Hp officejet j6450 port assignment changes each time i start up.

When I startup, the printer always comes up in "offline status", and I cannot figure out how to reset to online. The problem seems to be that each time the printer syncs up with the wireless router, the port assignments change, so I have to "discover" the correct port and reset that via the Windows control panel properties for the printer. How can I set this such that the port assignment remains constant? or is there some simpler solution? Thanks.

Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). You can find the DHCP range of the router using its internal settings page or in its manual. Use the CD that came with your router or type the router's IP address (ends in .1) into a browser.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

How can I prevent the settings on iMessage from changing each time I sync the devices with iTunes on our iMac?

Each time I sync an apple device (iPad, iPad mini, iPhone) with iTunes on our iMac the settings on iMessage and phone settings change. We use the same Apple ID and have different e-mail addresses and phone numbers; however, each time a device is sync'd on iTunes on our iMac, the iMessage settings and phone settings are changed so that we all each get each other's text messages and phone calls. After the device is sync'd/charged, I have to go into each device (all of them somehow update when only one is sync'ing) and re-set the settings to what we want. How can I prevent settings from being changed each time?

Okay I've tried safe mode. Let it run down to 98%, plugged it in, locked the screen, and waited. A few minutes later, the screen came on showing the 100% icon at the top right, full battery icon just to the left of the time, 100% text to the left of that.
I'm not going to do a hard reset until I have confirmation that this is not normal behavior for the phone because that's going to take hours of my time and gigabytes of data transfer to get all of my media and apps back on the phone and configured.
After all my griping, I do have to give credit where it's due. This phone is much more efficient than my Galaxy Nexus. I left the S5 running in WiFi hotspot mode while on battery last night. It still had over 50% left on the battery. The Galaxy Nexus would be stone dead after about 4 hours. I can live with that if I have to but I'd really rather be able to leave it on the charger at night.

My document size changes each time i close it

my document size change each time i close it. how can i lock in one size?

Hi K,
I never noticed that before. Mine only changes by a few bytes, unless I add a lot to the Word doc. I don't believe you can "lock it in."

Each time I start iTunes, it configure again the program.

I'm running iTunes v7.6.2.9 with Windows Vista Ultimate 32bits and SP1. I reinstall iTunes, but it change nothing. Each time I start iTunes, the configure window appear.
I also have some problems with QuickTime. When I try to watch a movie, I get this error message: "Error 46: Could not load or find the QuickTime ActiveX control.
Thanks in advance for your help.

This seems to be caused by a bug in the Vista installer. Are you using the link on the Quick Launch toolbar? Try using the iTunes link in the main Start Menu and it should work OK. If not try opening the program from the *C:\Program Files\iTunes* folder. I simply replace the Quick Launch link with a freshly made shortut to the iTunes msin program. I then get caught out again after every iTunes upgrade....
tt2

Each time I start FF tabs from previously visited websites automatically propagate. How do I keep this from happening?

Each time I start FF, tabs from previously visited websites automatically propagate. How do I keep this from happening?

Open the Options dialog (in the menus select Tools > Options).
Go to the general panel, and in the Startup section change the option for "When Firefox starts"

How to run rmiregistry each time windows starts

Can anybody tell me how to run rmiregistry each time windows starts.
I want to start my RMIserver automatically to work.First I need to start rmiregistry then I want to start my RMIServer class as windows service.

Stick a shorcut to it in your Startup folder or create a new Key in the registry @ HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
If you have arguements to rimreg (like port number) create a .bat script and use that to launch it.

Mail asked for a password each time it starts

I've used gmail (IMAP) for several months with no problems, until recently. Now Mail asks for a password each time it starts, then again when I try to send a mail. Despite re-entering the password and checking the box for the password to be stored, I'm prompted again the next time I re-start Mail.
I've tried several remedies described here in support discussions including:
1. delete the imap.gmail.com and smtp.gmail.com entries in the keychain then re-enter the password via Mail.
2. run keychain first aid.
3. manually enter the passwords in keychain
4. use disk utility to repair all permissions
None of the above remedies have worked for me.
With some trial and error, I've discovered that setting Access Control for the two Keychain items (imap.gmail.com and smtp.gmail.com) to "Allow all applications" (rather than the default "Confirm before allowing" with "Mail" as the listed application) does work.
So it appears that Keychain allows Mail to store the passwords but then does not allow Mail access to retrieve the stored passwords once Mail is restarted when "Confirm before allowing" is set.
Although now I have a "Work-around", does anyone have an idea of what's broken and how to fix it? Thanks.

OK. I tried the "Keychain Reset" and it did not work. The reset created a blank keychain file. I entered the mail passwords after starting Mail.app, then quit Mail. When I restarted Mail.app, it prompted again for the previously entered password. No change.
The clue to the problem is the current "work around". If I set "Allow All Applications" the Keychain allows Mail.app to use the stored passwords. Of course this defeats part of the security.
So Far...:
I've tried several remedies described here in support discussions including:
1. delete the imap.gmail.com and smtp.gmail.com entries in the keychain then re-enter the password via Mail.
2. run keychain first aid.
3. manually enter the passwords in keychain
4. use disk utility to repair all permissions
5. reset Keychain Access.
None of the above remedies have worked for me.

