HP Officejet Pro 8600 N911g Scan to gmail with 2-step verification

I have an HP Office Jet Pro 8600 N911g printer which is a replacement for another one. I am using gmail. I am seting up the Scan to E-mail. I put in all the required information asked by the wizard and when I test it, it comes back with "Incorrect credentials". My gmail has a two step verification process where it will send a code to my mobil device. I remember setting the Outgoing E-mail profiles up on the previous printer before the replacement but I cannot remember how I got the "scan to E-mail" to work using the 2-step gmail verification.
Looking at another post about gmail I even click on the "Network" tab and changed the IPv4 DNS server settings to 8.8.8.8 and 8.8.4.4.
I checked and tested my gmail/Google to make sure that my gmail 2-step verification is working correctly.

Scan to email allow you to take a document that you have and send it wherever you want to send it as long as you have someone's email or you can send the document to your email.
Here is the solution to the 2-step verification with google's email.
Get into your google email. Click on your picture or name in the right-hand corner and click "Account". On the "Signing In" box click on "2-step verification". From there go to the App-Specific passwords tab. Click "manage application specific passwords". At the bottom chose mail, select device and then generate. Follow the prompts and guidelines from that point.

Similar Messages

HP Officejet Pro 8600 N911g always cannot print and scan after turn on the Mac from sleep

Dear Community:
This is my printer:
1. Product Name and Number
Product Name HP Officejet Pro 8600 N911g Product Model Number CM750A Product Serial Number {Private Information Removed} Service ID 23022 Firmware Version CLP1CN1150CR Total Page Count 4187
2. Operating System installed (if applicable)
Mac OS X 10.7.5
3. Error message (if any)
After several issue which prevented me from printing I uninstalled all HP software on my Mac OS X 10.7.5 laptop. I downloaded and installed: Officejet-Pro-8600_v12.23.0.dmg after complete I can print and scan. then I go home and put my laptop to sleep. after I come back to work this morning I cannot print and scan again. HP utility cannot connect to that printer because all information there (all fields) displayed as: unknown Please help.
4. Any changes made to your system before the issue occurred
Nothing. I just put my Mac to sleep and put it back on.
5. In the subject title, include a brief, specific description of the problem, and your product information (i.e., product name of your laptop, notebook, printer, other device, etc.)
After several issue which prevented me from printing I uninstalled all HP software on my Mac OS X 10.7.5 laptop. I downloaded and installed: Officejet-Pro-8600_v12.23.0.dmg after complete I can print and scan. then I go home and put my laptop to sleep. after I come back to work this morning I cannot print and scan again. HP utility cannot connect to that printer because all information there (all fields) displayed as: unknown Please help.
Is there anyone out there who have any idea on how to solve this problem? Thank you all in advance.
This question was solved.
View Solution.

OK, here are more specific instructions:
1. Open Finder (double-click the Finder icon in the Dock).
2. On the left side of the resulting Finder window click on Applications.
3. Double-click on "Image Capture".
4. Follow the instructions above.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Intermittently having issue sending scans to networked directory folder HP Officejet Pro 8600 N911g

Hello All,
I have a printer installed an AIO HP Officejet Pro 8600 N911g which is cappable of scanning either by flatbed or feeder to a networked drive/folder. For the most part this works fine, however 2 times out of 10 it produces the following error;
"Cannot connect to \\'Server details\Folder location path'. Make sure the remote computer is turned on."
Now I have seen many post about disabling the filewall and other, however none of this type after an install.
Some obvous checks have been made already, Network cable replace, Changing of the destination folder location, and reseting the password for the scanner to auth as well as confirming the permisions. And each time the tests via the web console and physical tests work fine though this doesn't last.
Could anyone help?
Thanks

