Hp officejet 6110 not printing since upgrading to windows vista

I have recently upgraded my hp laptop from windows xp to vista and am now unable to print to my approx 4 yr old hp printer (officejet 6110). I get a message on my computer saying USB device not detected. I have tried all the solutions suggested by hp on their website under "print jobs are stuck in the print queue and will not print with a USB connected printer in windows vista" but problem unresolved. Can anyone help?

No.Currently using it as a fax and photocopier only. If you find a solution please let me know.Thanks.

Similar Messages

  • Hp photosmart 7525 not printing since upgrade to windows 10

    Unable to print since upgrading to Windows 10.I've deleted the printer and reinstalled the driver to no avail.

    Hi , Welcome to the HP Forums, and thanks for posting! :cathappy: I'd like to help you get your HP Photosmart 7525 e-All-in-One printer up and running on your new Windows 10 operating system. You've mentioned that you already tried installing the drivers from the HP website. If the Windows 10 driver that you have downloaded does not work, I'd recommend trying the Windows 8.1 driver (the operating systems have the same core functionality, so the Windows 8.1 driver works fine on Windows 10). You can also try uninstalling the software you do have, and re-installing using the HP Printer Install Wizard. The Printer Install Wizard, can fix many software issues automatically. Hope this helps!

  • Since upgrading from Windows Vista to Windows 7 both Internet Explorer and Firefox will not recognize the numbers keys of my keyboard. I get numbers in Word and every other situation, just not in the internet programs.

    Since upgrading from Windows Vista to Windows 7 both Internet Explorer and Firefox will not recognize the numbers keys of my keyboard. I get numbers in Word and every other situation, just not in the internet programs. I have tried uninstalling Firefox and reinstalling with no results.

    If there are problems with importing the IE Favorites in Firefox then export the favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager.
    If you do not have the menu bar in IE then right-click the toolbar at the top to enable the Menu Bar.
    *Export the favorites in IE to an HTML file (bookmarks.html):<br>File > Import and Export
    *Import the HTML file in Firefox:<br>Bookmarks > Show All Bookmarks > Import & Backup > Import Bookmarks from HTML
    See "Import from another browser" and "Import from file":
    *http://kb.mozillazine.org/Import_bookmarks

  • WRT54G wireless not working after upgrading to windows vista, please help

    Hello everyone....
    I have a few problems. I upgraded to Windows Vista and cant seem to get my wireless internet working. My router is WRT54G wireless-g broadband router. Ever since I upgraded Vista my xbox 360 will not connect.
    I just bought a new wireless web camera and that does not work either because the wireless is not working.
    Any suggestions on what I should do to solve this issue?
    I noticed when I goto 192.168.1.1 my firmware version is Firmware Version: v3.03.9 does that have anything to do with it? Is there a more up-to-date version that will help?
    Hope to hear from someone.

    I have the same problem, and so does my son, he has a toshiba satellite new laptop and I have an acer new laptop, both have Vista on them, and my wife has XP and has no problem getting on teh router, but i have this problem everyday.
    Eventually it will all of a sudden show up and connect and start working, then if you laeave your computer in standby movde overnight, it will still work in the morning, but if you shut down comeplety you will lose the connection for who knows how long. what is the fix Linksys?
    (Edited post for guideline compliance. Thanks!)
    Message Edited by JOHNDOE_06 on 12-28-2007 07:28 AM

  • Printer is offline when I try to printer since upgrade to Windows 10

    I upgraded to windows 10 and now when I try to print it says printer is offline.  Does my printer work with win 10. Also mine is wireless printer.

    Hi , Welcome to the HP Support Forums! I see that your printer is offline since you upgraded to Windows 10. I will certainly do my best to help you. The Full Feature Software and Driver is available for your printer for Windows 10. I believe we need to update the driver to get it to work. Please download and run the Print and Scan Doctor, it will likely diagnose and resolve the issue you are experiencing. What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)If the Print and Scan Doctor tells you to install the HP Software for your printer. Please go here, and use the Printer Install Wizard to get the latest HP Software for your printer.  Alternatively, you can download and install the latest HP Software here. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good Luck!
      

  • Airport does not work after upgrade to windows vista SP1

    Hi,
    I have a MBP running windows vista 32 bit under bootcamp. For some of my professional software, I need windows. Up to now, everything runs OK.I've upgrade to bootcamp 2.1 and everything still runs just fine. However, I wanted to install SP1 because it fixes some of Vista's (many) flaws. After installing SP1 (it downloads automatically), e.g. airport does not function anymore - it just does not see the wireless anymore (it looks like on my MBP it does no longer find the drivers for e.g. the wireless card). Uninstalling SP1 fixes the problem but brings me back to square 1. Any solutions? Thanks.

    Hi,
    Please reinstall the following package:
        http://ftp.hp.com/pub/softpaq/sp63001-63500/sp6328​7.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • PDF Reader not printing after upgrading to Windows 8.1

    After installing the Windows 8.1 update, the PDF Reader doesn't print. Documents don't even show up in the queue.  I'm able to print from desktop apps (i.e., Photoshop, Word, etc.) just fine so it appears to be strictly a Reader issue.
    Anyone have any suggestions?
    Richard

    Hi,
    Please locate to Windows Charm menu, click Settings, change PC settings, and find Devices option, then remove all printers in Devices.
    Following this, please try printing through PDF Reader.
    Hope this helps!
    Andy Altmann
    TechNet Community Support

  • Iphoto will not print since I've upgraded to Lion. It is looking for themes. It would appear the themes are now missing how do I get them back?

