HP Officejet Pro 8500 Prints Pink VS Red

My HP Officejet Pro 8500 is printing pink instead of red. I have replaced all ink cartridges even though ink levels were not low. I have had this printer for several years and not had this problem unless cartridges needed replacing. I have run tests on the printer - no streaks or lines, just no red or yellow or green on test page (pattern is: 1st set black/grey, 2nd set blue, 3rd set pink, 4th set pink, 5th set blue). I have searched online for solutions and nothing has worked. I can't find the printhead for additional cleaning/replacement. Help!

Your printer is not properly printing yellow. (Red = magenta + yellow, green = cyan + yellow)
The troubleshooting steps in the document here may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Problem with HP Officejet Pro 8500 printer: cleans printheads every time it's turned on

Hello everybody,
the printer HP Officejet Pro all-in-one 8500 (A909a - product n. CB022A) cleans printheads every time I turn it on. This problem affects any HP Officejet Pro 8500 printer, it isn't a problem only of that one I purchased. It is an annoying and irritating bug because the printheads cleaning at each power on implies two bad disadvantages:
ink waste (each printheads cleaning process consumes some ink);
too much time (2-3 minutes) to get the printer ready after power on.
I upgraded my printer with the last firmware available on the HP site (firmware ver. DLM1FN1006BR) but the bug is still present.
At this point I ask:
there exists a way (or procedure) to disable this unnecessary automatic cleaning at every power on?
Can someone contact HP engineers or tell me how contact directly one of them to indicate the bug and ask a new firmware update?
Please don't tell me to leave the printer turned on all the time or that the printheads cleaning at every power on is a normal behavior! Where is then power and ink saving claimed for this printer model?
I hope to receive a solution for this problem. Thanks in advance to everybody will help me!
This question was solved.
View Solution.

The servicing when the printer is turned on is normal and is required to keep the printheads healthy (not clogged). See here for information.
As for power savings, the printer will automatically go into a low power mode when not printing for some time. It is not necessary to turn the product off and on to save power.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Officejet Pro 8500 prints only red

In the middle of a job, my Officejet Pro 8500 wireless all-in-one printer started printing only red. Now it does this every time, No cartridges are empty. Test pages are OK, but pages sent from websites, e-mails, etc, are just red. Any ideas?

Hi drbob31,
I see that you're having print quality issues. I would take a look at the document below.
Print Quality
Let me know how it goes.

HP OFFICEJET PRO 8500 PRINTER - new printhead installed - "checking device" won't shut off.

My magenta cartridge was not printing. All I got on the printed sheets was red ,yellow and pink colors. I replaced the magenta cartridge and the same thing happened. I then replaced to ccyan cartridge with the same results. I searched the tutotials and installed a new magenta/cyan printhead.
Now the "checking device" message won't go off. After about an hour I tried to turn the printer off and received the message that the mechanical operations coud not be turned off.
After another hour I just unplugged the printer.

Hello kenishal,
Welcome to the HP Support Forums!
Sorry to hear that the Officejet Pro 8500 is not printing its colors correctly, usually this type of issue is resolved by replacing the printhead. Hopefully we can get the printer past "checking device" to see if it has resolved the problem.
You can try removing and installing the printheads and the cartridges again, here is a walk through guide: 'Initializing' Displays on the All-in-One for Longer Than Expected During Setup.
If that helps get the printer to finish "checking device" and you are still having the missing or incorrect color issue, take a look through this support page: Fixing Ink Streaks, Faded Prints, and Other Common Print Quality.
Let me know if those suggestions have helped.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Epson Workforce 500 and HP OfficeJet Pro 8500 - "Printer Offline"

