but just to get a working driver this should not be necessary.
The Product code of the printer appears to be CB867A.
Any advice much appreciated as otherwise it will have to go in the bin and never HP again.
Cheers
This question was solved.
View Solution.

Hi John,
First of all, click the start button and type %temp% within the search box.
Open the listed Temp folder.
Remove any of this folder's contrent by clicking CTRL + A and then the Delete key.
Any of this contect is a temporary content and can be deleted with no issues.
Next run the OJ4500vG510g_m_Full_13-en.exe once again.
Once the error appears again, run the patch as you listed on your previous post once again.
If it still points to the A-F folder, open the newly created HP folder within the same Temp folder, copy its path and paste it into the patch once it shows the installation path and check for any change.
Please let me know if that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • I have a seagate external hard drive with files copied from windows pc. If I will download NTFS driver from seagate to my mac, could I install it safely without harming my files in the external hard drive? I am afraid I may erase all files in there.

    I have a seagate external hard drive with files transferred from my windows pc. If I will download NTFS Driver from seagate to my mac, could I install it safely without harming my files? I am afraid.. I might erase all my important files during the installation..

    Thanks a lot! I have already downloaded Paragon Driver and it works well with seagate external hard drive. I am copying as of now my important files from my mac to it. However, I have only the trial version which will expire in 10 days. I don't have credit card to buy for it.

  • Officejet 4500 G510g-m | Windows 7 Driver Installation Problems

    Hello!
    I've just purchased a new Acer Aspire One 722 laptop running on Windows 7 64-bit for work and I'm having some problems getting it to play nice with the all-in-one at work. The model is an Officejet 4500 G510g-m and though I still have the CD, it seems to be of little help. Whenever I run any of the HP diagnostic tools, they attempt to download the full software suite (I assume, since it's the same 373MB package) and extract it, only to go back to step one of discovering the device and starting the download all over again.
    I have tried running the Solution Center installer directly from the disk, at which point I get the 2732 error. I've uninstalled and reinstalled Flash to attempt to circumvent that error to no success. I have downloaded both the basic and the full driver suite from the HP site and attempted installation multiple times, using the scrubber in between to ensure a clean slate. I've copied the files from the CD to my computer and tried to install more directly, with exactly the same results, yet the printer continues to show up as problematic under the "Printers and Devices" window, troubleshooting which just returns me to the endless cycle of downloading a driver that seems to not want to install.
    At this point, I haven't the faintest clue what's causing the problem, so I'd greatly appreciate any insights!
    Thanks for your time in advance.

    Hey Kyramor,
    If you visit this link you can find the print and scan driver without the full feature software:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=3919449&
    This installation via this method.
    Hope this helps!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • Officejet 4500 g510g-m won't print

    Officejet 4500 G510g-m; Windows 7 Pro 64bit; USB Connection; Unit worked great on my old computers running XP Pro 32bit;  Bought new desktop and laptop-now same problem on both computers;   I hope Shlomil is available.  I am having the same problem outlined by zax5 on 2-14-14.  I've downloaded and installed the full version software from hp, connecting the printer when instructed, but when I attempt to print, the printer indexes the blank sheet to the middle of the page (not the top??) and stops.  The que initially shows the print job but after the paper indexes, the que says the jobs complete, but nothing printed and the page never indexes out of the printer.  I am able to see ink levels. Fax works, don't know about scan yet.  There is a patch referenced in the other post:
    http://h10025.www1.hp.com/ewfrf/wc/document?product=3919449&lc=en&cc=us&docname=c03030583
    but when I click on it I get an Error 404, Page not Found.  I emptied the temp file, but it didn't help.  Any ideas?

    OK since my first message I've tried running the print & scan doctor, and hp printer diagnostic tool,  following all instructions, cycling power on the printer, uninstalling, deleting temp file entries, doing selective startup, reinstalling, updating, everything I can think of, still to no avail.  Upon completion of install, message says install completed successfully but when I try to print anything, the printer indexes the paper to the middle of the page (not the top??) and stops.  Que says job pending until paper index, then indicates job complete, but nothing ever prints and the display on the unit continues to say "Printing".  Does anyone have any suggestions?  I'm at my end and thinking maybe its just time to buy a non-HP product to avoid the issue.

  • I can't seem to use the wireless connection to connect from my macpro to hp officejet 4500 g510g-m

    Hi, I don't know how to connect my hp officejet 4500 g510g-m to my mac book pro. can anyone help me? i can't seem to find the ip address for the printer. this can be connected wireless right? it wasn't connected to the modem. it is okay?
    Thanks in advance.

