Hp officejet 6500 wireless 709n is disconnect​ed, how do I reconnect. Windows Vista

reconnect printer

Make sure the cable is plugged in on the PC and printer.  Reboot.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

  • Print Head is missing or damaged HP Officejet 6500 Wireless

    I have an HP Officejet 6500 wireless.  It is installed on a desktop with Windows 7 Ultimate 32 bit.  The printer is telling me it cannot print because the print head is missing or damaged.  I have removed everything and cleaned as directed but still the same error.  Doesn anyone know if I can buy a new printer head for this particular printer?

    Hi,
    Your post is showing up blank. Try using Compatibility mode if you use IE, or use an alternative browser such as Firefox or Chrome.
    MrMatthew - HP Support Forums Moderator
    Click the Kudos star as a way to say "thank you" for helpful posts.
    Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else.

  • HP Officejet 6500 Wireless Scaning black lines on copies

    HP Officejet 6500 Wireless Scaning black lines on copies

    Hello Dadbowling, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are experiencing lines in your copies.  I would like to help.
    I would recommend removing the ink cartridges, and performing a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also recommend following the steps in this document on Vertical Bands, Lines, or Streaks in Copies, Faxes, or Scans.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Can "HP Officejet 6500 Wireless" connect in dual mode?

    Hello,
      I have just purchased "Officejet 6500 Wireless" printer, and have installed with USB to my desktop computer.
    My desktop does not have a wireless connection, it is hardwired to my wireless router port.
    My other laptops are connected wireless to the same router.
    Can I connect my other laptops (wireless) to the printer, while the printer is connected to the desktop via USB?
     In other words, can it print from the desktop computer, and at the same time print from a laptop wireless?
    Thanks in advance.
    This question was solved.
    View Solution.

    Yes you can, but there is no reason to do so.
    Your wireless router (like all of them) treats all its clients equally, whether they are connected by Ethernet wire or wirelessly. Furthermore, all clients can communicate with each other regardless of how they are connected.
    I recommend that you connect your printer to your router with a wired connection if you can (its easier and more reliable) and if you cannot because it is not near the router, connect it wirelessly.   Then you can disconnect the USB to your desktop and all computers on the network can use it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP OfficeJet 6500 wireless twain driver( for scan to quickbooks) needed

    I have an extra HP OfficeJet 6500 wireless printer around and I wanted to see if it had a twain driver so we could use it to scan to attach directly to QuickBooks.  QuickBooks lists scanners they think would work and it is not on the list but they also state that any twain driver should work.

    Hi mowit,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    Please respond with which Operating System you are running and I will be happy to research this question about the twain drivers.
    Which Windows Operating System am I running?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    I am always happy to help so please respond back at you convenience.
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • How can I print to my HP OfficeJet 6500 Wireless Printer from my iPhone 4S which used to work before AirPrint printers were even available? (running Mac Lion OS, all software and HP sw updates are all performed)

    How can I print to my HP OfficeJet 6500 Wireless Printer from my iPhone 4S which used to work (on prior iPhones) before AirPrint printers were even available? (running Mac Lion OS, all software and HP sw updates are all performed)
    I don't get it, I read one post about why would we have to buy an AirPrint Printer when we have used the "print to a wifi printer" just fine in the past?  Yes I feel that's exactly what's happening to me now too. I want to print from my iPhone and iPad to my WiFi Printer which is also now connected to my Airport Express WiFi network just fine. No problems.

    Very glad you added that bit of information because I see different problems similar to this.  I want to share with them what you did and hopefully you not only fixed your specific problem but you can lend some more advice to others with problems like this. Thanks!
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • How do i print on my hp officejet 6500 wireless from my ipad?

    When i try to print with my ipad via airprinter I get a message "No AirPrinter Printers Found"  I have a HP officejet 6500 Wireless,  what do I need to do?
    This question was solved.
    View Solution.