This week I downloaded an Epson printer driver update from Apple's Software Update. I use an Epson Workforce 500 with my Mac Mini computer at my office. Since installing Snow Leopard originally I had experienced no problems with the printer but assumed that if Apple was telling me to install a driver update, I should do so. Big mistake!
After installing the driver update I was unable to print anything. When attempting to print a page from Safari or MIcrosoft Word, everything initially seemed ok, until I saw my printer icon bouncing in the Dock with a yellow symbol indicating "Printer Offline." After searching the Apple site and various discussion boards I spent an entire afternoon attempting all of the recommended fixes with no results. Since I cannot operate my business without a printer, I decided to simply purchase a new printer hoping that this was simply an Epson problem.
I am now the proud owner of an HP OfficeJet Pro 8500 Premier All-in-One. Unfortunately I am still suffering from the "Printer Offline" message whenever I attempt to print anything. After spending another afternoon on the phone with a tech support person from HP, I am still unable to print. I have done all of the following:
Disconnected and reconnected all cables between the computer and the printer.
Switched the USB cable to a different USB port on the computer.
Restarted the computer and the printer.
Unplugged and replugged the computer to reset it.
Checked to confirm that the printer does show up under USB on the System Profiler.
Deleted any old print jobs in the print queue and made certain that the printer was not in pause mode.
Tried to print from various programs with the same result.
Although this printer does appear in the printer list, deleted it and then added it again under the Printer and Fax area of System Preferences.
Uninstalled the HP printer driver, restarted the computer, downloaded HP's latest driver for this computer from their website under the instruction of HP's tech support person and reinstalled this driver and again performing all of the above.
Repaired disk permissions several times.
Reset the printing system under the Printer and Fax area of System Preferences.
I have been unable to find any further possible fixes in any of the discussion boards either on the Apple or the HP site. After doing everything listed here the HP tech support person felt that the problem must be with Apple rather than HP since the problem developed initially after the Epson printer update and then occurred with both the Epson and the HP printers.
I have an appointment later today with an Apple Genius at my local Apple store to see if I can get any advice. Any suggestions from anyone on this board would be greatly appreciated since I do need my printer to carry on in my business. At this point I am desperate to the point of considering the replacement of my computer but am hesitant to do so suspecting that the new models should be released soon.

HI and Welcome to Apple Discussions...
Try downloading and installing the 10.6.1 combo update. It's OK to do this even though you are already running 10.6.1. One of the "fixes" .. "some printer compatibility drivers not appearing properly in the add printer browser"
http://support.apple.com/kb/DL930
Make sure and repair disk permissions after the installation.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Always make sure your Mac has sufficient disk space available.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. *Make sure you always have a minimum of 10% to 15% free disk space at all times.*
Carolyn

HP Officejet Pro 8500 prints slow with Lion. One page every 1.5 to 2 min. Apple support offered no help and HP unable to help. Any suggestions?

HP Officejet Pro 8500 Wireless prints slow with lion. One page every 1.5 to 2 min. Apple support and HP no help. Any suggestions?

Although printer is wireless capable I have it connected directly to iMac via USB to help with speed. I just completed resetting printer and reinstalling to no avail, still approx 2 min to print one page.

HP Officejet Pro 8500 Printer forcing a preview page before printing

I have an HP Officejet Pro 8500 (my computer is Windows 7 home premium) and it worked great until a couple weeks ago, perhaps as result of my computer upgrading itself to IE 9, but I don't know.
Suddenly it started forcing open a Preview Page, making me wait (sometimes very long times) for the preview window to open, and then I had to click once again to actually start the printer. It is very annoying to have to wait endlessly for the window to open up, and then it's another click to actually start. It is wasting a lot of time and making the whole process much more cumbersome and tedious.
How can I go back to my printer starting immediately without all these in-between steps?

Hi there sorry to learn that you are facing this problem.
Are you still facing this issue? If you are I will do my best to help you.
Have you upgraded the firmware of your printer lately; you can get the latest firmware in the main support page for your printer
This is the main support page for your printer, GO HERE Go to software and drivers download and select your operating system. You should also upgrade the firmware of the printer.
If you are not experiencing this issue any longer, May you let me know, your time and courtesy, will be deeply appreciated.
Regards;
RobertoR
remember ==▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

HT3669 HP Officejet Pro 8500 Print to Fax with Mountin Lion

Does anyone know how to install the Fax Printer for an HP Officejet Pro 8500 to work with Mountain Lion? HP website says it's in Mountain Lion. Apple Support says its not, but it is a known problem and that HP has the fix. HP Yech Support reads tje website to you, then tells you to delete all the printer on your system and sart over. Standard HP.

NoMan99 wrote:
Don't know anyhting about A909a, but it doesn't work for A909g series.
That same article mentions there is also a Fax driver available for the A909g and A909n.
NoMan99 wrote:
If you delete the FAX oru=inter then try to add it to force a new driver selection, there is no Fax printer that appears for the HP Office Jet 8500 -- only the Printer.
Never had a HP, but with my Canon device that supports Faxing from OS X, you see multiple entries in the Default view of the Add printer window. One for printing, one for scanning and one for faxing. When you select the entry showing Fax in the Kind column, the supporting fax driver is selected.