    Hi,
    The Officejet 4500 support ethernet connection only, using wired network connection.
    Only the 4500 Wireless model provide wireless connectivity.
    Please make sure to connect the printer to your router, then it should become available from the Mac.
    For any further issue, please clarify what router you are using.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I can not set up my officejet 4500 with windows 8

    I NEED HELP
    I can not set up my officejet 4500 with windows 8 
    I put disk in but no good

    You  can get the software from your printer's website:
    Start at
    HP 4500 officejet
    Select your exact model, put in your Operating System...
    You are looking for the Product Installation Software -- the Full Feature Software for your OS
    Download the package, it may be large..
    Then install it... Reboot your computer after the installation.
    That may do it!
    Good Luck!
    Kind Regards,
    Dragon-Fur

  • Able to send fax, but cannot receive fax... I have a HP Officejet 4500 G510g-m fax

    Officejet 4500 G510g-m (fax)... I am able to send faxes out without a hitch, but cannot receive... When someone is trying to send me a fax, the machine rings and I can view the fax number but nothing comes thru ... I also made sure that "my device" had the correct device checked... any suggestions

    Hello @Gibbs715, 
    Welcome to the HP forums.
    I  understand that you are having a problem receiving faxes.
    I would like to help.
    Double check that the 'Auto Answer' is turned on.
    Press the Setup button () on the control panel of the product.
    Press the Right Arrow button () to select Fax Settings, and then press OK.
    Press the Right Arrow button () to select Answer Options, and then press OK.
    Press the Right Arrow button () to select Auto Answer, and then press OK.
    Press the Right Arrow button () to select On, and then press OK.
    Have you ran a fax diagnostic test?
    Load plain white paper into the tray.
    Press the Setup button ().
    Press the Right Arrow () to select Tools, and then press the OK button.
    Press the Right Arrow () to select Run Fax Test, and then press the OK button. The product displays the status of the test and prints a report.
    Also, if there is a voicemail service on your phone line, it could be intercepting the fax and preventing the 4500 form receiving the fax.
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • How long does it take to download and install full feature software for Officejet 4500 g510g-m?

    I have been updating my software in hopes I can get my Officejet 4500 g510g-m to work wirelessly but the full feature software has been at the "installing software" stage for over an hour. Is this normal? Also, anyone know where I can find a step by step guide on setting up my printer for wireless use? Is it even possible?

    The download speed is dependent on many things, but is often a factor of your Internet provider's service.  If you are on basic DSL, then over an hour is not out of line.  If you are on cable, something is wrong.
    Try this for a guide: www.hp.com/go/wirelessprinting
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to my TV. I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my Den.

    I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?

    I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?

  • The synchronisation of iphone 4S to windows 7/64 bit does no longer work; kalender, individual ringtones and contacts get not sychronized in both directions. I tried reset on working configuration, deinstallation of itunes - nothing worked

    The synchronisation of iphone 4S to windows 7/64 bit does no longer work; kalender, individual ringtones and contacts get not sychronized in both directions. I tried reset on working configuration, deinstallation of itunes - nothing worked - what can be done to solve?

    Couple of things to check:
    You are using Outlook 2003, 2007 or 2010
    You have selected to sync Calendars and Contacts with Outlook on the Info tab of your iTunes sync settings
    You have selected your Outlook calendar as the default claendar on your iPhone (in Settings>Mail,Contacts,Calendars>Default Calendar)
    If all that is correct and iTunes still won't sync correctly, you might have to try reinstalling Outlook.  Another option is to enable iCloud syncing with Outlook (see http://www.apple.com/icloud/setup/).  This requires Outlook 2007 or 2010.  If you decide to sync using iCloud but sure to disable contacts and calendar syncing in iTunes on the Info tab of your sync settings.  Do not try to sync with both Outlook and iCloud or you will end up with duplicates in your contacts and calendar.
    For syncing Ringtones confirm that:
    The file is really a ringtone (right-click the file in iTunes, select Get Info, on the Summary tab it should say "Kind: Ringtone".
    You have checked each of the ringtones you want to sync
    You have checked "Sync only checked songs and videos" on the Summary tab of your iTunes sync settings
    You have checked Sync Tones on the Tones tab of your iTunes sync settings

  • I am using Windows 7 64-bit on a partitioned hard drive on a MacAir.  The trackpad will only work with a click.  How do I get the full function of tap and scroll?

