HP officejet Pro 8500A software driver for Mac OS v 10.10.2

Dear,
could you please provide me the HP officejet Pro 8500A (A910a) software driver for MacBook pro (OS X Yosemite v10.10.2) while is it not available on the website.
regards,
This question was solved.
View Solution.

Sure,
thank you again 7 best regards,

Similar Messages

  • HP Officejet Pro 8500a software stalls after printing one document,

    Hi, HP Officejet Pro 8500a, Product No CM755A. It used to work well, but now I can't rely on it to print more than one document.  If there is a delay of several minutes before I try to use it again, then no print occurs: the screen on the printer says e.g. 'copying document' or 'printing page 1 of 1', but the printer makes no sound and stays at that stage for ever.
    Can I do a soft or hard reset of the printer software in the printer, or solve it some other way?  At present I have to turn it off and then on again, wasting ink.
    I can take it back and replace it under extended warranty, but don't want to do that if there is a simpler way to fix it.
    Regards

    Hello Rtdnorseman,
    Thanks for the post.  It is possible to reset the printer to clear some of these issues.  I've included a link below that walks through the steps.  Also, ensure that you are plugged directly to an outlet, not into a power strip or surge protector.  Good Luck!
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c03177455&cc=us&dlc=en&lc=en&product=4083969&tmp​...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • External hard drives for mac pro, external hard drives for mac pro

    my laptop always says there is not enough space and I notice my hard drive it out of room, what would be a best external hard drive that will support the Mac Book Pro?

    huge storage, low cost, high quality, very small and portable.
    BEST FOR THE COST, Toshiba "tiny giant" 15mm thick  2TB drive (have several of them, lots of storage in tiny package)    $100
    http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48    /ref=sr_1_3?ie=UTF8&qid=1390020791&sr=8-3&keywords=toshiba+2tb
    best options for the price, and high quality HD:
    Quality 1TB drives are $50 per TB on 3.5" or  $65 per TB on 2.5"
    Perfect 1TB for $68
    http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
    Nice 500gig for $50. ultraslim perfect for use with a notebook
    http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s    r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
    *This one is the BEST portable  external HD available that money can buy:
    HGST Touro Mobile 1TB USB 3.0 External Hard Drive $88
    http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr    _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+7 2 00+RPM
    Most storage experts agree on the Hitachi 2.5"
    Hitachi is the winner in hard drive reliability survey:
    Hitachi manufacturers the safest and most reliable hard drives, according to the Storelab study. Of the hundreds of Hitachi hard drives received, not a single one had failed due to manufacturing or design errors. Adding the highest average lifespans and the best relationship between failures and market share, Hitachi can be regarded as the winner.

  • HP Officejet Pro 8500a plus Full-full Reset

    I have this same problem:
    http://h30434.www3.hp.com/t5/Other-printing-questions/HP-8500A-premium-a910-The-touch-screen-will-re...
    i tried partial reset and semi-full reset but doesnt work for me,i hope someone knows a way to do a full-full reset like this:
    http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/Officejet-8500-reset-help/m-p/170462
    but for my HP Officejet Pro 8500a plus
    Thanks for support
    This question was solved.
    View Solution.

    I am still having this problem with my printer. It worked for a few months just fine, now it hangs every time it sits for more than a few minutes.
    {Content Removed: Confidential information} 
    When I do this, nothing happens. If I press & hold the power button the power light comes on, but the screen stays blank. Pressing the button combos you suggest on the blank screen does nothing. Am I doing something wrong?
    UPDATE:
    OK, I got into the menu. I didn't have to do the 5 second power button thing. {Content Removed}
    I have been playing around in this new menu and have discovered that if I place the printer in MFG mode, it responds and prints even after going to sleep (but the print quality is bad). When I place it back in USER mode, it goes back to not printing after a few minutes. For now, I am just running the printer in MFG mode unless I need to print something with high quality. I really hope they can get a firmware update to fix this thing or it's going to be my new boat anchor soon.

  • Need MICR compatible ink cartridge for Officejet Pro 8500A Premium to print checks.

    I need to print bank accepted checks on my Officejet Pro 8500A Premium printer using MICR ink.  I cannot find a compatible MICR cartridge for this printer.  There are MICR cartridges available for other HP printers.  Does anyone know of a compatible cartridge? 

