HP Officejet 4620 All in One Not Printing Black-BRAND new cartridge

Hello everyone, I am hoping SOMEONE can help me, as this has taken up hours of time and resulted in plenty of frusteration. I just replaced my black ink cartridge, and not a single drop of black ink will print. I have genuine cartridges, and cleaned the print heads, both steps one and two, atleast twice each. In the meantime I have since used up all my color ink, which is still working. But black does not show up AT ALL. Sure, I could buy more color cartridges and use them to print black, but at this point, I do not want to put any more money into this printer if it's not going to work properly. I am desperate for an solution! I run a small business from home and I NEED my printer. My warranty expired a few months ago and am really hoping I don't have to pay for phone support.
Does anyone have any advice on how to get black to print properly?? PLEASE AND THANK YOU!!!
This question was solved.
View Solution.

I suggest you call HP support regardless of warranty as described in the post here. If you are in the US call 1-800-HPINVENt, elsewhere see the contact information here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Officejet 4620 All in one Not printing even with new cartridge

My printer has suddenly stopped printing.
There are no error messages.
My ink level is full.
It slowly started "running" out of ink as I was printing.
New cartridge.
Cleaned printer heads twice.
Ran print quality report and it acted like it was printing but didn't.
Any ideas??

The document here may help resolve black not printing on your Officejet 4620. Be sure to check the vents, if they are blocked the printer will appear to be running out of ink early in the cartridge life.
If the troubleshooting steps there do not resolve the issue I sould suggest you contact HP, 1-800-HPINVENt if you are in the US or see the document here for elsewhere. They may be able to help resolve the issue even if the printer is not in warranty as described in this post.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Deskjet 3056A E-all-in-one not printing black ink properly

Hello, I've had my Deskjet 3056A E-all-in-one printer for 2 years and didn't have any problems until about 3 months ago. My black ink cartridge suddenly stopped printing properly. It started to seem like I needed to replace the ink, so I did, but that did not fix the problem. It still seems like the ink level is really, really low sometimes, but it's a brand new cartridge. I couldn't even align the printhead because the black ink wouldn't print. Then I cleaned the printhead and cleaned the ink smear. When the test papers printed after the cleanings the black ink would only print half of the line of letters or numbers, or it was just choppy and faded. I checked the ink levels and it says both of my ink cartridges are almost full still. I was thinking about replacing the cartridge again, but I don't want to waste the money if it won't fix the problem. The color cartridge works completely fine, just to clarify.

If the black cartridge is in warranty you could contact HP Phone Support
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

5610 All in One Not printing after changing both cartridges

I just changed both the color and the black cartridges on my Officejet 5610 Aii-in-one and now it won't print anything. I did the cartridge alighment and it completed it successfully as far as I can tell.

Hello @Matthew2913,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the print quality issue that you're experiencing since installing new cartridges in your HP Officejet 5610 All-in-One Printer. Thank you for including in your post that the alignment went through successfully.
At this point I would like you to run through some print quality troubleshooting steps. Can I please have you start troubleshooting by clicking here. Once the support document opens please run through step 1, step 2, step 3, and step 4. This includes any sub-steps under each of the steps listed. Please pay close attention to the 'Missing Colours' section under step 4.
Please respond to this post with the result of your troubleshooting. Best of luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

5512 all in one not printing black ink

My Photosmart 5512 isn't printing black ink. It also won't align which is odd. It doesn't "see" the alignment page when I try to scan it. I have done all the things that the HP troubleshoot site said (test pages, cleaning printheads, quality report pages, aligning printheads) and still no luck. It is also out of warranty. Any and all help would be appreciated! Thanks

Hi @CassieP
I see you are unable to print black from your Photosmart 5512, I'd like to help. Please complete all of the steps in the following document; Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages.
Although I hope this resolves the issue, it might not. If the issue persists, please post back with your warranty status. Use the following link to check your warranty.
If your printer is still in warranty, please call HP and explain the issue you are experiencing. The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
If your printer is out of warranty, let me know and I will do my best to help. Thanks. I look forward to hearing from you.
IMPORTANT: Please include your country/region in your next post. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Officejet J5750 All in One Not Printing

The printer has now stopped all together, just flashes lights. Tried the printer tool box. Printed a beautiful diagnostic page, but got the stoppage and flashing lights on the test page. Turned off and on and got a replace cartridge message. Did that. Got the allignment message. Will not allign, goes to flashing lights. Off and on will not clear it because everytime it comes back on it tries to allign and it won't.

