HP OfficeJet 8000 duplex problem.

HP OfficeJet 8000 duplex problem. Everything after page 7 prints upside down

So all pages after the 7th page have one side correct and the other side flipped? This sounds like an issue in the print driver for this printer.
Have you tried uninstalling the printer and re-installing to see if the problem is corrected?
As well, you may want to try using an alternate driver, such as the 990c driver, to see if it is a driver conflict issue. For information on how to use an alternate driver see Shane_R's thread, found here.
Let me know how it goes.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Similar Messages

Officejet 8000 issues

Guys,
Have just bought an Officejet 8000 wireless. I have successfully installed it as a network printer using the corporate basic print driver - After trying the one on the CD first.
The problem that I'm having is that in some programs it will not print and others it takes a long long time to do so. For example in Word, you send a print job to it and it'll sit there in the print queue saying spooling. Also, if it was not your default printer and you went in to File>Print and attempt to change it to that printer it sits there for ages.
I've tried it wired and wireless and nothing seems to do it... I've not tried it via USB as that is not what we require it to be.
Any help would be much appreciated!
Cheers,
Ash.

You really want to use the Full Featured software for wireless printing. You can choose English only to cut down on the size. I don' know what OS you are using or I would point you right there.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Color LaserJet CM2320fxi MFP - Full Duplex Problem

Hello!
I've got LaserJet CM232 and Win7 (x64). My problem is that when I'm printing for example 4 pages of a document it's printing only in full duplex, so 2 pages printed on both sides. I can't find where can I fix this duplex problem, I'd like to choose manually if it will be printing in full duplex or not. Help me find a solution, please.
Second problem refers to the time of printing. When I print something I have to wait several minutes to print it. Is that a RAM problem? More RAM memory will resolve this problem?
Thanks a lot for your replies! I'd really appreciate any help!
Best regards,
Kuba
Sorry for my English.

Hi Leela,
You may get the details from below HP link
http://h22168.www2.hp.com/us/en/partners/sap/drivers-for-sap-printing.aspx
HP Color LaserJet CM2320n
4.5A & higher
ZHPLJCM1
Hope this helps.
Regards,
Deepak Kori

OfficeJet 4500 and Problem with Launching Windows Explorer (XP OS)

I installed HP OfficeJet 4500 wireless printer with XP operating system on my desktop PC in Wireless mode. Printing works fine from desktop and wireless laptops. However, when I try to access Windows Explorer on my desktop PC, using the desktop shortcut or executable file name in the "Run" menu, the screen flashes, goes blank (blue screen) then refreshes the desktop but will not launch Windows Explorer. This also occurs when I go to My Computer or Network Places and select "My Documents" or click on the root of the C: drive. The only way I can access my files is to use the actual program they were created in (i.e., Word, Excel, Adobe, etc.) I used System Restore and restored my computer to a date prior to installing the printer and this solved the problem. When I reinstalled the HP OfficeJet printer, the problem recurred, so it is definitely associated with installing the printer. Anyone have a fix for this? Thanks for your help.

Hi,
I haven't seen that issue specifically. I would download and run the HP Printer Diagnostic Utility. There might be some file conflicts during the installation that are not resolved that this utility might fix. I have a C309a AiO that had some other issue that the Diagnostic utility fixed.
Print Diagnostic Utility
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

OfficeJet 8000 not showing up in terminal services connections

I have recently been struggling with officejet 8000 creation/deletion on 2k3 terminal services. Looking through the event log, it shows that these printers are created, and then immediately deleted... I was able to map one of the printers to the server, but that's because it's on a local network. The remote users won't have that capability. The machines in question are windows 7.
Thanks

You would actually reset your password from the recovery partition. Reboot using cmd-R, go to the Terminal in the Utilities menu, type resetpassword and proceed.
Matt

Officejet 8000 - Printer says out of ink even after installing new ink cart. and new head.

My Officejet 8000 - Printer says "out of ink even after installing new ink cart. and new print head. I have tried two new cart. and still gives me the error. A few times it will show all inks are full and print a page or two then says it is out of ink. At one point I even was able to clean the heads and align them but same thing occurs. What is wrong??