Hi @Paperjam27
From your description, it sounds like the issue is intermittent. It can sometimes be challenging to identify the root cause of an issue when the problem is not consistent, but I am happy to work with you towards a solution. I suspect the issue might have something to do with the network. I know you said you have tried a new cable and done some troubleshooting already but bear with me here.
When you say you replaced the cable, do you have an Ethernet cable connected between the printer and the router? if not, then I wonder if there is some sort of interference on your wireless connection. Is your router is a dual band router broadcasting both 2.4 and 5.0 frequency? The printer only works on 2.4GHz, maybe this is the root cause.
The channel your router is set to can impact your network consistency too. For example, if you are on channel 11 and others in your area are also on channel 11 or even 9 or 10 it causes congestion on that channel. Think of the channel like a highway or interstate, the more cars on that highway/interstate, the slower you go due to congestion, if you are on a highway with less people are on it, it is more like smooth sailing! You can print a network configuration page to see what channel you are using and see what channel others in your area are no. If the higher channels are most common you might consider changing yours to 1, 2, or 3, and visa versa. How to: Printing a Network Configuration Page.
has this ben an issue since you have had the printer or did it recently start happening? If this only recently started, can you think of anything that changed recently? Do you have only one access point (router) or do you have a secondary router or extender? Can you think of anything that might be interfering with your network, and do you find the issue occurs more at a certain time of the day than others?
I found on my network at home, I was often seeing delays in response time in the early evening because others are coming home from school and work and 'clogging up the channel', I changed the channel and have had little to no issue since.
Let me know if you think of anything, and post back with the answers to the questions I have posted and I will get back to you. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I cannot "scan to computer" with my HP Officejet Pro 8600 N911g ) - The option has been enabled

I cannot "Scan to Computer" with my HP OfficeJet Pro 8600 N911g - The option has been enable in the HP Utility - but I receive a communication error message - I'm connected to the computer using a Linksys Wireless Router and I am using OS X 10.5.8 - I can print wirelesly and I can use Web Scan, so the connection is good.
How do I resolve the issue?

petergole,
To make sure we aren't dealing with a software problem lets try to uninstall with the 'scrubber option' like this:
1. Go to Applications/Hewlett Packard/ click on HP Uninstaller and click Continue
2. Highlight your device on the left pane
3. Hold the Ctrl, Opt and Cmd keys and click on Uninstall
4. There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
5. Click Continue and let it finish
Now, run a Software Update. This can be done by clicking the Apple in the top left of the screen then clicking Software Updates.
Next, let's reset the printing system:
Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Default tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Finally, use this guide to reinstall: http://goo.gl/Na4Qm
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

OfficeJet Pro 8600 N911g cannot complete s/w installation on laptop running XP

Initially, successfully installed the 8600 s/w on a Dell D810 laptop running XP which is linked both via Ethernet and wirelessly to the same LAN as the printer. The printer is wirelessly linked to a port on a WAP device connected to the LAN/router. After setting up the router with DNS 8.8.8.8 and 8.8.4.4 addresses, successfully set-up e-Print function thru Verizon high speed internet connection. This confirms that the my LAN and Internet can see the printer connection through the WAP. Guess I should have left well enough alone, but I decided to also install the printer on my desktop, a Dell XPS desktop (also running on XP) that is linked thru a wired Ethernet connection to the same LAN.
The XPS s/w install was flawless and I can print from the desktop and HP e-print functions continue to work on the 8600, but I can no longer print from the laptop. As I mentioned, the s/w did load successfully on the laptop when I initially installed the printer. Following a suggestion on HP's website, I uninstalled the HP 3800 s/w in an attempt to reinstall the printer on the laptop. However, I have not been able to successfully reload the s/w on the laptop, despite numerous attempts.. The program can find the printer on the LAN, it always comes up with the same result: "The printer was unable to be installed over the network". I confirmed that there is no firewall or security setting blocking the s/w load.
As part of my problem resolution, I've also followed the procedures contained in HP Troubleshooting Your Wireless Connection but still cannot complete the installation process on the laptop. In my latest attempt to resolve the problem, I marked the 8600 as shared on the XPS desktop system, as suggested in another post, but suspect that would only affect USB-connected printers, not those that are wirelessly connected.
When I downloaded the HP Hardware Diagnostic Utility (HPHDU), it also was able to find the printer on the LAN but displayed a message: "We're sorry but the OfficeJet Pro 8600 N911g in not supported by this utility".
Can anyone offer a suggestion as to why the 8600 install worked successfully when initially loaded on my laptop but I cannot reload it? That could provide a clue as to what is blocking the reinstallation on the laptop. As I said, the desktop s/w loaded successfully and I can access the 8600's functions from there. Each of the HP utilities I downloaded from HP and have run on the laptop can find the 8600, but none can complete the s/w load so that I can use the printer from the laptop.
The LAN also has an Ethernet link to a HP OfficeJet 7310 that can be accessed from any PC on my network, so I reluctant to entirely remove all HP software so I can at least have one printer operational. I feel like I am on the bleeding edge of technology so any help is appreciated!
Thanks.

