Hp officejet 4500 prints but does not appear in devices and printers in Windows 7
My wireless hp officejet 4500g prints fine wirelessly but it does not appear in Control Panel Devices and Printers in Windows 7. Do I have to go through all that uninstall and reinstall. I've used Window 7 Troubleshooting Printer check and all was fine.. Thanks for any help
Hi,
If the printer successfully print, it do exists within Devices and Printers..
Windows 7 may merge several devices into a single icon, right clicking a merged icon will let you then choose the specific device as you may see in the following screenshot as a sample:
Check any existing printer icon and locate the one your printer combined with..
If none of the printers does not list the 4500 printer make sure to right click the Computer icon within the Devices category, I notiice the printer sometimes merged within the computer as well, then you will see any printer options (e.g. Printer Properties, Printing Preferences within the computer menu.
Hope that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution
Similar Messages
-
Epson r800 prints, but does not appear in Printer List: can't use Utilities
My Epson r800 prints, but does not appear in Printer List. It is connected via USB to the iMac. A Brother LH-2070N is connected via AirPort Extreme. I need to use Utilities to clean the head of cartridge, check levels, etc.. Is there a way to fix this problem?
iMac Mac OS X (10.4.9)For your Epson try this:
Hard Drive, Library, Printers (folder), Epson folder,
Inkjetprinter folder, Utilities folder and here you
will find Epson Printer Utility2. Click on it and it
should work.
Note. Epson utilities will not work unless the
Printer is directly connected to the computer.
Had the same issue with my 2200 photo and the above
worked.
Tried again after reinstalling the drivers. There is no separate Inkjet Folder, but the Printer Utility is within the Epson folder. Unfortunately, the r800 still does not appear in the Printer List, hence no utility. -
using sucessfully airport express for internet
when hooking up new airport extreme light glows green, but does NOT appear in devices sesn in 5.6 airport wifi devices
wanting to use extreme at base and express in another part of the houseHow is the express getting internet? What modem is it plugged into?
How is the extreme setup? New extreme cannot be setup with 5.6 utility.. you must use latest 6.3. Which also means you cannot setup from computer using less than Lion .. or you must use iOS with latest utility but it has limited configuration cf the computer version.
IPv6 is also needed.. turn on local link. -
Hello, dear Colleagues.
User with administrators rights cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2.
If to launch "Devices and Printers" on server, all printer properties on "Advanced" tab are inactive (see screen below).
But I can change it manually with "Print Management". Features become active.
The main purpose - to uncheck "Enable advanced printing features" with powershell
scripts.
$erroractionpreference = "continue"
$colPrinters = Get-Wmiobject -Class win32_printer -computername print_server -Filter "Name like 'printer1' or Name like 'printer2' or Name like 'printer3' or Name like 'printer4' or Name like 'printer5' or Name like 'printer6'" # get printers on server and filter with names
ForEach ($objPrinter in $colPrinters) { # get printer details from WMI
If ($objPrinter.RawOnly -ne "True") { # check that Advanced printing fetaures is turned on
Write-host $objPrinter.Name
Write-Host $objPrinter.RawOnly
$objPrinter.RawOnly = "True" # Untick and update the object in WMI
$objPrinter.Put()
It works on Windows 7 workstation, but does not on print server Windows Server 2012 R2 with error
Exception calling "Put" with "0" argument(s): "Generic failure "
At \\print_server\c$\DisableAdvancedPrintingFeatures.ps1:8 char:17
+ $objPrinter.Put()
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DotNetMethodException
Can you help me with that? Look like somethings with rights.
Thank you.Hello, Alan
Morris.
Thanks for your reply.
I've tried to runs PS Script both locally and remotely, previously running Powershell ISE as Administrator.
I've noticed interesting thing - if to
check "Enable advanced printing features"
manually thru Print Management snap-in, script works fine. But, time to time after some manipulations on print server, this advanced feature returns to enabled state automatically by system, I think. In this case PS Script does not work. Next, if to disable
feature manually again (thru Print Management snap-in),
and enable manually again, PS Script will work. Very strange situation.
Thanks. -
Apple TV does not appear in preferences and therefore I cannot sync. Help!!