Officejet pro 8500 printer carriage does not go to the left to reset

I have a 4 yr old Oficejet pro 8500 - I want to change the print heads as its not printing color properly. But I cant move the carraige over to the left. Not by turning it on or off, or holding the @star 'ok' key. Is the machine passed its sell by date?

Hi , I see you are trying to remove your printheads and I think I may be able to help.
Here is a document on how to Replace the Printhead for HP Officejet Pro 8500 All-in-One Printer Series (A909) - the key to this, is that the printer needs to be powered on. If it still won't cooperate, you might have to do a hard reset. To do so, leave the printer on and unplug the power cable from the back of the printer. While it is unplugged, you can hold down the power button on the printer for about 10-15 seconds to release any built up power. Then plug the printer back in. Retry the steps listed in the document to move the carriage over. Please let me know if these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks,

Problem with HP Officejet Pro 8500 printer: Ink is vanished without any prints due to cleanups.

Hello everybody,
The printer HP Officejet Pro all-in-one 8500A A910 cleans printheads every time I turn it on. printer was updated with the lastet driver but my yellow,cyan,magenta inks gets vansihed without taking any colour prints.I take only BLACK prints(less than 500) and do scans.
This is worse printer i have ever used. It is using inks while clean up at startup or in between.Frustating thing is that It is using ink even during SCANS. Now, i really doubt the intellegence of designers of hp to such a big BUG.
Please update the driver so that during startup it will ask for SCAN or Print OR Clean the printheads when first print is given and addition to optimise the cleanups.
Hoping to get some solution form HP.

Hi arr_8500,
I understand you have an Officejet 8500 A910 that is running the clean printhead function each time you turn it on. I will do my best to assist you with this.
The reason the printer keeps running the clean printhead function is self maintenance. The printer is detecting an issue, so it will continue to run the clean printhead function until it's not detecting an issue. I would suggest you follow through this Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems to help clean out any ink build up and things like that. I'd also recommend that you manually clean your printheads to remove any build up there as well.
Finally, it's best to have your printer plugged directly to a wall outlet. If it's not already in one, please move it.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

HP Officejet Pro 8500 prints on computer startup

I have a officejet pro 8500a, When I turn on or restart my laptop the printer says now printing and will not stop until all of the paper is gone. it will finally stop after you cancel the print a couple of times. is there anyway I can stop this from happening? When it is printing it only prints a few numbers or letters here and there and it shoots out the paper rapidly. Thanks, Mike
This question was solved.
View Solution.

Hello,
Please download and run the HP Print and Scan Doctor from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Officejet Pro 8500 printed colours not true colours

All of a sudden my printed documents are printing using the incorrect colours - photos are 'greyish' (with muted colours); reds print as browny, etc. We always use genuine HP inks and documents previously printed fine from a colour perspective. When I 'align' the printheads, the page that prints out show black, blue and pink are fine but the red and green look all wrong. All inks are in place and none are low.

Hello Algonquin28,
Please add me a testpage to your post. You can print it by pressing Setup-> Print Report-> Self-Test report. Then add it by clicking the insert/edit page button. I will have a look at it.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Re: Problem with HP Officejet Pro 8500 printer: cleans printheads every time it's turned on

I own two of these printers and they both have been cleaning printheads every time it's turned on. My old HP officejet never had these problems.
The real problem is HP s credibility . They promoted that these printers used half the ink as any other printer. Even consumerreports showed 1/2 the cost per page.
As we all know that is pure BS notwithstanding the cleaning printheads issues.
Maybe I will let Costco know that I and all owners are unhappy and see if they will refund. They still sell them .
I will repost if I have any success.

If the printer is a year or couple yrs old, maybe the printheads need to be replaced? I once thought they would last forever, and that's really not the case with them, nor anything else really. Hope costco has some good news for you

HP Officejet Pro 8500- prints wirelessly from one computer in network but not the other

I can print wirelessly from my laptop, but not my desktop. The printer shows on the list, checked as the default, and READY, but document does not seem to find its way there. It never shows up in the print queue.