Hi Lee_S
Try printing a Self Test Page and see what the Cartridge status & Printhead status is like.
Printing a self test page
Please let me know how you get on..
Thanks, Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

ATTENTION: FIX for duplexing problem Photosmart 7200 & 7400

There is a final update available that fixes the duplexing problem. It is posted on this discussion board as HP Leopard Updates Now Available. It is on page 3 and was posted on Dec 21 by HP Mac Architect. It is 2/3 down the page Photosmart D7200 & D7400 Series. The D means it is a final. It fixed my duplex problem. I deleted the previous drivers then installed this one. I hope it works for you.
Ann

Hi wakey-wakey,
I would recommend accessing your Temp folders, rename a Temp folder to 7zS588E and run the installation from that folder.
Please keep me posted.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Hp Officejet 8000 Set to print Gray scale but still using color

Hp Officejet 8000 Set to print Gray scale and use only Black ink, Draft Quality, but still using color ink. I'm replacing color ink cart more often the Black. I understand even when set to black only it will still use some color in cleaning and such. but not the amount of color it is using now. Printer has me pissed total waste of money. I'm ready to get my Xerox Phaser solid ink printer fixed. as it was super cheap on ink.

Hello Lynn,
Is your network router located near your desktop PC and L7590 officejet?
If so, I would suggest that you connect the L7590 to the router with an ethernet cable(you can also leave your usb cable connected to the desktop). Then you can connect more directly (still through the network) to the L7590 with your dv7 laptop instead of connecting through the desktop. Since your dv7 is wirelessly connected to the router, and the L7590 is also connected (wired) to the same router, the setup is much easier.
If you want to try this, first download the software from hp.com (click here for the download page). When you run the installation on your dv7 notebook you will be guided through the steps necessary for connecting to the printer via the network.
Dont forget to reply and let us know how it goes!
Kent G.
I work for Hewlett-Packard

Duplex problem with inline card "WAN0" again

Hi,
We got duplex problem again "new site" for the inline port WAN0, LAN0 is ok.
We have tried crossover and straight through cable, without any look still 100/ half duplex.
The PTT router int fa0/0 have been to 100/full and auto/auto still 100 half in the WAE.
The WAE have been in 100/full, no link or auto/auto link but 100/half.
What can be the problem, as we have this issue with most of our 574 and 274, the 674 have have no problem at all?
Below are some output from the WAE and router.
PTT router:
#sh ver
Cisco IOS Software, 1841 Software (C1841-SPSERVICESK9-M), Version 12.4(6)T7, RELEASE SOFTWARE (fc5)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 29-Mar-07 03:29 by khuie
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Router uptime is 5 weeks, 1 day, 5 minutes
System returned to ROM by power-on
System restarted at 08:09:29 GMT Sun Aug 15 2010
System image file is "flash:c1841-spservicesk9-mz.124-6.T7.bin"
Cisco 1841 (revision 7.0) with 116736K/14336K bytes of memory.
Processor board ID FCZ112411HV
2 FastEthernet interfaces
1 Serial interface
1 Serial(sync/async) interface
1 Channelized E1/PRI port
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
63488K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
#sh int fa0/0
FastEthernet0/0 is up, line protocol is up
Hardware is Gt96k FE, address is 001b.d5ab.3fc8 (bia 001b.d5ab.3fc8)
Internet address is 10.252.105.12/22
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Half-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 103000 bits/sec, 89 packets/sec
5 minute output rate 625000 bits/sec, 93 packets/sec
     110094543 packets input, 2604076581 bytes
     Received 10013739 broadcasts, 0 runts, 0 giants, 0 throttles
     21 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog
     0 input packets with dribble condition detected
     110416771 packets output, 4153304953 bytes, 0 underruns
     149371 output errors, 113762 collisions, 149376 interface resets
     0 babbles, 149940 late collision, 0 deferred
     0 lost carrier, 0 no carrier
     0 output buffer failures, 0 output buffers swapped out
From the WAE:
#sh interface inlineport InlineGroup 1/0/wan
                                     ^
% Invalid input detected at '^' marker.
ZAJOPWAAS01#sh interface inlineport 1/0/wan
Device name        : eth4. Bypass master interface.
Packets Received   : 59466951
Packets Intercepted: 50007028
Packets Bridged    : 10002103
Packets Forwarded : 44722188
Packets Dropped    : 69
Packets Received on native      : 0
Active flows for this interface : 0
Ethernet Driver Status
Type:Ethernet
Ethernet address:00:E0:ED:11:E5:A8
Maximum Transfer Unit Size:1500
Metric:1
Packets Received: 59466909
Input Errors: 0
Input Packets Dropped: 0
Input Packets Overruns: 0
Input Packets Frames: 0
Packet Sent: 64238956
Output Errors: 116996
Output Packets Dropped: 0
Output Packets Overruns: 0
Output Packets Carrier: 116996
Output Queue Length:100
Collisions: 182840
Base address:0x5000
Flags:UP BROADCAST RUNNING MULTICAST
Link State: Interface is up,line protocol up
Mode: autoselect, half-duplex, 100baseTX
1#sh ver
Cisco Wide Area Application Services Software (WAAS)
Copyright (c) 1999-2010 by Cisco Systems, Inc.
Cisco Wide Area Application Services (WAAS-UNIVERSAL-K9) Software Release 4.2.1
(build b38 Jun 16 2010)
Version: oe574-4.2.1.38
Compiled 20:44:26 Jun 16 2010 by damaster
Device Id: 00:26:55:ad:cd:04
System was restarted on Mon Aug 30 16:48:52 2010.
The system has been up for 2 weeks, 6 days, 17 hours, 52 minutes, 10 seconds.
Jan Rockstedt

