HP OFFICEJET 7110 CUSTOM-SIZE PAPER

I have two questions....
1- I want to print in a custom-sized paper that have the same A3 paper width.... but an AO paper length (29,7cm 1,18cm) .., and I can't add any kind of custom sized paper... is ther any way I can do that?
2- I read that the software for custom sized paper is only available por mac OS X, why!???, please make it possible for Windows!
thanks!

Hello there, Welcome to the Forums! I hope you enjoy your experience
I saw your post about trying to print on a custom paper size. Below is a link to the printer specifications for your Officejet 7110. Please check the specs to see if the printer supports the size you are trying to use.
The second link below is instructions on how to add an alternate print driver that might give you the option to print in custom sizes. I suggest trying it out to see if that helps!
Product Specifications - Paper specifications
How to Assign Alternate Print Drivers in Different Versions of Windows
Best wishes,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

How can I custom size photo paper to 11" x 14" in PSE 11?

I have a Canon PRO-10 printer. I made the custom size change to 11 x 14 in the driver's printer properties, but it does not show up as a choice when I open the dropdown in PSE 11. Is there no way to use custom size paper in PSE 11? What am I doing wrong?

I don't have PSEv.11, in v.8 I do the following ---I doubt that they have changed this:
In full Editor, go to File>print
In the dialog that comes up, #3Paper size, from drop-down select Custom size
Next, #5 Print size select Custom in drop-down
This opens the "More Options" dialog>custom Print size tab. Here you can enter the dimensions.
There is also a "More Options" label one can click towards the bottom left in the print dialog - same thing, just different way to get there
Note: It's best to crop to specification prior to sending to the printer. In your hypothetical, crop to 11x14.
This way you are in control, not the printer.

Problem printing custom size 3.5 in x 5 in from InDesign to Canon i9900

I am working on a small project where I need to print a custom size. The cards are 3.5 in x 5 in. I set up a custom size of paper in InDesign CS3, but every time I print to my Canon i9900, I get only a small bit of the design in the upper left hand corner as if my paper size is set to 8.5 x 11. I have tried everything to get it to print correctly. Also, how do I set the paper for borderless printing? It seems that it still has a margin when my printer prints borderless. This seems like if would be elementary to me so I am a bit frustrated that I can't figure it out.

My experience is with CS2 on OS 10.3.9 and 10.4.11, so this may have changed in CS3, or 10.5....
Setup a custom paper size for your printer.
This can be accessed from within the InDesign Print window.
File > Print
Select your printer from the
Printer: pulldown menu (if not already selected)
Click
Page Setup... at the bottom left
Click
Settings and then select
Custom Paper Size from the list of options
Click
New, name the style, define the paper size and printable margins, and save it.
Click OK to exit the page setup.
In the InDesign Print Window, Click on
Page Setup... again
Select
Your New Paper Size in the Page Setup
Paper Size: pulldown, then click OK.
InDesign Print window
Setup should reflect the new page size and list the paper size as "Defined by Driver"
If your document page size is the same as your paper size, then the preview in the lower left should reflect that.
HTH
-mt

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper. I would like to have a custom size to work with a card making program.

