HP officejet J6480 stopped printing with Airport express.

My HP Officejet J6480 suddenly stopped printing wireless. I have my Mac and the printer on a network with an Airport express. The printer prints fine with USB. I have checked all HP software, drivers, and used the wizard to "reconnect" to the Mac. Everything is appropriate that I can tell. When I do the network setup with HP printer, it recognizes my network/router, but then asks me for my "WPA Key." I have no idea what this is or where to retrieve it to enter into the HP printer. Is this the final step to connect wirelessly??? How to I find how about the WPA key that will provide wireless connectivity??

The WPA or WEP key is the wireless encryption password you specified for your wireless network. If you no longer recall what it is, you'll have to reconfigure your Airport Express with a new one, and supply the new password to all your wireless equipment.
If you're still having trouble finding the printer, it may be due to having configured it to receive its IP address dynamically. That's appropriate for most wireless clients, but not for printers. Your Express may have reassigned its address to something else when it appeared the printer no longer needed it. A power failure will also cause a router to reassign IP addresses.
When that happens you have to create a new printer queue in OS X Print and Fax preferences, since the printer is no longer in the same "place", network-wise. For that reason, it's a good idea to specify a static IP address for printers. That way, its IP address never changes, and you don't have to create a new printer queue every time various iMacs, iPhones and other iThings drop in and out of your wireless network.

Similar Messages

  • HP PSC 1410 not printing with Airport Express

    I have just purchased this printer. I'm running Tiger on a Powerbook G4.
    When I set up the printer with a direct USB connection to my computer, the printer is added with the driver "HP All-in-One 3.0.1" automatically chosen. It works just fine.
    When I plug in the printer to my Airport Express, the same All-in-One driver is automatically offered. I chose it, and the printer is added to my list of printers no problem. However, it just won't print. It tries to start the print job, and then the printer icon bounces in the dock with a big red exclamation mark. I try to click on start print job, and the same thing happens - it tries to start the job, but then just stops and the exclamation mark appears.
    Does anyone know what might be wrong?
    Thanks
    Theresa

    The PSC 1410 is not on the list of known compatible printers found at http://www.efelix.co.uk/tech/1013.html - which may very well explain the problem.

  • Printing with Airport Express: never compeletes

    Hi,
    I have an HP Deskjet 5740 connected over my Airport Express.
    Printing works fine except for one very annoying issue: after the job is done the task is still in the printer's queue, and the activity light on the printer does not stop blinking.
    When you look at the printer window under XP, it shows a weird "pages" count, like 4/1 when printing one single page.
    In order to print something else you need to cancel the job manually from the printer tray.
    Can somebody please help me?
    Thank you
    HP nx8220   Windows XP Pro  

    I am having the exact same problem with Airport Extreme.
    Hp 6540 printer talks perfectly to iBook but has this problem from Dell desktop.
    Hp support neither Mac or Windows could offer any help.
    iBook   Mac OS X (10.3.9)  

  • Printing with Airport Express as Base Station

    That is, I think our Airport Express is our base station. It's the only thing we have, and we can connect to the internet just fine, but it doesn't show up in the Airport Utility.
    The main problem is printing through the Airport Express. Our printer prints fine when plugged into the USB on the ibook but it won't print from the USB on the Airport Express.
    We can see the printer located on our wireless network but when we try to print the print center says that printing has stopped with an error of level one, or category one or something. I do see the appropriate printer driver on the list when I add the printer (I think it's an Epson C40ux, but I'm doing this from memory) and that's set correctly. I've got the unofficial list of printers that work and don't work and I see that some printers may need other drivers to work from the wireless network. There must be other things to check, but I'm a little new at this. It seems like this would be a common problem but I'm not seeing many posts like this so if anyone has a moment and any ideas I'd be grateful. Thanks. Mark
    Ibook   Mac OS X (10.4.2)   Airport Express

    Thanks... I will try that first. I've also been advised to delete the network and add a new one with the printer connected... but your idea is simpler.
    M

  • Print with Airport Express

    I've just buyed a new printer (HP Laserjet Pro 300 Color m351a) and installed new HP drivers in my Macbook Pro (with OSX 10.9 Mavericks) and when I connect the USB cable to the Airport Express (first model) to use it wireless I'm not able to see her in printer menu.
    When I connect the printer directly to the Mac works fine
    Can anybody help me?

    Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the  AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers. 
    To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
    Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

  • Lexmark does not support USB printing with Airport express

    See email from Lexmark:
    Hi Herman,
    Welcome to Lexmark e-mail support. I appreciate your query into Lexmark.
    Lexmark Inkjet printers are host based & work only USB attached. Currently Lexmark International does not support Airport Express on these printers.
    If you have any more questions or concerns, please contact me at your convenience and I will be happy to assist you. (If I am not available, another representative will reply to you as soon as possible.) To respond, please select "Reply" in your e-mail software, and be sure that the past e-mail is included in this reply.
    Regards,
    Arshad
    Lexmark Technical Support
    ***Original Message***
    On Sun Jun 18th 03:20:53 PM EST 2006, hernan.
    Dear Mamta,
    Thank you very much for your support. I already tried what you
    mention, but still without success. I downloaded again the x1100 all
    in one driver but still I can't print.
    Any suggestions?
    Thank you,
    Hernan
    -----Original Message-----
    From: [email protected] [mailto:[email protected]]
    Sent: Sunday, June 18, 2006 7:30 AM
    To: hernan
    Subject: Re:Lexmark Technical Support (Req# 942782055)
    Dear Hernan,
    Thank you for contacting us regarding this matter. I appreciate the
    opportunity to assist you, and I hope my suggestions will provide a
    resolution.
    Please follow the steps given below:
    1. Click on "Start," "Control Panel" and "Printers and Faxes."
    2. Right click on the Lexmark printer icon.
    3. Click on "Properties."
    4. Click on "Ports" tab.
    5. Place a check mark against "Enable Bidirectional Support."
    6. Click on "OK."
    You may copy and paste the web address given below to access the
    Lexmark 1000/1100 Color Jet printer Windows XP driver:
    http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:
    1:0:1:0:0&emeafr
    ame=&fileID=1580&searchLang=en&searchLang=en
    Please use the following steps to download the Lexmark 1100 Color Jet
    printer Windows XP driver to your desktop:
    1. Click on "Download Now."
    2. On the "File Download" screen, choose "Save."
    3. The next screen will be titled "Save As." Choose to "Save in
    Desktop"
    and click "OK."
    4. You should see files being transferred.
    ***Note*** If your browser uses a different file downloading format
    than specified above, you will need to resort to your browsers help
    files for downloading instructions. The object of steps 1 - 4 is to
    download the driver to your desktop. This way it is easily accessible.
    5. Once the files have completed downloading, double click on the icon
    with your file name.
    6. On the "Win Zip Self-Extractor" screen click "OK."
    7. To unzip the downloaded file choose "Unzip."
    8. A screen will then display the number of files unzipped
    successfully, click "OK."
    9. Please follow the on screen instructions to complete installation
    of your Lexmark printer.
    If you have any more questions or concerns, please contact me at your
    convenience and I will be happy to assist you. (If I am not available,
    another representative will reply to you as soon as
    possible.) To respond,
    please select "Reply" in your e-mail software, and be sure that the
    past e-mail is included in this reply.
    [AOL Users: In order to include the previous e-mail, you must
    highlight it with your mouse when you are replying.]
    If you need to reply, please be sure to include in your message all
    information from prior e-mail messages & replies. If your e-mail
    client automatically deletes prior e-mail thread information, it will
    cause a delay while we look up your support history. If this is the
    case you may want to save the old e-mails as attachments and attach
    them to the current e-mail.
    Sincerely,
    Mamta V
    Lexmark eSupport Team
    http://support.lexmark.com
    Rate Your Support Experience! Your feedback is extremely valuable to
    us.
    Please click the link below to participate in the Lexmark Customer
    Support Survey.
    http://support.lexmark.com//cgi-bin/survey.cgi?getSurveyID=7
    07&getSurveyName
    =
    ***Original Message***
    On Sat Jun 17th 06:20:55 AM EST 2006,
    hernan.>
    I purchased the Apple airport express that connects
    multiple
    wireless-networked PCs to a usb printer.
    is there a driver that can make this work?. I configured
    the printer
    according to the manual, received a test page and so on, but now it
    takes ages to start printing and printing never gets to 100%
    completion but to 99%. I am not able to cancel printing jobs and this
    is a whole mess.
    Best regards,
    Hernan
    vaio pcg-6c2l and IBM x40   Windows XP   Both service pack2

    Did you have a question?

