HP Officejet 6210 All-in-One, print custom sized paper

I need to print on size 3 3/4 x 8 1/2 paper. I click on custom size, then format the size, but it always reverts to 8 1/2 x 11.
They suggested I go to the chooser to choose the Officejet 6210, but it is not one of the choices. Is there another choice that would be compatible? I'm on a deadline to print my daughter's wedding programs...any help would be appreciated!
Is there something I could download to update my printer so it could print on this size paper?

Yes, but it is hard to get working and only supports printing, not scanning.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Missing file after installing software for Officejet 6210 All-In-One printer.

I got the following error message: "The file C:\{Program Files\HP\Digital Imaging\skins\oov1\skin.xml does not exist". Can anyone tell me where to get the file and then how to download it? Your help will be much appreciated.

HI knewsomga,
WIA is Windows Image Acquisition, it is a proprietary Microsoft driver model and application programming interface (API) for Microsoft Windows Me and later Windows operating systems that enables graphics software to communicate with imaging hardware such as scanners, digital cameras and Digital Video-equipment. - Source
Please follow the instructions below.
Please hold down the windows flag key and the R to open the Run box.
Type services.msc and press Enter
Locate Windows Image Acquisition (WIA)
Right click and open Properties
Stop the service from the General tab and then Start it again
Verify that the Startup type is set to Automatic rather then manual
Also, look for 'Shell Hardware Detection' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically from its properties.
Locate the 'Remote Procedure Call (RPC)' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically as well.
If the issue persist, the HP Print and Scan Dr might help, otherwise I suggest contacting Microsoft.
Click here to download and run the utility > HP Print and Scan Doctor
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Printing from 10.6.6 to an HP Officejet 6210xi All-in-One printer

I have a brand new iMac - 27-inch, 3.2Ghz running 10.6.6 - connected to an older printer, an HP Officejet 6210xi All-in-One printer, and I am unable to print.
Running the Printer System Preferences sees the printer via USB, and I install the print-drivers that come with Snow Leopard, but absolutely nothing prints. Trying to print just produces a useless "Error" error-message in the print-queue window, with no detailed explanation as to why.
I have tried downloading and installing the latest MacOS print-driver from HP, but this doesn't help. I can't print a single page.
I assume I should be using the print-drivers that come with Snow Leopard, but I have no idea why printing does not work. I can disconnect the USB cable from the new iMac, and connect it to my older iMac, running 10.4 and printing works fine. So I know that the USB cable and printer are OK. But if I move the USB cable to the new iMac, printing does not work at all.
I have tried different USB ports on the new iMac, I have disconnected all USB cables and restarted the iMac, then re-connected only the USB cable to the printer, but no luck.
Any ideas as to what else I can try?
Thanks,
--- Christer

When you say you have installed the latest print driver from HP do you mean from the HP site or do you mean using Software Update/from Apple site?
If you mean the All-in-one package that sits in your app folder try uninstalling that, (there is an uninstaller in it), and then try again with OSX.
I think when you plug in your machine the Mac should recognise your printer and ask if you want to download the appropriate SW.
So, my steps would be.....
1). Uninstall the HP All in one.
2).Restart.
3). Plug in to Mac, (and power), and switch on 6210.
4). Wait a few seconds for the Mac to recognise and prompt, or run Software Update.
......if still no joy;
5). Re-apply combo updater.
6). Plug in to Mac, (and power), and switch on 6210.
7). Wait a few seconds for the Mac to recognise and prompt, or run Software Update.
8). Come back and curse/thank me, then go back to the HP site and see if a more up to date package exists

How do i disassemble the printer hpofficejet 6210 all in one ( paperjam with glue paper - gluein)

HP officejet 6210 all in one
Paper jam with selff-stick paper. I can not remove it. I tore it apart while trying to remove it, and now I can no teven see the left over self-stick paper. I need to disaasemble the unit to remove this glue paper.
Wher can I find tool or how do I diassemble it so I can remove the rest of the selfsticking paper.
Thanks
Charlie

The main part of the output tray is not removable. There are a few alternatives: the input tray can be pulled partially open and the printed pages loaded in it - it should not be necessary to remove the input tray completely. The other possibility would be to just print using the automatic duplexer. If you are printing on plain paper or index paper this should work, it would not be suitable for printing on the back side of photo paper.

Using Mac OS 10.6 to drive HP officejet 6210 all-in-one

Have Mac mini using Mac OS 10.6 and HP officejet 6210 all-in-one. Cannot get HP 6210 to print program from OS 10.6.Will Mac OS support HP 6210?