Can you help me out?
I have an HP Officejet Pro 8600 N911a
When I try to print to a custom print size (2.75" x 6" in my case), I get the same error everyone else is reporting: "Paper detected does not match paper size or type selected. Make sure the paper size or type is correct to continue the job."
I am currently trying to print using Microsoft Word for Mac 2011 version 14.4.5, but I have the same problem with printing from Adobe Reader 9.8.5 or Preview 8.0.
I am running OS X Yosemite 10.10.
My printer's firmware is "up to date" as of 28-Aug-2014.
This is what I did:
1. Open System Preferences from the Apple menu.
2. Click on the Printers & Scanners icon.
3. Click on the + sign under the list of printers to add a printer
4. Click on IP
5. Enter my IP address in the Address field (verified as "valid and complete host name or address")
6. Ignore Protocol field (default is Line Printer Daemon - LPD)
7. Ignore Queue field (default is blank for default queue)
8. Ignore Name field (default is IP address)
9. Ignore Location field (default is blank)
10. Under the Use dropdown menu, I select "Select Software"
11. HP Deskjet 9800 is not an option.
I searched for 9800, but there is no HP printer with that number in the options.
I tried selecting "HP DeskJet 980C - Gutenprint v5.2.3" to see if that would work, but I received the same error message as above. I tried selecting other random HP printers, but so far I've had no luck.
I've been googling about for a way to manually add a printer driver to this "Select Software" list, but I've found nothing (apparently, no one else wants to do this). I did not find a driver download for the HP DeskJet 9800 for OS X Yosemite 10.10 on the Drivers & Software section of the hp.com website.
Additional details on settings for Microsoft Word for Mac 2011 version 14.4.5:
Selected File > Page Setup from menu
Under the Paper Size drop down menu, I selected manage custom size.
- Click + to add a paper size
- Enter "2.75" in width and "6 in" height in the paper size fields.
- Enter "0 in" as the User Defined Non-Printable Area for top, left, right and bottom.
- Double-clicked Untiled in the custom size list and rename the size as Receipt
- Click OK to return to the Page Setup dialog box
Under Settings: Page Attributes:
- Format for "HP Officejet Pro 8600"
- Paper size: Receipt
- Orientation: "tall/portrait"
- Scale: 100%
- Click OK
Select Format > Document and set all page margins to 0.25"
Thank you.

Printing custom sizes on HP Officejet Pro 8600 Plus from Macbook Pro

I am having trouble setting up a Word Document (Word for Mac 2011) to print in a custom size on my HP Officejet Pro 8600 Plus. I'm using a Macbook Pro running Yosemite.
I would like to print on a card stock that is 4.5 in x 13.5 in. I have tried under Page Setup to create a custom size under Manage Custom sizes, however, I'm hitting a brick wall. The printer gets the job but can not feed the paper. I've also tried to set my default paper size under my System Preferences/Printers and Scanners to be this size...still not working.
Please help!

Hi @klinecard
It is important to ensure the paper size you are selecting is a supported size, and make sure the weight is supported too.
Printer Specifications for the HP Officejet Pro 8600 e-All-in-One Series Printer Series
Please look under paper handling.
If your desired size and weight is supported, you might find the following helpful; Create Custom Paper Sizes in Windows 7, Windows 8, and Mac OS X
Truthfully, since you are not getting an error message, I suspect you have correctly setup the custom size, this issue is most likely the printers inability to feed the paper you are using.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Printing custom size paper

I'm trying to print (via mailmerge from MS Word) name badge stock that is 4" wide and 14" long. When I try to print a file of 12 sheets, the printer takes about a minute between sheets. I've tried to find out why it won't print consecutively and the closest relevant info I've found is that there is some default in the printer causing it to go through some type of recycle. I've entered the custom paper size in the Word paper settings, but this does not solve the problem. I had an older HP laserprinter that worked find cranking out these quickly, but it died. Any ideas how to solve this?

Hi,
Unfortunately the driver that comes with the Officejet 8600 does not have the customer option. Try the workaround I listed below. This is how I was able to print on custom size media on my Officejet 8600. This is not a supported workaround but I do know that it works at least for my unit.
Download the Photosmart C310a software package using the link below
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&product=4231205
Double click the downloaded file and follow the onscreen instructions until you see the window where it is asking you how you want to connect your printer to the computer
Select “Direct Connection using USB” and then Click Next
Place a checkmark on the option “If you were unable to connect…” and then click Next. Follow the on screen instructions to complete the install.
Set your printer drivers to use the C310a driver by following the steps below
Click Start (or Windows Orb) and then Click Control Panel
Click Devices and Printers and then right click on your printer’s icon
Click on Printer Properties and then Click on the Advanced tab
On the drop down menu for Driver, select the Photosmart C310a from the list
Click Apply and then Ok.
Print from your software application
Open the document or photo you would like to print
Click File and then Print (these steps depends on the software you are using)
Click Properties, Click the Features tab, Click the drop down box for Paper size and then Click custom
Enter the dimensions of the media you would like to use. Enter a name for this custom media and then click the Save button. Click OK to continue
Continue to print the photo or document
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem

Hp officejet 7110 wont print on 11 x 17 paper

I just boughht a new computer with Windows 8.1. Set up the Officejet 7110 but cant find an option to print on 11 x 17 paper. There was an option on my old computer to print on Tabloid 11 x 17 paper, but it's not listed on the drop down menu now. Any idea's?
Thanks.

