HP Officejet Pro 276dw MFP - can't connect with the printer driver (but web browser works)

Hi,
I used to own an 8500 pro which got replaced by the 276dw due to HW malfunctioning of the old model. I installed the driver (full set, win 8.1 64 bit) from the HP download area over the installed printer. I can access the printer using it's IP address. Ipad Airprint works well. The only problem is that I can't get the printer driver to connect to the printer, but the printer driver displays the printer with the correct address. Print and Scan doctor detects incomplete install and download 184MB, one bit at a time ... it will take more than an hour.
I believe - due to a message that something needs to be stopped during the install (in order to get rid of the SW for the old printer) - that this thing is stil stopped, and I need to restart that (or if it is a service I need to reset it to automatic start).
Any idea anyone?
Thanks and with best regards,
Holger

update: The Print and Scan doctor did not help, but I finally added the printer using the default windows method. So I can print, but scan to PC obviously doesn't work, and neither does the Fax printer. Help still appreciated.

Similar Messages

HP Officejet Pro 8600+ "There is a problem with the printer or ink system..."

I have an HP Officejet Pro 8600+ that is coming up with an error message. This just happened out of the blue yesterday. The printer is just over a year old.
It says:
"There is a problem with the printer or ink system. Print head missing not detected incorectly installed or incompatable"
I have removed and reinstalled ink cartridges, the head, unplugged, cleaned, etc. etc.
HP Officejet Pro 8600+
Product Number CM750A
Serial Number {Content Removed}
Not under warranty
Please advise.
This question was solved.
View Solution.

Sorry that you are experiencing this problem. Here is a link that may assist you with the ink system.
http://goo.gl/BXDFf
It seems to be a bad print head, or it needs manually cleaned with lint free cloth and water. If these steps do not resolve the issue, contact HP Support (1800-474-6836).
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Re: HP Officejet Pro 8600+ "There is a problem with the printer or ink system..."

I've had mine for a year and a half. All new cartridges. Called HP - they said I probably need a new printer, of course.
I have an Office Depot guarantee that's still good and an HP warrenty that's good until 2017 - that's how paranoid I am about HP - but both want me to send the printer back. This will take weeks. I am so leery of HP Printers, I kept the box behind my couch since July, 2013!
What printer should I go for next? I noticed HP is not selling the 8600 anymore. I've bought printers EVERY TWO YEARS since 1999. Epson sucks, Brother sucks. HP ink is outrageously expensive. Any ideas?

Thanks for asking, Bob. Prepare for my screed: Saturday night, I was on the phone with an HP tech, Andre. After an HOUR, he told me he'd have to transfer me to another support team which he couldn't access because HP was updating. He said the update would take EIGHT hours. I called back to get another opinion, and that guy said only TWO hours for the update, call back at 9 a.m. EST. I called and was told SIX more hours to go, so Andre was correct. Andre said he would call me back at 6 p.m. EST. He did not call, but when I called HP and asked for a supervisor, he told me that Andre had called me at 12 p.m. Sunday afternoon. He lied. I have caller ID on my phone and on my TV. No call from Andre.
The supervisor then transferred me to "one of his best people, she went to college." Okay, he was right, Ann was exceptional, but she made me do everything I had already done six times: unplug, take out the cartridges, take out the whole printer head, put them back in - nothing. She said that HP could send me a new printer by the next morning, which I thought was very optimistic, but things were looking up UNTIL she transferred me to Cindy who said NO NEW PRINTER just the printer part. I said I had three more years on my warrenty which cost me $47.00 and I WANTED A NEW PRINTER BECAUSE THE 8600 IS A CRAPPY MACHINE THAT HP DOES NOT EVEN SELL ANYMORE AND THERE ARE NO LESS THAN 55 COMPLAINTS ON THE HP FORUM. There was smoke coming out of my ears, I'm sure.
Cindy stuck to her guns and I asked for HER supervisor, but that person/department doesn't work on Sunday. So, I have to call back after 8 a.m. EST Monday. I will NOT accept any offer except an ENTIRE NEW PRINTER. I paid $25 for a warrantee from Office Depot, which is where I bought the 8600. They went out of business - just across the street and joined another company. They are now Office Max and the closest store is an hour from home. So, I have paid over $70 in warrantee fees and I'm not accepting just a part that might last only a year or so like this one did. How do they know that the printer itself isn't ruining the printer head? They don't. I also asked for all new ink. There $100 worth of ink in this piece of crap and I don't want to lay out another $100 to replace it.
I've had two PCs since 1999, but this is the FOURTH HP printer that has pooped the bed. I got an Epson when I bought my Dell PC in 1999, which I replaced with an HP. I bought a new HP PC in 2011 and I've been through THREE HPs and ONE Brother. I got an HP printer THREE times for this PC. When I did my due diligence, I saw that the HP 8600 was selling in some stores for $300, so I thought I was set with this machine. I turned in my old, dead HP to Office Depot, got credit, which I put into this machine. That was in July 2013. What a scam these people have going. This is called PLANNED OBSOLESCENCE, and the public is aware. I HAVE HAD IT!