    Try using the multilevel uninstaller in the HP software driver CD. Browse the contents of the CD and look for the "Util" folder and open it. In the "Util" folder, open the "CCC" folder. In the "CCC" folder, double click on the "Uninstall_L3.bat" file. Don't use the "Uninstall_L4.bat" file. It could remove files that have shared dependencies with the HP software. Restart the computer and then reinstall the software afterwards. Let me know if it worked or not.
    Binary_Zen (worked at HP )
    Click the white Kudos star to say thanks
    Please mark Accept As Solution if it solves your problem

  • EPrint for HP Officejet Pro 8500A works, but ePrint account closed my sign-in

    I have been using ePrint with my HP Officejet Pro 8500A for 2 year and it works great.  After the latest software update, I tried to log in to my ePrint account to add another authorized user, but the system has forgotten my E-mail address.  I know I am using the correct E-mail address, because I get HP mail reminders for my printer at that address and it is the only one I use for business, but I can't even trigger a forgotten password because the new ePrint says I don't exist. 
    If I create a new account for the same printer, will that conflict?  I have the printer's E-mail address and use it regularly, so I know it is properly connected to my wireless and that it talks to ePrint.  Is there any way to recover an account if you have the printer's E-mail address and serial number?
    Thank you!
    David 
    This question was solved.
    View Solution.

    Hi David,
    Click the Forgot Password link on the Sign In page and provide your emai address to reset the password.
    https://h30495.www3.hp.com/user_login?next=%2Fc%2F46193%2FUS%2Fen%2F
    If the email address is not recognized, try resetting the password through the HP Snapfish site.. that may work if the accound has been marked to be associated with HP Snapfish during the registration:
    http://www1.snapfish.com/snapfish/forgotpassword/module=true
    Last but not least, you may migrated your account with the new HP Connected service, then you may try retrieve your password below:
    https://toran.hpconnected.com/oauth/ui/resetpwdpage
    The sites above should cover any possible account association and I believe that one of them should recognize your email address and allow resetting the password.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Mac os 10.6.8 & hp officejet pro 8500a plus (910g) stopped printing wirelessly​.

    hp officejet pro 8500a plus (910g) prints from mac os 10.6.8 with a usb, but stopped printing wirelessly
    HP Network Configuration Page states Network Status: ready and Active Connection Type: Wireless
    Wireless Network Test Report - looks A-O.K.
    Turned off modem, printer and laptop & restarted modem, printer, laptop computer
    Seems that the computer can't "find" the printer, maybe.
    Any suggestions would be appreciated!

    If you open System Preferences --> Print & Fax and click the "+" symbol at the bottom of the printer list on the side, you should get an "Add Printer" dialog window to pop open.  Is your printer visible in that window?
    If not, try printing a configuration report from the printer, to get the IP address your printer currently has.  If you type that number into your web browser of choice (Safari, Firefox, etc.), does the printer's "embedded web server" page load?
    If so, you could set up the printer on your Mac using the IP address in the "Add Printer" dialog. To do that, you select "IP" at the top of the window rather than "Default" (which is a discovery list), and paste the IP address into the "Address" field.  If the printer is available, it should pick the model automatically.
    Cheers,
    dot11
    I am an HP Employee
    Please mark the post that solves your problem as "Accepted Solution"
    Click the KUDOS Star to say "Thanks" if my answer solved your problem
    I work for HP

  • No Computer Detected in Scan Mode Only. Officejet Pro 8500A. MAC OS10.9

    My 8500A will not detect my computer in scan mode.  Both printer and computer are on the network.  I can print from my computer.
    Directions for A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning only go up to 10.8 and when following directions to Open Print Queue and window opens but with no printer settings.
    This question was solved.
    View Solution.

    Re: Officejet Pro 8500A MAC OS10.7 No computer detected in scan mode only
    Options 
    This post solved my problem.
    11-06-2013 06:21 AM
    Hi rogerpk,
    I will do my best to help you resolve your scan issue. Follow the steps in this LINK for scanning in OS X v10.9.
    Let me know if this helped.
    Thank you.
    Advance 23
    I work on behalf of HP

  • HT1444 Running 10.8.2 on MacBook Pro. Purchased Toshiba 1TB external drive.  Calls for installing NTFS driver for Mac.  Any concerns here?

    My MacBook Pro is running Mountain LIon 10.8.2.  I just purchased a Toshiba external hard drive offering USB 3.0 & 2.0.  The NTFS driver for Mac is included.  The compatability indication includes Lion ... but not yet ... Mountain Lion.  Should I be concerned about loading this software? 

    Or you could just reformat the drive to exFat or FAT32 and then you won't need any additional software. Also, you can check app compatibility at www.roaringapps.com. I don't know if this includes any type of drivers.