Hi,
Thank you for posting,
I see that you have issues with reinstalling the Officejet pro 8600 drivers on your DELL Laptop.
In order to resolve the issue, please follow the steps given below:
1. Please uninstall the printer drivers by going to Add or Remove programs in control panel. Then click on start and click on Run. In the run window, please type Taskmgr.exe and click on OK. In the task manager window, please click on the Process tab and check if there are any HP Processes running. If there are any HP Processes running, please select the process and click on end process.
2. Then click on Star and click on printers and faxes. Then the printers and faxes window, please click on File in the menu bar and then click on Server Properties. In the server properties window, please click on the Drivers tab and check if the HP Deskjet drivers are included. If you find any, please select the drivers and click on remove and then click on apply and click on OK.
3. Then go to C:\ProgramFiles\HP and delete the folder with the name of the name of the printer.
4. Then go to C:\Program Data\ and delete the folder with the name of the name of the printer.
5. Then go to C:\Windows\System32
And delete the HP DLL files related to the printer.
6. Then go to C:\Windows
And rename the twain_32 folder to twain_32_old.
7. Then click on start and click on Run. In the run window type %temp% and press enter. In the Temp folder delete all the files.
8. Delete HP Printer Software entries in the registry.
a. Click on Start and click on run. In the RUN window, plase type Regedit and click on OK.
b. In the Registry Editor window go to
HKEY_CLASSES_ROOT\Installer\Products and then click on each folder and check if that entry belongs to HP. If you find any entry related to HP, please delete it.
9. Then go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products\
and then click on each folder and check if that entry belongs to HP Printer. If you find any entry related to HP printer, please delete it.
10. Then go to C:\Documents and Settings\All Users\Hewlett Packard or HP Folder
And delete the folder with the name of the printer.
11. Then go to C:\Documents and Settings\User name of the computer\AppData\ Hewlett Packard or HP Folder
And delete the folder with the name of the printer.
12. Assigning the permissions in the registry.
a. Click on Start and click on run. In the RUN window, plase type Regedit and click on OK.
b. In the registry editor window, please right click on HKEY_CLASSES_ROOT and click on permissions.
c. In the Permissions window, please select each user and assign full permissions.
d. Then click on Add and type everyone and click on OK. Then select everyone and assign full permissions and click on Apply and click on OK.
e. Then right click on HKEY_CURRENT_USER and click on permissions.
f. In the Permissions window, please select each user and assign full permissions.
g. Then click on Add and type everyone and click on OK. Then select everyone and assign full permissions and click on Apply and click on OK.
h. Right click on HKEY_LOCAL_MACHINE and click on permissions.
i. In the Permissions window, please select each user and assign full permissions.
j. Then click on Add and type everyone and click on OK. Then select everyone and assign full permissions and click on Apply and click on OK.
k. Right click on HKEY_USERS and click on permissions.
l. In the Permissions window, please select each user and assign full permissions.
m. Then click on Add and type everyone and click on OK. Then select everyone and assign full permissions and click on Apply and click on OK.
n. Then right click on HKEY_CURRENT_CONFIG and click on permissions.
o. In the Permissions window, please select each user and assign full permissions.
p. Then click on Add and type everyone and click on OK. Then select everyone and assign full permissions and click on Apply and click on OK.
q. Close the Registry editor.
13. Then Click on start and click on run. In the run window type MSCONFIG and press enter. In the system configuration Window, please click on the Startup Tab and then click on Disable All and then click on Apply.
14. Then click on the Services tab and then check the box “Hide all Microsoft services” and then click on Disable all and then click on Apply and then click on OK.
15. Please restart the computer. Then click on Start and click on run. In the run window type Services.msc and Press enter.
16. In the services window, please right click on each service mentioned below and click on restart.
a. Windows Image Acquisition
b. Shell Hardware Detection
c. Remote procedure call (RPC)
17. After restarting the above services download the drivers from hp.com and start the installation.
Once the installation is completed, please try to scan and check.
Please follow the steps given above and that should resolve the issue.
If the issue still persists, please follow the steps given below:
1. Click on Start and click on Run. In the run window, please type services.msc and click on OK.
2. In the services window, please right click on the “Windows Image Acquisition Service and then click on Properties.
3. In the Properties window, please click on Dependencies window and check the dependencies.
It should be “Remote Procedure Call” and “Shell Hardware Detection”. If you find anything else, then you will have to change the dependencies of the services.
4. Close the Properties window and then make sure the Remote Procedure Call service and the Shell Hardware Detection services are Started. If any of these services are not started, please restart these services and then restart the Windows Image Acquisition service.
5. Please close the services window and then click on start and click on run. In the run window type regsvr32 shimgvw.dll and press enter.
6. You will see a Popup window on the screen, click on OK and close the window and then try to start the Windows Image Acquisition service.
If the Dependencies of the Windows Image Acquisition service is different from the one mentioned above, then please follow the steps given below to change the dependencies:
a. Click on Start and click on run. in the Run window type Regedit and click on OK.
b. In the Registry window, please go to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\stisvc
c. In the right hand side of the Registry editor window, please right click on DependOnService and click on Modify.
d. Then in the Value data filed enter
RpcSs and press enter and then type
ShellHWDetection
e. Then click on OK.
f. Then go to services and try to restart the Windows Image Acquisition service.
Afetr restarting the Windows Image Auquisition service, please try to reinstall the printer drivers.
Please follow the steps given above and that should resolve the issue.
Thank you.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Unable to Communicate with Printer. HP Officejet Pro 8600 N911g

