HP Officejet Pro 8600 Plus not able to use full features

HP Officejet Pro 8600 Plus (Model No. N911h)
Serial No.[Personal Information Removed]
Windows 7 Professional Service Pack 1
The printer is being used on the desktop as a network printer. Windows Firewall is turned off. Office uses Trend Micro Antivirus. Able to use full features like digital fax, print, scanning only when Trend Micro Office Scan is offloaded. Printer was taking dynamic port so created Standard/TCP-IP port created. Even this did not solve the problem. Trend Micro administrators say the port is open. Not sure if anything particularly needs to be allowed by Trend Micro. Spoke with HP support system over phone. They are also not sure what is to be done rectify the problem.

Hello,
I see that you're having an issue unblocking ports for the printer.
Here is a list of the ports that needs to be unblocked. Hopefully this will help.
Incoming ports (UDP) are destination ports on the computer while outgoing ports (TCP) are destination ports on the
HP device.
• Incoming (UDP) ports: 137, 138, 161, 427
• Outgoing (TCP) ports: 137, 139, 427, 9100,
9220, 9500
The ports are used for the following functions:
Printing
• UDP ports: 427, 137, 161
• TCP port: 9100
Photo card upload
• UDP ports: 137, 138, 427
• TCP port: 139
Scanning
• UDP port: 427
• TCP ports: 9220, 9500
HP device status
UDP port: 161
Faxing
• UDP port: 427
• TCP port: 9220
HP device installation
UDP port: 427"

Similar Messages

HP Officejet Pro 8600 Plus Not Recognized On The Network

I have a CenturyLink DSL Modem/Router that has 4 ports on the back. I use Port 1 on the DSL Modem/Router to conntect to my NetGear Router. I use Port 2 on the DSL Modem/Router to connect my HP OfficeJet Pro 8600 Plus printer. I use Port 3 on the DSL Modem/Router to connect my Brother MFC-7360N printer. I am not using Port 4 of the DSL Modem/Router.
My NetGear Router is used to connect all wired desktop PC's (5) in the house.
I was able to successfully install the software for the Brother printer on all computers and can print on the Brother printer from any of the desktop pc's.
I have the software for the HP printer installed on all computers but on the WIN XP desktop pc I cannot detect the printer on the network. During the setup process the software detects that the HP printer and the WIN XP pc are connected to two different routers (the DSL Modem/Router is being detected as a router by the WIN XP pc). On the other desktop pc's which are running either WIN7 or WIN8 there is no detection problems even though the printer is connected to the DSL Modem/Router while the PC is conntected to the NetGear Router.
Does anyone have any knowledge as to why I am having this problem. The problem seems to be only with the WIN XP pc and not with the WIN7 or WIN8 pc's.
This question was solved.
View Solution.

You are running a double NAT scenario, not good. Simple fix, put the gateway unit (modem/router) in bridge mode, which will disable the router functions and just make it a modem. Now connect the Netgear router to the gateway unit and have this handle all your wired and wireless connections.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Officejet Pro 8600 Plus, not appending number in sequence to base file name when saving PDF.

Officejet Pro 8600 Plus (new today - everything else working great), Vista 32-bit, HP desktop.
After scanning documents and creating a PDF file (Save to file on my computer w/USB connection), using HP Scan, it does not append numbers in sequence to base file name. HP Scan (Under Advanced Settings/Destinations) reads that it will do this (when you over over the base name field). Perhaps I have to enable something. Do you know how I can do this? Thank you.

I'm not really sure what's going on. The install might not have written right. Try uninstalling and installing from a fresh download. Let me know what happens.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Officejet Pro 8600 N911a not able to air print since Maverick update

My Officejet Pro 8600 N911a worked fine printing wireless before the newest Maverick upgrade. Now it will only print one print job after I turn the printer off and then back on. If I connect the computer to the printer, it seems to work fine, so it has to do with the upgrade and airprint. I have just downloaded the current Mavericks plug in, but there is no change.

