HP Officejet 6500A How do I scan a document with multiple pages into one file?

HP Officejet 6500A Plus e-All-in-One Printer - E710n
Windows 7 (64 bit)
How do I scan a document with multiple pages into one file?  My old printer (psc 2110) asked after each scan if I wanted to scan another page.  At the end I had one pdf file with multiple pages.
This new one creates one file for each page and I cannot find a way to create one pdf file with multiple pages.
This question was solved.
View Solution.

Hi mpw101,
If you load the papers into the ADF - Automatic Document Feeder, and then select Document to PDF then they will all be scanning into one file. Let me know if this works for you?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • How do I scan a document with multiple pages _ HP 6500 wireless

    I tried this in another thread but never got an answer, so here it goes again. I have a problem trying to scan multiple pages FROM THE GLASS into one pdf file. I have the HP Officejet 6500 wireless E709n printer running under WIN7 64-bit. My printer has the HP Document Manager software version 2.0.  How do I set that up to do multiple page from the glass into a single pdf file. I was able to do this easily with my older HP Officejet 6110 printer but the HP software on that was HP Director.   Any help will be appreciated.

    Jabzi, Clicked on the link and it takes me to a page that says to use HP software that I have to be using HP Solutions Center software that came with the HP printer. I have a HP Laptop G7-2022 that came with WIN7 and the HP 6500 wireless printer and there are several listings on the HP programs drop down menu, but no HP Solutions Center. It has HP Document Manager,  HP Photosmart, Officejet 6500, etc but no Solutions Center. So I take it then from your answer that HP Document Manager can scan multiple pages from the ADF into one pdf file but can't do the same thing from the glass, correct?  Where do I get HP Solutions Center software since it didn't come with the HP laptop or HP printer?  

  • Scanning multiple pages into one file using MAC

    How do I scan multiple pages and save them into one file or document using a MacBook Pro laptop?  My printer is an HP Photosmart 7520.  When I use this printer and scan from my PC, it does allow me to scan multiple copies and save as one document by just adding pages as I scan.  When I scan with my MacBook Pro, it scans each page, however, I don't get any option or choice to save as one document.  It automatically saves each page as a separate document.

    Try scanning from your Mac. Use Image Capture app in your Applications folder.
    Click once on the scanner on the left side, then click on Show Details along the bottom. Along the right side you will see LOTS of options for scanning and saving.
    One of those is Format, make the Format PDF.  Just below that will be a check box allowing you to scan multiple pages to one file.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Scanning multiple pages into one file

    I am scanning several pages that need to be in one file so that I can email that file. My printer has a flatbed where you can place only one page to be scanned at a time. A friend of mine said that it should ask if I want to scan another page but it doesn't.  It simple imports it to "My scans."  There are too many pages to try to email one at a time. I need it in one file. Can anyone help?

    NGB2008
    Welcome to the HP Community Forum.
    Are you talking about PDF files?
    If yes:
    Suggested by our Povost Expert banhien
    PDFSAM – Split and Merge PDF documents – Free, open source, platform independent
    See the Page:
    Merge pdf
    ==================================================​=========
    Further Reference - may not be relevant; you did say your Software / printer does not support combining PDF files using the Full Feature Software:
    Scan_Multiple_Documents-Combine
    Click the Kudos Thumbs-Up to say Thank You!
    And...Click Accept as Solution when my Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • How to scan multiple pages in one file

    I would like to know how to scan multiple pages into one file.  There is no add button that comes up.  I have a HP Officejet 8600 and a macbook pro.  Please help, this would really help me out.

    Open Preview and use its "Import From Scanner" option in the File menu. This will launch the scanning interface, which has some standard and basic scanning controls. If you choose "PDF" as the file format to save as, then you will see an option to scan all images to one file. When you do this, you will scan and edit them individually, but Preview will save them to the same file when saved.

  • Scanning multiple pages into one document with an automatic document feeder

    when using automatic document feeder to scan in multiple pages - using the Image Capture app, this process does not work for more than 2 pages. However works perfectly in PC environment.
    Using a MacBook Pro with 10.8.4 and a Lexmark Interpret 405S All In One Scanner.
    Is there any other all in one device that can perform this function in a Mac environment?
    Please advise.

    Hi @FentyFly ,
    I see by your post that you would like to know how to scan multiple pages into one file. I would like to help you out today.
    From the HP Scan Software, click on the link for Advanced Settings, then uncheck Create a separate file for each scanned page.
    Here is a URL for how to scan and change the settings. Just select your operating system.
    Scan.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Scanning multiple pages to one file

    I have a C310a All in One printer/scanner.  My computer uses OS X 10.9 and all the drivers are updated.  Is there a way to scan multiple pages to one file.  I have tried the three methods mentioned in the HP bulletin for Mavericks but I can only scan one page to one file extension.