    Hello,
    Try following the instructions here.
    If that does not help, let me know and I will see what I can do.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How do I print from an iPad 3 Generation to an Officejet 6500 wireless E709n printer

    I am a new iPad user and I have a 3rd Generation iPad and want to print to an Officejet 6500 wireless E709n printer but the iPad does not recognize the printer when I try to print or visa-versa.  I am using a Ubee Modem/Router and don't know what to do. What do I have to do or what do I have to download to make the iPad and HP Printer print.

    tpgarden wrote:
    .... No AirPrint Printers Found. And it won't Print
    Hi,
    Your printer is not in the list therefore no AirPrint available. Your printer does not support ePrint therefore you can use Home & Biz apps. Have you downloaded apps to your iPad yet ? If yes, please try:
    Pressing the iPad home button two times (a list of currently running apps should appear at the bottom of the screen).
    Press and hold the HP ePrint Home & Biz app until it starts to move around.
    Press the red 'X' on the app to end its process.
    Press the iPad home button.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Problem with HP Officejet 6500 Wireless All-in-One Printer - E709n

    I have a HP Officejet 6500 Wireless All-in-One Printer - E709n that keeps going off-line all the time.
    How do I fix this problem?

    What operating system?  If Win 7 64-bit, try this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=mp-89191-1
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I just purchased by MacBook Pro and I need to connect it to my HP officejet 6500 wireless printer, I tried putting the disk from the printer and I was not able to connect the two can you help me.

    I just purchased my Mac Book Pro and I need to connect it to my hp officejet 6500 wireless printer, I tried using the CD that came with the printer and it will not connect

    Very glad you added that bit of information because I see different problems similar to this.  I want to share with them what you did and hopefully you not only fixed your specific problem but you can lend some more advice to others with problems like this. Thanks!
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • IMac OS X 10.9.4 cannot see the scanner on Officejet 6500 Wireless E709n

    Printer works, fax works but does not see scanner.
    When Scan Pro is opened an error message appears "Sorry, scanner could not be initialized"
    Work around is to use Image Capture
    How do I get the HP Scanner to work?
    IMac OS X 10.9.4 wireless connection to Officejet 6500 Wireless E709n

    Same problem with an HP3055 on Ethernet

  • Using HP Officejet 6110 and Officejet 6500 wireless issues

    I have been using an HP Offciejet 6110 printer for a long time with an HP laptop running WINXP. I purchased a new HP laptop running WIN7.  The WIN7 laptop will print to the 6110 in color only and doesn't allow the HP Imagimg Director software to work.
    I recently purchased a new HP Officejet 6500 wireless printer and set that up to run off the HP laptop with WIN7 using the full software install.  That seems to be working OK.
    I then setup theold  XP laptop using only the drivers for the Officejet 6500 so I could still use the Officejet 6110 from that computer and all the scanning and other features of the HP Imageing Director software.   But it appears that the Officejet 6500 drivers have scewed up the Officejet 6110 software drivers on the XP laptop. How do I get this computer back to using the 6110 as normal (which was very useful) but be able to use the 6500 as an optional printer without all the 6500 features?

    Hi dresdenron,
    Thanks for clarifying the issue again. I was a bit confused.
    How is the Officejet 6500 and Officejet 6110 setup on the Windows XP? (USB, Wireless)
    Both models use completely different software. So there shouldn't be any interference even if the full software had been installed for the Officejet 6500. If both printers are connected by a USB cable, then the Officejet 6500 might have taken over the port and therefore causing the scan not to work.
    What happens when you try to scan? (error message)
    Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
    If the issue persists, uninstall and reinstall the Officejet 6110. This way it will be recognized on the new port assigned.
    Uninstalling the Printer Software.
    HP Officejet and PSC Full Feature Software and Driver.
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    The Officejet 6110 is a Windows Update for Windows 7. There is no HP Imaging Director software available to run on Windows 7. Installing the Printer Software in Windows 7 for a USB Cable Connection.
    Please provide in detail the results. If I missed anything, just let me know.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Officejet 6500 Wireless/Curled corner with Ink blotch

    I am printing on 5.83" x 8.27" cardstock in color.  The left hand top corner of nearly every page is turned up with a round ink blotch that smears if you touch it.   I have printed about 100 of these on new color ink cartridges and it is getting worse to the point that nearly every page now has this issue.  I have run the "clean printhead' function on the tools menu but that doesn't help.  Any suggestions?