Apple TV does not appear in devices and does not appear in preferences. I can access my music libary between ATV and Itunes.
What am I doing wrong? I will have no hair left shortly!!!Welcome to the Apple Community.
The Apple TV 2 shouldn't appear in devices or in preferences and you cannot sync content to the Apple TV 2, all those things relate to the Apple TV 1 only. -
Can't print from safari to hp 4620 appears to print but does not first time i have attempted to print from safari , notes print fine no problems. It is like on a desktop my print is sitting in the queue there are error messages only the usual print dialogue. I've turned the printer off and back on with no luck any suggestions?
That's very strange. See if clearing the cache in Safari will make it work. I'll include the steps below. If that doesn't help, install a different browser, such as Opera, to see if that will print from pages that Safari won't. If it will, then something is wrong with Safari. If it doesn't print, then the web pages might have printing blocked. There are sites that are doing that for copyright reasons. Let me know what you find.
To clear the cache on Safari:
Open Settings.
Select Safari
Touch Clear Cache.
Select Clear.
Touch Clear Cookies.
Select Clear.
Touch Clear History.
Select Clear.
I am a printer tech for HP. -
LR 4 - image does not appear in Preview and will not print`
The selected image appears on the main/center panel but not in the preview screen. Printing results in a white sheet of paper with no image at all. The image has been updated to LR 4 - but made no difference. I've served help and the forums (where i saw mention of similar problems, but no comments or guidance on the problem). What am I doing wrong?
The problem began with the installation of LR4. I print directly from LR4 to my HPZ3100. I routinely select "print preview" in the print dialogue box. Now the first print I see the preview and then it prints. If I select a second print job and use the "print preview" the print preview screen comes up blank and never loads. If I try to delete the print job, it just never responds (resolves) so I have to turn off the computer and the printer and restart to clear the print job. if I don't use the print preview, it prints just fine (except that I'm not able to check what's about to be printed). Thanks for any thoughts you have on this.
Date: Tue, 10 Jul 2012 16:01:47 -0600
From: [email protected]
To: [email protected]
Subject: LR 4 - image does not appear in Preview and will not print`
Re: LR 4 - image does not appear in Preview and will not print`
created by Brett N in Photoshop Lightroom - View the full discussion
Bill, if this is only happening some of the time, then we are probably looking at a resource issue. Any pattern in when things won't print? e.g. Certain file type won't but others will? Or is it more of a timing/order thing? e.g. First file prints fine, second does not? VStromee, do no files print for you? Or is it like Bill and sometimes the print and other times they do not? Did you install any new software recently or have any updates to the OS or any application that has printing capabilities?
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4549692#4549692
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4549692#4549692. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
My ipod works in itunes but does not appear in "my computer" after I changed the properties
My ipod works in itunes but does not appear in "my computer" after I changed the properties.
First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
Any help would be very much appreciated. Thanks.Hi,
To show up in Windows Explorer, you can try placing the iPod into
disk mode.
Moreover, i recommend you to
restore ipod to factory settings.
If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
Here is an article you can refer to below:
http://support.apple.com/kb/TS1369
To get more help, you can also redirect to apple support forum:
http://www.apple.com/support/ipod/
Thanks!
Andy Altmann
TechNet Community Support -
Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
Documents say
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
But I can't see my iPad Mini in iTunes.
And my Ipad (Settings, General, iTunes Wifi Sinc) shows a message :" Sync will resume when xxx(my PC with iTunes) is available "...
Both are in the same network,
Ipad mini is is plugged in to power
. iTunes is open on the computer
what can i Do ???Hi Skydiver119, and tks for four interest.
I have done exactly as you say, but it does not work for me.
You indicated " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
I disconnect the wire,
and my iPad disappears from my iTunes screen.
in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
So, I can not sync via wi-fi
I appreciate if you can help me. -
I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.
not recognized by anything: http://support.apple.com/kb/TS1369
recognized by windows, but not itunes: http://support.apple.com/kb/TS1363
solving the problem if the above does not work:http://www.instructables.com/id/What-to-do-when-iTunes-does-not-recognize-your-i Po/step1
(make sure you go to the next slides. -
I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign. How can I fix this problem?