Hi @terribletiger
It is odd that the Tabloid 11 x 17 paper is not listed on the drop down menu. Let's remove the printer from the computer and reinstall it using the Printer Install Wizard.
Step 1 Remove the printer;
Swipe in from the right edge of the screen, tap Settings, and then tap Change PC settings.
(If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, click Settings, and then click Change PC settings.)
Tap or click PC and devices.
If you're removing a wired or network device, tap or click Devices. If you're removing a Bluetooth enabled device, tap or click Bluetooth.
Tap or click the device you want to remove, and then tap or click Remove device or Remove.
- Source
Step 2 Install the printer
Download and run the HP Printer Install Wizard for Windows
The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
Step 3 Check your settings for Tabloid 11 x 17
Step 4 Let me know
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Printing on Custom size paper

I just purchased a HP Photosmart 7515 and I am trying to print on a paper 5 x 6.5 inches. I am doing this document in Word and I have the page set up in word correctly, but when I go to print the printer acts as if I have paper that is letter size (8.5 x 11in). When I go into the printer's properties and try to choose the paper size I get a drop down menu of several sizes, but not an option to do a custom size. Is it even possible to print on a custom sized paper or do I need to return the printer? If you know how to do it please let me know. Thank you.

Hi,
I afraid the printer does not support using a custom paper sizes.
An alternative driver as the C310 is likely to fail as a such is not supported by the firmware.
You may find the printer specification below, as you may see any custom media size paper is not listed as supported within the Paper-handling specifications, I afraid a such is not supported for your printer:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03312222&tmp_track_link=ot_faqs/top_issues/en_u...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How do I do a custom size paper?

I am trying to print my wedding invitations on paper that is 10x6.5 and keep getting an error message from the printer that the paper does not match the selected size. The size I need is not an option and there is not an option for a custom size. Is there any way to create a custom size? I already purchased all of my stationary. Thanks!

There is a workaround.
Install an alternate driver by going to this post, How to Assign Alternate Print Drivers in Different Versions of Windows.
Once that is installed you can do a custom print size, Create Custom Paper Sizes.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Custom Size Paper - Last Resort

I'm using a Mac G4 PowerPC with OS X10.04 with an Epson Stylus Photo 2000P.
I'm trying to use the Page Set-U menu in PhotoShop to print a custom document size 12x12 inches. The printer is capable of printing 13x19 in color. In the Page Set-Up menu I go to custom page size. I set up a new custom size file with the new size thand the margins and name the custom size. It shows up at the left under the customer file name. However, when I go back to Page Set-up and go to Paper size, my new customer size is listed at the bottom of all the Epson established custom-sized paper list, but the file name is in gray, not black, so cannot be selected.
A hint might be that in the user defined area of the custom size window, I cannot get the Epson 2000P printer to show up. The only printer that will show is my Epson 5700i laser printer. The Epson 200P is my default printer in the Printer Setup Utilize window. Of course the 5700i will not print in color nor will it print 12x12. Is there a way I can get my Epson 2000P printer to show up in the user defined area? Maybe that's why my new custom size title does not appear as usable on paper size under the Print Setup.
I talked at length with Epson. After trying all they could, obviously with no success, they said it must be a software issue. I can print all the other various sizes available in the Page listed on the Page Size under the Page Set-Up menu so they show in black, but not the custom size I developed that shows only in gray.
I then called Apple, and was told they no longer support my computer. Thanks a lot Apple. I guess this is now my only option.
Any help would sincerely be appreciated. Thank you very much if you can help me solve this issue.

Hi - I'm not sure which printer you have or which application you're printing from, but your printer likely has a custom paper size setting. In whatever application you're printing from, go into Print, select your printer and then choose Properties. Depending on your printer, there will likely be an option for a customer paper size, where you can specify the size. You might also go into Page Setup in your application and see if there is a customer paper size option in there as well.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Epson R3000 question. My issue is when I print on roll paper which is 13" wide, specifically custom sizes. Anyone else having an issue?

I can't seem to adjust my image size exactly what I want to print on my 13" roll paper. As an example, I have a panoramic photo that I wanted printed at 13" x 23" but the best I could custom size the print was 9" x 23". I didn't get any resolution yellow triangle errors, it just wouldn't let me get to those dimensions I wanted. I'm pretty new to all this so maybe I am doing something wrong. I have tried custom sizes, ICC profiles which I think more just for printing and color control. Any help would be appreciated.
By the way, the Epson R3000 is an awesome wide format printer if anyone was considering it.