Hi Jan,
If you are connecting Router to WAN0_0 port, you should use cross-over cable under most of the circumstances and unless you are using all gig interfaces on both sides. This will avoid any hardware limitations due to non-Auto-MDIX supported hardware.
Cisco strongly recommend that you do not use half-duplex connections on the WAE or on routers, switches, or other devices.
You will find more information here: Cabling
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/wae/module/inline/installation/guide/17880fru.html#wp39911
Further, there is a possibility that the interface on Router / WAE inline adapater / cable might be bad. I would suggest following in that case.
1. Using a new cross-over / stright cable. if the issue continues, proble lies on the interface sides.
2. Using a different port on router. if the issue continues, problem is with WAN0_0 port of WAE.
3. Try connecting wan0_0 port to another switch / router to see if it negotiates at full duplex. If it still continues at half duplex, there is an issue with WAN0_0 port most probably.
4. Try connecting secondary gig port or WAN0_1 port to same router interface. If the issue continues, problem may be with router FA0/0 interface.
If you find that issue is with either router / WAE inline interface, please open a TAC case for RMA.
Hope this helps.
Regards.
PS: If this resolves your issue, please mark this as Answered.

Network unavailable officejet 8000

My Officejet 8000 wireless was working fine until I added a Apple Airport Express to my Airpoty/Time Capsule-based network. I uninstalled the HP software, downloaded the installer for OS Snow Leopard (current version on MacBook), installed. The installer recognizes the two parts of my network, both with high signal strength. When I select the network and click Continue, I get a message "the selected Wi-Fi network (my network) is not within reach of the device." (Change Network/Retry)
Of course it is.
I have tried rebooting the Airport/ Time Capsule, but I cannot get by this message. I can print by plugging into the USB, but with a corporate laptop, MacBook, Asus tablet, and desktop on the wireless, it's a big pain.
Any help will be much appreciated!
This question was solved.
View Solution.

Yup, change the channel on the Time Capsule to 11. I believe the Express will just join whatever channel its base station is on (the Time Capsule) and you can't change it in the "Extend" mode.
I assume both have a green light?
If that does not work, uplug the Express from the wall, install the printer, then plug in the Express.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Officejet 7210 all-in-one duplex problem

Since connecting Officejet 7210 to laptop running Vista Business, the 2-sided printing accessory with rear tray is not recognised. I have been using the Deskjet 990C driver for 2-sided printing but it does not recognise the rear tray. Am unable to print photos using the rear tray, & when I try to load the 4x6 photo paper into main tray, the image will only print from the centre position of an A4 page, not the location when the tray is adjusted for the 4x6 (10cm x 15cm) stock. How can I enable the rear tray to feed the photo stock.
Is there an updated driver for the 7210 that supports the duplexer with rear tray or what other workaround can you recommend?
This question was solved.
View Solution.

Since the duplexer and rear tray were optional on the Officejet 7210 the driver will default to them being "not installed". Go to the printers folder, right click on the 7210, Properties, Device settings, Installable Options and set the Duplex Unit and the Rear Tray to installed, Apply, OK.
Once this is done the rear tray should be accessible and you can try duplex printing. You will probably need a patch to correct the back side printing upside down when duplexing, this is available as described here.
Regards,
Bob Headrick, MS MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Officejet 6700 duplex printing problem

Hi. When I select duplex printing on my new Officejet 6700, the image looks squashed (horizontally) so the circle looks like an upright oval. It prints fine when in single-sided mode.