Start by rebooting the computer. If that doesn't work, search for adobefnt*.lst and delete all instances where * becomes a 2-digit number.
-
Applet compiles but does not appear...
the applet compiles but does not appear :(
all that appears is a blank box...hopefully someone can help
import java.awt.*;
import java.applet.*;
import java.awt.event.*;
public class program2 extends Applet implements ActionListener
private Button btLeft, btRight, btUp, btDown, btBgYellow,
btBgRed, btBgBlue, btBgOrange, btTxtRed,btTxtYellow, btTxtBlue,
btTxtOrange, btFtHel, btFtCr, btFtTr, btFtSy;
private MessagePanel messagePanel;
private Panel p = new Panel();
public void init()
p.setLayout(new BorderLayout());
messagePanel = new MessagePanel("Java is Life");
messagePanel.setBackground(Color.white);
//directional buttons
Panel pButtons = new Panel();
pButtons.setLayout(new FlowLayout());
pButtons.add(btLeft = new Button());
pButtons.add(btRight = new Button());
pButtons.add(btUp = new Button());
pButtons.add(btDown = new Button());
//Background buttons
Panel BgButtons = new Panel();
BgButtons.setLayout(new FlowLayout());
BgButtons.add(btBgRed = new Button());
btBgRed.setBackground(Color.red);
BgButtons.add(btBgYellow = new Button());
btBgYellow.setBackground(Color.yellow);
BgButtons.add(btBgBlue = new Button());
btBgBlue.setBackground(Color.blue);
BgButtons.add(btBgOrange = new Button());
btBgOrange.setBackground(Color.orange);
//text color buttons
Panel txtButtons = new Panel();
txtButtons.setLayout(new GridLayout(4,1));
txtButtons.add(btTxtRed = new Button());
btTxtRed.setBackground(Color.red);
txtButtons.add(btTxtYellow = new Button());
btTxtYellow.setBackground(Color.yellow);
txtButtons.add(btTxtBlue = new Button());
btTxtBlue.setBackground(Color.blue);
txtButtons.add(btTxtOrange = new Button());
btTxtOrange.setBackground(Color.orange);
//font buttons
Panel ftButtons = new Panel();
ftButtons.setLayout(new GridLayout(4,1));
ftButtons.add(btFtHel = new Button());
ftButtons.add(btFtCr = new Button());
ftButtons.add(btFtTr = new Button());
ftButtons.add(btFtSy = new Button());
//layout
p.add(messagePanel, BorderLayout.CENTER);//set center 1st
p.add(pButtons, BorderLayout.SOUTH);
p.add(BgButtons, BorderLayout.NORTH);
p.add(txtButtons, BorderLayout.EAST);
p.add(ftButtons, BorderLayout.WEST);
//listeners
btLeft.addActionListener(this);
btRight.addActionListener(this);
btUp.addActionListener(this);
btDown.addActionListener(this);
btBgRed.addActionListener(this);
btBgYellow.addActionListener(this);
btBgBlue.addActionListener(this);
btBgOrange.addActionListener(this);
btTxtRed.addActionListener(this);
btTxtYellow.addActionListener(this);
btTxtBlue.addActionListener(this);
btTxtOrange.addActionListener(this);
btFtHel.addActionListener(this);
btFtCr.addActionListener(this);
btFtTr.addActionListener(this);
btFtSy.addActionListener(this);
//implement listener
public void actionPerformed(ActionEvent e)
if(e.getSource() == btLeft)
left();
else if(e.getSource() == btRight)
right();
else if(e.getSource() == btUp)
up();
else if(e.getSource() == btDown)
down();
else if(e.getSource() == btBgRed)
red();
else if(e.getSource() == btBgYellow)
yellow();
else if(e.getSource() == btBgBlue)
blue();
else if(e.getSource() == btBgOrange)
orange();
else if(e.getSource() == btTxtRed)
redText();
else if(e.getSource() == btTxtYellow)
yellowText();
else if(e.getSource() == btTxtBlue)
blueText();
else if(e.getSource() == btTxtOrange)
orangeText();
else if(e.getSource() == btFtHel)
helvetica();
else if(e.getSource() == btFtCr)
courier();
else if(e.getSource() == btFtTr)
times();
else if(e.getSource() == btFtSy)
symbol();
//directional methods :0)
private void left()
int x = messagePanel.getXCoordinate();
if(x > 10)