Welcome to the Apple discussions.
Have you downloaded the HP printer drivers for the 6210: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76195-1 &lc=en&dlc=en&cc=us&os=219&product=421991&sw_lang=&key=null&site=null

HP OFFICEJET J4580 ALL IN ONE PRINTER

I AM STAYING AT MY DAUGHTERS WITH MY LAPTOP, AND NEED TO KNOW HOW TO INSTALL HER HP OFFICEJET J5480 ALL IN ONE PRINTER, SO I CAN PRINT WITHOUT HAVING TO E-MAILING TO MYSELF, AND THEN PRINTING OFF THE E-MAIL..I DON'T KNOW A LOT ABOUT COMPUTERS OR PRINTERS, SO PLEASE MAKE ANSWER AS BASIC AS POSSIBLE

Hello HOWIERD. I understand you would like assistance on installing the printer on your daughter's computer. HP contains this website which will assist you with installing the printer: http://www8.hp.com/ca/en/support-topics/printer-installation/install-download-printer-drivers.html
Please let me know if you found this useful or not. If you require further assistance, I will do my best to assist you.
Mario
I worked on behalf of HP.

HP Officejet 4500 All-in-One Printer - G510g installation windows 8.1 64bit

After operating a HP Officejet 4500 All-in-One Printer - G510g from both an old Windows XP notebook and from an ASUS Windows 8, 64bit laptop, subsequently updated to 8.1; I'm now trying to install it to run from a Toshiba Satellite NB10T-A notebook Windows 8.1 64bit, but without success.
The original installation CD does not provide an installation but on start up (presumably because it is only compatible with Windows XP and 7.
The www.hp.com site offers a download of a full driver for the printer, forWindows 8.162bit. This seems to download fine. The file unpacks, says it is installing, but on completion the driver is not available.
There are no options to uninstall, either in control panel/printers or in control panel/software.
Without the driver, the Windows 8.1 system recognises the printer and allows simple printing ffrom applications. However, it is not possible to use the scan options, giving the error message that the driver is not available. Neither HP Solution Center or HP Document Manager are installed.
I have tried HP Print and Scan Doctor. This recognises the printer on USB link, says that there are missing drivers, downloads, unpacks and installs drivers. But the printer icon in control panel/printers continues to have an alarm icon and indicates that the printer is still missing drivers.
I have also tried the HP Printer Installation Wizard. The result is similar.
Please advise how I can install the scan options of this equipment and confirm that the machine is compatible with windows 8.1 64bit.
Thank you
This question was solved.
View Solution.

Hello @monc , welcome to the HP forums!
I read through your post about how you cannot scan on your Windows 8.1 computer as the driver and software doesn't seem to be completing successfully on your system. However, you have been able to install the printer and its functioning fine on other computers.
I would suggest checking the Control Panel to see if there are any printer files to uninstall: Uninstalling the Printer Software
Restart the PC afterwards
Perform a Clean Boot
Restart the PC again
Download and install the printer again: HP Officejet Full Feature Software and Driver
If you see any error messages or codes during the installation process, make note of the exact problem or error and post me back a screen shot or the details.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet J4680 All-in-One printer is ghosted and renamed "HP Officejet J4680 Series (Copy 1)?

Printer Model, Notebook or Desktop Model Number: HP Officejet J4680 All-in-One Printer
Operating System (including service pack revision): Windows 7 64-bit Home Premium Service Pack 1
Error messages: None
Recent hardware or software changes made to the system: None
Problem Description: HP Officejet J4680 All-in-One printer is ghosted and renamed "HP Officejet J4680 Series (Copy 1) and a new printer appeared: HPD8D625 (Officejet J4680 series). I don’t know how this all came about or why?
I used the HP HPD8D625 for a while but it took a long time to began to print and only buffered a small amount. I went back to my stand by printer, but know my wife want to use the wireless network to do her printing, so I have to fix it.
Connection Method: Wireless
Diagnostic Summary
Troubleshooting performed: Yes
First Wireless Network Report:
Everything: Passed
Signal Strength: Excellent
Other networks detected matching your network name (SSID): No
Configuration Summary
Network Name: Correct
IP Address: Correct
Config Source: DHCP
Communication Mode: Infrastructure
Authentication Type: WPA-PSK
Encryption: Automatic (AES or TKIP)
Second Wireless Network Report:
Network Name: Was different
Of course that disrupted the whole report.