The document here may help resolve black not printing on your Officejet 4620. Be sure to check the vents, if they are blocked the printer will appear to be running out of ink early in the cartridge life.
If the troubleshooting steps there do not resolve the issue I sould suggest you contact HP, 1-800-HPINVENt if you are in the US or see the document here for elsewhere. They may be able to help resolve the issue even if the printer is not in warranty as described in this post.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Officejet 5610 All-in-One not printing true colours

The HP help people have finally given up on trying to make my Mac see the Color Options tab in their print software with my set-up. They now say, "It's an Apple problem". If I could see these settings I'd be able to adjust the HP defaults for print-outs (by saturation, brightness, density, hue, contrast, etc) once and for all so I'd get closer to what I see on screen printed out in front of me. Without them I have to change everything on a trial and error basis each time in Photoshop. I've read about it in the HP manual and seen it work on another (cheaper) HP printer on a similar Intel iMac but with the All-in-One I just get the screen saying "No User Selectable Settings" - which HP say should not be the case. Anyone have any ideas? This screen seems to be vital - unless of course there's a better way of synchronising the perfect image I see on screen with what I get out of this printer?

I have seen this case with hp printers on the intel macs as went the intel macs came out hp's driver release was set for June as that is when the intel macs were suppose to be released i know the new software version 7.9 which is universal fixes all of these issues on the intel based macs.
Just make sure you run the hp uninstaller first HD/Applications/Hewlett Packard
Here is the link for the lates driver
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?lc=en&cc=us&dlc=en&os=2 19&product=441125&lang=en&softwareitem=mp-40934-1

7510 e-ALL-IN-ONE not printing black ink.

I have a Photosmart 7510 e-ALL-IN-ONE printer that has worked beautifully until the last time I replaced the black ink. The printer screen says the ink cartridge is full, yet nothing will print. I checked the vent on the cartridge, it seems to be fine. I performed the clean cartridge procedure, but still nothing. This has been a great printer; what do I do?

I would suggest the troubleshooting steps in the document here to address black not printing on your Photosmart 7510. If the first four solutions listed to not resolve the issue the post here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Officejet 6500 all-in-one stopped printing BLACK only,

Quit printing BLACK in documents, test page, test reports, etc. I changed black cartridge, ran cleaner, performed alignment which failed, no help; ordered a new printhead? Any other ideas? It does print colors!

Hello,
Please download and run the HP Print and Scan Doctor from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

HP OfficeJet J4580 All-in-one not printing the top of page

My HP OfficeJet J4580 has had many problems in the past, but they always have seemed to work themselves out. Currently the issue is that it cuts off the entire top edge of my paper.
I am a college student and it's mandatory that my format and margins are correct, but the printer is cutting off the header completely and most of the top margin. I have tried everything in my power before posting for help. I have reset the printer, restarted the printer, re-installed the printer, tried to do an alignment sheet, etc. but nothing seems to work. I'm at a loss here and would just like to be able to print things without having to go out and buy a new printer because this printer isn't that old.

@syddie101 I was looking at this printer spec online, and I saw the margin specification. Take a look at this page (in the print margin section). 3mm top margin seems to be quite small for many document headers, but just to check, is your top margin less than 3mm?
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01430100&tmp_task=prodinfoCategory&cc=us&dlc=en...
If your document top margin is not less than 3mm, are you printing double-sided?
Though I work for HP, I'm speaking for myself and not HP. I'm just trying to help with my limited knowledge
**Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.**

HP Officejet 4620 All-in-One Loses Connection to Wireless Network When It Goes Into Sleep Mode

My HP 4620 All-In-One wireless printer works fine until it goes into sleep mode. Once it goes into sleep mode, it doesn't wake up if a print job is sent to it. If I wake it up manually by pressing the blinking on/off button, it still doesn't print. If I completely turn it off and then on again, the print job that was queued on my computer will start printing, but that's a huge pain and waste of time nearly every time I want to print. I've installed all available updates. I also assigned a static IP address in an effort to correct this but nothing helps. I see that others have complained about this problem, but I do not see that anyone has had success resolving this. My operating system is Windows Vista. I use a Link-Sys Wireless G Router. Thanks.
This question was solved.
View Solution.

so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

I cannot get my HP officejet 4215 all-in-one to print graphics

how do i get my HP officejet 4215 all-in-one to print graphics. as an example if i print my visa statement the visa logo and bank logos don,t print

bamajim,
Here is a link to a page for your printer that may help with your issue.
The document provides steps to troubleshoot printouts that do not match the screen while printing from the web.
Does this also happen when printing graphics from somewhere other than the web ?
Once you give these steps a try let us know what happens.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

HP OfficeJet 5505 All-In-One wireless printing.