    Iphoto will not print since I've upgraded to Lion. It is looking for themes. It would appear the themes are now missing how do I get them back?

    Thank you, yes this solved my problem...

  • Officejet 6110 slow printing

    My really old (8 years) 6110 All In One has been working well until about two days ago. It started printing very slow, about 5-10 min. per page. It prints at this speed in all modes. It even prints slow on a test page from the printer menu. I have read in the forum that a bad print cartridge can cause this problem. When I turned on the printer this evening, there was an error code that says "remove and check print cartridge". I cleaned the cartridge contacts, but nothing changed. I have no spare cartridges to change out. I can't clear the error code to try a test page. I tried all the tips that I found on the forum, but no luck. Are there any other tricks that I can try? A new set of cartridges will cost me about $60.00. I can buy a new 6500A for $80.00, or an 8500 for $ 110.00. Is it worth wasting any more time on this, or is it time to replace the old printer?
    Thanks, BFK
    This question was solved.
    View Solution.

    This is caused by the failure of one of your cartridges. I do not recall if the Officejet 6110 will print in reserve mode, but try the following: Remove the black cartridge and print a test page.  Does the printer print at normal speed?  Is so the black cartridge was the issue and should be replaced.  If not then put the black cartridge back in and remove the color cartridge and print test page.  If the printer now prints normal speed the color cartridge was at fault and needs to be replaced.
    Do you print a lot?  The 6500 and 8500 have  a separate ink supply and printhead.  They are most suitable for frequent printing.  If you only print occasionally the Officejet 6110 may be a better choice since it has less overhead for servicing.
    If the printer will not print with one cartridge removed then I would replace the black cartridge with a #27, available for $20.  If this does not resolve the issue you could try the color #28 cartridge, about $26.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Can no longer print since upgrading modem.

    can no longer print since upgrading modem.  none of our apple devices see the HP printer anymore.  they used to.  says no airprint printers found.  any thoughts on how to fix?

    If you upgraded the modem......but you have not reset the printer back to its original default settings and then set it up again......now would be a good time to do this.
    The printer still has the programmed settings to connect to your old modem, and it cannot find it, because it is no longer there. The printer is lost, and does not know how to find its way. It needs to be set up again with new settings to match your new modem.

  • Elements 11 will not print to my epson stylus r1800 printer after upgrading from windows 8 to 8.1

    Elements 11 will not print to my Epson stylus r1800 printer after upgrading to windows 8.1 from windows 8

    I cant access any printers, not even the virtual printers.
    What I would do is use ProcMon to find out why that Event entry was written.  Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable.  Since IE9 there have been new .dll  involving printing
    which have not been reflected in any of our repair tools.  However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
    unreliable techniques.   E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
    and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.)   For example.
    Robert Aldwinckle

  • Since upgrading to Windows 8.1, iTunes no longer recognizes my iPhone or iPad.  I tried to reinstall iTunes.  That did not address my problem.  Any suggetions on what I should do?

    Since upgrading to Windows 8.1, iTunes no longer recognizes my iPhone or iPad.  I tried to reinstall iTunes.  That did not address my problem.  Any suggetions on what I should do?

    Hey Bob0725!
    Here is an article that will help you troubleshoot this issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • Since upgrading to windows 8.1 I can not see any local files in the files window.

    I have recently upgraded to windows 8.1 and can no longer see my local files in the files window. All remote files for all remote sites are visable.
    If I change sites under local view get error thet dreamweaver can not update cache

    Thanks Nancy
    It certainly worked in windows 8.
    I have deactivated and am trying to reload software inside of windows 8.1.
    Will let you know.
    Thanks again
    Terry
    Date: Fri, 1 Nov 2013 12:13:57 -0700
    From: [email protected]
    To: [email protected]
    Subject: Since upgrading to windows 8.1 I can not see any local files in the files window.
        Re: Since upgrading to windows 8.1 I can not see any local files in the files window.
        created by Nancy O. in Dreamweaver support forum - View the full discussion
    I honestly don't know if DW CS5 is compatible with Win 8.1.  The OS compatibility FAQ only mentions DW CS6 & CC.
    http://helpx.adobe.com/x-productkb/global/windows-8-1-compatability.ht ml
    Maybe someone else can shed more light on this.
      Nancy O.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5807551#5807551
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5807551#5807551
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5807551#5807551. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Dreamweaver support forum at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • HT3258 My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion.  I was wondering if there is a solution to getting this working again?

    My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion.  I was wondering if there is a solution to getting this working again?

    You just need to update it to the latest version.  See:
    http://kb.parallels.com/114449

  • Computer doesn't recognize my printer since upgrade

    my computer doesn't recognize my printer since upgrade to yosemite

    Hi ..
    Try a reset >  Mac OS X: How to reset the printing system
    If a reset doesn't help, visit the website for your printer manufacture then search for v10.10 Yosemite drivers to download and install.

Maybe you are looking for