Unable to Communicate with Printer. HP Officejet Pro 8600 N911g {Removed for privacy}
I cant even connect to the printer on IE, Firefox I get in just fine.
I have it set to only warn of ink when printing so what fix won't work
I noted my Firmware
I am on Win 7 64 bit

Are you receiving any error messages when you print from the desktop? Its possible the print spooler is having issues which is not pushing the jobs to the printer. Lets restart the print spooler to get any old jobs that could be stuck in the queue removed.
1. Press the start orb in the bottom left on the screen.
2. Click on "Run"
3. Type "services.msc" (without the quotes)
4. Locate the Print Spooler service in the right column
5. Click restart on the service link on the left
After it restarts the spooler go ahead and retry printing. Let me know if this works.
Thanks,
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Can't Login to Embedded Web Server for HP Officejet Pro 8600 N911g

I have a HP Officejet Pro 8600 N911g that I am trying to access in order to update the adress book for the scanner but in order to do that I must login. I have never set up a user name or password for it. Is there a default username and password?

Hello @jessescopely,
Welcome back to the HP forums.
I understand that when you try to access the EWS (Embedded Web Server) for your Officejet pro 8600, you are prompted for a username and password.
Unfortunately there is no default username or password.
On rare occasions this can be fixed by restoring the network defaults.
Go into the Setup menu.
Select the Network sub menu.
Choose Restore Network Defaults.
I have also sent you via private message the steps to reset your printer back to factory defaults.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
If neither of those clear the password, please call our technical support at 800-474-6836.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Officejet Pro 8600 N911g new firmware will not install.

