HP Officejet Pro 8500A: Initial Checking Printer Procedure does not stop

I have a big problem.
My printer does not stop to run the "Checking Printer" procedure.
It tells me: "Open the print-carriage access door, clear the jam, and then touch OK to continue.
Unfortunately there is no paper inside.
Pressing OK, the printer continues the procedure and it NEVER stops.
Switching OFF and ON the power does not help.
But if you try to print the Auto Test Report it works. The printer prints the report without any problem!!!
PLEASE HELP ME
Andrea

Hi there andrea_lugano,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

Need MICR compatible ink cartridge for Officejet Pro 8500A Premium to print checks.

I need to print bank accepted checks on my Officejet Pro 8500A Premium printer using MICR ink. I cannot find a compatible MICR cartridge for this printer. There are MICR cartridges available for other HP printers. Does anyone know of a compatible cartridge?

Try using the multilevel uninstaller in the HP software driver CD. Browse the contents of the CD and look for the "Util" folder and open it. In the "Util" folder, open the "CCC" folder. In the "CCC" folder, double click on the "Uninstall_L3.bat" file. Don't use the "Uninstall_L4.bat" file. It could remove files that have shared dependencies with the HP software. Restart the computer and then reinstall the software afterwards. Let me know if it worked or not.
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem

HP Officejet Pro 8500A Used to print now I have to reinstall everyday

I have a HP Officejet Pro 8500A Plus e-All-in-One Printer - A910g that used to work beautifully.
My computer hung one day and I had to hard restart it (kill the power after it was frozen for 10 minutes) . Since then I have to uninstall the HP printer (from the Start menu) and reinstall it daily in order for the printer to be recognized an able to communicater. I ran the diagnostic utility - it was found on the network, the IP address does not change, my PC finds it and I can open the printer page in the browser, see all of the address information, ink information etc.
I can print a test page from the browser, but when I try to print a pdf or print from word I get the message unable to communicae with Printer.
I am thinking I need to completely wipe the HP software and start over, but the uninstaller does not do that.
Any suggestions would be appreciated. This is getting really annoying.
Thanks

Try using the multilevel uninstaller in the HP software driver CD. Browse the contents of the CD and look for the "Util" folder and open it. In the "Util" folder, open the "CCC" folder. In the "CCC" folder, double click on the "Uninstall_L3.bat" file. Don't use the "Uninstall_L4.bat" file. It could remove files that have shared dependencies with the HP software. Restart the computer and then reinstall the software afterwards. Let me know if it worked or not.
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem

HP Officejet Pro 8500a problem with printing black ink

I have an Officejet Pro 8500a printer. When I print documents, it will not print anything in black ink. The colors work fine, but black just won't print. The printer claims that the black ink cartridge has plenty of ink, and when I shake it I can tell that there is something in there. So, I don't think it is an issue of the black ink being out. Is there a chance that something is blocking the ink from coming out? Any fixes to this besides buying a new ink cartridge?
This question was solved.
View Solution.

The document here may help resolve black not printing on your HP Officejet Pro 8500a.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp officejet pro 8500a won't print or copy without turning off then on again

HP Officejet pro 8500A, Will not print, copy or print received fax. HP icon on the Printer screen just spins, but never prints. The print jobs show in the Que, but never print out. If I shut off the printer and turn it back on it will print, but after a short while it stops again. It has also asked for ink to be replaced.

Hello pcmtgrl
Which model of the Officejet 8500A series do you have? Typically you can find it inside the printer where you change the ink cartridges. Example: A910g, A910a, etc.
Has anything changed recently since the problem started? Is the printer plugged into a wall outlet or a surge protector? Do you have the latest firmware installed? I also suggest running the HP Hardware Diagnostic Utility. Let me know if it finds anything out.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Re: HP Officejet Pro 8500a problem with printing black ink

I have an Officejet Pro 8500A. I did a printhead clean. I have plenty of black HP ink. Printhead status indicates black/yellow is good. I am barely getting any black to print. All the colors are fine. Help!
This question was solved.
View Solution.

