Hp officejet 6100 eprinter will not install on windows 7 64bit

Question

I've tried everything. Cannot install software for brand new hp officejet 6100 eprinter. No using disc, not wireless, not usb, not downloading software not troubleshooting in windows nothing what so ever. It's been weeks and weeks, just can not use this printer in anyway on HP Pavilion dv7-3060us Entertainment Notebook PC
Serial Number:   [edited by Moderator]
Product Number:   VM237UA
Can't attach screen print of error messages here.
install does not finish: A fatal error occurred preventing product use. Click "Cancel" to cancel install.
MSIExec command: /i "C:"\HP_ePrint\Setup\Core\SIPM_64\HpTcpMon65.msi"/qn REBOOT=ReallySuppress
Path: <empty>
Return code: 1603
Troubleshooting HP printer software installation
We are sorry that our printer software encountered an error while installing.
Your printer software did not install successfully. You may have seen an error similar to one of the following:
"Device setup failed to complete"
"Unknown device"
A red X displays after connecting the USB cable
On the following screens, you will find troubleshooting solutions that our support agents have found to be the most helpful to resolve install errors. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved. Also, this troubleshooter includes buttons to make certain steps easier. If a button doesn't work or you would like to do the steps yourself, you can view the manual steps by expanding the hidden text below any button.
To begin troubleshooting, click Begin USB Troubleshooting, below.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software
This solution consists of multiple steps. Make sure you complete each step before continuing to the next one.
Uninstall the HP software
Even if the HP software installation failed, some components might have partially installed on your computer. Follow these steps to remove them.
Disconnect the USB cable from both your printer and computer (if it is currently connected).
Click here to open the list of currently installed programs.
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type control panel in the Search (Windows 8.1) or Search Apps (Windows 8) box.
Click or tap the Control Panel icon.
The Control Panel window opens.
Under Programs, click Uninstall a program.
On the taskbar, click the Windows icon, and then click Control Panel.
The Control Panel window opens.
Under Programs, click Uninstall a program.
On the taskbar, click Start, and then click Control Panel.
The Control Panel window opens.
Double-click Add or Remove Programs.
In the list of installed programs, click your HP printer name, and then click UninstallChange/Remove.
Follow the onscreen instructions to complete the software removal.
Caution
If the uninstaller asks you to remove shared files, click No. Other programs that use these files might not work if you delete the files.
You may be prompted to restart your computer.
Note
After the restart, this troubleshooter will open and return to this page automatically.
Click Next Step below to continue with the next step in the solution.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Run the Microsoft Fix it troubleshooter to reset the registry entries
Sometimes the uninstall does not completely remove the software. Microsoft provides an automated fix for this problem on their web site. Follow these instructions.
Click here to open the Microsoft support solution: 
If you like, review the information on the Microsoft web page.
We recommend that you click Run now in the Microsoft Fix it section to fix the problem.
Follow the onscreen instructions in the Microsoft wizard:
On the Are you having a problem installing or uninstalling a program? screen, click Uninstalling.
On the Select the program you want to uninstall screen, scroll through the list of programs and choose the entry for your HP printer series, and then click Next.
When the Microsoft wizard completes, you will be prompted to restart your computer. Click Yes to restart.
Note
After the restart, this troubleshooter should open and return to this page automatically. If it does not open by itself, open it manually after the restart.
Click Next Step below to continue.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Disable startup services
Windows allows many programs and processes to run immediately upon startup. These programs may be preventing you from installing the HP software. These directions explain how to disable these programs and processes temporarily so that you can install the printer software.
Click here to open the System Configuration Utility dialog box. (It may take up to a minute for this to open.)
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type msconfig in the Search Apps box.
Click or tap msconfig.
On the taskbar, click the Windows icon.
Type msconfig in the Search programs and files dialog box, and then press Enter.
On the taskbar, click the Windows icon, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
On the taskbar, click Start, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
Check to see if Normal Startup or Selective Startup is currently selected. If Normal Startup is selected, follow the indicated steps, below. If Selective Startup is selected, follow those steps instead.
Note
Follow the appropriate instructions for your startup type. You only need to follow one set of instructions, not both.
To disable a Normal Startup
To disable a Selective Startup
Select Selective Startup, and then clear the Load Startup Items check box.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
Click Disable All.
Click the Startup tab, click Open Task Manager, and make a list of the items that are selected.
You will need this list to reset your computer startup items later.
Click the General tab, and then clear the Load Startup Items check box.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
Make a list of the items that are selected.
You will need this list to reset your computer startup items later.
Click Disable All.
Click Apply, and then click OKClose.
A new window displays. Click Restart to continue.
Note
After the restart, this troubleshooter will open and return to this page automatically.
Upon restarting your computer, the System Configuration Utility window may display. If it does, select the Don't show this message... check box, and then click OK.
Click Next Step below to continue with the next step in the solution.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Reinstall the HP software
Now that your system is updated, try installing the HP software again.
Turn your printer on.
If you are using a USB connection, disconnect the USB cable from both your printer and computer (if it is currently connected).
Reinstall the software using the CD that came with the printer, or download and install the latest version of the software for your printer from the HP web site (recommended):
Click here to go to the HP Printer Install Wizard download page.
Follow the directions to download and run the HP Printer Install Wizard.