BH
Thanks for responding. What I did today was hard wire the printer to computer. then was able to get my original printer icon back and it was set as the default printer. I deleted the other icons, they were ghosted and I didn't what to use them. the one was a online printer going back to HP. Now I have to got my son to fix the remaining problem I have, with my messing around I somehow change the Network Name on the printer. He is a computer eng working on high tech cameras and also is the administrator of my machine. He has me locked out of administrative rights and for good reason, I wrecked a couple computers and when he built this one for me that was the rule. There is a little info that I don't have to finalize the last step in changing the Network Name back. I have run the printer from the printer control panel and it did find the correct Network and Network Name but is seemed like that is far as I could go. So I'm not that far from completing this project.
LH

HP Officejet 4630 all-in-one printer Cancels Print in Middle of Job

Hi,
I recently bought an HP Officejet 4630 all-in-one printer, and it automatically cancels jobs in the middle of printing. The computer I am using is an HP Envy dv7 with 64-bit Windows 8, and I am printing over a wireless network connection. My computer receives an error that HP Officejet 4630 series couldn't complete print and the printer simply says canceling. I have tried all the steps in the troubleshooting sections, both for printing issues and network connections. I've uninstalled and reinstalled the software multiple times, I've established a manual IP, and everything else, but nothing seems to work. It also seems to have the issue when using HP ePrint. It happens in all sorts of programs and formats such as word, pdf, and html. Unfortunately, I did not receive a USB cord, so I can't see if that will fix the problem at all. Hopefully somebody can help me with this, otherwise it's obvious that there's a problem with the actual printer I got and I'm going to have to get something else.
Thanks
This question was solved.
View Solution.

This is how I fixed it:
Find out what the IP address is that your printer is using.
Then go to control panel and click on "View Devices and Printers".
Look for your printer an right click.
Click "Printer Properties" and a new screen will open.
Along the top you will see some tabs. Click the one that says "Ports"
Click "Add Port"
Highlight "Standard TCP/IP Port" by clicking on it, then click "New Port". A new screen will open.
Click "Next"
Type in the IP Address of your printer and click "Next"
Your computer should find your printer.
Click "Apply" and your printer should work correctly.

I have an HP Officejet 7210 all in one printer, have loaded Printer Pro to IPad, get successful test pages in the Print Pro App but can't print emails (or anything). error message is No AirPrinter found. How can I get connected?

I have an HP OfficeJet 7210 all in one printer, have loaded Printer Pro and had a successful test while in Printer Pro. When I try to print and email I get NO AIR PRINTER message, How can I connect my printer to my IPad and print emails.

Welcome to Apple Support Communities.
If you're using the Printer Pro app, you're not going to use AirPrint services.
They are not the same thing.
Are you using the 'Open In' option to get the email into Printer Pro for printing?
http://itunes.apple.com/us/app/printer-pro/id393313223?mt=8
Once installed, Printer Pro appears in the "Open In..." list on your device. This lets you print documents from Mail, Safari, ReaddleDocs and many other applications on your iPad that supports this function.
Using "Open In..." approach you can print files from many popular online storages: Dropbox, MobileMe iDisk, GoogleDocs. It just a matter of several taps to download your file via free Dropbox, iDisk or Google Docs application and send it to printer.

HP Officejet J4550 All-in-one printer Unable to print pages/photos from system request !

I have an HP Officejet J4550 All-in-one printer that I had set p when I bought my new Acer system with Windows 7 installed and had no problem from the beginning to set-up the installation and have it running as My Default printer and has worked fine up until now ; when all of a sudden the system ;when I go to print a page/photo brings up the set-up - shows the printer as Default and then when I run PRINT...there is No page/photo printed out ? I have tried to run the Diagonistic software and shows the printer as Default and No problems and yet still delivers No Print out ? My system has had All up-dates automatically installed up till this point ...So I not being a Techie ,do not know what or where to look for help to resolve the issue next ? Anyone able to tell me what to look for to do or how to resolve the issue or do I need to just Un-install the printer and Re-set it up again ?? I have tried to look at all places on HP ;but it does not even show my older HP Officejet -J4550 - All-in One Printer ? Just keeps referring to HP Officejet -4550 ? Loooking for any answers ! Thank Yopu ,JS

Hi jspin3,
I'd like to help. For now, I would hold off on the uninstall and reinstall. Can you answer some questions?
Is the printer connected by USB, Ethernet or wireless?
Do you get any error messages?
Does a blank page come out or do no pages come out when you try to print from the computer?
If you put a document face down on the scanner glass, are you able to make a photocopy?
Can you estimate the ink levels, in percent full for each cartridge, by looking at the printer ink gauge? Click Here
If you print a Self Test Report, do all of the colors print?
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

My PC can't stand the connection to HP Officejet 4630 all-in-one printer

Hi everybody,
I got a HP Officejet 4630 all-in-one printer, i manadge to connect it to the network. I select a static IP and i can reach the printer through the browser.
I can add the printer to the PC, the system can find it after few second od scannig, and than i can print a test page.
The problem is that if I reboot the PC or the printer, or both, i can' print no more.
The icon of the printer in the "device and printer panel" is blurred with the green thick, but i can still reach the print through the browser and i can print with the ePrint.
If I use the "problem solving" service of Windows, it can't find any problem. But i can't still print.
I don't know what to do, it seems a problem of the computer (i even tryed to turn off the firewall but it doesn't change anything)
Is there someone that could help me?
Thank you so much

Hi @poporni,
Welcome to the HP Forums!
I noticed that your HP Officejet 4630 keeps losing the wireless connection on Windows 7. I am happy to look into this connection issue for you!
Please, take a look through this guide, Printer Does Not Maintain Wireless Connection.
Tips for troubleshooting wireless connection issues
The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
I would also recommend, our HP Wireless Printing Center - Troubleshooting Issues website.
Hope this information is helpful, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP OfficeJet 6500A all in one Printer . No European size envelopes apart from C6 on the printer.