Each time I start Firefox it says: "URGENT! Your version of Firefox is no longer protected against online attacks. Get the upgrade - it's fast and free!" I am using ver. 3.6.13 and upgrading "successfully" only stays on 3.6.13 with same URGENT message.

Each time I start Firefox it says:
"URGENT! Your version of Firefox is no longer protected against online attacks. Get the upgrade - it’s fast and free!"
I am using ver. 3.6.13 and upgrading "successfully" only stays on 3.6.13 with same URGENT message.

Your UserAgent string in Firefox is messed up and needs to be reset. 
[http://en.wikipedia.org/wiki/User_Agent]
type '''about:config''' in the URL bar and hit Enter 
''If you see the warning, you can confirm that you want to access that page.'' 
Filter ='''general.useragent.''' 
Right-click the preferences that are '''bold''', one line at a time, and select ''' ''Reset'' ''', 
Then restart Firefox

"Loading iTunes Match" showing each time I start Music

Hi,
I've recently had some trouble with iTunes match, where it wasn't downloading songs, although I could stream them fine. I spoke to someone from Apple who suggested turning off iTunes Match, then do a 'Reset All Settings', then re-enable iTunes Match. This seems to work fine, as I can now download songs.
Since performing the above 'reset', each time I start 'Music', it displays 'Loading iTunes Match', the progress bar gets all the way across, then I see my songs (not my playlists though - but that's a separate question). However, if I come out of Music, and go back in, I see the same message..
I've now tried about 10 times, with re-boots and turning off/on iTue

Hi,
There may a problem track amongst those tracks that are waiting. Firstly, add iCloud status column to song view - go to menu > view > view options and tick box.
Next is to examine those tracks waiting - is there anything unusual or large? You may need to remove all those tracks waiting from your library. Next hold shift key whilst turning off match. Close iTunes, reopen and turn on match. You will be asked to add this computer, do so. The match process should be quick, match will remember previous matches and uploads.
Once process complete, readd those tracks, a small batch at a time. This will help you find any track that match does not like.
Jim

Each time I start up my MacBook Air a document appears on the desk top -calendarlogging.txt I'm synching my calendar with iCloud. Using Mavericks, but the same file was appearing using Lion. Any thoughts. Thanks

Each time I start up my MacBook Air a text file appears on the desk top (calendarlogging,txt) the file/document contains lines of code. I'm using iCloud to synch my calendar to multiple other devices - iMac, iPad and iPhone. Using Maverick on both my iMac and my MacBook Air. The file was also showing up on the desktop when I was using Lion. Any thoughts?

Hi everyone,
To anyone who might read this, I ended up re-installing with the original install disc and was able to get back on to Mac, though I lost all of the previous data that I had not backed up. Unsure still if it will continue to let me access the HDD in this, but it kind of confirms that installing Lion probably put too much stress on the computer this last year.

Why do I get a pop up each time I start up

I get some game/education pop up

See these articles for some suggestions:
* https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
* https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved
Do a malware check with some malware scanning programs. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Why is the selection filter not remembered each time i start Ultiboard 10

Why is the selection filter not remembered each time i start Ultiboard 10 the filter is differend from the last time i closed Ultiboard.
Solved!
Go to Solution.

Hi there,
Thanks for posting this. We've identified the root cause of this issue and have fixed this. This problem is fixed and should be available with our next maintenance release.
Yi
Software Developer
National Instruments - Electronics Workbench Group

I downloaded Adobe Premier Elments 9 and now I get a Windows Installer Pop up each time I start my

I down loaded Adobe Premief Elments 9 and now I get a Windows Inataller Pop Up each time I start my computer and it cannot be deoeted.
I has the following message; "Windows installer', The feature you are trying to use is on a netword resource that is unavailable. It futher states,
Click OK to try again, or enter an alternate path to a folder containing the installation package HPProductAssistance.msi in the box below.
None of these options have been successful over the previous two weeks.
I have scaned most all forums and was unsuccessful in those also

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01631295&lang=en&c c=us&contentType=SupportFAQ&prodSeriesId=2510609&prodTypeId=18972

Airport Express software update reminder each time at start up

Why do I get Airport Express software update for 5.4.2 reminder each time at start up? I try to update from 5.4.1 by clicking update button, and zoom, the Airport Express screen disappears and no update begins. Your help is appreciated.

I'm not getting an update message, so I can't re-create your view, but this might help.
Open AirPort Utility. On the AirPort Utility menu right next to the Apple icon, select Check for Updates.
Any help?

My latest two extension updates constantly show up as tabs each time I start FireFox. Where should I look to make this stop?

WebMail and Xmarks have constantly and consistently shown up as update notification tabs each time I start FireFox. That never used to happen. Is there somewhere I can look to shut off this annoying action. Thanks.

See these articles for some suggestions:
* https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
* https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved

Hp officejet j6450 port assignment changes each time i start up.

Similar Messages

Maybe you are looking for