HP Officejet Pro 8500 Cyan ink will not print. installed a new one, but no success

I had to replace both printheads about $85 a piece. It may be more cost effective to buy a new printer. Once I replaced the one printhead, the other one went out. It is common and it did solve the issue. I really like my printer and if it gets me another year or so, I think it was worth it.

Similar Messages

Office Jet Pro 8500 Black ink will not print

black ink will not print and alignment fails. I have cleaned the print heads through all levels. The colors print perfectly but black will not print. I have reset the printer, run tests pages, but still no black ink and the unit trys to align, but fails. The unit is no longer in warranty.
This question was solved.
View Solution.

Hi mariajw,
Thank you for your reply!
What I would recommend to do at this time is to please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Best regards!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP OfficeJet Pro 8500 Wireless A909g Will not print or align

Not sure what the problem is: was printing fine till suddenly no ink on paper. Unit sounds like it's going through all the motions but lays no ink. Windows 7 home Pro 64bit. Error message: Alignment cancelled. I went through all the suggested steps...cleaned printheads number of times, all the steps for alignment. Did not replace the printheads yet. Could both go bad at the same exact moment? I get absolutly no ink on the paper, not a drop. Don't know if this is enough info. Hope so. Thanks in advance for any possible solutions.
LP

Hi SunWay,
I understand you no longer have any ink printing on your pages and can not complete an alignment. From your description, I can see you have done a great deal of troubleshooting. It is not all that likely that both printheads would go at the same time but it is entirely possible. Another possibility is that the ink supply tubes are kinked. Please follow these steps to check the ink supply tubes:
Open the printer lid. The carriage moves to the left side of the printer. Wait until the carriage is idle and silent.
Look in the center of the printer for the four ink tubes that connect to the printhead, and then examine the ink tubes. The ink tubes should be bundled neatly, and they should not appear kinked or bent.
Ink tubes, correctly bundled and not kinked
The above solution and more can be found in the following document. If the issue persists, please use the document to troubleshoot the issue.
If the issue continues to persist, I recommend calling HP and letting the know the issue as well as the steps you have already completed. It may be helpful to even let them know you completed all of the steps in HP document #c04261974.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Hp officejet pro 8500 a910 software will not open

I have had my printer installed for over 2 years on my laptop via the network (Dell with OS Win 8.1). Recently, as in I have no idea why or what happened, I have an issue where I cannot open the software on my computer to scan a document.
The icon on the desktop as well as under Programs > HP is "C:\Program Files\HP\HP Officejet Pro 8500 A910\Bin\HP Officejet Pro 8500 A910.exe" -Start UDCDevicePage
with a Start In of "C:\Program Files\HP\HP Officejet Pro 8500 A910\Bin\"
I suspected that the link was broken and opened the link in Windows Explorer and it would not open from there either. Also, the icon in Windows Explorer is nonspecific and does not look like an HP icon.
I tried uninstalling all HP software and reinstalling it, but am having the same issue. I cannot open the software.
Anyone have any ideas? Thank you!

Hi @SandraDee1961,
Welcome to the HP Forums!
I understand that your HP Officejet pro 8500 a910 software will not open on Windows 8.1. I am sorry to hear this, but happy to help you with this issue!
I would recommend the following steps:
Uninstall the software. Uninstalling the Printer Software.
Clean boot the computer. How to perform a clean boot in Windows.
Disable any antivirus programs. How to Disable Antivirus in Windows 8?
Disable any firewall programs. Windows Firewall from start to finish.
Create a new user account. Managing User Accounts and Logins (Windows 8).
Reinstall the software using the HP Printer Install Wizard for Windows.
Hope this works!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Officejet Pro 8500 Pro 8500 A910 black will not print, says printhead is OK

I have an HP OfficeJet Pro 8500 A910. It no longer prints black, even with a new toner cartridge. Have followed all procedures recommended to solve problem. Printhead diagnostics says black/yellow printhead is OK. Any suggestions?

