Hp officejet pro 8100 and it does not print bar codes from UPS or USPS

have an hp officejet pro 8100 and it does not print bar codes from UPS or USPS.  Can you please please help? i have used my ipad, by HP G62-355DX Notebook and neither will give me printed bar codes.  The balance of the mailing label do print, just not the bar code.  It may be my imagination, by I believe it used to print thebar codes.

Hi,
Try adding an alternate driver and try to print.
To use an alternate print driver for HP printers in Windows 7:
1. Click on the Start menu.
2. Click on Devices and Printers.
3. Click Add a Printer
4. Add a local Printer
5. Select Create a New Port
6. Select Standard TCP\IP port
7. Enter Printer IP address (Printer IP address can be found by printing network config page from printer
8. Under Manufacturer select HP and under printer select HP Officejet 8000 pirinter or Officejet 7410
9. Click apply and try printing
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • HP Officejet Pro 8500 Cyan ink will not print. installed a new one, but no success

    HP Officejet Pro 8500   Cyan ink will not print. installed a new one, but no success

    I had to replace both printheads about $85 a piece.  It may be more cost effective to buy a new printer.  Once I replaced the one printhead, the other one went out.  It is common and it did solve the issue.  I really like my printer and if it gets me another year or so, I think it was worth it.

  • I have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

    i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

    Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
    Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/

  • Have an HP Officejet Pro 8500 Wireless. Trying to print to it from my iPad2. Having some problems.

    I Have an HP Officejet Pro 8500 Wireless. Trying to print to it from my iPad2. Having some problems. Trying to print docs or files from the iPad usuall gets me a page that looks scrunched up to one side. Is there a good printer app (preferably free or shareware) that I could get or is there a patch, new driver, new firmware or something for the 8500 that would allow good printing fro the iPad wirelessly?

    The latest firmware version for your printer is DLM1FN1006BR; you can verify yours by printing out a self test page via the front panel of your printer. 
    Also, the HP ePrint Home & Biz app supports printing over your local wireless network, so please verify if your printer is connected to the same access point as your iPad2.  You are also able to verify connectivity by typing your printer's ip address within the address bar of your safari web browser.
    Say "Thanks" by clicking the blue Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"; therefore, it's easier for others to find.
    I am an HP employee.

  • Problems with officejet pro 8100 and Lion?

    I just bought a new HP Officejet Pro 8100 Wireless and I have not been able to get it to work correctly.  It's hooked up and all the software seems to work but it prints very, very slowly.  It takes about 2 minutes to print a color page.  Is there some known problem with OJPRO8100s and Macs with OS X Lion on them?  I downloaded v12.14.0 of the printer package from HP, uninstalled what came with the printer, and installed the latest and greatest.  Didn't make a bit of difference.

    Officejet Pro 8500a extremely slow printing with Lion Mac OSX 10.7
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officejet-Pro-8500 a-extremely-slow-printing-with-Lion-Mac-OSX-10/td-p/1030521

  • HP Officejet Pro 8100 unable to communicate with printer, but still prints

    Hello,
    I have an Officejet Pro 8100 connected to a Windows XP SP3 computer via USB.  
    When installing  I downloaded the latest drivers off the HP webiste and followed the instructions for installing the printer and connecting via USB.  While installing I only installed the basic print driver.
    The printer appeared to install correctly.
    When printing (test page, or from other programs such as Word or Excell), the printer will actually print the requested document, however, an error box will pop up saying "Unable to communicate with printer".  The only option on the error box is the cancel the current print job.
    Before cancelling the print job, even though the printer actually printed the document, I can still see the document in the print queue until I click the "Cancel" button on the error box.
    I have deleted the printer, uninstalled and reinstalled twice, but the issue persists.
    Any ideas?

    Hi aconway,
    I hate to hear you are having issues.  This could be caused by a port issue, bad USB cable/hub/switch connection, or possibly a spooler or driver issue.  Click Here to run the print and scan doctor (select OS, then click the + sign beside utility diagnostic tools, click the download button next to print and scan doctor). If you would like to learn more about your product, Click Here. 
    Suggestions:
    1. Run the print and scan doctor to identify any port issues
    2. Connect unit directly to PC with new USB cable that meets specifications(no longer than 4-6ft). 
    3. Remove any hubs or switches if being used.  
    Hope this helps!
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    I work for HP.

  • My HP Officejet 4315 All-in-One does not print

    My HP Officejet 4315 All-In-One printer does not print althoug it is connected to my laptop and working properly
    The dial shows the word FAX instead of PRINT.  How can I remove the word FAX? because I think this is the prolem
    Any one with info pls email me at:[edited email by moderator]  Thanks,  pedrodomenech

    Hello  @pedrodomenech , and welcome to the HP Forums, I hope you enjoy your experience!
    I can see you're running into fax/print issues.
    I would love to help with that, but I need a little information to try and help you first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please let me know what you find.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • My HP 309a all in one printer will not print bar codes like airline boarding passes or tickets.