  • Error 6753 when printing with airport express

    Hi all-
    I'm trying to us my airport express to set up wireless printing from my PC laptop. Right now, I've got a netgear router and I -think- I've managed to con nect the airport express to join that network. My goal is simply to use the airport express to print wirelessly.
    I've got a green light on the AX and printer is plugged in by USB. However, every time I try to print I get this: 6753 error.
    Status: green light
    Mode: join a wireless network
    Wireless: it's got my network and pw. I've checked the "allow Ethernet clients" although I don't know if I need that.
    Connect using: Wireless Network
    Underneath this it says "This AX shares a single IP address with wireless clients using DHCP and NAT." Then it has connection sharing bridge mode, but this is greyed out and I can't select anything.
    Printers: I see my printer listed, but when I click share printers over Bonjour I get an error message before I can update the AX. It says to edit and change it to a wide area host name.
    Do I need to change some settings? Or what "wide area host" do I need to change it to?
    I am very new at this. Thank you for any help!

    Thanks... I will try that first. I've also been advised to delete the network and add a new one with the printer connected... but your idea is simpler.
    M

  • Slow wireless printing with Airport Express

    I have a Canon MP530 printer hooked up to an Airport Express for wireless printing. My wireless internet network is through an Airport Extreme. The only thing hooked into the Express is the printer, and it works but is extremely slow. It can take an hour to print one 15 page document. Any ideas how to fix this?

    I'm not sure I understand your question, or at least I don't know how to tell connection speed with the utility. The express is set up as an extension to my current wireless network, although I'm only using it for printing.
    I had a similar experience with a hard drive wirelessly connected to the Extreme - data transfer was ridiculously slow. Is this something to be expected with wireless connectivity?

  • Internet Printing with Airport Express?

    I am windows XP user with an Airport Express being used for its wireless printing/music capabilities. It is the wireless N model. Is there a way to print when outside my wireless network or does my computer have to be on that network? I am somewhat familiar with wireless networking/routers if this is the only method.

    Welcome to the discussions!
    From the information in your post, it sounds like you have configured the AirPort Express to "join" your wireless network.
    If that's the case, your computer will need to be on the same wireless network in order to issue print commands or stream iTunes to the AirPort Express.
    Or, did I misunderstand your question?

  • Wireless Printing with AirPort Express

    Hi all, I've had an AirPort Express on my network for a while now and have been printing to a Canon LBP2900i laser printer without any problems.
    It seems that since the last firmware upgrade for the AirPort Express was released and installed I receive the error message 'this port type is not supported by your printer' when trying to print.
    It worked fine before so I can't figure out why it should be different now.
    Any ideas?

    I am using Airport Express with an Epson Photo R380 printer. When I use the Gutenprint 5.1.3 driver I get faded black type but I do have a connection to the printer and it prints.
    When I use the Epson driver (and not Gutenprint as the Epson support page suggests not using it to solve the faded print problem) the printer shows up on the Airport Express but nothing happens when I send anything to it to print.
    I've tried reloading the Epson driver etc - nothing seems to work.
    Any suggestions on either how to get regular not faded printing using the Gutenprint driver or any connection at all using the Epson driver?

