HP OfficeJet J4680 All-in-One getting Copy error message when copying from front panel.

I get this message when I try to copy from the front panel: Incorrect paper size. Load different media or change copy paper size settings. It does not matter what I am trying to copy. I have checked the paper size and media and they are set on what I want -- Letter size and plain paper. It started after I cleared a paper jam from the back of the copier. Hope someone can help me. Thanks Klb

I am also having the exact same problem. I tried resetting it back to default settings (power on, unplug power cord, hold the # and 3 buttons while plugging back up). However, this has not helped. So far the only solution I saw is to upgrade to another printer, but copying seems to be such a simple function for this problem to be so hard so solve. Unfortunately, I've seen no other answers, so upgrading may be my only option even though I have no other problems :-(

Similar Messages

Get an error message when importing from iPhoto says, "There is not enough free space on your Aperture Library volume to import the selected items. It is estimated that you need at least 44GB of free space."

I get an error message when importing from iPhoto that says, "There is not enough free space on your Aperture Library volume to import the selected items. It is estimated that you need at least 44GB of free space." the drive is empty, I just reformatted it to Mac OSX journaled.

I'm guessing this is an extrenal drive, correct? If so make sure the library you're importimng into is really located on the external drive. By default Aperture creates its library in your home pictures folder.

When installing a NI 5112, I get an error message when running the test panel.

I have recently decided to reinstall my PCI 5112 high speed digitizer in a different computer, for practical reasons. After having installed the software, hardware and successfully passing the self test, an error (10800) occurs when running the test panels. The signal applied to the channel and the different parameters used, worked fine with the previous computer but not with this one. Any idea why?
Thanks,
Thomas

Hello Thomas,
The error code you are getting is related to the board not recording enough samples in the given time interval. May I ask which series of PCI card you are using. This can be found by looking at the device in Measurement and Automation Explorer and looking under devices and interfaces. The series letter is the one on the end of the number after the hyphen. E.g. PCI-MIO-16E-4 would be an E-series board.
Also which versions of Measurement and Automation Explorerand NI-Scope are you running? Are these the same versions as you used in the old PC system? Sometimes an upgrade in the version is all that is required to fix such a problem but unfortunately it can sometimes cause a problem if you upgrade! It would depend on the versions you are currently running and the series of the board that you are using.
LeeM
AE,
National Instruments
Message Edited by LeeM on 10-31-2006 10:47 AM

Why do I get a error message when emailing from Lr?

What am I doing wrong, trying to send Lr email?
I get this "Message:
Can't send e-mail because some selected photos are missing."
I highlight a photo and right click, select 'Send e-mail' and the email form comes up - with the pic thumbnail showing at the bottom. Fill in the address and description and hit send.
Doesn't matter if I'm in Develop or a collection.
Thx!
jim

Check the thumbnails for exclamation marks, an indication of missing files. If you have moved images or folders using your computer operating system LR won’t know what you did and the original links will have been broken. You need to point LR to where you now keep the image(s) on your hard drive.
This document has further information.
Adobe Lightroom - Find moved or missing files and folders

Getting "connection error" message when importing from Panasonic PV-GS65

please help

Hello,
Are you willing to try other ways to do the same?
http://www.excel-sql-server.com/excel-import-to-sql-server-using-linked-servers.htm
http://support.microsoft.com/kb/321686 (Distributed queries)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

HP Officejet J4680 All-in-One printer is ghosted and renamed "HP Officejet J4680 Series (Copy 1)?

Printer Model, Notebook or Desktop Model Number: HP Officejet J4680 All-in-One Printer
Operating System (including service pack revision): Windows 7 64-bit Home Premium Service Pack 1
Error messages: None
Recent hardware or software changes made to the system: None
Problem Description: HP Officejet J4680 All-in-One printer is ghosted and renamed "HP Officejet J4680 Series (Copy 1) and a new printer appeared: HPD8D625 (Officejet J4680 series). I don’t know how this all came about or why?
I used the HP HPD8D625 for a while but it took a long time to began to print and only buffered a small amount. I went back to my stand by printer, but know my wife want to use the wireless network to do her printing, so I have to fix it.
Connection Method: Wireless
Diagnostic Summary
Troubleshooting performed: Yes
First Wireless Network Report:
Everything: Passed
Signal Strength: Excellent
Other networks detected matching your network name (SSID): No
Configuration Summary
Network Name: Correct
IP Address: Correct
Config Source: DHCP
Communication Mode: Infrastructure
Authentication Type: WPA-PSK
Encryption: Automatic (AES or TKIP)
Second Wireless Network Report:
Network Name: Was different
Of course that disrupted the whole report.

BH
Thanks for responding. What I did today was hard wire the printer to computer. then was able to get my original printer icon back and it was set as the default printer. I deleted the other icons, they were ghosted and I didn't what to use them. the one was a online printer going back to HP. Now I have to got my son to fix the remaining problem I have, with my messing around I somehow change the Network Name on the printer. He is a computer eng working on high tech cameras and also is the administrator of my machine. He has me locked out of administrative rights and for good reason, I wrecked a couple computers and when he built this one for me that was the rule. There is a little info that I don't have to finalize the last step in changing the Network Name back. I have run the printer from the printer control panel and it did find the correct Network and Network Name but is seemed like that is far as I could go. So I'm not that far from completing this project.
LH

Wireless Problems between laptop with OS Windows 7 64 bit and HP Officejet j4680 all in one

Hi I am having problems connecting wirelessly to a HP Officejet j4680 all in one printer, even though it has been connected wirelessly before, and also works fine with the cable in.
OS - Windows 7 64-bit
Error - driver errors, saying the printer is not compatible with windows 7 64 bit (however it has worked previously)
Changes to system - cannot remmeber making any changes to OS
Cheers

Uninstall the HP software using the uninistaller in the HP folder.
Restart your PC.
Get the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP officejet j4680 all-in-one paper jam issue

I bought HP officejet j4680 all-in-one two months ago from a dealer. Now it keeps telling me a "paper jam" which doesn't exist. I tried everything from the troubleshooting in HP website. The jam light just keeps blinking. Now I am so frustrated with this product.