    I am using Windows 7, 64-bit on a partitioned hard drive on a  2012 MacAir.  The trackpad only works with clicking.  How do I get the full function of tap and scroll? (I have this on a 2011 Mac Pro with 32 bit Windows 7 and it works properly.)

    Windows Control Panel>Boot Camp Control Panel>Trackpad.

  • Windows 7 64-bit: Safari has stopped working

    Help needed! I am one of those guys that has to use a Windows machine at Work. So I have a Windows 7 64-bit OS on my work laptop. I use Safari at home on my Macs. Since I have a browser choice, I surely want to use Safari 5 on my Windows 7 machine but so far I am having no luck. Safari runs for X minute (time varies) and then all of sudden crashes with a message "Safari has stopped working." I have uninstalled Safari, manually cleaned up all the Safari folders that go into user account preferences, ran a registry cleaner via WinUtilities so that all traces of Safari are gone. Then did a fresh install with Administrator privileges (I even tried the install with my own login ID) but either way the result is the same -- Safari 5 crashes at random. What can I do to make Safari 5 on Windows 7 stable? Please advice.
    Thank you!
    TS

    Since I have a browser choice, I surely want to use Safari 5 on my Windows 7 machine but so far I am having no luck. Safari runs for X minute (time varies) and then all of sudden crashes with a message "Safari has stopped working."
    Fingers crossed, the problem reports for those errors might cast some fresh light on the source of the problem.
    Head into your Problem Reports and Solutions control panel (or the Windows 7 equivalent ... the Action Center?) and look for recent Safari problem reports. Open them up and look through. Do they all seem to be saying the same thing? If so, paste the contents of a typical problem report into a reply here so we can have a look.

  • Windows 7 64 bit is unable to locate driver for my 7 gen nano.

    Windows 7 64 bit is unable to locate driver for my 7 gen nano.

    Thanks for the tip. What I wonder though is should I do that or does the 64-bit client have a 32-bit layer that works with 32-bit applications or, am I forced to still deploy a 32-bit client because of my 32-bit software?
    Thanks

  • I have a PC running windows 7, 64 bit operating system which we upgraded from windows XP 32 bit. I can't download my photoshop elements which I bought as a download onto this 64 bit because it says it's for a 32 bit system

    I have a PC running windows 7, 64 bit operating system which we upgraded from windows XP 32 bit. I can't download my photoshop elements which I bought as a download onto this 64 bit because it says it's for a 32 bit system

    Hi claire.winteringham,
    If you have a 64 bit machine then there shouldn't be any problem while installing any 32-bit software.
    Try to download it with the below mentioned link :
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=en
    Thanks,
    Atul saini

  • I need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help

    i need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help if any one has the drivers or knows were i can download them

    Doug...
    If you don't have it for reference, the manual might come in handy > US/Boot_Camp_Install-Setup.pdf
    After it loads, Command + F to find information regarding the drivers.

Maybe you are looking for

  • CUPC 8.6.3 login failed

    I am running these versions of CUCM 8.6.2.10000-30, CUP 8.6.4.12900-2 and using CUPC 8.6.3.20802. Fully AD integration and AD authentication. All userids and passwords are operational. I keep getting login failed when I try to loginto Cisco Unified P

  • Problems Opening AIM

    Hey Folks, I am having a bit of a problem.. I installed Tiger about a month and a half ago, and since then, have had a few problems .. One of the biggest problems is programs not opening.. Today I went to open up AIM and as soon as it gets to signing

  • Load external PDF JobOptions

    Hi All, Is it Possible to load pdf export presets? Trying Script: var mypdfExportPresets = app.pdfExportPresets.everyItem().getElements(); alert("mypdfExportPresets: " + mypdfExportPresets.length); for(i=0; i<mypdfExportPresets.length; i++)     var m

  • Runtime analysis for an RFC function Module

    Hi, How to get an Runtime analysis for an RFC function Module? I have an RFC function Module I am using it for a WEB INTERFACE . For this function Module I need to get Runtime Analysis. Please do not duplicate or cross post Edited by: Rob Burbank on

  • Wiki Server 3: What is API URL for AtomPub/MetaWeblog?

    Previously (OS X Server 10.6), AtomPub/MetaWeblog editors could connect to Wiki Server using the API access point http://example.com/RPC2 (Command Line, Ecto/Marsedit) Now (OS X Server 10.7), attempts to hit /RPC2 are resulting in a 404 response. I'v