When you say Airprint, are you printing Wireless diect to the 8600 or is the 8600 connected to your wireless network?
When you say the latest plu-n, do you mean the update from Apple Software Update (Apple Store) or the full 10.9 solution from HP.com?
In either case I would recommend first just deleting the print queue on the Macintosh and re-adding it. If that does not resolve the issue try resetting teh print system and adding the printer back new.
Try performing a "reset print system" on teh Macintosh and then reconnecting to the printer.
To reset the print system perform the following:
1. Open System Preferences
2. Click on the Print & Scan
3. click or click in the box listing the current print queues.
4. Select Reset printing system...
5. Enter admin User Name and Password
6. Reboot the Macintosh
7. Try setting up the printer again
I work for HP

Officejet Pro 8600 Plus not connecting

My printer has stopped connecting to my computer. When I click on the control panel on the printer for wireless connection, it tells me that the wireless connection has been disabled and I should contact the printer's administrator. I am the only user of the printer, so this is not an answer. I have spent hours trying to get this printer to connect to my MacBookPro, and it won't recognize the printer even with a cable. And the printer driver seems not to have been updated for over two years (a link to an alleged more current version leads to a dead web page). I have run the HP wireless setup software on my Mac repeatedly but it fails to connect to the printer.

Hello @JeanneS1 ,
Welcome to the HP forums.
I understand that you are haveing a problem connecting to your 8600 Plus over the wireless network.
I would like to help.
I would doubble check the wireless on the printer.
Touch the wireless icon, if it has an IP address Type it inot safari and try to reach the EWS.
If it does not have an IP, or says no link, go into the setup menu.
Then go into the Network sub menu and select the wireless setup wizard.
If the printer has an IP address and you can't reach the Embedded Web Server (EWS), I would power off the printer.
Then unplug the power to your router of one minute. Plug the power back into the router and turn the printer back on.
When the blue wireless light on the printer stops blinking try to connect the printer again.
If the newtork connection is fine, I would uninstall the HP software again.
Then I would verify and repair the disk permissions.
Once that is done, check for Apple updates.
Restart/reboot the Mac.
Install the HP software again.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Officejet Pro 8600 Plus not working wirelessly with MacBook Air 10.9.2

Downloaded drivers did not work - Apple cannot solve. When I tried installing the software from the disk it says it is only compatible with OS 10.7 or below. Mine is 10.9.2
I have two of the Officejt Pro 9600 Plus printers in separate locations and have the same issue with both printers.

Hi Danecrazed, maybe this link below can help you. This will direct you to download the Mac HP software for 10.9 support.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4159&lc=en&cc=us&dlc=en&sw_lang=&product=4323...

Printing custom sizes on HP Officejet Pro 8600 Plus from Macbook Pro

I am having trouble setting up a Word Document (Word for Mac 2011) to print in a custom size on my HP Officejet Pro 8600 Plus. I'm using a Macbook Pro running Yosemite.
I would like to print on a card stock that is 4.5 in x 13.5 in. I have tried under Page Setup to create a custom size under Manage Custom sizes, however, I'm hitting a brick wall. The printer gets the job but can not feed the paper. I've also tried to set my default paper size under my System Preferences/Printers and Scanners to be this size...still not working.
Please help!

Hi @klinecard
It is important to ensure the paper size you are selecting is a supported size, and make sure the weight is supported too.
Printer Specifications for the HP Officejet Pro 8600 e-All-in-One Series Printer Series
Please look under paper handling.
If your desired size and weight is supported, you might find the following helpful; Create Custom Paper Sizes in Windows 7, Windows 8, and Mac OS X
Truthfully, since you are not getting an error message, I suspect you have correctly setup the custom size, this issue is most likely the printers inability to feed the paper you are using.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP Officejet Pro 8600 Plus (UK purchase) will not connect to wired ethernet network

Hi
We have an HP Officejet Pro 8600 Plus (purchase here in UK approx 9-12 months ago) which has sort of worked OK wirelessly but finance industry compliance requirements now require me to connect to it by normal ethernet cable.
When I disable wireless and plug in a (tested and working) ethernet cable it does nothing. I have done a factory reset (via the screen menu) to remove any previous settings. Turned off, turned on, still nothing.
I have restored Network defaults also using the menu command within settings - network; no difference.
In Network - wired summary the screen says:
IP: Not applicable
MAC: xxxxxxxxxxx (not for sharing here)
Hostname: xxxxxxxxx (not for sharing here)
Wireless Direct: Off
I have tried it with IP settings turned to Automatic (DHCP) - no joy.
I have tried it with IP settings turned to Manual(Static) - when i then type in the static IP address that is within the router range (but outside the DHCP reserved range) as soon as I press Done, the settings are lost i.e. 192.168.0.102 - push 'Done' and the IP goes back to 000.000.000.000
The same when entering the default gateway and subnet masks.
I have restored to defaults several times, tried manual and DHCP several times, no joy.
Please let me have some serious suggestions at the earliest opportunity. Just to reiterate I have tested the network connection and cables with other ethernet equipment and they are working. My questions include:
1. Anyone know how to make this printer actually store the manually entered IP addresses etc?
2. What am I missing about the wired setup?
3. Is this a known issue? Is it an issue with the hardware ethernet socket or something?
4. Also in this forum there are references to a Hard Factory reset that is apparently different to the menu 'Reset to Factory Defaults' but links to an article about it just give a 404 error, not found. [Does HP actually have two different levels of Factory Default and if so, God knows why! Does anyone know a working link to this information please?