I have tried cropping my photos in Aperture to the exact size I would like to print. I adjsuted paper size through custom dimensions, image size is either set to custom or roll paper. In the end it always seems to do whatever it wants. So I am wondering, am I asking Aperture and my printer driver to do something it can't do, therefore it restricts me? I bought this printer so I could print wide format images but they are too narrow. I don't want a 9" x23" image. I want a 13" by 27" image.
My other question is, I am shooting with a Nikon D90 12.6MP DSLR in RAW mode. Yet, when I try to get something to print like 13x24, I get the yellow triangle resolution error in Aperture. Apparently, the resolution isn't high enough, but it seems weird because my camera is taking inceredibly high resolution photos.

Custom size paper source

Hi All
I have a custom size paper source (name : prinltlabel), is there any trigger or property where I can mention custom size paper source name so that User does not need to select each time.
Thank you

Have you tried to disable the photo tray option in the Printer Properties?

Officejet 4500 won't print Custom Size

Printer Preferences accepts 5.5x8.5 (half an 8.5x11 sheet) custom size In WinXP Control Panel/Printer. I also put this into MS Word 2003. But when I go to print the final Print Preview shows 8.5x11 size. Going back to MS Word/Print/Preferences to re-input paper I choose CUSTOM , Plain Paper, 5.5x8.5 inches, landscape but the box does not do anything. That is - after putting in the values the NEXT button does not activate. Only Cancel works. Help says that the HP Printer Preferences entered in Control Panel should work fine - and that MS Word page setup should over ride the HP settings. Doesn't. The only thing I can do is select 5x8 Index Card as paper type in HP - which is close but not exact. OR , I have to create my work using half of an 8.5x11 sheet but letting HP think I am using the whole sheet. There is nothing on the bottom half so it works. But this is a royal pain.
This works just fine using my Brother's Laser printer and my Canon Inkjet printer - on both MS Word 2003 and Lotus Word Pro. Any ideas would be appreciated. I tried getting the latest driver but install says I already have the latest.

OK, great, thanks for that.
How are you starting the print job? Are you using the print icon on the Yahoo page or File > Print or the print icon in IE8? Do you get different results from these three paths? Do you get any error messages?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Officejet 7110 Wide Format Printer not printing true black on HP Semi Glossy A4 paper

I recently bought an HP Officejet 7110 Wide Format Printer and I have tried several times to print black on HP Semi Glossy A4 paper C6818A and each time it comes out as an almost dark brown off-black. I have tested it with another HP printer and it printed a perfect dark black from the same file using standard printer settings for plain paper. I have just replaced the printer cartridges supplied with the printer with some new ones and this has not fixed the problem either. If you could suggest any possible solutions I would appreciate it. Thanks

Hi , I see that you are experiencing issues with the printer printing the black in a dark brown, using HP Semi Glossy A4 paper, you have already changed the cartridges with the same results. I would like to help you with this issue. I have provided a document with some steps to try to see if that will resolve the issue.Fixing Print Quality Problems for the HP Officejet 7110 Wide Format ePrinter Series. Try printing from another application to see if you have the same results. What applications have you tried to print from? Check the print driver settings to make sure the paper type and quality is set properly.Changing Print Settings in Windows 8. Here is another document to troubleshoot the cartridge if it isn't software related.Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Officejet 7110 Wide Format ePrinter Series. What operating system are you using? How to Find the Windows Edition and Version on Your Computer. If you need further assistance, just let me know. Have a nice day!
Thank You.

Help! Pages Custom Sizes defaults back to normal paper size

I've selected any printer and this usually allows me to create any size, but today it won't play. It just goes back to A4.
Please help

I've had that happen when I tried to create a small custom size and the default document margins were so large that there wasn't any useable area inside them. If I set the document margins to a small value before I created the custom size, it worked.
That may not be what's happening in your case, but you haven't given much information.

HP OFFICEJET 7110 CUSTOM-SIZ​E PAPER

Similar Messages

Maybe you are looking for

HP OFFICEJET 7110 CUSTOM-SIZE PAPER