HP Officejet Pro 8100

The printer worked good today printing a apge from an online newspaper. When I try to print 4x6 photos from cp or Picasa i get "out of paper" message. I pressed the blinking light but no print.

Hi rondo62,
Welcome to the HP Support Forums.  I understand that when you try to print 4 x 6 photos you are getting an out-of-paper error message.
I have included the Loading and Printing on 102 x 152 mm (4 x 6 inch) Photo Paper document. It tells us that the photo paper must be loaded into Tray 1 and that Tray 2 is for plain paper only. It has a section dedicated to Windows users and another for Mac users.  Please click on your operating system and follow the instructions to get your photos printed.  
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

  • Can I print in black and white with an empty color cartridge on a HP Officejet Pro 8100 printer ?

    Only the cyan cartridge is empty, all of the other 3 cartridges are fine. I ordered the cyan cartridge online but I need to print important documents today. The power button is blinking when I try to print.
    I don't understand, black and white should not use a color cartridge to print.
    Is there a trick so I can print before receiving the cyan cartridge ?
    This question was solved.
    View Solution.

    The Officejet Pro 8100 ePrinter has the same print mechanism as its All-in-One counterpart the Officejet Pro 8600.  This printer has a printhead mechanism that contains 4 individual cartridges: CMYK (cyan/magenta/yellow/black).  
    One will have to replace the cartridge, if the unit provides a message of one of the colors being empty, before the unit will resume printing.  It is a maintenance mechanism to prevent the product from self-damage.  Hope this helps.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • More than one HP OfficeJet Pro 8100 printer

    Hi,
    I need to buy two wireless printers to use with an iPad.
    But the thing is: if I install TWO identical HP OfficeJet Pro 8100 under the same wifi network, how can I know which one I'll print? In other words, my concern is that when I'll want to print a document using the iPad it will show two printers, but both with the name "HP OfficeJet Pro 8100". Having in mind that each printer is located far from each other in my house, I need to print under the right printer.
    Is it possible to change the name that appear on AirPrint so I can distinguish both Printers? Something like "Printer-Studio" and "Printer-Bedroom"? Or something that works somehow...
    Thanks.
    This question was solved.
    View Solution.

    Pedrosacelso,
    No problem.
    Have a good weekend!

  • How can I get my HP Officejet Pro 8100 to work. I had HP  on the phone for over two hours and thought it was fixed. Now it just will not print at all.

    How can I get my HP Officejet Pro 8100 to work.
    I'm using an  iMac (21.5-inch, Late 2013) running Yosemite. I spent hours on the phone with HP who did their best and thought they had solved the problem Now it has stopped printing completely. Just says 'idle' or' connecting to printer' but never does.

    Greetings paulr.paulr,
    Welcome to the Apple Support Communities!
    I understand that you are unable to print from your Mac running Yosemite on your HP Officejet Pro 8100. I know that printer issues can be very frustrating, but I believe the information in the attached article will be able to assist you. I would suggest reading over and systematically working your way through the suggested troubleshooting steps located in the following article. If any issues arise as you work your way through the steps, or if you work your way completely to the end and reset the printing system and the issue continues, please let me know. 
    OS X Yosemite: Printing troubleshooting
    Cheers,
    Joe

  • I have hp officejet pro 8100

    Can you print in B & W when a color cartridge is out of ink? I have a HP Officejet Pro 8100. I had a large B&Q project and turned the printer on and Magenta was dead.  I could not find a way to print in B&W so I had to go out and buy a new cartridge.  Help
    This question was solved.
    View Solution.

    Sorry that you are having a problem with the ink cartridge.
    No, you will not be able to print without the color cartridges.
    The color cartridges mix together with the black to form a true black print.
    So you will need to replace the Magenta first, in order for the printer to finish processing.
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • Problems with officejet pro 8100 and Lion?

    I just bought a new HP Officejet Pro 8100 Wireless and I have not been able to get it to work correctly.  It's hooked up and all the software seems to work but it prints very, very slowly.  It takes about 2 minutes to print a color page.  Is there some known problem with OJPRO8100s and Macs with OS X Lion on them?  I downloaded v12.14.0 of the printer package from HP, uninstalled what came with the printer, and installed the latest and greatest.  Didn't make a bit of difference.

    Officejet Pro 8500a extremely slow printing with Lion Mac OSX 10.7
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officejet-Pro-8500 a-extremely-slow-printing-with-Lion-Mac-OSX-10/td-p/1030521

  • Can't HP Officejet pro 8100 do wifi access point?