Hello Qw8, welcome to the forums!
I read your post about not being able to successfully install your Officejet 8600 Plus to your wired network. I will do my best to find suggestions for you to try. I would first like to know which Operating System you are installing the printer on to help me with my research.
If you haven't already, run the installation (HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g Drivers) with your security and firewalls disabled to see if the proper connection can be made.
I do see you ask about other resets and there are others however, at this stage they may not be needed. If they are, I can send you a private message at that time with that information.
Please let me know your OS and we will go from there!
Have a wonderful weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Windows Server 2012 Standard - HP OfficeJet Pro 8600 Plus printer not working after promoting to Domain Controller / AD Services

An associate and myself installed the built-in drivers for the HP OfficeJet Pro 8600 Plus multi-function (network) printer on a Windows Server 2012 Standard server installation and everything worked fine whenever I want to print anything directly from the
Windows Server machine (there's a reason for this, so please understand that ;) ).
We were able to print without any problems from the Windows Server 2012 machine, using the drivers from Microsoft. Mainly, because HP has not listed any specific support for Windows Server 2012, only Windows Server 2008 R2, however, the drivers that
came with Windows 2012 seem to work very well.
PROBLEM: I later had to promote the Windows Server 2012 to a Domain Controller, and created the Active Directory configurations, even enabled the Print Services. After doing all of that, the HP printer will not print anything. It's like all print
requests directly from the Windows Server go to Nil.
Has anyone encountered a problem like this before? The only thing I can think of is that after perhaps something affected printing directly once we promoted the server to being a DC, and added other features / roles. I even tried installing the
HP drivers for Windows Server 2008 R2, and the results are still the same...nothing prints. Trust me, the printer is set as the Default Printer and even when choosing to print, we make sure the HP OfficeJet Pro is selected, and is on, as other Windows
Client PC's can print to it directly.
Does anyone have any suggestions we could try? Thanks in advance.

While it is quite a while since this was posted - I can concur a similar issue exists.
We have spent the better part of a day trying to work out why other HP printers work fine but our 8620 prints are not printing and going to Nil. The print server is hosted on a shared DC. Comparing to the initial posters details, for some reason
it seems to be most commonly related to the OfficeJet Pro 8600/8610/8620/8630 series printers.
I ended up doing a print server migration from the domain controller to stand alone host and all printers now work from a single server rather than a mix. Domain controller OSes varied from 2008, 2012, 2012 R2 (tested with multiple) and only after
all of those failed then tried a stand alone server os machine as a last resort which worked fine. Printing directly from Win 7 / 8 /8.1 clients to the IP always worked.

HP OfficeJet Pro 8600 Plus will print wirelessly but not scan

I have a HP OfficeJet Pro 8600 Plus all in one printer/copier/scanner. It's worked fine for the several months I have had it. But now suddently the computer does not recognize the scanner. I am connected to the device wirelessly and can print but not scan. I haven't been able to figure out why the comptuer recognizes the printer but not the scanner. I uninstalled and reinstalled the device but still no success.
Any ideas how I can get the computer to recognize the scanner? I am running Windows 8. Have not updated to 8.1.

Hello Sarah1234, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scanning issues. I would like to help.
I would recommend powering off your printer and computer. Once they are both down, I would recommend unplugging the power from your wireless router for 60 seconds, and then plugging it back in. Once it has begun broadcasting again, power on your printer and computer.
I would also recommend downloading and running the HP Print and Scan Doctor. Once you have launched the tool, select the 'fix scanning' option.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Officejet Pro 8600 Plus prints with some programs, but not others.

I have a new Officejet Pro 8600 Plus connected with an Apple Airport Extreme. My iPad and Dell will print without problems. My MacBookPro using OS 10.6.8 will print iPhoto and Excell when using Parallels. It will not print using Appleworks or Office for the Mac. The Mac recognizes the printer and will print the test page. When told to print in Appleworks, the computer says it is printing, but nothing is happening.