My printer: Officejet Pro 8600 N911g
Current Firmware: CLP1CN1416AR
My problem: Downloaded the latest firmware update (Version CLP1CN1322CR). When I go to install it, my printer shows as listed, but in the STATUS cloumn, it is listed as "Not applicable".
I turned my printer on/off.
I tried updating via network, and when it checks for an update, it states there are no updates avaiable.
I tried updating via USB.
I tried updating via the LCD panel on the printer, and when it checks for an update, it states there are no updates avaiable.
Is there something wrong as to why this current firmware will not install?
Thanks for any help.

New Firmware (CLP1CN1416R) was installed automatically (Printer was set for "Auto Update"). Prior to new firmware install, printer has performed flawlessly...no problems. Immediately after printer updated it's firmware automatically I began to have multiple problems.
First, it kept asking me to perform an "Alignment" which I dutifully performed only to have message come back that 'Alignment Failed". Printed sheet looked fine, and printer printed fine but now before any page will print the "Alignment Recommended" message comes up which I have to then override (Click 'Do Not Align' button at bottome of 'Alignment Recommended' message box. This is getting really OLD!! Simply unacceptable for a business class printer!!
Also, the printer randomly has started giving other messages such as "There is a problem with the printer or ink system" AND "Cartridges are Missing" ("when I've just recently put in new catridges and levels are OK!!) AND "Paper Jam" (when there is no jam!!)
None of these problems have occurred prior to the automatic firmware update. I believe the reason HP hasn't posted the new firmware update to their Customer Service website is that they know there are bugs in it and don't want to compound the problems the new version has already created. I seriously question why an automatic updating of firmware was done with equipment set to "Auto Update" and yet that same new firmware is not available to those who might have had their printers set for "Manual Update".
HP Customer Service - You need to issue a statement from the company as to what has happened with this firmware update. If there are problems, take responsibility for it and make it right. HP knows who it sent out auto updates to. These printer owners should be immediately notified and the situation made right. It is not real assuring to have your front line staff not know why the new firmware is not on the website. I do not like the idea of having to pay for a Support Call when the problems with my out of warranty printer are directly tied to the Auto Updating of said printer with apparently defective firmware.
I'd really appreciate a response back from someone in HP Customer Service.

HP Officejet Pro 8600+ "There is a problem with the printer or ink system..."

I have an HP Officejet Pro 8600+ that is coming up with an error message. This just happened out of the blue yesterday. The printer is just over a year old.
It says:
"There is a problem with the printer or ink system. Print head missing not detected incorectly installed or incompatable"
I have removed and reinstalled ink cartridges, the head, unplugged, cleaned, etc. etc.
HP Officejet Pro 8600+
Product Number CM750A
Serial Number {Content Removed}
Not under warranty
Please advise.
This question was solved.
View Solution.

Sorry that you are experiencing this problem. Here is a link that may assist you with the ink system.
http://goo.gl/BXDFf
It seems to be a bad print head, or it needs manually cleaned with lint free cloth and water. If these steps do not resolve the issue, contact HP Support (1800-474-6836).
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Officejet Pro 8600 Plus - Scan software doesn't have 8.5x11 letter size option

Just bought a new Officejet Pro 8600 Plus.
The included HP Scan software will only let me choose A4 or A5 paper sizes (as well as 6x4, 7x5, 8x6, 10x8). No 8.5x11 option, which is what I want to use most often. (this is from the dropdown options after clicking the "Scan..." button)
Is there something I'm missing? I'm generally pretty good at figuring this stuff out, but I haven't even seen this issue mentioned on forums, so I'm confused.
Also, when using the Scan To Computer function directly from the printer, I get the same result - it will scan my 8.5x11 document and output an A4 size file.
I'm running Mac OS X 10.6.8. I have installed all software and firmware updates I could find. I have my printer's region set to Canada, and bought the machine from a Staples in Canada. Wondering why I can't use any North American size formats?