    Yesterday my HP Officejet pro 8100 arrived and I try to connect via wifi. I thinked that It need a infrastructure access point to print via wifi.
    When I powered on the printer I osserved that It create an access point autonomously with SSID: HP-Setup-7A-Officejet Pro, with IPv4 address server, etc...
    I was very happy and I printed a page with my smartphone samsung s4 connected directly with printer access point (not wifi direct but standard wifi).
    Today no changed occurred but I can't use printer with its own access point, but only with an external wifi access point.
    Someone can help me, please? It could be an hardware problem?
    Thanks,
    Luca
    P.S. in web server I checked that "access point connectivity" (Punto di accesso wireless connettività in Italian) is checked.
    This question was solved.
    View Solution.

    Hello lucait
    To print via WiFi you need to have a wireless router setup. Once you have the wireless router setup correctly you will have a SSID and Wepkey that will enable you to add devices to your network. The network will allow all your devices to communicate not just with each other but with the internet. At the moment your printer was not put in a network so instead of broadcasting on a network it is broadcasting on it's own network called HP-Setup-7A-Officejet Pro which is only good for a short period of time to allow you to setup your wireless. I am going to assume you have a wireless network and you are just needing assistance getting the printer setup on that network.
    To set your printer up on a network you will need to reset your network defaults so your printer begins to broadcast that HP-Setup-7A-Officejet Pro network again. You can do this buy following the steps on the HP Support document Resetting the Network Settings. Once you have done this you can begin to install the software that came with your printer on your computer. You want to set the printer up wirelessly when the option arrives. The software should configure your printers wireless for you and put it on the network. Once completed you should be able to access your printer from all your devices as long as they are on the network. 
    I hope this helps resolve your wireless issue. Thank you for posting on the HP Forums. Have a great day! 
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • My HP Officejet Pro 8100 printer refuses to print in color

    My HP Officejet Pro 8100 printer refuses to print in color, I have a macbook OSX 10.7. for some reason it will not print in color and I do not know what to do. please help.

    Ctopkis, Make sure you have updated your firmware. Here is the link to the lastest firmware that was posted on 02-18-2012. 
    Firmware upgrade is for HP Officejet Pro 8100 ePrinter - N811a
    Post back and let me know if this fixes the issue or not.
    -Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • I would like to use my HP officejet pro 8600 and HP officejet pro 8100 for printing envelopes

    I would like to use my HP officejet pro 8600 and HP officejet pro 8100 for printing envelopes.

    Hi there cv4928,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using and what application will we be printing from?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Mac OSX 10.9 and HP Officejet Pro 8100 Compatibility

    Can we please get a driver for the HP Officejet Pro 8100 that is compatible with the Mac OSX 10.9? I bought the printer so that my roommate and I could share it to print wirelessly, but I am unable to do that without a compatible driver. Please develop one as soon as possible!
    Thanks!

    Hi,
    The Drivers are available via Apple Software Update,
    In order to configure it wirelessly you may use the HP Easy Wireless Install app.
    You may find a step by step guide in the following document:
    h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=4337543&spf_p.tpst...
    The app iself can be downloaded from the Mac App Store:
    https://itunes.apple.com/us/app/hp-easy-wireless-setup/id876495880?mt=12
    If you experience any issues while trying to locate the pritner during the wireless configuration. restoring the network defaults for the printer can be done by pressing and holding both the Cancel ( ), the Wireless ( ), and the Power ( ) buttons for three seconds.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Officejet Pro 8100 unable to communicate with printer, but still prints

    Hello,
    I have an Officejet Pro 8100 connected to a Windows XP SP3 computer via USB.  
    When installing  I downloaded the latest drivers off the HP webiste and followed the instructions for installing the printer and connecting via USB.  While installing I only installed the basic print driver.
    The printer appeared to install correctly.
    When printing (test page, or from other programs such as Word or Excell), the printer will actually print the requested document, however, an error box will pop up saying "Unable to communicate with printer".  The only option on the error box is the cancel the current print job.
    Before cancelling the print job, even though the printer actually printed the document, I can still see the document in the print queue until I click the "Cancel" button on the error box.
    I have deleted the printer, uninstalled and reinstalled twice, but the issue persists.
    Any ideas?

    Hi aconway,
    I hate to hear you are having issues.  This could be caused by a port issue, bad USB cable/hub/switch connection, or possibly a spooler or driver issue.  Click Here to run the print and scan doctor (select OS, then click the + sign beside utility diagnostic tools, click the download button next to print and scan doctor). If you would like to learn more about your product, Click Here. 
    Suggestions:
    1. Run the print and scan doctor to identify any port issues
    2. Connect unit directly to PC with new USB cable that meets specifications(no longer than 4-6ft). 
    3. Remove any hubs or switches if being used.  
    Hope this helps!
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    I work for HP.

