HP Officejet L7555 Printer Profile

Is there a printer profile available for the Officejet L7555 printer? If so, where can I get it?

This solution for the OJ 6500 E710 not recognizing the cartridge contains some of the same solutions. This may be a long shot, but one possible solution that I don't see mentioned in what you've tried already is making sure the cartridges are vented properly (Step 3). Have you tried that?
http://support.hp.com/us-en/product/HP-Officejet-6500A-e-All-in-One-Printer-series---E710/4083974/mo...
I am an HP employee.

Similar Messages

OfficeJet L7555 Printing Problems

Black print has streaks of no printing in black for entire lines. Characters are readable, just bad quality.

Hi,
Use this troubleshooting guide, click here
Kiko

Create two different printer profiles in ePrintCenter.

Dear,
I want to create two different printer profiles: one "color" printer and one "black & white" printer.
In the ePrintCenter you can only create one kind of profile. (Associated with one e-mail address)
Is it possible to set this up?
Regards.
Printer: HP OfficeJet 6500A

Hello skeg,
At this point there is not a way to create two different profiles on an account in ePrintCenter. The only way to switch between the two would be manually on the "ePrint Settings" within ePrintCenter.
If you were trying to do this from an iPhone or Android phone it would be possible to download the HP ePrint home & biz app which would allow you more options regarding printing in color and paper size and type.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

OfficeJet L7555 Cannot Be RE-Installed

Since March 2012 my OfficeJet L7555 has worked flawlessly on my Windows 7 system, wired network. Early September 2014 while trying to use my tablet on the computer via USB an attempt was made to figure out the problem. Microsoft FixIT was recommended and used. It did NOT fix the connection problem. At the same time I could no longer connect to the OfficeJet with the software. It was and is accessable using it's IP address from a browser.
The OfficeJet software was uninstalled and attempts were made to reinstall. When the software reaches the point of identifying the printer on the network, the software is caught in a loop. I click, it goes away and returns to the same point.
One suggestion was made to connect the printer to the computer via USB. The printer was moved and connected via USB. Nothing improved.
The installation software was used to install the OfficeJet on my W7 notebook successfully.
My conclusion is that FixIt changed something that the installation software does not know how to deal with. SFC /scannow has not resolved the issue either.
An attempt was made to reinstall W7 in place but it says there is not enough space on a disk (k) that does not exist on the computer. I do not want to do a clean install because approximately 220 programs would need to be reinstalled. W7 is a clean install. I built this system, March 2012.
In summary, the printer works fine from other computers. The printer can be accessed with a browser from the problem computer. The software cannot be installed on the problem computer. The software has been installed on another W7 computer within the week without any problems. A USB connection to the problem computer does not provide a useful connection.
Thank you.
Fred

Hi inflorida,
I see that you are having an issue with connecting to the printer from your Windows 7 computer.
Just so you are aware, Microsoft fix-it has nothing to do with the HP Printer or the printer software and driver. It only troubleshoots issues with the Microsoft operating system.
I do have a few suggestions that we can try in the attempt to get the printer back on line with the computer.
First step we need to do is to remove the usb cable from the computer and from the printer and leave it disconnect until further notice.
Please click on the following link and follow the instructions for Uninstalling the Printer Software.
Once the Uninstall is complete, please reboot the computer. When the computer is back up and running, click on the following link for the HP Officejet Pro L7555 All-in-One Printer Drivers. Save this file to the Desktop of the computer so that it creates its own icon. This will make it easy to find the download.
Double click the new Icon and follow the instructions. If you are going to use a usb connection, you will be prompted as to when to connect the usb cable or use wireless.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

OfficeJet 8500 Printer attached to Windows XP system via USB prints partial pages

I have an OfficeJet 8500 printer stationed at the desk of one of my users and is attached to her Windows XP system with a USB cable. The printer has started to print partial pages and will not complete a full page of text or images, color or black and white.
I have attempted to reset the printer by removing power from the printer via the power cord, and holding # and 6 while turning the printer on (after reconnecting the power cord, of course). The alignment process took place after this procedure, but it has not resolved the issue.
I have not yet upgraded the firmware from what was installed at the factory.
What might I do? What am I missing? Do I need to upgrade the installed driver on the system? Is the printer able to be salvaged? It doesn't appear to be hardware, as the portions which print are perfect; I just don't get the entire page.
Thanks in advance,
Rob