Everything seems to move correctly, but just does not print. Occasionally it does print a faded incomplete print out more often in a blue. All carttridges are new HP solutions center does show filled ink in all stations. Using WIN XP. Printer had done well for about 3-4 yrs.

HP Officejet Pro 8500 A910 Premium will not fax from computer with Windows 8

My printer worked great on Win XP and I could fax directly from the printer or from the computer. I installed Windows 8 32 bit (I'm running an older system that works fine for everything I use it for -thank you very much), and downloaded the latest greatest HP driver & software for Win 8 32 bit. Everything works perfectly, except faxing from the computer.
If I run the fax test from the printer, the fax test PASSES. If I run the fax test from the computer, the fax test PASSES.
If I put documents in the printer feeder and use the printer fax functions, it faxes beautifully.
It is only when I fax from the computer, the screen pops up with a status of spooling, then the status turns to Cancelled every time.
It always worked on Win XP.
The FAX printer and FAX driver for the FAX printer showed up in Control Panel automatically when I installed the updated drivers/software from HP. All the properties on the FAX printer look good.
I tried a usb connection, and a network ethernet connection, with the same results.
Printing and scanning all work fine. I really like this printer, and I would like it even more if I could figure out how to get it to fax a document from the computer.
When I say fax from the computer, I mean opening a document, saying Print, selecting Fax - HP Officejet Pro 8500 A910, filling in the fax information page, selecting my cover page options, and pressing the send fax. All just like I used to do before I upgraded to Win 8. When I hit send fax, that is when I get the popup that the fax is spooling, then it goes to cancelled. No error codes are displayed, no clues as to why, no nothing. If I print the document and put it in the printer document feeder, I can fax it using the printer display screen no problem.
Very bizarre.
This question was solved.
View Solution.

Alright, I spoke with some of the engineers and they suggested the next few steps. First, here is a thread on an MS forum about removing a driver in an alternate fashion.
http://technet.microsoft.com/en-us/library/cc730875.aspx
Another thing to note is that in Win8 you can easily access the Command Prompt by hitting the windows key and typing “command prompt.”
Additionally, I will PM you some further steps on removing the vestiges of the software from the back-end of your PC. You will HAVE to be sure to follow those instructions to the letter.
Do these two things and let me know what happens after you install the printer again from the direct download link I have already provided above.
Let me know and have a great day!

Hp officejet pro 8610 windows 8 will not print off web

Hi,I have an HP Office jet Pro 8610 for about 7 months ,had to replace the printer head about 2 or 3 months in ,but it worked great.Now my printer will not print from the web,It will print from notepad and will print test pages just fine.It has printed from the web earlier today,it just stopped ,It will go to the print screen and just continue saying "loading preview" and nothing happens . I even left it up hoping it was just "competing " with other programs but my google chrome crashed ,Not sure if was printer related or not , here are the specs and info about computer and printer then the steps I already took
laptop is an hp pavilion 64 - bit operating system windows 8
printer hp office jet pro 8610 {print fax scan web}
using google chrome
1.turned off printer unplugged all cables and from outlet
2.restarted computer
3.did the troubleshoot
4.forgot printer and re installed
5.uninstalled printer totally and re installed{ using USB connection}
6.printed test page successful printed
7.printed notepad paper successfully
8.failed to print from google chrome.
9.stopped printer spooling and restarted {was worth a try}
10. uninstalled printer went to hp site allowed their hp installer to install printer wireless,printed test page successfully
11.failed to print from google chrome
12.troubleshooted again said everything was working fine.
13.searched forum and found nothing on this subject.
any other information you need ask.I am not interested in mucking around with my register at all or making any changes to my laptop that is not common(had a laptop destroy hard drive from that kind of advice,,,never again}
I'm hoping to get help to fix this as I use to print my business orders and this is he only printer I own ,other than these two problems (printer head ,hp replaced) I love this printer.Its fast and has good color
thanks awaiting help

no one answered this questio for me or even gave me advice....
I got it to print from explorer but not chrome .So for some reason it decided to stop printing from chrome all on its on.Not sure how long it ill print from ie but we'll see .thanks for no advice

Cyan ink will not print.