How do I uinstall Yosemite? It's not compatible with my older MacBook Pro, and I can't connect to my printer or use safari

How do I uninstall Yosemite? It's not compatible with my older MacBook Pro and I can't connect to my printer or access Safari

How to Downgrade OS X Yosemite Back to OS X Mavericks

HT4356 I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?

I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?

Have you tried restarting the printer? Reboot the iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

How can I connect with the AspNetUsers table in MVC 5?

I have a model, in which I have used several foreign keys from other tables. The point is that I also need to get the Id of the user, from the AspNetUsers table, though, I don't know how. I have done something like this, but it doesn't seem to be working:
public class Message
public int MessageID { get; set; }
[Required(ErrorMessage="Please type a message to submit")]
[DataType(DataType.MultilineText)]
[Display(Name="Message")]
public string MessageText { get; set; }
public DateTime WrittenOn { get; set; }
[Required(ErrorMessage="Please select a ticket")]
[ForeignKey("Ticket")]
[Display(Name="Ticket")]
public int TicketID { get; set; }
public virtual Ticket Ticket { get; set; }
[Required(ErrorMessage = "Please select a business")]
[ForeignKey("Business")]
[Display(Name = "Business")]
public int BusinessID { get; set; }
public virtual Business Business { get; set; }
[Required(ErrorMessage = "Please select a user")]
[ForeignKey("aspnetusers")]
[Display(Name = "User")]
public int Id { get; set; }
public virtual ApplicationUser ApplicationUser { get; set; }
When I try to create a controller using the Entity Framework with my model, I get an error message saying:
The ForeignKeyAttribute on property 'Id' on type ... is not valid. The navigation property 'aspnetusers' was not found on the dependent type ... The Name value should be a valid navigation property name.
If someone could help me solve the problem, I would be glad.

Hi Toni,
I see that this particular query is been answered in the following thread.
http://stackoverflow.com/questions/25372436/how-can-i-connect-with-the-aspnetusers-table-in-mvc-5
You can also refer the following links, hope this helps.
http://stackoverflow.com/questions/20071282/aspnet-identity-and-mvc5
http://blogs.msdn.com/b/webdev/archive/2013/10/16/customizing-profile-information-in-asp-net-identity-in-vs-2013-templates.aspx
Regards,
Bharath

Itunes can`t connect with the ipad because it is blocked with a code

the thing is the following . I bought an Ipad and they connected it to the computer without synicing it with itunes so I could use it. I used it for a while and inserted a password. After using it I turned it off and when I got home it appears " Itunes can´t connect with the ipad because it is blocked with a code. Insert the code in the ipad to use it with itunes." The point is that I can´t even use it because it says to insert the password and the ipad says that I have to connect it to itunes so no password can be inserted so I can´t use my ipad

You need to start all over from the beginning. After connecting your iPad to the computer, look in iTunes for instructions how to "Restore as new."

HT1369 why is my ipod can not connect with the i tunes store and can not sync

Dear apple,
Please kindly help me because my ipod can not connect with the i tunes store and can not sync either

Follow through: iTunes for Windows: Device Connectivity Tests
That link, also contains other links that may be related to your problem and/or to your solution.
Hope this helps.

Itunes can not connect with the Itunes store

Every time I try to connect to the ITunes Store an error pops up : Itunes can not connect with the Itunes store. I have downloaded the updated software and have access to the internet. Anyone ever run into this problem?

If it still has problems after trying the steps above, try resetting Winsock. It looks like it worked for a few people in this thread -> With iTunes 10.4 I can access iTunes store.
MTG68 wrote - In windows 7, click on your start menu, go to accessories, right click on the command prompt icon and choose "run as administrator". Once it opens, type in the following command...
netsh winsock reset
hit enter and it should say something like winsock reset successful now reboot your computer.

Acrobat can not connect with the email program, what can I do?

Acrobat can not connect with the email program, what can I do?