    Hello blueeyes14,
    Welcome to the HP Support Forums!  I see you are running into some print quality issues when attempting to print on 5.83" x 8.27" card stock to your HP Officejet 6500 Wireless Printer. After taking a look at the Supported Card Sizes, the card stock you are using is not supported. With that being said, there could be a few factors that are causing the issue you are experiencing:
    1. The card stock may be to thick, so the ink is not able to properly dry before it finishes the print causing the blotch and curl. (I understand you may have had successful prints with that cardstock size, that does not mean it is supported)
    2. I notice you have printed 100+ of these, please keep in mind if the printer is running for long periods of time this could cause it to overheat and not work properly.
    Can you please let me know what the weight of the card stock is you are using?
    I will watch for your reply.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Scanning with HP Officejet 6500 Wireless All-in-One Printer - E709n using Windows 7 Pro editition

    I have had this printer for many years and it was fully operational only for the first two years of its link to my computer.  I have uninstalled and reinstalled the software many times with no success.  The Printer/Scan doctor does not solve the problem  and gives an error HP Twain Scan.  The HP Scan Flow Manager also says that software components are missing The printer works fine but the scanner in the solution center always responds with a error code saying installation is incomplete, "reinstall HP Photosmart software that came with the device and try scanning again" .  The extended error information is  4,[2,0,80040154), (0,0,0),(3,56,0)] Another computer, my wife's laptop, running Windows 8 was operational until the end of May 2015, and she is also getting this error code with her computer.  This has got to be the most annoying all-in-one I have ever used.  I have a Canon all in one at work that I have used with the laptop and the all operating features are mindless...it just works.  HP software must have compatibility issues either related to operating systems updates or security software.  My computer uses AVG, the laptop uses McAffee and beither scanner operates with this printer. I need to get this scanner operational!

    Hi , Welcome to the HP Forums! I understand that you cannot scan with your HP Officejet 6500 wireless printer on Windows 7 and 8. I am happy to look into this issue for you!  Some questions for you:  Are you able to make copies with the printer from the scanner glass? Loading and Copying 216 x 279 mm (8.5 x 11 inch) Plain Paper. (This way we can verify that the hardware is functional.)Do you see any error messages on the printer's display screen, or blinking lights?  In the meantime, please take a look through this scanning guide, An 'HP Cue Scanning Flow component has encountered a problem and needs to be closed' Error Displays for HP Deskjet, Officejet, and Photosmart All-in-Ones. Hope to hear from you soon!  “Please click the Thumbs up icon below to thank me for responding.”

  • HP officejet 6500 wireless suddenly stopped printing black ink.

    HP Officejet 6500 wireless has stopped printing black ink.  Followed all troubleshooting steps to no avail. Prints colors but black is either very faint or not present

    Welcome to the forums Irgoodspeed
    I saw your post about your Oj 6500 Wireless no longer printing in black ink. I noticed you have already changed the cartridge which did not help.
    I would recommend following this troubleshooting guide:
    Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
    Have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Maybe you are looking for

  • MS Access 2010 and TFS problem when I try to "create form team foundaition"

    I am using MS Access 2010 and trying to use TFS for source control. I installed MSSCCI for 2010 and the "Access Developer Extensions" I am able to create a project in TFS and check in and check out access objects. My only problem is when I click on "

  • Unzip zip

    Hi all, I am trying to unzip in sender CC and Zip at Receiver CC. I am using AF_Modules/PayLoadZipBean at both sender and receiver cc's I am getting the error below Attempt to process file failed with com.sap.engine.services.jndi.persistent.exception

  • Moving playlists between hard drives

    I recently bought an external hard drive for my music. Moving the music was fine, but I lost ALL of my playlists! I see from the forums that this happens a lot - is there any way to get them back without entering them manually? Thank you!

  • Why is Firefox suddenly blank - no address, search or tool bars, uninstall/reinstall d/n resolve--now only v 3.6 will work?

    I was using the latest version of FF and last week the browser froze and when I restarted it was completely blank. I went through the help section, tried uninstalling, manually removing files, and reinstalling several different versions, but the only

  • Focus peaking indicator in After Effects?

    Does anybody know if After Effects has some kind of focus peaking indicator? It's basically a way for me to tell which part of the scene is the sharpest if I have a 3D camera with DOF enabled... similar to what professional video cameras have built i