  • HP Officejet Pro 8100 - Washed out blacks in images / Dark blacks in text prints???

    Here is my system: iMac Maverics OS, HP Officejet Pro 8100, Photoshop, Pages & Genuine inks.
    I print a text page (Black and various colours) from Pages/Text Edit or any other text program and the colours are deeply saturated, blacks are black and I'm totally happy.
    I print the exact same text, recreated in Photoshop, everything is washed out. Blacks are greyish, colours are pastel & it looks like it's been printed at 50% opacity.
    I saved my Photoshop text mock up as a .Jpg .TIF .BMP and tried printing them in Pages & Mac Preview - same washed out results as when I print direct from inside Photoshop.
    All my software is genuine, drivers are up to date. It's like HP use one process to print text and a whole other process to print images, **bleep** is going on???
    Please advise on how to fix, if anyone else is having or has had similar issues.....

    Hello @pA8100 , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you're experiencing Photoshop colour issues.  I would like to help.
    It is possible you need to adjust the colour settings in Photoshop from RGB to CKMY.
    I would recommend utilizing this article on How to Convert RGB to CMYK in Photoshop.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HP Officejet Pro 8100 not printing from PC

    Have a HP Officejet Pro 8100, suddenly stopped printing from PC, noticed base shaped  symbol showing up above ink display, on/off button also is flashing when print is requested, checked printer status stating there is an error. Using Microsoft office 2010

    Hello, 
    Please try the below steps..
    While the printer is ON, unplug the power cord from back of the printer.
    Wait for 30 seconds.
    Plug in the power cord to the printer.
    Wait for the printer to go silent.
    Remove and re-insert the ink cartridges.
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Hp officejet Pro 8100 Printer Tray

    I have an HP Officejet Pro 8100 printer. I removed the paper tray this morning to load paper and now I can't get it to slide back in all the way. It stops about 4 inches short of closing.  I feel like an idiot! How can I have problems sliding a drawer in?  Are there any clips etc. that I should have in place, etc. that might have come off?
    This question was solved.
    View Solution.

    Hi,
    You might try lifting the front of the printer to see if anything is obstructing from your desk.  It should slide right back in.
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am employed by HP

  • HP Officejet Pro 8100 - Not Printing

    New HP Officejet Pro 8100 - driver installed for wireless network printing.  
    Printed Test Results - "No Problems Found....successful setup of your wireless printer".
    However, when I try to print  I can see the request in the print screen, but it says "Print file was not accepted".  This is happening from the computer the driver was installed on (Mac OS X Ver 10.8.4.
    When I try from another iOS device, I can see the printer, and can request the print job, It says its sending to the printer, but the job never shows up in the print que and doesn't print.
    Help!!

    What router?  Have you restarted it?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP Officejet Pro 8100 - AirPrint - wireless

    My HP Officejet Pro 8100 had been working just fine with AirPrint, but then I changed my wireless router and I've forgotten how the printer was configured originally.
    I only use the 8100 with my apple iPhone 4S, it's not connected to any computer and I'm sure it was never connected to any computer when I originally installed it.
    Question is : how do I set it all up again from scratch? There's no 'set up' screen on the printer, so how is it done?
    I 'know' the printer has to 'connect' to my wireless router but how is it done without a computer connected ?
    My router is a BT Homehub4, and it works fine with my iPhone and ipad.
    Thanks in advance for advice - I have searched for info, but everything seems to point to a need to have a computer physically connected but I'm sure this wasn't the case originally - just switch on and AirPlay worked!
    Maybe I need to 'somehow' uninstall airplay on my iPhone?
    HELP!
    This question was solved.
    View Solution.

    Well, I'm going round in circles now....
    I press the WPS button on the BT Homehub 4 and a red colour icon on the front of the hub comes on and flashes for a few minutes.
    Meanwhile on the printer the blue wifi icon just flashes on and off.
    By pressing two buttons on the printer I've printed out a "HP Network Configuration page " which says WPS PIN (and a series of numbers) 'good for 5 minutes, blah blah blah'.
    Further down the sheet it does show the router listed with info - channel, privacy RSN WPA-PSK, encrypt AES/TKIP, signal -62, WPS Yes.
    But still no AirPrint print - and wireless status says 'disconnected', communication mode 'infrastructure', Network name (SSID) hpsetup.
    Blimey, this ain't easy is it!
    What next????
    Steve.

Maybe you are looking for