We have the OfficeJet 6500A All In One Printer. It is on a network to two computers one using Windows Vista and the other Windows7.
It seems strange that the only size of envelope for the European Market is a C6. There is no facility for customising a DL or C5 which are the other two popular sizes of envelopes. We cannot customize from either computer. We have tried altering the specifications of other envelopes listed for the printer but to no avail. Has anyone got a solution to this problem or are we going to have to wait for HP to upgrade the printer programme. Word Perfect Office X4 is the word procesing programme in use plus a basic Microsft Word that is OEM.

Hi jspin3,
I'd like to help. For now, I would hold off on the uninstall and reinstall. Can you answer some questions?
Is the printer connected by USB, Ethernet or wireless?
Do you get any error messages?
Does a blank page come out or do no pages come out when you try to print from the computer?
If you put a document face down on the scanner glass, are you able to make a photocopy?
Can you estimate the ink levels, in percent full for each cartridge, by looking at the printer ink gauge? Click Here
If you print a Self Test Report, do all of the colors print?
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

Officejet 7310xi All in One Printer no longer connects wirelessly

Hello all,
My Officejet 7310xi All in One Printer no longer connects wirelessly.
The printer does no show up while searching for it wirelessly where it had previously.
In the past it would say that the printer (HP Series 7300) was offline. I would remove the device through the control panel and search again. A printer would be found as HP Series 7300 (Copy 1) . A "ghost" of the original would remain as an offline device. I would default to the new printer icon, Copy 1, and it would work. This happened over the course of a year without any problems.
Now nothing is working. The printer can't be found by my network. I tried downloading drivers, etc. from HP but they either can't download or stop during installation. I don't know if an Windows 8.1 update affected it.
Although the printer has a built in network set up option, it has no installation wizard. I can't find a way to activate the wireless feature/icon. There is no I.P. address either.
I feel like a monkey pulling levers for a banana! I appreciate your help.

Hey @Kathlanta ,
Thank you for taking the time out of your day to ask that question on the HP Forums today!
I understand you are having issues with your HP Officejet 7310xi connecting and staying on your network. Going through all of this is making you feel much like this;
By the end of this I want you feeling more like this;
Now let's get to the bottom of this and have some fun doing it! (and no, I have not completely adopted the idea that you are a monkey, but for the time being, seems most fitting LOL )
Ok, so what we are going to start with here is; a full print system uninstall and reinstall and run it through USB to test the printers functionality.
Here is how you uninstall the whole printer software on 8.1 >> Uninstalling The Printer
Here is how you install the drivers offline (use the appropriate links to get your steps) >> Installing HP Printer Software for a USB Connection in Windows 8
You wont need to worry about the wireless right yet until we figure out if the rpinter hardware is ok or not. So sit tight on that portion, I'll get that all back and working later after we figure this stuff out now.
Look forward to hearing back from you! Have a good one!
I worked for HP.

HP OfficeJet 6310 All-In-One printer won't print in color with new cartridge

HP OfficeJet 6310 All-In-One printer on a iMAC OSX version 10.9.5 system
Hello,
As I don't print in color much but had need to I discovered my printer not printing in color. I trouble shooted and even replaced with an new HP95 new from Office Depot ( I never buy refilled). The printer still won't print color but it advances the paper as if it was printing - just no ink on paper. I have cleaned thoroughly the ink jet heads, cartridge area, and run all the alignment and printer utilities. The test page print does not show color either. I have no error messages. Don't know what else to do.
thanks
DH

Hi there @dhengr!
Thanks for contacting the HP Forums!
I can see your having a print quality issue with your HP OfficeJet 6310. I should be able to provide documentation that will help locate a resolution. You mentioned you have already tried another HP95 tri-color cartridge with no resolution. I also noticed you said that the quality report from the printer also has no color ink.
If a stand alone test report is performed from the front of the printer such a printhead cleaning or print quality report and there is no color on the page then you are likely looking at a hardware issue within the printer. I have provided a document regarding Missing, Faded, or Dull Colors on the HP Officejet 6310 All-in-One Printer. If you follow the document from start to finish and still have the same issue then I would recommend contacting our HP tech support via phone. They deal with hardware warranty and replacement options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a great weekend and thank you again for posting on the HP Forums!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

HP Officejet 6210 All-in-One, print custom sized paper

Similar Messages

Maybe you are looking for