  • Printing with Airport Express

    I have had an Airport Express for about 2 years, in my office to operate my HP J4550 printer wirelessly by plugging the printer into the USB port of the AE.  Today, my Airport Extreme arrived, I hooked it up for internet and now, cannot print. I cannot get the Airport Express to show up in the Extreme under "other wireless devices" or elsewhere and it blinks amber. I have unplugged all devices from each other, the wall, everything- and replugged. Still, the Express blinks amber and will not change.  Please, can you help me so the Express works again in my office and so that I can print? By the way, the office is on the same floor as the modem and the Extreme and is about 40' away. Never had this issue until I set up the Extreme. I got the Extreme because I was having issues with my very old Time Capsule base station and it was suggestion that I needed to upgrade. Funny thing is, the internet works better than ever (weird I know) but now cannot print or get the Express to function. Please help? 
    OS X Yosemite (10.10)

    Did you give all devices the same name And password? 
    the he express should show as itself, with the same name as the other routers in airport utility.

  • Printing with Airport Express without an internet connection?

    I have a printer which I would like to print from my MacBook Air wirelessly.
    I don't have any network connections neither a internet connection since I use a wireless broadband card.
    So my question is, do I need to have a internet connection for the airport express or can I just use it as a wireless to print.
    Thank in advance.

    Though you don't need an internet connection (which technically you have with your broadband card), I have read of an issue with connecting to more than one network (i.e. AirPort Express and your wireless broadband). If there is an issue, then it is possible you will have to switch to the Express for printing and back to your wireless broadband when your are not.

  • Print with airport express from ipad

    I have airport express and i will print with my ipad, but it doesn`t work. Can you help me?

    ipad cannot print to USB printer. It has to be airprint.
    There is a way around it. Use a printer app like Printopia on the iMac to handle the airprint protocols.
    There are several apps available and I don't use it so do a quick google for reviews of the best.

  • Epson 9800 printing with Airport Express

    Hello,
    I am trying to print to my Epson Stylus Pro 9800 via a new Airport Express. I want to print from my iMac running OSX Mavericks. All software is up-to-date on my Mac and Airport hardware. I downloaded the latest driver from Epson. I have tried the steps outlined in the forums of reseting, reloading the printers etc.
    Seems I can't get this thing to print wirelessly. I tried printing connected directly from my computer via the same USB cable and it works perfectly.
    Not sure what to do. The computer is able to add the printer just fine. My computer recognizes it and loads it up for use. Seems like everything connects up until the point of printing. The print dialogue box says, "Printing - Connected to printer" but all I get is the candy striped progress bar and no printing. Seems like there is a bit of a disconnect somewhere but I can't figure it out. Any help would be greatly appreciated.
    Does anyone know if the Epson Stylus Pro 9800 can even print wirelessly?
    Thanks!

    On your Mac......if you previously installed the printer at the USB port of the Mac.....then you will see an indication that the printer has been installed when you open System Preferences / Printers and Scanners.
    And....if you installed the printer again using your Mac when the Epson was connected to the AirPort Express......that will be indicated in Printers and Scanners as well.
    In other words, it will appear as if you have the same printer installed twice. But, closer inspection will reveal that the printer is installed in two places or locations on your network.....one on your Mac and the other on the AirPort.
    When you click the Print command, you must choose the correct printer location......either at the Mac....or at the AirPort from the "two" installed printers.
    It sounds like you may have installed the printer at the AirPort correctly, but you are trying to print to the printer installed at the Mac.....and it is not there.
    Another possibility would be that the Epson 9800 appears to be a professional version printer, not a simple consumer model. If nothing above works, this may be a model that will only work when it is connected to a computer.  Epson Support would be the folks to ask about that.

  • How to setup wireless printing with AirPort Express?

    Hey, I just bought a AirPort Express today and I can't figure out how to setup the usb wireless printing. Could someone explain in detail on how to do this? Thanks-Michael
    I have a Windows 7 64-bit PC and a Hp Deskjet F380 USB printer.

    Download the install Bonjour Print Services for Windows v2.0.2
    Run the program. Hopefully, your printer will be recognized.
    If it is, "install" the printer and try to print.
    Keep in mind that if you have an All-in-One type of device, that only the print function will be supported.
    Advanced features like copy, scan, maintenance, etc are not supported. You will need to connect the All-in-One directly to your PC if you need those services.

Maybe you are looking for