Hi @di43
I appreciate the troubleshooting you have already completed to resolve the issue. I understand the black ink is not printing as expected. Although you have already done some of the steps in the following document, I suggest completing all of the recommended solutions in the order they are presented, even if that means doing something you already tried; Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Officejet Pro 8500A e-Al...
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Officejet Pro 8500A - unable to print on odd-size paper

After a couple of hours of frustration, I have decided that I an unable to print on odd-sized paper on our brand new HP printer! On an older string in this user forum, one suggestion was to make a paper cut-out from regular sized paper to put on top of an envelope to "fool" the printer into thinking it was using standard sized paper. I am trying to print odd-sized wedding invitations, and in order to to do this, I wouldn't be able to use the paper guides intended to keep the smaller paper in the middle.
Another suggestion would be to create a "custom size" paper in the printer properties, which doesn't seem to be possible in Windows XP as far as I can see.
My card-stock paper measures 4 3/4" x 6 7/8" Neither 5 x 7" nor 4 x 6" will work and I have tried numerous others, such as Janpanese postcard, Index card 4 x 6, etc.
Any suggestions? This is frustrating enough to look at other namebrand printers next time, but I guess I'm stuck with this one for a while!

Hello @drlogan0,
Welcome to the HP forums.
I understand that you are encountering problems with getting your Officejet pro 8500A onto your new wireless network.
I would like to help.
i would try restoring the network defaults. This will help erase any 'old' information that may be stuck in the printers memory. I would like to give you specific steps for this, but I am unsure if you have the 8500A, 8500A wireless, or the 8500A premium.
Basically the steps are, go into the network menu, and select restore network defaults.
If you have tried restoring the network defaults already, please review the following troubleshooting documents.
Setting Up the Printer for a Wired or Wireless Network for the HP Officejet Pro 8500A
Printer Does Not Maintain Wireless Connection
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

I have successfully installed printer officejet pro 8500a but cannot print my emails.

How do I print e-mails on my new printer HP Officejet Pro 8500A?

That depends of your e-mail service. If you are using Outlook, or just directly using Hotmail/Gmail/other mail service...
Or, are you getting an error when you try to print e-mails?
Or, are you trying to use ePrint?
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

HP Officejet Pro 8500A fails to print until powered down and restarted.

This problem has arisen after about a year of giving good service. Although it says "Now Printing," it does not print until powered down or disconnected and restarted or reconnected for each print job. I will be most grateful for any suggestions for fixing this.

Hi @jmuravchik
Do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
^ This is not limited to Laserjet printers.
Also, running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity:
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check: Checks for missing or corrupt driver files.
Device Manager: Checks for problems in Device Manager that would prevent printing.
Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match: Checks the port settings for the HP product.
Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
Print Settings: Checks and adjusts the print quality settings.
Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests: Checks the scan mechanism, drivers, and registry entries.
Source:Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor >>>>> www.hp.com/go/tools
If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
If you see only green check marks (), the tool did not find any problems.
If you see green wrenches (), the utility identified an issue and corrected it automatically.
If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
If you see a red X (), follow the on-screen instructions to resolve the issue.
I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Hp officejet pro 8500a - get "error - printing" on all documents

Quick history:
Both my laptop and my printer HP Officejet Pro 8500 A910 have been working happily for months, with wireless connection via Belkin wireless hub.
> Had printer jam errors - so just replaced printer under warranty - completed set-up - printed test pages - wireless connection ok (did wireless test report, albeit signal quality "Very low", but has always been like that and worked in past.)
> Printing word document - just generates error "Error - printing" and stays stuck in queue.
Anything else that has happened in interim ...
> I have installed LiveDrive in the interim to back up all my files on the cloud - works in the background. Can't imagine it's relevant?
> Any help greatfully received, driving me mad!!
Neil

Hi Rossainz, I don't know that I can answer 'what is wrong with it', but I would be happy to help you figure it out and better yet, resolve the issue. Let's first try leaving the printer on and unplugging the power cable out of the back. Leave it unplugged for a full minute during which time you can hold down the power button for just a few seconds to help release and build up power, then plug the power cable back in. If the issue persists, please let me know and we will see what other solutions might do the trick.

How do I get my HP Officejet Pro 8500A Plus to print a small font?

My printer prints a very small font. How can I get the pringter
to print a larger siged font.