I've got a problem getting a HP OfficeJet 5505 All-In-One printer working with a Time Capsule for wireless printing.. I'm not quite sure how to debug this, so I'm asking for a little help.
If I connect the printer directly to the Mac, It is properly recognized when I go to add it into the printers list, and documents print normally.
Now when connected to the TimeCapsule, It looks to be recognized in the Airport Utility, and when I go to add it into the printers list, I can see it connected to the Time Capsule.. One difference is that I have to manually choose the printer driver rather than it being auto selected..
When I print a document, it looks like it spools up normally, and gets sent to the printer.. However the printer never starts, or prints.
After reading a few posts it looks like there might be some compatibility issue between office jet printers and the Time Capsule/Airport Extreme as I am not the only one with issues.
Any ideas?

The OfficeJet 5505 uses LIDIL (lightweight imaging device interface language) which depends on the host computer for low level commands. It will not work with the Time Capsule's USB port.
Technically, neither the printer nor the TC is at fault. The printer will only work when connected directly to a computer's USB port. Searching for drivers will be a futile exercise.
Sorry for the bad news. If you want to get a printer on your network, get a network printer.

HP 6500 all in one not printing in black and cartridge is full

my printer suddenly stopped printing in black, all other colors come out fine. The carriage moves as though it is printing, but the page is blank, where black text should be. I have cleaned and aligned the print heads several times. This occurred after an HP tech uninstalled and reinstalled my HP software and drivers. Prior to this had problems on and off, but it was easy to run print and scan to repair it. Now print and scan says they find no problem with the printer.

Hey @Theresalbritt,
Welcome to the HP Support Forums!
I understand that you are not able to print in black ink on your HP Officejet 6500 All-in-One Printer. I would like to assist you today with resolving this print quality issue. Thank you for including the troubleshooting steps you have completed prior to reaching out for support. To start troubleshooting I am going to have you print a standalone Print Quality Diagnostics Report from your printer. This report will help us determine if this issue was caused by a software or driver conflict on your computer or a hardware issue on your printer that coincidentally occured when the HP Technical Support agent was working with you. Once we determine if this issue is hardware or software and driver related I will be happy to guide you towards a solution. Please follow the steps below.
How to Print Quality Report:
On the product control panel, press the Setup button () until Print Report displays, and then press OK.
Press the Right Arrow button () to select Print Quality Report, and then press OK. The report prints.
If this report prints perfectly: Than the issue that you're experiencing is not hardware related. Rather, there is a driver or software conflict occuring on your computer that is affecting your black print quality. Please do not proceed with troubleshooting at this time.
If this report prints with quality defects or missing black: Than the quality issue that you're experiencing is being caused by a hardware issue within your printer. This issue may be due to a defective Printhead system. In no way does the computer affect this hardware issue. To resolve this conflict can I please have you click here. Once the support document opens please run through Solution one, Solution five, and Solution six. This includes any sub-steps under the listed Solutions. However, because you note that you have already cleaned the Printhead multiple times do not run a Printhead cleaning again. You do not want to exceed three Printhead cleans if there is no difference in quality because when you clean the Printhead ink is used. If three cleans has not resolved your issue proceeding with additional cleans will just waste ink. Should the black printing issue persist please click here and run Step 7 and Step 8 to manually clean and soak the Printhead mechanism.
Please respond to this post with the result of your print quality troubleshooting. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Photosmart 6520 all in one not printing

Hello,
My HP Photosmart 6520 all in one printer will not print anything in black and it has a brand new cartrige in it. I have tried restarting the printer, and the computer and it is not helping. Please help.

Hi Roselilith823,
I came across your post and was wondering, was the issue you were experiencing resolved?
Roselilith823 wrote:
Hello,
My HP Photosmart 6520 all in one printer will not print anything in black and it has a brand new cartridge in it. I have tried restarting the printer, and the computer and it is not helping. Please help.
If you are still having difficulty, please call Phone support regardless of your printers warranty status. The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
Please let me know the outcome, and/or if the issue had already been resolved. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP Officejet 4620 All in One Not Printing Black-BRAND new cartridge

Similar Messages

Maybe you are looking for