  • Auto switch from tray 1 for envelopes to tray 2 for letters on HP Officejet Pro 8500A Premium

     Hi I have a HP Officejet Pro 8500A Premium e-All-in-One Printer - A910n My Operating System is XP Media Center.  I haven't been able to get it to switch from one tray to the other automatically. Also  it only remembers 1 type of paper at a time. I can't get it to show in Properties, Paper  available, more than one type of paper. I open device settings, Form To Tray Assignment, Printer Auto Select :Letter.     Tray 1 : Letter   Tray 2 : Letter.   Now I change Tray 1 : to Envelope #10  click apply, click ok, it closes out. I open the Properties back up & Tray 1 : is back to letter.  Is there a way to get the printer to remember the it is set up with 2 Trays with 2 different types of paper ? I think the problem lies with the Printer Auto Select : But I am not sure. I would like to be able to print an address on an envelope when working in works. Without having  to manually change the Tray settings. Does any one Know How to set this up ? Thanks in advance for taking the time to read this issue.
    This question was solved.
    View Solution.

    Hi MrHope,
    Make sure that the printer is set to have tray 2 as the default tray, and then try setting the paper types for each tray in the printer settings.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02917871
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Unable to install a software driver for Canon film scanner on mac OSX 10.6

    I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.
    I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • How can I download the Printer Manuel for OfficeJet Pro 8500A. Thank You.

    How can I download the Printer Manuel for OfficeJet Pro 8500A.  The easy way.  Thank You.
    This question was solved.
    View Solution.

    Hi,
    You can download the User Guide on the link below.
    http://h10032.www1.hp.com/ctg/Manual/c02668142.pdf
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • What is the best photo paper 4'x6' for HP Officejet Pro 8500A Plus e-All-in-one Printer?

    1.-HP Officejet Pro 8500A Plus e-All-in-One Printer
    2.-OS: Windows 7-64
    3.-No error messages
    4.-No changes have been made
    5.-I have been printing in my with old "hp premium plus glossyphoto paper" and getting very dark photos and too much  wasted ink .
    I've been using "hp premium plus glossy photo paper" and getting very dark photos.
    Before this printer I used a Deskjet 5550 with the same paper and getting great quality. 
    Thank you. Luis Cuenca 
    This question was solved.
    View Solution.

    HI cuencaky,
    Here is a link to a page with an example of good 4 X 6 photo paper you can use with your printer. 
    This type of paper is known to work very well.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • HP Officejet Pro 8500A Plus printing issues

    I have been having two new issues suddenly (within the past 2 weeks) with my HP Officejet Pro 8500A Plus. I am trying to print from my iMac 27 inch running OS.X 10.8.4 Both the mac and the printer are connected to a wireless network via an Xfinity Wireless Gateway. I have just replaced the ink cartridges in the printer but am unable to print black & white. In fact everything is comming out kinda pink. I have posted on HP's support site and was told to
    Download and install this: http://support.apple.com/kb/DL907
    Restart your Mac.
    Reset the printing system:
    - Go to System Preferences > Print & Scan
    - Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and then next to the "Use" pulldown, select the printer model (not AirPrint). Wait until the "Add" button becomes available. Click it.
    Having done that initially my problem was solved. But now I'm having the problem again. I went through the above steps again, but still not able to print. Are there any suggestions for a fix. Is anyone else seen this issue? Is there a particular printer manufacturer that works well with Apple. Because at this point I have a large paperweight that is of no use to me!

    The fact that it was solved and then came back points to some (unknown) issue with your Mac's software.
    Try these generic fixes first (and then do the reset printing system and re-add again):
    http://support.apple.com/kb/ts1417
    (one of the three methods - I like Disk Utility best - you can also repair disk permissions while there.)

  • HP Officejet Pro 8500A Plus - Magenta Not Printing

    I have an HP Officejet Pro 8500A Plus (A910), Model number CM756A, Serial number: [Moderator edited Serial Number] that is not printing magenta. 
    Firmware version: LRP1FN1231AR. Service ID 21057. IK Number 658.
    Software version: 028.000.1315.000. Printer Driver version: 09.84.00.1189
    The Printhead Status for all cartridges reports as "Good" in the Self Test Diagnostic Page.
    I have run a Print Quality Diagnostics and in Test Pattern 2 there is no red/magenta colored block appearing.
    I did not have any alert for low print quantity, however I replaced the Magenta inkcartridge with an HP Officejet 940XL new magenta ink cartridge (HP genuine) and still there is no Magenta printing.
    When I open the ink cartridge holder, the printer shows HP Model: A910g, HP Ink Cartridge 940.
    I have gone through this exercise several times, however the latest Magenta ink cartridge that I removed from the printer prior to replacing had the following information on it:  C4908A, 2016/05/22.  The newest cartridge I put in has a September 2017 expiration date (part number C4908A). 
    I am not getting any error messages or anything, there is just no Magenta being printed.
    First - I would like to know how to fix this issue with the HP printer.
    Second - is there anyway to get a refund for the ink cartridges I have had to use (and waste) trying to resolve this problem.
    Thank you.

    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
    If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Maybe you are looking for