    I use Windows 7 with XP Pro I have received no error messages and have plenty of free disc space. I have not a clue as to what has happened. I see the ticket with a bar code on my computer screen but when I  try to print it the bad code will not print. Any suggestions?

    my hp6980 printer won't print bar codes using windows 7 on computer

  • OfficeJet Pro 8600 Plus Wireless DOES NOT WORK with Mac Mavericks Based Network

    Replaced my Brother system with the HP OfficeJet Pro 8600 Plus yesterday.  There are many positive features of the 8600 Plus that prompted me to purchase it...
    Modular Design
    Large legal sized Scanner
    Standard/Legal Paper Printer
    Copy
    E Print Capability
    High Yield / Affordable Toner Replacements
    Unfortunately, I discovered the Wireless network capability is less than desirable.  After hours of installing, reinstalling, work arounds, internet solution searches, it just will not work.  If you are able to get the printer to work on your network (with router), the scanner will not be visible, vice versa, etc...etc...etc...
    HOWEVER, I did discover this solution.  If the unit is near your base computer, install it to your computer with a usb connection.  That allows you to have scanning and printing from that unit.  Then you can connect the unit through its ethernet connection to your router.  From there all computers can print within your network.  It's not the best way to connect a WIRELESS printer, but at least it works.
    I'm not certain why HP and Apple can't find a solution, but I never found anything on the net that worked.  The problem seems to stem from the new Mavericks update from Apple, but I'm really not sure.  I wasted an entire day of productivity attempting to make it work.  I'm posting this so you don't make the same mistake.  If you happen to know a verified solution, then I would welcome the information.  Best of luck!!!

    It may be a mac driver issue. Try installing the bootcamp update for your version of vista from here:
    http://www.apple.com/support/bootcamp/
    I'm not sure if this is supposed to work since I've never tried mac hardware at 5ghz on windows before...

  • Officejet Pro L7590 Scan feature does not work after power failure!

    Hello guys,
    I have an L7590 set up as a wired network printer through a netgear router. I am running Windows Xp. I installed the printer and everithing was working fine, but whenever there is a power outage the printer scanner does not see the computer. I am able to print from the computer but the twain feature is the only thing affected. I checked the router "Attached devices" and the printer is listed. The only way that I have being able to repair the problem is doing a complete uninstall and reinstalling the printer software again. Does anybody knows why this happpens or how to fix it? thanks a lot.

    I am having a very similar problem.  Everything will be working fine, and then one day the scan function will not work.  It will print fine but it wont scan.  It locks up my computer and then I have to reinstall.  Now it has happened and I cant get it to work even after a reinstall.  Printer works fine, but scanning wont work.  I am able to ping the printer and nothing has changed on my computer.  I am lost with this one.  I hope someone is able to answer this.

  • Im having trouble restoring my MacBook Pro, "Comand" and R does not seem to be working for me.

    Everytime i try to restore it, it opens normaly to log it with a pop up window saying my start up disc is full. When i log in, my desk top is missing along with my personal wallpaper. Cant seem to do anything when i log in and i really need my comouter for work, someone please help. Just want to restore it.

    1. System Preference > Sound > Output
       "Settings for the selected device"
       Is the pointer for "Balance" set in the middle?
    2. Try to push the headphone a bit more into the port.
    3. Reset PRAM. http://support.apple.com/kb/PH4405
    4. Reset SMC.   http://support.apple.com/kb/HT3964
    5. If any of these steps does not help, contact Apple.
    Best.

  • Officejet pro 8000 and HP Home & Biz print app

    I have an Officejet Pro 8000 wireless that, according to HP's list, is compatible with the HP Home & Biz print app for the iPad 2.  However, the app does not find any printers on the wifi network.  I am running Win 7 and the printer is shared and works fine with printing wirelessly from the computer.  I followed the steps in the app to auto find any printer connected to the wifi, but it does not find anything at all.  The way I understand the app, it allows non-eprint capable printers to print using the app.  Am I missing something? 