    Welcome to the forums @BPGeneva ,
    I understand you are looking to do a multiple page scan and save it as one file. I will do my best to help! The full driver for the C310a is not available with Mavericks. In having said that,  you can try using Image Capture to scan multi-page documents.
    Click this link and have a look at PrintDoc's suggestion: Re: Scanning multiple pages into one file using MAC
    I hope that helps
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How can I scan multiple pages to one file with MG 7120

    My printer does not have ADF. How can I scan multiple pages to one file on my MG 7120?

    Hi albabynyr,
    There is a program that comes with the printer called the IJ Scan Utility that can assist you with scanning multiple pages into a single file.  To scan using the IJ Scan Utility, please follow these steps:
    1. Start IJ Scan Utility by going to your Start menu, then selecting All Programs, then Canon Utilities, then  IJ Scan Utility (folder), then IJ Scan Utility (program).
    2. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
    3. Click the DOCUMENT SCAN option on the left pane of the window.
    4. In the right pane of the window, locate the SELECT SOURCE field and select the DOCUMENT option.
    5. Set the color mode, document size, and scanning resolution as required in the rest of the fields shown in the window. Click DOCUMENT SCAN ORIENTATION SETTINGS... to specify the orientation of the documents to be scanned.
    6. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
    a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
    b.) In the DATA FORMAT field, use the drop-down arrow to select the PDF (Multiple Pages) option.
    c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the DOCUMENTS folder.
    7. Once all settings have been selected, click the OK button at the bottom of the SETTINGS (DOCUMENT SCAN) window. The IJ Scan Utility main screen appears.
    8. Click the DOCUMENT button. Scanning starts. After a page has scanned, the screen to continue or end scanning appears. If you have more pages to scan, place the next page on the platen and click Scan.  Do this each time a page has completed scanning.  After the last page has been scanned, click Exit. Scanned images are saved in previously selected folder location specified in the SETTINGS... window. Click the CANCEL button to cancel scanning if needed during scanning.
    Hope this helps!
    This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How do I scan multiple pages into one document?

    How do I scan multiple pages into one document?
    HP Photosmart 5514-e-All-in-One Printer B111h
    Model CQ 183 A

    Hi,
    Have you tried this (using PDF format).
    Launch the scan from the HP Solution Center
    Click Change Settings.
    Select the desire Scan Shortcut, then click Save to file save options
    Make sure Create One File per scanned page... is Unchecked, Approve and perform the Scan.
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do i scan multiple pages into one pdf file

    How do I scan multiple pages into one pdf file?

    That depends on your scanning software. Adobe Reader doesn't scan.

  • How do I scan multiple pages into one document using the CanoScan LiDE 200?

    How do I scan multiple pages into one document using the CanoScan LiDE 200?
    I can't seem to find a way to get them to scan continuously, or a way to stitch them together afterwards.

    Hi dagda24,
    You can scan multiple pages into a single document with the scan to PDF option.  Use the following steps to do so:
    1.  Open MP Navigator.
    2.  Click One Clcik.
    3.  Click Save to PC.
    4.  Change the File Type from PDF to PDF (multiple pages).
    5.  Make any other changes as needed, then click scan.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How do I scan multiple pages into one pdf document on a HP Envy 4501 Printer

    My HP Envy 4501 Printer won't let me scan multiple pages into one pdf document.
    I went to "Advanced Settings", clicked on "file" and made sure that the check box next to "Create a separate file for each scanner page" was unchecked.
    When I clicked the Save button it showed the page that I scanned and showed 1/1.  On the right side it had options for changing the brightness and Contrast, Rotate and Crop and "Back", "Save" and "Done" buttons, but nothing about scanning another page.
    Not to mention HP's Customer Support is useless!
    I'd appreciate any help I can get with this problem.
    Thanks,
    Mark

    Hi BH,
    I see your diagram.  I just scanned something.  The screen that I'm looking at right now shows the preview page and the scroll box to the left of that just like in your diagram.  The screen does not show the + button nor does it show the red x button under the scroll box as in your diagram.  I can't see the plus sign because it is not there.
    I tried re-installing the software and drivers as you suggested but that did not have any affect.
    Thank you for trying to help me with this problem but it hasn't worked, therefore I can't mark the reply "Accept as Solution".
    I've noticed that on HP's support forum web page there is only 1 solved request for assistance.  That doesn't give me much confidence in HP.
    Please reply back to this post to let me know if there is anything else that I can try or if you know someone else at HP that can help.
    If I don't here back from you, I'm returning this HP Envy 4501 Printer to get my money back to use it to buy a printer from one of HP's competitors.
    Thanks,
    Mark  

  • How do I scan multiple pages into one pdf file using the PIXMA MG7520 on Windows 8.0? Please help!