messagePanel.setXCoordinate(x - 10);
messagePanel.repaint();
private void right()
int x = messagePanel.getXCoordinate();
if(x < (getSize().width - 5))
messagePanel.setXCoordinate(x + 5);
messagePanel.repaint();
private void up()
int y = messagePanel.getYCoordinate();
if(y < (getSize().height - 10))
messagePanel.setYCoordinate(y - 10);
messagePanel.repaint();
private void down()
int y = messagePanel.getYCoordinate();
if(y < (getSize().height + 10))
messagePanel.setYCoordinate(y + 10);
messagePanel.repaint();
//background methods :)
private void red()
messagePanel.setBackground(Color.red);
private void yellow()
messagePanel.setBackground(Color.yellow);
private void blue()
messagePanel.setBackground(Color.blue);
private void orange()
messagePanel.setBackground(Color.orange);
//text color methods :)
private void redText()
messagePanel.setForeground(Color.red);
private void yellowText()
messagePanel.setForeground(Color.yellow);
private void blueText()
messagePanel.setForeground(Color.blue);
private void orangeText()
messagePanel.setForeground(Color.orange);
private void helvetica()
Font myfont = new Font("Helvetica", Font.PLAIN,12);
messagePanel.setFont(myfont);
private void courier()
Font myfont = new Font("Courier", Font.PLAIN,12);
messagePanel.setFont(myfont);
private void times()
Font myfont = new Font("TimesRoman", Font.PLAIN,12);
messagePanel.setFont(myfont);
private void symbol()
Font myfont = new Font("Symbol", Font.PLAIN,12);
messagePanel.setFont(myfont);You add everything to the Panel p but you never add that panel to the applet. What you probably want is to add everything to the applet. An applet is a special kind of panel so you can just change "p" to "this" everywhere in init and remove the declaration of p at the top.
-
Field on manual tabular appears using Firefox but does not appear using IE
Hello,
A field in a manual tabular form appears correctly using Firefox but does not appear or appears in another field when IE is used. Javascript is used to hide certain columns on the tabular form. Does anyone know how to solve this problem?
Thanks panyPrabodh,
The select for the report and the javascript that is used to hide the columns are displayed below. The data for Apex_item.select_list_from_lov(12,null,'LOV_METHOD_OF_ACQ') is shown in the previous column, Date Acquired, and the column for Method Acquired is blank. It appears correctly in Firefox. Please let me know if this is sufficient.
Thanks,
pany
SELECT
apex_item.hidden(1, c011) status
,apex_item.checkbox(2,seq_id) checkbox
,apex_item.hidden(3, seq_id) seq_id
,apex_item.hidden(4,c001) Owner_Firm_Id
,apex_item.hidden(5,c002) Owner_Id
,apex_item.hidden(6,c003,10) First_Name
,apex_item.hidden(7,c004,10) Last_Name
,apex_item.text(8,c005,10) Number_Shares
,apex_item.text(9,c006,10) Percentage
,apex_item.text(10,c007,10) Class
,apex_item.date_popup(11,rownum, c008, 'MM/DD/YYYY',15) Date_Acquired
,apex_item.select_list_from_lov(12,c009,'LOV_METHOD_OF_ACQ') Method_Acquired
,apex_item.hidden(13,c010,10) Primary_Key
FROM apex_collections
WHERE collection_name= 'INTEREST_STOCK_COLL'
AND c011 IN ('O','N','U')
union all
select
apex_item.hidden (1,null) status
,apex_item.checkbox(2, null) checkbox
,apex_item.hidden(3, null) seqid
,apex_item.hidden(4,null,10) Owner_Firm_Id
,apex_item.hidden(5,null,10) Owner_Id
,apex_item.hidden(6,null,10) First_Name
,apex_item.hidden(7,null,10) Last_Name
,apex_item.text(8,null,10) Number_Shares
,apex_item.text(9,null,10) Percentage
,apex_item.text(10,null,10) Class
,apex_item.date_popup(11,1, null,'MM/DD/YYYY',15) Date_Acquired
,apex_item.select_list_from_lov(12,null,'LOV_METHOD_OF_ACQ') Method_Acquired
,apex_item.hidden(13,null,10) Primary_Key
FROM dual
Javascript
function hideCols(p_startOfTable, p_pageList, p_debug)