@Simple1234 - I have reinstalled the software from HP's website, and no change. (it's actually the same version that came on the installation CD - 12.23).
@Sethaniel - I have definitely tried every combination of settings in those drop down lists, so that's not it.
Ruling out OS issues, my girlfriend is running 10.8, and the HP software is doing the same thing on her computer.
Using the System Preferences scanning method, I can choose paper sizes if set to scan from document feeder. If I change to flatbed, I have the option to manually type in the dimensions I want, but then I'm forced to manually drag the crop area to which 8.5x11 portion of the flatbed it will scan. Again, there's no way to just have the flatbed scan a letter size document automatically when placing the page at the top corner of the flatbed, where it shows you to place the page for letter size.
This seems like the most basic function of a scanner! I'm really perplexed by this. I would imagine most people in north america would just want to place an 8.5x11 sheet of paper on the flatbed and have an easy way to scan the correct size with no added fuss.
Printing works fine, and I can choose letter size, and many adjustable settings, so I think this is just a problem with HP's scanning software. I have tried all the usual basic steps, like restarting my computer & the printer, reinstalling software, running software update, looking through all the settings in the HP Scan software, any global settings I could change in System Preferences, tried using a different computer and OS X version, googling the issue, and posting on this forum.
Any other ideas?

HP OfficeJet Pro 8600 Plus - "Scan to Computer" issue on Mac OSX 10.8 or 10.9

Hi...
I have started experiencing the notorious "scan to computer not working" issue on my 1-month OfficeJet Pro 8600 Plus, after having used the feature a number of times flawlessly.
There are a lot of potential solutions mentioned in dozens of relevant posts for both Mac and Windows, e.g.:
"Failed to open a session on the device"...
Scan to computer does not work...
Problem scanning to computer with an 8600 wireless
Unable to enable print to computer...
Enable Scan to Computer - Communication Error
Officejet Pro 8600 Utility does not show my Mac computer in scan settings
A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning
HP Wireless All-in-One Printers - Communication Error between the Scanner and Your Computer...
Etc.
However, in my case, no solution works, after several frustrating hours of trying to fix the issue, in Mac OS X Mountain Lion (10.8), or after upgrading to Maverics (10.9).
The behavior of the device points to a software issue, since:
The printer is visible on the network
The print function has been working fine
The HP Scan function works
The generic Scan function from System Preferences works (although in earlier times it did not, or it stopped working soon after invoking it)
The "Scan to Computer" option does not appear in the HP Utility screen (although occasionally, after random sequences of unistalling and installing the software, it reappears)
The HP Installer crashes before completing the installation (this is a latest symptom, apparently happening before unvoking the HP Setup Assistant, which still works fine)
As already mentioned, I have tried all possible solutions, including software and firmware updates, Apple drivers, HP drivers (full featured software), clean (un)installations, followed by computer and printer restarts. Nothing seems to work.
The "Scan to Computer" feature of the 8600 always works on my Windows 7 laptop, after initial configuration.
The next step will be returning the device for a refund, but before resorting to that, I am giving it a last chance, in (the unlikely) case there is something new I have not tried yet.
Thanks,
PNS

facman
I am linking you to an HP Support document titled “Uninstalling the Printer Software” below. I am also providing you the link to the HP software for your printer titled “HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8” below as well.
Follow the first document and uninstall the software. Reboot the computer than download and install the linked software. This should resolve your issue.
Uninstalling the Printer Software
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02259020
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
http://ftp.hp.com/pub/softlib/software12/COL44234/mp-107214-1/Officejet-Pro-8600_v12.23.0.dmg
Please feel free to re-post if you have any further questions or concerns we are here to help.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

HP Officejet pro 8600 plus Scans show up as blank pages on Macs okay on PCs

Scans made on HP Officejet Pro 8600 Plus show up okay on PCs buas blank pages on Macs. Any ideas? I can copy them into Publisher and then save it from Publisher as a pdf and Macs get it okay. Prefer not to have to do this

Hi @JimmyParker
I would like to help you scan to your Mac. I understand that currently your scans are showing up as black pages, but only when you scan to the Mac.
I suggest uninstalling and reinstalling the software. Please use the instructions below to complete a more comprehensive uninstall than the basic uninstall.
Scrub/ Uninstall
Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
Click continue, click on one of the printers in the list.
* Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
Click uninstall.
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software and install it.
HP Officejet Pro 8600 series Full Feature Software and Driver- OS X 10.9 Mavericks
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
When you add the printer, please ensure you are using the HP driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can the printer driver
Please let me know if you can scan now. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP Officejet Pro 8600 not scanning to computer