Hello,
I'm sorry you're having trouble; unfortunately, I'm not sure I understand what's going wrong. Would you mind giving me more details about what you're trying to do and what the problem appears to be?
Just in case you're using the desktop version of Acrobat and not Acrobat.com (which is the forum to which you posted your question), here's a link to their forum so you can repost your question there:
http://forums.adobe.com/community/acrobat
Thank you!

HT5085 hi, i bought itunes match yesterday, and i can not connect with the server. Error 4010 appear ever time when i want to entry on Itunes match.Thanks

i bought itunes match yesterday and i can not connect with the server. Error 4010 appear every tiem when i want to entry on itunes match.
Thanks

Here are some things to try:
Close itunes
Check your internet settings.
Control Panel – Internet Options – Advanced
Check SSL 3.0 and TLS 1.0
Uncheck “Check for server certificate revocation (requires restart)”
Click Apply
Click Okay
Open itunes and try again
And, you don't need to turn off the firewall, just add itunes and itunes helper to your security software firewall.

I downloaded the new iOS6 and now I can not connect with the iTune or App stores. My wi-fi works.

I downloaded the new iOS6 update to my 4s and now I can not connect with the iTune or App store. How do I fix it? My Wi-Fi works fine.

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

NVIDIA OpenGL driver lost connection with the display driver

Alienware M14x Laptop
Windows 7-pre 64-bit
8gb ram
3gb Video: NVIDIA GeForce GT 555M
Intel i7 2760QM
AE CS4
AE keeps crashing. I get the following message while doing something as simple as scrubbing through the timeline, or changing opacity of a layer. in 1080p, I have a picture layer, a solid, some color corrections, and that's it. i just got this new computer and i have never had this problem on my old computer.
this message appears after AE crashes."The NVIDIA OpenGL driver lost connection with the display driver and is unable to continue. The application must close."
this message appears in the taskbar: "Display driver stopped responding and has recovered. Display driver NVIDIA Windows kernel Mode Driver, Version 267.21 stopped responding and has successfully recovered"
any ideas on how to stop AE from causing my display driver to stop working?
Thanks, Ramzi Rebeiz

For anyone picking up this thread (it's probably too late for rrebeiz40 by now!) I have come across a simple but apparently very effective tip that has solved the 'OpenGL driver lost connection' issue for many people using various NVIDIA with various Adobe progs (incidentally a lot of these seem to crop up on Dell machines, especially Notebooks).
(It fixed my issue with Premiere Pro CS4 - GeForce GT 555M on Win 7 Ultimate 64-bit, Dell XPSL702X).
It's posted on http://forum-archive.developer.nvidia.com/index.php?showtopic=5331&st=40 (look for the last post, No 50) as follows:
THIS FIX APPEARS TO WORK...found on an Adobe forum
"This issue led me to this fix: go to NVIDIA Control Panel --> Manage 3D Settings --> Global Settings, and switch "Power Management Mode" to "Prefer Maximum Performance" (the default "Adaptive" setting seemed to be the culprit). And that's it! The key here is changing the "Global" setting, as my individual programs were already set to "Prefer Maximum Performance." I can cause the error to reoccur by changing back to "Adaptive."
Otherwise lots more ideas on this site: http://www.instructables.com/id/How-to-Fix...Nvlddmkm-Error/
My PC has been running for 2 days now. I only put the top fix in for now. Feel happier I have more options if need be though.
Inserted from <http://forum-archive.developer.nvidia.com/index.php?showtopic=5331&st=40>
It worked for me

JDBC receiver error Cannot establish connection with the registered driver

Hi Expert,
I am constructing a proxy to JDBC scenario. And I am getting error saying "
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error when attempting to get processing resources: com.sap.aii.af.lib.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection with the registered driver. oracle.jdbc.driver.OracleDriver returns: The Network Adapter could not establish the connection. : SQLException: The Network Adapter could not establish the connection"
I can get into my Oracle database using TOAD with same IP address, user name and password. Could anybody tell me what should I do? Thanks a lot!
Charles

Hi,
Check with your network team, network conenction between PI and Data base not working , Network team have to open Data base system ports inorder connect PI System.
check with Basis team about network connectivty,like they are bale to ping Data base server ip or not.
please go through below thread,
SQLException: Io exception: The Network Adapter could not establish the con
regards,
ganesh.

Time Machine will not let me restore from recent backups. I can see them on the external drive but will not restore sooner that June of 2013! Any suggestions?

Time Machine will not let me restore from recent backups. I can see them on the external drive but will not restore sooner that June of 2013! Any suggestions?

All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

HP Officejet Pro 276dw MFP - can't connect with the printer driver (but web browser works)

Similar Messages

Maybe you are looking for