Hello homeonthefarm,
Welcome to the HP Support Forums!
I understand you are able to print from an iPad and Dell PC with the Officejet 8600, but unable to from your Mac 10.6.8. Since it will print from the other sources it would appear to me that the printer software is not installed correctly on the Mac.
Try uninstalling the printer software, when you are running the HP Uninstaller, just prior to clicking uninstall I would like you to hold down the Control, Option & Command button then click uninstall.
When ready to install the printer, HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8.
I hope this suggestion helps.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

OfficeJet Pro 8600 Plus Wireless DOES NOT WORK with Mac Mavericks Based Network

Replaced my Brother system with the HP OfficeJet Pro 8600 Plus yesterday. There are many positive features of the 8600 Plus that prompted me to purchase it...
Modular Design
Large legal sized Scanner
Standard/Legal Paper Printer
Copy
E Print Capability
High Yield / Affordable Toner Replacements
Unfortunately, I discovered the Wireless network capability is less than desirable. After hours of installing, reinstalling, work arounds, internet solution searches, it just will not work. If you are able to get the printer to work on your network (with router), the scanner will not be visible, vice versa, etc...etc...etc...
HOWEVER, I did discover this solution. If the unit is near your base computer, install it to your computer with a usb connection. That allows you to have scanning and printing from that unit. Then you can connect the unit through its ethernet connection to your router. From there all computers can print within your network. It's not the best way to connect a WIRELESS printer, but at least it works.
I'm not certain why HP and Apple can't find a solution, but I never found anything on the net that worked. The problem seems to stem from the new Mavericks update from Apple, but I'm really not sure. I wasted an entire day of productivity attempting to make it work. I'm posting this so you don't make the same mistake. If you happen to know a verified solution, then I would welcome the information. Best of luck!!!

It may be a mac driver issue. Try installing the bootcamp update for your version of vista from here:
http://www.apple.com/support/bootcamp/
I'm not sure if this is supposed to work since I've never tried mac hardware at 5ghz on windows before...

HP Officejet Pro 8600 Plus will not copy even after hard reset

HP Officejet Pro 8600 Plus on Windows 8 OS
Will print from computer; will scan documents & save to computer; will NOT copy document on the unit.
Shut down printer; unplugged from wall and back of unit; held on/off button for 60 seconds; plugged back in; started unit.
Placed document on glass; hit copy; hit black; Unit pulls sheet of paper; unit scans document (squeaks while scanning); after period of time, it spits out paper & reads "copy cancelled", but does not clear or return to home screen.
HELP!!
This question was solved.
View Solution.

Hello,
Please check your private message inbox for the reset I'm going to send you.

HP Officejet Pro 8600 Plus will not print from my MacAir

I have used my MacAir to print on my HP Officejet Pro 8600 Plus for about 5 months without any problems. All of a sudden my printer will not print. The wireless icon says it's connected to the network. But when I click print it says "looking for air printer" and then "printer not connected". I've repeated the Wizard Set Up for the wireless connection. I've turned the printer and computer on and off. I've even tried printing from my iPhone but it will not find the printer anymore. Please help!

Hello @ladybonds ,
Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
You are saying that you have been printing fine from your computer for 5 months and now your printer says it is connected to the network and your computer says that it isn't.
Have you recently upgraded to Yosemite the new Apple OS? If not what OS X are you using?
Are you sure that the printer and your devices are on the same network?
Does the router give your printer an I.P address?
Let me know these answers and we can go from there.
I worked for HP.

Hp officejet pro 8600 plus - connected to the wireless but AirPrint not working

i have an hp officejet pro 8600 plus. had it for 6 months or so. intial setup went fine...connected to the wireless network with no problems...airprint worked instantly from all of my apple devices. recently, in the last 3 weeks, airprint has stopped working. when i turn the printer off and turn it back on, airprint will work for about 5 minutes. but then it stops working. it is like the printer is losing wireless connectivity, but the wirless diagnostics show it to be connected fine.
i have an apple airport exptreme router. it is showing to be connected just fine to the network and i can see the printer's mac address as a wireless client in the Airport Utility.
any ideas?

Hi henryje,
Sorry to hear you are experiencing these issues. I would be glad to help.
Try changing the channel on the AirPort Extreme router to channel 11 or any channel that seem less congested.
You can check you network channel environment by printing a Network Configuration page from the Wireless Settings menu on printer front panel. The second page of the printout will display all detected networks by the printer listed by signal strength. You can also use InSSIDer: http://www.techspot.com/downloads/5936-inssider.html
Printers also do not support the 5GHz band, so if your network uses 5GHz only, you can disable this in the AirPort Extreme router config page.
Say Thanks by clicking the Thumbs Up in the post that helped you.

HP Officejet Pro 8600 Plus not able to use full features

Similar Messages

Maybe you are looking for