The USB to parrallel cable will work just find if you don't mind plugging in the laptop to the printer when required. If you want to modify Win XP to be able to print to an AppleTalk printer follow the instructions below.
"To install AppleTalk protocol to Windows XP
Required files: (Get them from any system running Windows 2000 Professional or Server)
netatlk.inf, sfmatalk.sys, sfmmon.dll, sfmatmsg.dll, sfmwshat.dll, sfmpsprt.dll
If they can not be found you need to unhide hidden and system files.
Copy the files to their respective places:
C:WINDOWS(WINNT)\INF\netatlk.inf
C:WINDOWS(WINNT)\SYSTEM32\DRIVERS\sfmatalk.sys
C:WINDOWS(WINNT)\SYSTEM32\sfmatmsg.dll
C:WINDOWS(WINNT)\SYSTEM32\sfmmon.dll
C:WINDOWS(WINNT)\SYSTEM32\sfmwshat.dll
C:WINDOWS(WINNT)\SYSTEM32\SPOOL\PRTPROCS\W32X86\sfmpsprt.dll
AppleTalk Protocol should now be available under the list of Protocols you can add in Network Connections - Local Area Connections Properties
This is only good using AppleTalk printers attached to the network. The AppleTalk printer will show up, if it's turned on, under Add Printer-Local printer attached to this computer - create a new port - AppleTalk Printing devices.
For more info see: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/s agadd_appletalkport.mspx (you do not need to capture the port for the printer to work)
If you can not get access to these files, make your email address visable in your user profile and I will send them to you."

Ive got an HP Officejet 4500 Printer,i cant find it on my IPAD Airprint?

Hello guys! Ive got a HP Officejet 4500 Printer it has wireless on it...I already set it up on the same NETWORK CONNECTION than my router...I connected my printer to my Router...But now I cant connect it to my Ipad I tried on PAGES APP IN IPAD but i cant find it How to find it please help me ! THANKS A LOT FOR YOUR HELP

Have you checked the available list of supported printers to make sure this printer is supported by AirPrint?

How do you use an outside Lab ICC Printer Profile in PSE 12?

I have an image that I scanned in from an old print then I edited it using PSE-12. Now that I've completed the editing and retouching I plan to have the image printed by an outside that has the ability to read ICC Printer Profiles designed for their printers embedded in the image. My proble is I don't know how to add a particular ICC Printer Profile to a image worked on in PSE-12. If I was using Lightroom or PS-CS5 or 6 there is a straight forward way to accomplish this goal.
Is there any way to accomplish the same objective when using PSE-12?

Thanks MichelBParis. I must be getting old (I'm 78) and I completely missed that when I was in Dry Creek Photo. In fact that is where I get all of my ICC Printer Profiles from when I'm using either Lightroom or Photoshop CS. What I'm doing is tutoring a friend on the use of PSE-12 (although I do own a copy for my own use) and I was trying to set him up to use ICC Printer Profiles and avoid letting the labs do "Automatic Color Adjust). I had many images ruined in the past just because the lab did an automatic color adjust until an operator schooled me on what was happening. I'm now a part time photographer and I never send an image to be printed without first making sure I have an applicable ICC Printer Profile embedded. and request the lab to turn off their automatic color adjustment.
Thanks again for the perfect solution.

Device Manager reported driver missing for Officejet 7310 printer

I used the full-feature install software downloaded from HP site to setup an Officejet 7310 printer on a Lenovo T540p laptop with Windows 8.1 64-bit OS. The install and the printer appear to work correctly as I can print and I can also scan from the HP Solution Center utility. However, the Device Manager reports two errors/anomolies as follows.
Under the "Multifunction adapters" entry the Officejet 7300 series Properties shows the Device Status as:
This device is disabled. (Code 22)
Click Enable Device to enable this device.
Under the "Other devices" entry theOfficejet 7300 series Properties shows the Device Status as:
The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
To find a driver for this device, click Update Driver.
I find this a bit baffling as I believe the install software is supposed to include the driver(s), plus the printer seems to function (which could be due to default Microsoft drivers).
Any thoughts on how things got in this state and how to recover would be deeply appreciated as I prefer to not "ignore" the error messages.
Thanks,
Glenn
This question was solved.
View Solution.

Yes I was able to remove the USB instance and rename the network-connected printer instance as the sole printer. I thought that should work, but I was a bit paranoid given the other weird things that happened with the package install.
I'm good to go; thanks again.
Glenn

Print profiles no longer working correctly with CS6 64bit to my Epson R2880

Hi, until recently, my print profiles were working correctly with CS6 64bit (Win 7 ultimate 64) to my Epson R2880, they now print washed out/desaturated but the same profiles still print correctly using Lightroom 4. has there been an update that could have affected things or are there any other suggestion? Thanks, Dave.

Hi,
I hope someone can help!
I recently bought my first Mac, a great MacBook Pro which I love!
I use Lightroom3 and Photoshop CS5 to edit photos and now want to print from my Epson R1800.
I found that the prints initially came off very dark & contrasty, so I calibrated both the MBP screen and my Samsung SuncMaster 245B monitor with my Spyder2 and the Colorvision software.
Even after establishing colour profiles for both screens, the printed image was still far darker and "heavier" than that shown on screen. This was the same whether printing from LR3 or from the Mac Preview app (it was worth trying I thought!).
So searching for help on the web I came across this thread and now wonder whether I should uninstall my driver (6.57) and reinstall the printer with 6.23.
Stephen did you find that this worked - did PS CS5 behave after that?
Of course I'm trying to print some work soon and in desperation could adjust every (edited) image by brightening & reducing contrast, however with dozens to print it seems crazy to do that, not to mention wrong!
Thanks for any help!
Paul

Can't scan as a pdf from my hp officejet 4500 printer

Can't scan as a pdf from my hp officejet 4500 printer
I have windows 7 professional... please help

Hey Patricia Davis,
Firstly, please clarify whether you are trying to use scanner or printer option as both are different.
What exactly are you trying to do with your document? Do you face the same issue with all documents or any specific one?
Is there any error message that prompts on your screen?
Let me know.
Regards,
Anubha

How do I print standard 6 3/4" standard size envelopes from an hp 8600 officejet pro printer?