Hey , I understand that you are not able to print the court seal on legal documents on your HP Officejet Pro 8600 Plus e-All-in-One Printer. I would like to assist you today with resolving this issue. However, I do need to clarify a few things before I will be able to guide you to a solution. (1) What program are you printing these court documents through? (2) Does the court seal appear in a Print Preview window under the program? Once I have the answers to my two questions above I will be happy to guide you to a solution. I look forward to hearing from you!

OfficeJet Pro 8500A won't print test page

This printer suddenly won't print, even a test page. When I try to print from another program I get an error message, document gets stuck in print que. Wireless is recognized. Scan Doctor found printer, still it won't print. Suggestions?

Hi
The problem seems to be with the print spooler service.
since you have already tried the print scan doctor
we can try doing it manually.
Firstly Determine whether the printer is paused or offline
Return to the Devices and printers folder that you opened earlier in this document.
Right-click the name of the product, and then click See what's printing .
Click Printer .
On the print queue menu bar, click Printer , and then look for the Pause Printing and Use Printer Offline items in the menu.
Make sure that there is no checkmark next to either item. If a checkmark displays next to either item, click to clear it.
If these steps resolved the issue , you do not need to continue troubleshooting.
If the issue persists , continue to the next solution
Manually clear the print queue
Return to the Devices and printers folder that you opened earlier in this document.
Right-click the name of the product, and then click See what's printing .
Click Printer , and then click Cancel All Documents .
Click Yes to confirm the action.
If documents remain in the print queue, restart the computer.
Try printing again.
If these steps resolved the issue , you do not need to continue troubleshooting.
If the issue persists , continue to the next solution.
Restart the Print Spooler device
On the Windows taskbar, click the Windows icon ( ), type admin in the Search programs and files box, and then click Administrative Tools .
Double-click Services .
Right-click Print Spooler .
Click Stop to stop the Print Spooler.
Click Start to restart the Print Spooler.
Restart the computer.
Try the print job again
Regards,
Charles Thangaraj
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

HP OfficeJet Pro 8600 Plus will print wirelessly but not scan

I have a HP OfficeJet Pro 8600 Plus all in one printer/copier/scanner. It's worked fine for the several months I have had it. But now suddently the computer does not recognize the scanner. I am connected to the device wirelessly and can print but not scan. I haven't been able to figure out why the comptuer recognizes the printer but not the scanner. I uninstalled and reinstalled the device but still no success.
Any ideas how I can get the computer to recognize the scanner? I am running Windows 8. Have not updated to 8.1.

Hello Sarah1234, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scanning issues. I would like to help.
I would recommend powering off your printer and computer. Once they are both down, I would recommend unplugging the power from your wireless router for 60 seconds, and then plugging it back in. Once it has begun broadcasting again, power on your printer and computer.
I would also recommend downloading and running the HP Print and Scan Doctor. Once you have launched the tool, select the 'fix scanning' option.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Update to 28 and the checking compatibility just does not stop

fire fox does not start the checking thing keeps running

You can check for problems with preferences.
Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Director: Show Folder (Linux: Open Director; Mac: Show in Finder)
It is possible that there is a problem with the file(s) that store the extensions registry.
Delete the extensions.* files (e.g. extensions.json, extensions.sqlite, extensions.ini) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons
If you see disabled or not compatible extensions in "Firefox/Tools > Add-ons > Extensions" then click the Tools button at the left end of the Search bar to check if there is a compatibility update available.
If this hasn't helped then also delete possible addons.json and addons.sqlite files.

HP Officejet Pro 8500A Plus Duplex printing

I have the printer default set to duplex printing. However, my old printer could recognize when a one page document was being sent and would stop printing before flipping the paper with the duplexer. This printer flips the paper every time I send a one page document to the printer. Is there any way to change that?

The fact that it was solved and then came back points to some (unknown) issue with your Mac's software.
Try these generic fixes first (and then do the reset printing system and re-add again):
http://support.apple.com/kb/ts1417
(one of the three methods - I like Disk Utility best - you can also repair disk permissions while there.)

HP Officejet Pro 8500A: Initial Checking Printer Procedure does not stop

Similar Messages

Maybe you are looking for