Download and run this utility. It should indicate what is wrong.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Hp officejet pro 8500 premier all-in-one printer

The above printer is 1 1/2 years old and it has stopped printing. When the printing became light, I installed new print cartridges less than a week ago. Now, after five days, the printer is consistently cleaning the print heads and aligning the print heads and my documents are not being printed. And, what is most frustrating, during all the cleaning and aligning, all of my new ink is gone and I'm receiving a message replace ink cartridges.
Re: Problem with HP Officejet Pro 8500 printer: cleans printheads every time it's turned on
Options
08-24-2011 06:34 PM
Well,
to this is say, "get used to it", or throw it away. Many, Many, Many people have had trouble with this printer.
The following are common and frustrating issues that this printer exhibits on a regular basis:
1. Constant Self-Checking (usually every 20-30 pages of print)
2. Very persistant Printhead Cleaning/Checking, (Every startup and after about 20-30 pages printed).
3. Worn-out printheads (usually within 1,100 to 1,500 pages printed).
4. Paper mis-feeds.
5. Paper jams.
6. Nearly impossible to use once the printer reports ink-depletion.
7. Nearly impossible to use CIS Ink for larger print jobs.
8. Ink and printheads "expire" regardless of when they are placed into service. (get a deal on ink or printheads last year? Too bad, the warranty is already expired, most likely).
In short, this printer is the most EXPENSIVE printer I've ever owned, and the most frustrating to use.
I have just over 2,000 pages of regular text printed matter with very little color, and have already gone through 4 sets of ink, and 2 sets of PrintHeads.
Although it's true that you can leave the unit on, and let it go into standby, you should NOT be punished with constant and time-consuming "self-checking" everytime it's turned on, or prints a handful of pages, BUT, it does NOT appear that HP will be standing behind this printer disaster. AND, to make things worse, they've gone on to redesign it, giving it a different look, and so there are about 6 different models/versions of the OfficeJet Pro 8500.
Anyone needing a reliable print/fax/scan/copy solution should look beyond this printer, because it will leave you wanting more, and spending more than you ever imagined you would have to on a late model printer.ro
What is going on? Why does it just automatically clean and align? I also get alignment failed messages. Any suggestiions?

rammerjammer,
Thank you for bringing this to my attention, your feedback is very important and I want to do my best to help. To answer what is going on, since the printing became light, started cleaning itself constantly, and fails the alignment, the printhead was damaged. Click here to see and use the Limited Warranty for HP Ink Cartridges, Printheads, and Related Supplies. There are many ways to contact HP. The number to call is 1-800-474-6836 for HP and Compaq products for Home & Home Office use. If you no longer have a warranty with the printer you can still use the warranty that comes with the printhead or ink cartridges.
If you have a carepack with the printer that extended the one year warranty then the troubleshooting will be covered along with the printer if the printer needs replacing. Check product warranty here, see HP Out of Warranty Support Options for Select HP Consumer Printers here.
To order a new printhead you can go to HP Sure Supply and enter your printer or go to the HP Parts Store and order the printhead by part number C4900A for the Black and yellow and part number C4901A for the Cyan Magenta. These printheads go by region also so be sure you are using the right region, these were found using the United States region.
The HP Officejet Pro 8500 Premier All-in-One printer has separated the ink cartridges from the printheads. The ink cartridges are on the lower left and the removable print heads are on the carriage inside the printer. The printer goes through a calibration process when turned on that will use ink. Leave the printer on and let it go into stand by mode. This type of printer is energy star efficient and made to calibrate on start up and be left on. Allow the printer to clean or calibrate only if the printer must. If it starts cleaning a lot it may be time to do a little maintenance to the printer (recommend once a month for maintenance). Please see the following links for further details.
Cleaning the Printhead Contacts
Printer Paper Tears, Wrinkles, or is Damaged while Printing from the All-in-One
Paper Path Issues in the Automatic Document Feeder
Officejet Pro 8500 User Guide
The printer has a duty cycle of 7.5k page/month. The XL cartridges have a composite page yield of 1.4k pages with about a third of the black ink left over. To me it would seem that the printhead should last somewhere in between. This printer was designed to save money on ink compared to the rest of the officejets. I hate that it has been causing so much trouble, hopefully the information I provided will help.
HP Officejet Pro 8500 Premier (A909n) and 8500 Wireless (A909g) All-in-One Printers Product Specifications
Click here for page yield information.
Click the Kudos on the left side for helping and click Accept as Solution for providing a solution. I work for HP.
Best Regards,
Kenneth

HP Officejet Pro 8500 Prints Pink VS Red

Similar Messages

Maybe you are looking for