How do I print 6 3/4" standard size envelopes from an hp 8600 officejet pro printer. This printer has this size on the tray and has this size listed in the printer set up on the printer, but the drop down boxes from my computer to set up the printer do not have this standard size listed. I keep getting messages on my printer that it is not set for the right size. I have a list of supported envelopes and their numbers for this printer but which one of these other numbers is the same as the 6 3/4" standard size envelope. I have an operating system of windows 7 with an older version of publisher. Everything else prints ok from publisher & the printer, just not the standard size envelopes of 6 3/4".
Please help!
indy-girl

Hi indy-girl,
Welcome to the HP Support Forums! I see you are trying to print 6 3/4" envelopes from your HP Officejet Pro 8600, but keep getting an error 'printer that it is not set for the right size'. After taking a look at the Supported envelopes sizes, the 6 3/4 is not supported. See below:
I was able to take a look at the 8600, the only thing I am seeing listed on the paper tray is Legal/Letter, and the 4x6". I am not seeing the 6 3/4 size.
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Connecting to a HP Officejet 7610 printer when using a Mac running OSX 10.5.8

Connecting to a HP Officejet 7610 printer when using a Mac running OSX 10.5.8

Did you download & install the 10.5.8 driver?
http://www.hp4driver.com/2015/01/hp-officejet-7610-driver-download.html

HP Officejet 4500 = Printing problem

Hello,
I have an HP Officejet 4500. When I run a printing test, it prints out fine so it does not appear to be an ink problem or connection issue. But when I try to print out a document from my computer, the paper feeds through but does not print.
Any ideas?

Hi Perplexed99,
Welcome to the HP Support Forums. I gather that when sending a print job to your Officejet 4500 printer that the printer only prints blank pages.
I’ve included the Troubleshooting Print Quality document. I know you said the test page seemed to print fine but please follow the steps in this document. If that doesn’t assist you, please also Try the HP Print and Scan Doctor for Windows. You can find the download for the Print And Scan Doctor at hp.com/go/tools.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP Officejet wont print in black and white!

I have had an HP OfficeJet 6600 printer for a couple of years now and it has shocked me how many times I have had to replace color cartridges that I really never use. I am a high school teacher who does a lot of work from home and I only need to print in black and white, yet I am not permitted to do that because everytime a color runs out, I cant use my printer AT ALL. This comes off as a scheme for HP to make more money because everytime this message comes up, I am offered the oppurtunity to buy color cartridges at a high price. I will never be buying another hp product again!

HP and other printer manufacturers have different printer technologies for different needs. For inkjet printers:
Some have printheads built into the ink cartridges. These printers can typically print with one or more of the colors completely empty, or even with color or black (but not both) cartridges removed. The Officejet 8040a is an example.
Other printers have separate ink supplies and replaceable printheads. An example would be the Officejet 6600 printer. The printhead in these printers can be replaced if they are damaged by running the printhead with colors out. Some of these printers will allow printing with a color out, other will not. If the printer is run without ink in one or more colors the printer may be damaged, but the user may be able to recover without having to send the printer for service.
Other printers have permanent printheads. To run these without some ink in all the colors would risk causing damage to the printhead due to clogs, air ingested in the printhead or burned out printhead firing resistors. The Officejet 6700 is an example of this type of printer. For printers with fixed printheads this could require service to get the printer to print properly again when the ink is finally replaced.
The document here describes how ink is used. While the document is written for HP Inkjet printers the same principles apply to inkjet printers from other manufacturers.
If you never print in color a laser printer would likely be a better choice. If you occasionally print color but mostly black an IPH printer like those in the first category above may be a good choice.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How do I change an hp officejet j6400 printer change from color to black and white? I have a Mac 10.8 OX system

How do I change an hp officejet j6400 printer change from color to black and white?
I have a Mac 10.8 OX system

Hi JasperNM,
You may access a card within the cart reader by mapping a network drive to access it, then you may transfer the fies to your Mac.
First locate the printer IP address as following:
Follow these steps to print a Wireless Network Test Report, the IP address will be listed within that report:
On the control panel, press the Setup button ( ).
Press the Right Arrow button ( ) to scroll to Network Setup , and then press the OK button.
Press the OK button to select Print Network Settings .
Press the Right Arrow button ( ) to scroll to Wireless Test Report , and then press the OK button. The Wireless Network Test Report prints.
Now map a network driver by following the steps below:
Click the Finder icon on your Mac.
Click the Go menu.
Click on Connect to Server.
In the Server Address field enter “smb://ipaddress of the printer” and click on Connect.
You will be prompted to enter the password. leave it as is and click on Connect.
The Memory card will be mounted as a disk in the Finder.
Shlomi

HP Officejet L7555 Printer Profile

Similar Messages

Maybe you are looking for