My HP Officejet Pro 8600 is not scanning to my computer HP computer, Windows 7. This has worked fine for quite some time, not sure what happened to change it. It is a wireless connection but the printer works, and I can scan to a memory card just not to the computer. The printer software doesn't give me the option of opening the scanner. Another program said the scanner is not enabled but nobody has touched the computer! Any suggestions in language I can understand would be greatly appreciated!

Too bad nobody answered yet. It sounds like some simple troubleshooting can help narrow down the problem, but I'm no expert and all I can suggest is to try posting the question to http://answers.microsoft.com/en-us/windows/forum/windows_7?tab=Threads.

Scanning a 4 x 6 photo, new HP Officejet Pro 8600 automatically scans the entire glass area.

The 8600 forces me to crop the scanned photo. My old 8500 automatically recognized only the photo (or multiple photos if more than one) and presented them as cropped final images. How can I do the same with the 8600? It is an Officet Pro 8600 Premium. I have a lot of photos to scan and it will take a long time if I have to crop each one. Why would HP go backwards in capability on a newer more expensive printer?

Hi Mar_R,
I saw your post on another forum thread I worked on previously; Re: Multiple photo scan on Officejet Pro 8600. I would like to help answer your inquiry and adjust your settings to auto crop your 4x6 photos.
Mar_R wrote on the other thread:
I just posted a related problem elsewhere in the forums with my new 8600. I have to wonder though, how can this be a Windows related problem, as only two days ago, when I had my 8500 running and connected, it could scan and recognize multiple photos and save them as separate files. I am running Windows 7 Professional 64 bit by the way, on an HP all in one computer. Yesterday, I uninstalled my 8500 driver and the 8500 HP Solution Center Software, and installed the new 8600 software and there is no function to recognize individual photo scans. In the hour or so between uninstalling the old HP printer software and installing the new, there were no updates to Windows. I submit that this is an oversight or ommission by HP from the software included with the printer. But I am puzzled as to how they can justify going backwards in capability from an older printer to a newer and more expensive one.
My response to the individual I was working with was "You can not set the scan option to detect separate items on the Windows operating system any more. This is clearly a feature that was removed from the software. I even tried checking 3rd party software programs with the hopes of bypassing the limitation the HP newer software has created.
The only glimmer of hope I could find is that I believe the newer printer software, v33, has re-added the feature. I suspect the customers were heard. I mean I imagine you are not the only one that has come across this and expressed the desire to be able to detect separate items when scanning."
I made no reference to this being a Windows issue. This feature is available when scanning to a Mac, but the version of software is different. In fact, scanning to a Mac and scanning to a Windows operating system are entirely different and incomparable.
I hope this answers your inquiry. As for finding a solution to the issue you are experiencing, it sounds like the issue is not actually detecting separate items, rather you are trying to scan 4x6 and have it auto crop so you do not need to manually crop each scan. If this is correct, please use the instructions below.
Open HP Scan, create a new shortcut, change the Scan Size to 4x6.
Now you will not have to crop the image each time you scan, all you have to do is choose the appropriate scan shortcut. I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

OfficeJet Pro 8600 N911g SNMP

Hi,
The device has SNMP v1 only in the configuration. I tried installing the latest firmware (CLP1CN1322CR) but this did not update the SNMP to a newer version.
I need to have either version 2 or version 3
Thanks

Hi AmJaDoOoF,
Thank you for your post. I have taken a look into finding a file for the Officejet Pro 8600 were you would be able to monitor the printer. At this time I am unable to locate any software or file that would be able to help you with this.
Thank you again for your post.
I worked on behalf of HP

HP Officejet Pro 8600 N911g Scan to gmail with 2-step verification

Similar Messages

Maybe you are looking for