alert("in function");
var outStr = "Blanking Script:\n";
var debug = p_debug;
var offCols = p_pageList.split(":"); //string comes in colon delimited, split it
into array
var tbl = document.getElementById(p_startOfTable); //get the table from the page
html source
var rows = tbl.getElementsByTagName('tr'); //get the first row
var tds = tbl.getElementsByTagName('td');
var testStr;
outStr = outStr + "START tds length is " + tds.length + "\n";
if (debug)
alert(outStr);
//START Clear Headers
var i, j, cells;
cells = rows[0].getElementsByTagName('th'); //get the headers
for (j = 0; j < offCols.length; j++)
cells[j].className = "hidden";
outStr = outStr + "i is " + i + " HEADER rows.length is " + rows.length +
"\n";
if (debug)
alert(outStr);
//END Clear Headers
//START Clear TDs
for (i = 0; i < tds.length; i++)
var attrib = tds.innerHTML;
var gNum = attrib.indexOf(" name=") + 7;
var colNum = attrib.substr(gNum, 2);
colNum = parseFloat(colNum);
for (j = 0; j < offCols.length; j++)
if (debug)
testStr = testStr + "\n" + "colNum is: " + colNum + " className is: " +
tds[i].className + " i is: " + i + " j is: " + j + "\n";
if (colNum == offCols[j])
if (debug)
alert("colNum is " + colNum);
if (tds[i].className == "datepicker")
if (debug)
alert("caught condition with i= " + i);
tds[i - 1].className = "hidden";
tds[i].className = "hidden";
tds[i + 1].className = "hidden";
//add popupLOV functionality here
//add radio button functionality here
// add other items that may have multiple <td>
else
//regular hideCol
tds[i].className = "hidden";
//END Clear TDs
if (debug)
alert(testStr);
//document.write(testStr);
Edited by: PANY on Aug 12, 2010 8:25 AM -
Reader XI (11.0.09) sometimes starts process but does not appear in applications or open on desktop
On windows 7 64-bit. Reader XI (11.0.09) sometimes starts the process but does not appear in the applications. This happens however the application is started i.e. start menu, double click pdf, double click AcroRd32.exe. It
11.0.09 is hanging for us - backing out to 11.0.08 fixes the issue
-
IF YOU HELP MY NANO upgraded when you install PERFECT BUT DOES NOT APPEAR ON THE SCREEN NOTHING BUT as if you were OFF if turned PLEASE HELP OR MORE AND HAS THE NEW UPDATE
iPod not recognized in 'My Computer' and in iTunes for Windows
Maybe you are looking for
-
Running quicken on parallels vs boot camp
I am having to reinstall all of my programs as my hard drive failed. I'm curious whether to re download parallels to run my quicken for windows or should I use boot camp and instal there? I don't really know much about boot camp. Any experience a
-
Jquery customizing dialogue box for validations messages,
Hi everyone, I create a new template label with this script: <script type="text/javascript"> $('#errdialog').find('ul').append($('<li/>',{text:'#ERROR_MESSAGE#'})); </script> I'm using this function to create a dialogue box on my apex application: Pa
-
CC sign-in troubles in Mexico? please help
I am having trouble signing in. A window pops up for a trial version of Photoshop, eventhough i am a subscription member. Then it says my clock is wrong and this is the cause of the connection error. I am online and connected to the internet. I chan
-
Hi all, I am trying to sample a 12bit input using sample clock and start sampling trigger. Here's how I configure the task: DAQmxErrChk(DAQmxCreateTask("",&samplHandle)); DAQmxErrChk(DAQmxCreateDIChan(samplHandle,"Dev1/port0/line0:7","",DAQmx_Val_Cha
-
I'm trying to update my computer but I just don't understand what is going wrong. root@Baldr werner]# pacman -Syu :: Synchronizing package databases... core is up to date extra is up to date community is up to date kdemod-core is up to date kdemod-ex