Hello again Nich7503,
Thank you for the update and the feedback. Contrary to popular belief, we do value this information and want our users to have the best possible experience. I've included a section of the User's Guide below, would you mind validating the duplex process that you used to get these results? Just in case, the link to the User's Guide is pasted below these steps. Thanks again........
Print on both sides (duplexing)
You can print on both sides of a sheet of media automatically by using the automatic twosided printing accessory (duplexer).
NOTE: Two-sided printing requires an automatic two-sided printing accessory
(duplexer) to be installed on the printer.
NOTE: You can perform manual duplexing by first printing only the odd pages,
flipping the pages over, and then printing only the even pages.
Perform two-sided printing (Windows)
1. Load the appropriate media. For more information, see Load media.
2. Make sure the duplexer is installed correctly.
Chapter 2
36 Print3. With a document open, click Print on the File menu, and then under the Print on
Both Sides options on the Layout tab, select either Flip on Long Edge or Flip on
Short Edge.
4. Change any other settings, and then click OK.
5. Print your document.
Perform two-sided printing (Mac OS X)
1. Load the appropriate media. For more information, see Load media.
2. Make sure the duplexer is installed correctly.
3. Select a paper size:
a. From the File menu in your software application, click Page Setup.
NOTE: If you do not see a Page Setup menu item, go to step 4.
b. Make sure the printer you want to use is selected in the Format For pop-up menu.
c. Select the paper size from the Paper Size pop-up menu, and then click OK.
4. From the File menu in your software application, click Print.
5. Make sure the printer you want to use is selected.
6. Select the paper size from the Paper Size pop-up menu (if available).
NOTE: You might need to select the paper-size option labeled Two-Sided
margins.
7. Click the Two-Sided Printing pop-up menu, select Print Both Sides, and then click
the appropriate binding options for the document.
- OR -
Click the Layout pop-up menu, and then select the appropriate binding options for
the document from the Two-Sided pop-up menu.
NOTE: If you do not see any options, click the disclosure triangle next to the
Printer pop-up menu or click Show Details.
8. Select any other print settings that you want, and then click Print to begin printing.
Print on both sides.
http://h10032.www1.hp.com/ctg/Manual/c03227497.pdf
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Installing HP Officejet Pro 8000 Wireless problems

I'm having a problem installing my printer. When I first installed it I could use it as a local printer (usb wired to my computer) and it printed fine. I have a laptop and purposely bought the wireless printer so that I could use it with the laptop. My father came over and tried to hook it up wireless and couldn't get it and now that I've tried to go back and use it wired, it freezes up on me. It gets an error printing and when I troubleshoot it it says its fixed yet it still won't print. Also, when i delete the device and try to install it again, it comes up with 2 copies of it installed on my computer. I am running Windows 7.

Tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
Where did you get the software for the printer?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Printing Problems on HP OfficeJet 8000 Pro

I'm having a severe problem printig PDFs on the above mentioned printer. The situation:
I'm working a small network of three computers, 2 machines are working with Win XP, Service Pck 3, 1 machine Win 7. The printer is connected to the Win 7 computer. On one of the Win XP computers Adobe Reader 8.3 is installed. On the other one Adobe Reader 10.1. With both, the Win 7 machine (Reader 10.1) an the one XP computer with 8.3 I'm able to print PDFs. The only computer that does not print PDFs on the HP printer is the XP machine with version 10.1.
To make it a bit more complicated, PDFs are not printed exclusively by the HP printer. All other printers, HP LaserJet, Canon MFP, do the printjob normal.
Does anyone have a solution to that? Sorry for my bad English, I'm not a native English speaker.
Thanks in advance

Guzzibrummer wrote:
The only computer that does not print PDFs on the HP printer is the XP machine with version 10.1.
What is the full Adobe Reader version on that machine: 10.1.2? Try http://helpx.adobe.com/acrobat/kb/pdf-wont-print-reader-10.html

Officejet Pro 8600 Plus Duplexing Problem

When I print a document that is one sided the printer stops and lets the ink dry and pulls it back in as if it were a double sided document. Is this normal for this printer. This is my first HP printer and it didn't do this on other printers that I had. The other printers sensed weather it was a single or double sided document and printed according to the document. Any help please.

Hello soundfx411,
Welcome to the HP Forums.
I see that you are having an issue with the paper being drawn back into the printer as if it was double sided print job.
This could be cause by a few different reasons. First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Just so you know, HP products already have built in surge protector and if you have it connected to a power bar/strip, the unit will not get all the power it needs to function properly and this could cause other issues that you may not see on the surface such as Ink system failures or skewed or crooked printing or ever scan/copy issues.
So I can better assist you, please respond with which Operating System you are running.
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Write me back when you have time and I will be happy to explore other options if needed.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP OfficeJet 8000 duplex problem.

Similar Messages

Maybe you are looking for