    I recently received a PIXMA MG7520 for a gift.  It works great with my lenovo laptop/tablet running on Windos 8.0.  The one drawback to the HP all-in-one that it replaced is it does not have an ADF.  That being said, there must be some way to scan multiple pages into one pdf file.  I need help figuring thing out.  Thanks in advance!
    Solved!
    Go to Solution.

    Hi mdtolbert54,
    There is a program that comes with the printer called the IJ Scan Utility that can assist you with scanning multiple pages into a single PDF document.  To do this, please follow these steps:
    1. On your keyboard, press the Windows key.
    2. Start typing IJ SCAN UTILITY. The search window opens as you type. Once the IJ SCAN UTILITY is displayed, please select and open it.
    3. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
    4. Click the DOCUMENT SCAN option on the left pane of the window.
    5. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
    a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
    b.) In the DATA FORMAT field, use the drop-down arrow to select the PDF (Multiple Pages) option. 
    c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the MY DOCUMENTS folder.
    6. Once all settings have been selected, click the OK button at the bottom of the window to save the changes. The IJ Scan Utility main screen appears.
    7. Click the DOCUMENT button. Scanning starts. Click the CANCEL button to cancel scanning if needed. Scanned items are saved in previously selected folder location specified in the SETTINGS... window.
    If you find that you need advanced scanning options such as adjusting resolution, brightness, contrast, saturation, color balance, etc. in addition to the options selected above, please click on the SCANGEAR button on the IJ Scan Utility Main screen, then adjust the items as necessary.
    Once the items above are set for document scanning, in the future, you will only need to launch the IJ Scan Utility, then press the DOCUMENT button to perform the scan (unless you want to make changes to the settings).
    Hope this helps!
    This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How can i create  excel sheet with multiple tabs using utl file?

    how can i create excel sheet with multiple tabs using utl file?
    any one help me?

    Jaggy,
    I gave you the most suitable answer on your own thread yesterday
    Re: How to Generating Excel workbook with multiple worksheets

  • How do I add multiple images into one file?

    I'm sure this is something that's been covered in another post (or even in the help portal) but I think my wording in my search terms are not correct or... I don't know, because I just can't find what I'm looking for.
    I want to know how to add multiple images into one file/one image, both horizontally and/or vertically. To give you an idea of what I mean, check out :
    http://www.best10apps.com/apps/comic-story,531596060.html
    If you scroll down, you'll see a heading entitled : Screenshots of Comic Story. Notice how there's 3 pictures (divided by borders). 2 of those pictures are side by side, and 1 of them is below the first 2 pictures.
    I want to know how to add different pictures/images and put them into one picture.

    One way is to create template PSD files and populate them with your images using Photoshops scripts.
    Photo Collage Toolkit UPDATED June 12, added Picture Package Support via PasteImageRoll and BatchPicturePackage scripts.
    The package includes four simple rules to follow when making Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.
    There are eleven scripts in this package they provide the following functions:
    TestCollageTemplate.jsx - Used to test a Photo Collage Template while you are making it with Photoshop.
    CollageTemplateBuilder.jsx - Can build Templates compatible with this toolkit's scripts.
    LayerToAlphaChan.jsx - Used to convert a Prototype Image Layer stack into a template document.
    InteractivePopulateCollage.jsx - Used to interactively populate Any Photo Collage template. Offers most user control inserting pictures and text.
    ReplaceCollageImage.jsx - use to replace a populated collage image Smart Object layer with an other image correctly resized and positioned.
    ChangeTextSize.jsx - This script can be used to change Image stamps text size when the size used by the populating did not work well.
    PopulateCollageTemplate.jsx - Used to Automatically populate a Photo Collage template and leave the populated copy open in Photoshop.
    BatchOneImageCollage.jsx - Used to Automatically Batch Populate Collage templates that only have one image inserted. The Collage or Image may be stamped with text.
    BatchMultiImageCollage.jsx - Used to Automatically Batch Populate Any Photo Collage template with images in a source image folder. Easier to use than the interactive script. Saved collages can be tweaked.
    BatchPicturePackage.jsx - Used to Automatically Batch Populate Any Photo Collage template with an image in a source image folder
    PasteImageRoll.jsx - Paste Images into a document to be print on roll paper.
    Documentation and Examples

Maybe you are looking for