My Officejet Pro 8000 wireless suddenly stopped printing Cyan (blue) without warning. No "low ink" light, no printhead error messages, nothing. I replaced the ink tank, and the print head appears to be clean. The magenta, on the same print head, is working fine. Any help will be appreciated.

Hello Bisonbill,
Welcome to the HP Support Forums! I see you are not able to print in any cyan ink on your HP Officejet 8000 Wireless printer. You have no problems with any other color on the OJ 8000.
I would like you to start here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, please focus on the cleaning as well, the cartridge may just need to be properly vented, or cleaned.
Let me know if this helped.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Officejet pro 8500 a909g wireless will not open solution center saying device install not complete

Operating system is Windows 7 64-bit. When I try to open Solution Center I get a black window saying "HP Solution Center cannot run because your device installation is not complete." My printer is wireless so there is no USB so I unplugged the printer, removed the printer, rebooted, went to Print Server Properties then Driver and removed the driver still there. Then I downloaded the HP Full Software and Driver for my printer and got a "successful install". Then I plugged the printer in, added the printer, and still have the same error. Any suggestions?

What brand of computer do you have? I'm asking because I think you need a L3 uninstall, but if you have an HP computer, it can remove things the computer needs to run and cause the whole system to crash.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Officejet Pro 8600 - Slanted lines will not print smooth

I just purchased this printer and use it for home-office. I do a lot of graphics which have slanted lines throughout the documents.
These print very rough and jagged instead of smooth from one end to the other. I have aligned the printheads several times, but this
feature doesn't show any linear contrasts, only small colored blocks, etc. Is there another alignment process I should be using?

If you're a non-designer, you might not be aware of resolution issues. It could be that your slanted lines look fine on the screen because the monitor doesn't need anything higher than 72dpi (or 96dpi for a PC).
If you *are* a designer, you already know about resolution and raster and vector ... but could you maybe sort of forgotten to rasterize a vector line? Or maybe pasted a CMYK image into an RGB document? I'm just askin' because I bin der dun dat.

Hp officejet pro 8100 and it does not print bar codes from UPS or USPS

have an hp officejet pro 8100 and it does not print bar codes from UPS or USPS. Can you please please help? i have used my ipad, by HP G62-355DX Notebook and neither will give me printed bar codes. The balance of the mailing label do print, just not the bar code. It may be my imagination, by I believe it used to print thebar codes.

Hi,
Try adding an alternate driver and try to print.
To use an alternate print driver for HP printers in Windows 7:
1. Click on the Start menu.
2. Click on Devices and Printers.
3. Click Add a Printer
4. Add a local Printer
5. Select Create a New Port
6. Select Standard TCP\IP port
7. Enter Printer IP address (Printer IP address can be found by printing network config page from printer
8. Under Manufacturer select HP and under printer select HP Officejet 8000 pirinter or Officejet 7410
9. Click apply and try printing
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Have an HP Officejet Pro 8500 Wireless. Trying to print to it from my iPad2. Having some problems.

I Have an HP Officejet Pro 8500 Wireless. Trying to print to it from my iPad2. Having some problems. Trying to print docs or files from the iPad usuall gets me a page that looks scrunched up to one side. Is there a good printer app (preferably free or shareware) that I could get or is there a patch, new driver, new firmware or something for the 8500 that would allow good printing fro the iPad wirelessly?

The latest firmware version for your printer is DLM1FN1006BR; you can verify yours by printing out a self test page via the front panel of your printer.
Also, the HP ePrint Home & Biz app supports printing over your local wireless network, so please verify if your printer is connected to the same access point as your iPad2. You are also able to verify connectivity by typing your printer's ip address within the address bar of your safari web browser.
Say "Thanks" by clicking the blue Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"; therefore, it's easier for others to find.
I am an HP employee.

I have 2 itunes accounts. I can no longer use my first one for purchases so I had to start a new one and it will not sync from my new one without deleting everything on my same ipod from my previous account. How do I sync between both accounts?