    Hi,
    As you have mentioned the printer is shared from Windows 7, is the printer connected to the PC by USB?
    In order to use the HP ePrint Home & Biz, the printer must be connected to your router by ethernet cable and then the up should detect it.
    Please make sure both the iPad and the printer connected to your network.
    Follow the steps below to access the printer EWS page:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01554589&cc=us&dlc=en&lc=en&product=3762364&tmp...
    Once locating the printer IP address, type it into Safari.
    Can you access the page?
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Acrobat X Pro does not print Excel charts from 2010 Word doc to PDF correctly

    Hi,
    I am trying to create a PDF from Word 2010 using Adobe Acrobat X and preserve hyperlinks but when I go through the PDF maker toolbar, the Excel charts in the Word file do not print correctly. They come up as large white boxes with a small grey arrow icon in the lower-right corner (looks like a "play" button). Does anyone know why this is and if there's a solution to this problem? Is there an update or a fix? I have a lot of Excel charts in the Word file...
    Thanks in adavance,
    Kika

    Hello,
    i am having exactly the same issue with Acrobat X Pro - with linked Excel 2010 tables in Word 2010.
    Has there been a resolution to this eissue - it is potentially very time consuming to work around this issue for me.
    I would post my files but I don't know how to attach them to the thread - only my second post .
    Cheers,
    slobbering_dog
    This is the Word File - the table is an Excel 2010 spreadsheet linked (via Paste Special >Link) .
    This is the resultant PDF file:
    Thanks in advance - again !!
    Message was edited by: slobbering_dog_72

  • Hp officejet pro 8610 windows 8 will not print off web

    Hi,I have an HP  Office jet Pro 8610 for about 7 months ,had to replace the printer head about 2 or 3 months in ,but it worked great.Now my printer will not print from the web,It will print  from notepad and will print test pages just fine.It has printed from the web earlier today,it just stopped ,It will go to the print screen and just continue saying  "loading preview" and nothing happens . I even left it up hoping it was just "competing " with other programs but my google chrome crashed ,Not sure if was  printer related or not , here are the  specs and  info about computer and printer  then the steps I already took
    laptop is an hp pavilion 64 - bit operating system windows 8
    printer hp office jet pro 8610 {print fax scan web}
    using google chrome
    1.turned off printer unplugged all cables and from outlet
    2.restarted  computer
     3.did the troubleshoot
    4.forgot printer and re installed 
    5.uninstalled printer totally and re installed{ using USB connection}
    6.printed test page successful printed
    7.printed notepad paper successfully
    8.failed to print from google chrome.
    9.stopped printer spooling and restarted {was worth a try}
    10. uninstalled printer went to hp site allowed their hp installer to install printer wireless,printed test page successfully
    11.failed  to print from google chrome
    12.troubleshooted again said everything was working fine.
    13.searched forum and found nothing on this subject.
    any other information you need ask.I am not interested in mucking around with my register at all or making any changes to my laptop that is not common(had a laptop destroy hard drive from that kind of advice,,,never again}
    I'm hoping to get help to fix this as I use to print my business orders and this is he only printer I own ,other than these two problems (printer head ,hp replaced) I love this printer.Its fast and has good color 
    thanks awaiting help

    no one answered this questio for me or even gave me advice....
    I got it to print from explorer but not chrome .So for some reason it decided to stop printing from chrome all on its on.Not sure how long it ill print from ie but we'll see .thanks for no advice 

  • HP Laserjet Pro 200 color M251nw does not print font larger than 48 using Office WORD 2013

    If a create a new Word document and I type letters of 72 font, the letters do not print. If the font size is reduced to 48 then it prints. The brand new printer is connected to my laptop via USB. I'm using an HP Laptop Pro 7420s, 32 bit with MS Office H&B 2013. Any ideas as to what should I check? Thank you.
    This question was solved.
    View Solution.

    Hi,
    Install the latest firmware for the printer, that should address this type of issues.
    For a USB connection use the following tool:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=lj-108129-8&cc=us&dlc=en&lc=en​...
    For network connection follow these steps:
    http://support.hp.com/us-en/product/HP-LaserJet-Pr​o-200-color-Printer-M251nw/5097632/model/5097639/d​...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for

  • How can I add an e-mail address to my address book from an e-mail?

    Someone sends me an e-mail and I do not have their e-mail in my Thunderbird address book. Is there a way to enter their information into my address book without having to retype it all into my address book. In other e-mail programs that I have used,

  • IWeb pages not displaying images in Safari v312.6, Firefox or IE 5.2

    Ever since I started using iLife 08 and the new iWeb to create my online photo albums, some users of Firefox and one user of Safari v312.6 and IE 5.2 for Mac can't view the images on my pages. Can anyone tell me why? I realize there is a fix out ther

  • Defalut Document Type assignment for PR after MRP RUN

    Hi, I want to know we have 6 types  of different document types , i want to know after MRP RUN i want to assign a document type how to do setting for this  like for each plant i want to assign diffrent document  type after MRP RUN, also if we have no

  • Inbound delivery - transport group, field selection of.

    Hi Gurus, I have a requirement to enter the transport packing unit (as distinct from the order unit) in the inbound delivery header (VL31N) > unload > trans.group. But this field is presently greyed out. Could someone tell me how to make it active by

  • Initial load (R3AS). Number of blocks by object

    Hi Gurus, does anyone have information about the number of blocks for each object while executing the initial load with transaction R3AS? Regards Mikel