Follow the onscreen instructions to download the printer software for your version of Windows.
The HP Printer Install Wizard downloads and starts the software installation.
Note
A full Windows 8 or Windows 8.1 printer software install may not be available for all products. Click here to find out if a Windows 8 or Windows 8.1 download is available for your printer.
Follow the onscreen instructions, making sure to proceed all the way through the installation without canceling or exiting any screen.
Note
Do not connect the USB cable until you are prompted, or an install error may occur. Also, if your software is still not finding your printer over the USB connection, review the following USB tips.
+ USB tips
Ensure that your USB cable is no more than 5 meters (16.4 feet) in length. (For best results, use a cable that is less than 2 meters (6 feet) in length.)
Try connecting the USB cable to a different USB connector on the computer. (For example, if you plugged the cable into a front USB port, try plugging it into a port in the back.)
If the USB cable is connected to a USB hub or a docking station for a laptop, it could cause the installation to fail. Even if you believe that your USB hub works fine, try connecting the USB cable directly to the computer during the device installation (when prompted). You can always move it back to the USB hub later.
If you need to use a USB hub, use one that is externally powered instead of using a non-powered hub.
When the installation completes, try using your printer.
Turn your printer on.
If you are using a USB connection, disconnect the USB cable from both your printer and computer (if it is currently connected).
Reinstall the software using the CD that came with the printer, or download and install the latest version of the software for your printer from the HP web site (recommended):
Click here to go to the HP Support & Drivers web page.
Select the option to download drivers and software, and then type the name of your printer in the search box.
For example, type HP Photosmart B211.
Follow the prompts and make selections to display the software and drivers for your printer.
When prompted, select the appropriate version of Windows, to view the driver download and CD ordering options.
Tip
If you're not sure whether your operating system is 32-bit or 64-bit, click the Is the Windows version on my computer 32-bit or 64-bit? link on the page for help.
If given a choice, select the full feature software and drivers link.
This option may appear in an area labeled Drivers.
When prompted, click Save, and download the software to your desktop or a folder where you can easily find it.
Start the HP software installation by running the install program that you downloaded.
Follow the onscreen instructions, making sure to proceed all the way through the installation without canceling or exiting any screen.
Note
Some printer models require a USB connection during the install. If you are prompted by the software, connect the USB cable. Do not connect the USB cable until you are prompted, or an install error may occur. Also, if your software is still not finding your printer over the USB connection, review the following tips.
+ USB tips
Ensure that your USB cable is no more than 5 meters (16.4 feet) in length. (For best results, use a cable that is less than 2 meters (6 feet) in length.)
Try connecting the USB cable to a different USB connector on the computer. (For example, if you plugged the cable into a front USB port, try plugging it into a port in the back.)
If the USB cable is connected to a USB hub or a docking station for a laptop, it could cause the installation to fail. Even if you believe that your USB hub works fine, try connecting the USB cable directly to the computer during the device installation (when prompted). You can always move it back to the USB hub later.
If you need to use a USB hub, use one that is externally powered instead of using a non-powered hub.
When the installation completes, try using your printer.
Whether or not you installed the software successfully, make sure you follow the instructions in the next step to enable your startup software, or your computer may not function in the way you expect. Click here or click Next Step below to continue.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Enable startup services
If you disabled startup services earlier, make sure you follow these steps to enable them again or your computer may not function in the way you expect.
Click here to open the System Configuration Utility dialog box. (It may take up to a minute for this to open.)
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type msconfig in the Search Apps box.
Click or tap msconfig.
On the taskbar, click the Windows icon.
Type msconfig in the Search programs and files dialog box, and then press Enter.
On the taskbar, click the Windows icon, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
On the taskbar, click Start, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
If you disabled a Normal Startup, follow the indicated steps, below. If you disabled a Selective Startup, follow those steps instead.
Note
Follow the appropriate instructions for your startup type. You only need to follow one set of instructions, not both.
To enable a Normal Startup
To enable a Selective Startup
Select Normal Startup.
Click the Startup tab, click Open Task Manager, and then selectenable every item from the list you made in a previous step.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
On the Services tab, select every item from the list you made in step A.
Click Apply, and then click OKClose.
A new window displays, prompting you to restart.
Note
After the restart, this troubleshooter should open and return to this page automatically. If it does not open by itself, open it manually after the restart.
Try using your printer again.
If you successfully installed your HP printer, you're done! You can delete this troubleshooter if you'd like.
If the install was not yet successful, click here for further assistance.
  Home Begin USB Troubleshooting>
Further Assistance Exit Start Over
Give us feedbackclose
Give us feedback
Select your answer, and then click the button that appears to send us your results.
Did this solution solve your problem?
Yes, it solved my problem No, it did not solve my problem I want to give HP more feedback. Take me to a short online survey to provide additional comments on how to improve this solution.
Exit without giving feedback  
 close
 close
Confirm Exitclose
Exit Troubleshooter?
YesNo
For Further Assistanceclose
For Further Assistance
Visit HP Support Forums and connect with HP users to get insights, tips, and answers to questions about your product. Follow the link below to view the forums.*
Click here to go to the online HP Support Forums.
If you are still unable to install the HP software, please contact HP support.*
Click here to find HP contact information for your country/region.
* Support options and availability vary by product, country/region, and language.
OK

Answer 1

Hi @prdstudio3 ,
Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP