HP Officejet 6700 Premium: eprint works; connection with printer cable doesn't

Just bought a new Officejet 6700 Premium. I had the same model before. Setup worked well and eprint functions. But with the last Officejet I had, I could also connect it with a printer cable and then I could print directly without having to send an email. I find this useful, because there is not so much waste of paper and ink on pages I don't need (sometimes I only want to print one page from a series of several pages or I want to print something directly from the internet). With the new model I have connected the printer and my computer with the printer cable, but I cannot print with the option of, for example, "print this page", but always have to make a pdf and then attach this to an email and send it to hpeprint. Can someone tell me what I have to do in order to be able to print directly with the printer cable? Thank you in advance!

Welcome to the forums, @Sunshine888
I read your post about how you can ePrint successfully, however you cannot print from your computer. I would like to help you with this! To find the best troubleshooting steps for you, I would need to know which operating system you are running on your computer and also let me know how you wish to connect your printer to your computer (USB, Ethernet or wireless).
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Hope to hear from you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

HP Officejet 6700 premium no longer connecting to the computer

My HP officejet 6700 will no longer communicate with my dell (windows vista) lap top. Both are connected to the internet and have good wireless signals. I recently printed from this computer to this printer wirlessly and nothing has been altered, downloaded, ect since that last print job. The lack of connection between the two devices is new.
Any help or insight would be much appricaited.
Also, I've checked for updates and I had to use the disk to instal the software ( for whatever reason, the internet download would not work).

Hi @brit24 , and welcome to the HP Forums!
I see you're running into connectivity issues. I would like to help!
I would recommend downloading and running the HP Print and Scan Doctor.
I would also suggest utilizing this document on Wireless printing center Troubleshooting Issues.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

I have a brand new hp officejet 6700 premium e-all-in-one printer but my macbook pro is not detecting the printer to even install it or make a print can some one tell me if it is a problem with the printer or the macbook pro?

can some one help me with the question ..

no not at all..it was just tested if it was being detected on a windows os..it did..i am doubting either it is a problem with the router or the macbook pro....but earlier it did connect well to a hp officejet pro 8600 e-all-in-one printer over a different network(at someone else's house)...

Hp officejet 6700 premium e-all-in-one printer - h711n and mac 10.8.3

Apparently this printer cannot be installed in a mac higher than 10.7.
I couldn't find a driver for a mac 10.8.3. Could someone help me find it or what other option do I have
This question was solved.
View Solution.

Good day!
You can find the MAC driver from below link:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-107209-1&cc=us&dlc=&lc=en&o...
Although I am an HP employee, I am speaking for myself and not for HP.
Say "Thanks" by clicking the thumbs up in the post that helped you.

Officejet 6700 error while searching for updates: 'Printer could not connect to server'

I recently purchase the Officejet 6700 Premium. While setting the printer up, I received the error 'The printer could not connect to the server.' I first received this while the printer was searching for updates. I later received the same error while trying to set up ePrint from my computer.
The printer is connected through my wireless router. All other print services function normally. It is connected to the network, and I have printed several times over the wireless network.
Though I don't think it matters, since the on-board print set-up gave me the error, I run Windows 7 64-bit on my computer.
Thanks for any help!

What is the IP address of the printer? What is the make and model of the router that you use in the wireless set up? Is the router firmware up to date?
I would first try power cycling the router and the printer. Turn off/unplug the router and then power down the printer. Then plug the router back in and wait for it to be fully up and functioning before turning the printer back on. After you have both pieces of equipment back on and functioning attempt to connect to web services again.
If still having problems I would attempt to set a static DNS on the printer through the embedded web server (EWS) by entering the printer's IP address into the address bar of a browser on a computer.
Once that computer displays that page click on the Network tab.
Then look in the column to the left and find the Wireless section
Click on IPv4
Then on that page look at the 2nd section that is labeled DNS Address configuration
Change the radio button to the manual option
Then for the manual preferred fill it out and make sure it reads 8.8.8.8
Secondary should be set to 8.8.4.4
Then hit Apply
Read the next screen carefully. That message with the "OK" button below it is one that states to click that button to undo the changes you just made. Just navigate away from that page by clicking on another tab.
Then reattempt to connect to web services.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Is there a workaround for Officejet 6700 Premium for MacBook Air version 10.10

Is there are a workaround for compatibility issue between OfficeJet 6700 Premium with MacBook Air OS X 10.10 Yosemite?

Welcome to the forums @Bron15
I read your post about wanting a work around for your Officejet 6700 to be used on 10.10.
There is a Full Feature driver available for you to install on Yosemite, therefore it's fully compatible. Download the driver below. If there are any issues, please let me know what exactly the problems are.
HP Officejet 6700 Premium e-All-in-One Printer series - H711 Full Feature Software and Driver
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet 6700 Premium Not connected for eprint

Good evening,
I bought a officejet 6700 Premium and I installed it 10 days ago, The printers worked properly for a couple of days.
Now, if I log on in ePrintcentre, a message says that the printer is not connected.
If I launch a print using the wireless net (e.g using my IPHONE while I'm at home and using my home wireless) it works.
But if I launch a print @ my HPe address the printer doesn't work and remains in pending message (on eprint centre) for a while and then become "failed".
Is there something to set in the printer panel?
Thank you very much

Hi Antonio,
I would check if the printer has the latest firmware. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02919168&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Then, turn the printer off for about 20 seconds, then power it on again. When it's back at the home screen, print an info sheet to check your eprint connection. Front panel of printer>eprint icon>print info
This next step will require you to delete your failed print jobs: (steps from http://www8.hp.com/ca/en/support-topics/mobile-printing/mobile-print-help-iphone-ipad.html)
Click the tab at the top of the page with the name of your printer.
In the Recent Print Jobs section, click View Job History.
Click Cancel next to any print jobs that you want to clear from the queue. (Try printing again)
***If those steps fail, you'll have to call the HP Eprint support line @ 1-855-785-2777
Good luck
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

Scan-to-email app with Officejet 6700 Premium printer

how to scan and email
Scan-to-email app with Officejet 6700 Premium printer - attachment does not come through

Hi
Welcome to the HP Support Forums. I see that you are unable to use the scan to email feature of your Officejet 6700 printer because you are getting an unable to connect message.
There are several steps I would like you to try please.
Please turn off your printer.
Please turn off your router. If your router doesn’t have an on/off switch, please unplug the power cord from the router.
After waiting a full 60 seconds please turn on your router (or plug it back in).
After the router has completed its startup routine please turn on your printer.
After the printer has completed its startup routine, please test the scan to email feature. If it works there no need to continue with any further trouble shooting steps.
Please set a manual IP address and manual DNS servers for the printer. I have included a link to another post with the steps, including screen shots on how to do this. Don’t worry that the screen shots show a Officejet 8600 printer, the steps are the same.
Please test the scan to email feature. If it works there is no need to continue with any further trouble shooting steps.
Please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP Officejet 6700 Premium cannot connect to wifi network

Since a few days, our HP Officejet 6700 Premium can no longer connect to wifi network. All our other devices as laptops, smartphones, tablets have no difficulty in connecting to the wifi. reconnecting and entering the WPA password doesn't help.
The printer says the SSID of our wifi network is not unique, it detects multiple access points.
What can I do to solve this issue.
Tx

Hello there @karatejan
Welcome to the HP Forums!
I read about the issues you're facing when trying to connect your Officejet 6700 printer to your network recently. I have three suggestions for you, and please let me know the results when you are done.
Try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer, and run the set up again.
If you are running a Windows OS, from your PC, perform a Clean Boot, which will turn off the start up programs just in case there is something blocking the installation. Try the USB to wireless set up again.
Check your router settings to match these recommended settings:
1. Network name and password to have no spaces or punctuation.
2. If using WPA2 security, switch to WPA personal.
3. Dual broadcast Wireless b/g/n (printer may only connect to g).
4. Mac filter needs to be turned off.
5. Firewall settings need to be at there default settings, or set to a lower security.
6. Multicasting "on".
7. Following ports need to be un-blocked:
Incoming (UDP) ports : 137, 138, 161, 427
Outgoing (TCP) ports : 137, 139, 427, 9100, 9220, 9500
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP OFFICEJET 6700 PREMIUM ALL IN ONE PRINTER - FAX WON'T WORK

Question: how do i make fax work voice over IP?

Hello Cabin1958,
Welcome to the HP Forums!
I understand you would like to make the fax work with voice over IP using the Officejet 6700 premium. I will do my best to assist you! I would recommend following this entire HP document on Faxing with VoIP Services.
Please post your results, as I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

Scanning with an Officejet 6700 Premium

Hi!
I'm having trouble scanning documents.
My laptop is a MacBook Pro running OS X 10.10.1 (Yosemite).
The printer is an Officejet 6700 Premium e-All-in-One. It is connented via WiFi -- the Printers & Scanners section of System Preferences lists it as HP Officejet 6700-AirPrint.
I *can* print documents, so the setup is not entirely messed up...
The printer makes copies, so the scanning hardware must be OK.
I downloaded and installed fresh drivers from the HP website.
I *can* scan documents by going to the printer's webpage, then to Scan > Webscan. This only works in Firefox, not in Chrome, and doesn't give me the option to select the are I'd like to scan. It's rather inconvenient.
What *doesn't* work:
-Webscan in the Chrome browser: the scanner makes some noise but I can't save the result.
-In Preview, File > Import from Scanner... is disabled. This used to work and was very convenient, but then broke somehow.
-HP Scan. It says "Preparing to scan..." for a couple of seconds then pops up an error message: "Scanner reported an error. HP Officejet 6700 is currently unavailable. Please check if it is turned on and connected, or try again later."
-"Scan to computer" from the printer. A popup appears on my computer screen:
"Scan failed. The operation couldn’t be completed. (com.hp.scanhandler.error error 2.)"
Any help would be greatly appreciated! It would be wonderful if we could get Preview's Import from Scanner... function to work.
Thanks,
b

Ha!
I fixed it.
Here's what I did:
-Run HP Uninstaller to remove... everything?
-Reboot the laptop.
-Do a factory reset on the printer, then re-enter the WiFi password.
-Download the driver (is that what it is?) from hp.com/support. I noticed that the file is called "HP Inkjet SW OSX Mavericks.pkg" even though my OS is called Yosemite.
-Install that, following all prompts. When I added the printer I picked"HP Officejet 6700" rather than "AirPrint" for"Use:"even though AirPrint would have been the default and the choice of "Auto Select". See attached screenshot.
-Go to Preview, menu File > Import from HP Officejet 6700... and test. Success!
Of course I don't know which of these things made the difference, but it worked for me.
Cheers,
b

HP Officejet 6700 Premium double sided printing with Word

I have a new HP Officejet 6700 Premium printer. When printing a pdf the double sided printing option works. When printing from Word, it does not. Can you tell me what settings I need to change to make this happen?

Hi,
From Word click on File and then select Print. the print dialog appears.
Click the Printer Properties link. the Printing Preferences dialog appears.
Within the Layout tab, set the Print on both sides option as Flip on long edge.
Click OK to confirm the changes, than click the Print button.
Please let me know if that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Officejet 6700 Premium printer connectivity problems

My HP Officejet 6700 Premium printer is not connecting properly wirelessly. On the printer itself it says it is connected to my wireless network but when I try to print an error message says it is not connected and is it currently on ly printing when it is connected by cable. Please advise. Thank you

My printer will not print . having connectivity problems.

Not recognizing HP OfficeJet 6700 Premium for Scanning

Hi to all,
I bought and set up an HP OfficeJet 6700 Premium. It is working fine for printing. However it won't recognize the HP Office Jet for scanning. Attempted both from device and from PC. I get a message that device was "not found"...I am running Windows 7.1
The manual says this below:
If your printer is connected to a network and you are scanning to a Windows
computer, before you can scan from the control panel, you need to enable scanning
from the software. From the computer desktop, click Start, select Programs or All
Programs, select the folder for your HP printer, and then select the option for your
HP printer. Double-click Scanner Actions, double-click Manage Scan to
Computer, and then click Enable.
I see the HP printer from the Programs menu, but I cannot get to the instruction - Scanner Actions.
Please help.
Thank you.

Hi ColleenM,
I am sorry to hear you are having such difficulty scanning. The HP Print and Scan Doctor (PSDR) was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
On an unrelated note, there was a firmware update released for the Officejet 6700 that you may or may not need. This firmware update likely has nothing to so with the issue you are experiencing but I would like to take the opportunity to let you know about it. Having the newest update does the following:
Fix/Enhancement
1) Enhance ePrint Diagnostic report for ePrint Setup.
2) Improve ease of wireless setup.
3) Enhanced Embedded Web Services.
4) Improve Print Quality.
5) Improve Airport Express connectivity.
6) Improve the accuracy & reliability of ink level gauge.
7) Improve ADF pick performance.
8) Improved paper handling
To check the version of your current printer firmware:
Printer Information Screen
1. From the Control panel, press Help (?) button, select Printer Information
2. Use the down arrow button to scroll to the 2nd screen
3. The current firmware revision will appear on the screen
If you do not have Version MPM3CN1322DR you need the update.
HP Officejet 6700 Premium e-All-in-One Firmware.
Let me know what happens with the PSDR. If the issue persists let me know, I am eager to help you resolve this.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

OfficeJet 6700 Premium Problems after Windows 8.1 update

My Officejet 6700 Premium worked great wirelessly under Windows 7 to print & Scan. Since updating to Windows 8.1, I can print to the printer wirelessly (having set it up manually from the printer), but the software won't load and I can't scan. Setting up a network connection using downloaded HP software fails (it just says it failed, no error message), and trying to download the entire software package (which includes scan, which I need), also fails during step 1 of 4. I tried uninstalling all HP software first, but the same errors persist. I don't want to mess things up further (as I said, I'm able to print wirelessly now), but I really want to be able to scan to the computer. Any help would be appreciated.

Hello mfrank1,
Welcome to the HP Forums.
I see that you are having some printing issues since you upgraded to Windows 8.1.
I do have a few troubleshooting steps that we can try to resolve this issue.
I first suggest that we uninstall the old software and drivers. I realize that you have already attempted to do this but I still would like to try it again but this time using the following document: Uninstalling the Printer Software.
When you stated that you have the printer connected with a direct connection using wireless, is this with a Bluetooth connection? Do you have a Router that you are going through?
Once the software is uninstalled, please restart the computer. Please disable any firewalls or anti virus protection before starting the next step.
When the computer is back up and running, please click on the following link for the HP Officejet Full Feature Software and Driver.
Please save the download to the Desktop of the computer so that it creates it's own Icon. Double click on the new Icon and follow the instructions.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thank you for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP Officejet 6700 Premium: eprint works; connection with printer cable doesn't

Similar Messages

Maybe you are looking for