@CAGY, take a look at this HP link on how to clear a jam.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

HT201318 I keep getting an error message when trying to purchase asdditional icloud storage. All information is up to date.

I get an error message when trying to purchase addtional icloud storage. All of my credit card and account information is up to date.

This behavior was described here many times.
Apple delivered a technote about that.
Go to my public BOX (address below)
Download :
public_YK›
for_iWork'09›
other_iWork'09 items ›
uninstall iWork '09.zip
Expand the archive then run the script.
After that, reinstall the application (or the entire package)
If you bought Pages thru the Mac App Store, there is no need to pay one more time.
Yvan KOENIG (VALLAURIS, France) jeudi 26 avril 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

HT1151 I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install

I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install okay

Hello Valerie Anderson,
I'm Harry from Norton Support team. Please check the information provided in a similar thread here:
https://discussions.apple.com/message/21854775#21854775
Let me know if this helps.
Thanks!
Harry

I get an error message when I try to use share function on IPhoto. I get the triangle icon with an exclamation mark inside of it.

I get an error message when I try to use the share function on iPhoto. When I try to share photos via email a triangle icon with an exclamation mark appears. Why can't I use share function?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
What version of iPhoto? Assuming 09 or later
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Why do I get an error message when I access my Shopping Cart?

I have no problem accessing Music Store or adding songs to my cart, but I get an error message when I attempt to access my Shopping Cart. My Keychains are in order and my account is active. I have not changed ISP nor is my computer new to iTunes and the Music Store. Suggestions?!
iMac Mac OS X (10.4.5)

At last a solution.
But, you must be willing to forfit your shopping cart list and start over. If you mangaed to have a hard copy of it printed out before you lost contact with it you are lucky. I was not. But at this rate I was willing to clear out my cart just to be able to start over. (I was using my shopping cart as a wish list and I think it got to be rather large and larger and larger- and when I did try to buy things it took a long time for it to reset itself until I could not access it at all)
Turns out I exlpained what happened to the music store on the link below (scroll to bottom of link page for the email option to customer service)-
http://www.apple.com/support/itunes/musicstore/connect/
-and told them I was willing to clear it out- which they did and they said it was necessary in order to reset my cart. They also refered me to this other link on how to create a wish list in the MUSIC STORE . This was helpful.
http://docs.info.apple.com/article.html?artnum=107961
IF YOU DO NOT WANT TO LOOSE YOUR SHOPPING CART LIST, I did read that one could try to de-authorize and then reauthorize your computer. At least so you could print out your cart list if it is really long. I did not try this, but it was next on my list of options.
Hope this helps.

I get an error message when trying to sign into the support community with another Apple id. On the pick a username screen I get "an account utilizing this address already exists...." despite trying a few usernames. Anyone know how I can resolve this?

I get an error message when trying to sign into the support community with another Apple id. On the <pick a username> screen I get "an account utilizing this address already exists.Only one account per email address is allowed on the Apple Support Communities" despite trying a few usernames. Anyone know how I can resolve this?

This problem has been driving me demented. The instructions that Ivan gives have partially worked for me. By following his link
"How to find out if you have multiple Apple IDs" I was able to identify that yes I did have two apple accounts using the same e mail address. One was very old that I used to use for the forum boards and one is my much more recent ID that I use for everything these days. So I changed the e mail address for the old account which is associated with these discussion boards and that's the account that I am now posting this from. However even though the two accounts now have different e mail addresses when I try to log onto the boards with my more recent main apple ID I still get all the same errors as described at the start of this thread by rodgers_j. And of course that's the one I want to use so that I only have one itunes account for everything.
So if anyone has any more hints I'd be very grateful.

HT4943 Error during download - I keep getting this error message when installing or updating apps

I subscribed to wired magazine and I am trying to download the first mag, however I keep getting an error message stating "error during download, try again later". I also get an error message when trying to resume paused updating of apps. I've tried turning ipad2 off and then on again but this doesn't work. Can anyone help?

There are all basic troubleshooting steps that have worked for other users in the past that were having problems downloading and updating apps. YMMV .....
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

I get an error message when trying to update quicktime player

why do i get an error message when i try to update quicktime player that says "the feature you are trying to use is on a network resource that is unavailable", and further states that "click OK to try again, or enter an alternate path to a folder containing the installation package 'quicktime.msi' in the box below".. when i try to locate the file quicktime.msi, i am unable to locate it anywhere on my pc, which then will not allow me to complete the installation, nore will it allow me to uninstall the application.

"the feature you are trying to use is on a network resource that is unavailable", and further states that "click OK to try again, or enter an alternate path to a folder containing the installation package 'quicktime.msi' in the box below"..
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another QuickTime install. Does it go through properly this time?

HP OfficeJet J4680 All-in-One getting Copy error message when copying from front panel.

Similar Messages

Maybe you are looking for