I have 2 itunes accounts. I can no longer use my first one for purchases so I had to start a new one and it will not sync from my new one without deleting everything on my same ipod from my previous account. How do I sync between both accounts?

Wayland wrote:
The CS.com service account has long been closed. I cannot get it to respond to my years ago password for that account. So I ask them to send me a new password and of course it goes to my years ago email number.
Don't have it send email.
Answer the security questions.

Photoshop elements 13 will not print to my new epson wf-7620 error message;default printer could not be opened

frustrated! photoshop elements 13 will not print to my new epson wf-7620 error message;default printer could not be opened

I haven't been able to try this fix, but someone emailed me the below fix:
I had same problem.Elements13 would not open my new default printer, but worked ok on four other versions of Elements. No help from Adobe, after three days of searching & phoning adobe , I found out by:- Going into Elements 13, Press Edit button, down to "Preferences and across to general. Press the "Reset Preferences on next launch". I then suggest you go through each section to make sure that your chosen preference are still ticked/checked in.
It worked for me. Hope same for you.
I'm planning on trying this fix soon. Let me know how it goes for you if you get to try it before me. Will do the same. Thanks,
Chad

Officejet Pro 8600 - Macbook Pro and Macbook Air will not print

Products:
HP Officejet Pro 8600
Macbook Pro (Mac OS X, Version 10.7.5)
Macbook Air (OS X, Version 10.8.2)
Question:
Why did my Macs initially print fine, but now will not print at all?
Full Story:
I have a wireless network at my house that consisted of a 30mb cable internet, Netgear 900n, HP Officejet Pro 8600, 2 Dell Laptops with Windows 7, a Lenovo Laptop with Windows 7, and Dell Tower with Windows 7 - All printed just fine.
The HP Officejet 8600 was added to my network about 2 months ago.
I added a Macbook Pro and a Macbook Air about 3 weeks ago. Both Macs printed just fine for about a week. Then suddenly they stopped. I spent about 2 hours on the phone with HP Service, and they finally said it must be my router. So I called Netgear. Netgear was useless! They wanted me to agree to charges for services before they would even discuss the issue.
Due to information provided by HP's service support, and because Netgear will not support their product, I promptly purchased a new router - an Apple Airport Extreme.
The Macs recognize the printer, will print if hardwired via a USB cable, but will not print wirelessly to the Officejet Pro 8600. The PCs print fine.
The frustration that is being felt is compound by the fact that the Macs printed just fine with the Officejet Pro 8600 2 weeks ago, and now the printer just shows "idle"... even with a new router. (see image below)
Please help, I appreciate any support.
As a side note, the HP Service rep was very friendly, and definitely tried to support the HP Product, which is much more than I can say about Netgear.
Thank you,
This question was solved.
View Solution.

Hi,
More likely the issue related with Multicast, which Apple devices relies on to communicate with teh device through the network.
First try unplugging the router for 30 seconds.
Plug it back to the power and wait for 2-3 minutes.
Turn the HP printer Off and back On, then check for any difference.
If the same persists, try changing your router configuration as following
Note: the settings below are not related with the HP product, I provide you the steps as a best effor and those are only based on my own knowledge. you may try modifying the router settings at your own risk:
Open the router configuration page (can be found listed as the Default Gateway by clicking the Wireless icon on the printer, then print a network configuration report.
Click the Advanced tab.
Click the Setup option from the menu, then click on WAN Setup.
Make sure to uncheck the box next to Disable IGMP Proxying and Apply the changes.
Click the LAN Setup on the same Setup menu.
Set the RIP Version as RIP-2 and Apply the changes.
Reboot your router and then check for any change.
I hope you may find that information useful, you may also use the user guide below for further information:
http://www.downloads.netgear.com/files/GDC/WNDR4500/WNDR4500_UM_07DEC2011.pdf
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Officejet Pro 8500 Cyan ink will not print. installed a new one, but no success

Similar Messages

Maybe you are looking for