HP Officejet Pro 8600 Plus will not print from my MacAir

I have used my MacAir to print on my HP Officejet Pro 8600 Plus for about 5 months without any problems. All of a sudden my printer will not print. The wireless icon says it's connected to the network. But when I click print it says "looking for air printer" and then "printer not connected". I've repeated the Wizard Set Up for the wireless connection. I've turned the printer and computer on and off. I've even tried printing from my iPhone but it will not find the printer anymore. Please help!

Hello @ladybonds ,
Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
You are saying that you have been printing fine from your computer for 5 months and now your printer says it is connected to the network and your computer says that it isn't.
Have you recently upgraded to Yosemite the new Apple OS? If not what OS X are you using?
Are you sure that the printer and your devices are on the same network?
Does the router give your printer an I.P address?
Let me know these answers and we can go from there.
I worked for HP.

Similar Messages

HP Officejet Pro 8600 Plus will not print the attached file in the e-mail

Dear support team,
I have installed the software and setup HP eprint according the manual respectively the advices in HP-Connected however if I send an e-mail to [edited by Moderator] the printer 8600 PRO PLUS will not print the attached file in this case a PDF. But the text inside the e-mail will printed.
Any recommends?
Thank you in Advance.
Best regards
Conny

Hi Conny,
Welcome to the HP Support forums. I understand that the attachment to an email sent to your Officejet Pro 8600 Plus printer’s ePrint email address did not print.
After the PDF didn’t print, did you log into your HP Connected account? I’m curious as to what HP Connected indicated about the print job. I have included the ePrint Job Did Not Print document. It has several causes and solutions as to why the PDF didn’t print.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Officejet Pro 8600 Plus will not print but is connected and says that the print job is 100% Complete

Hi All,
I'm printing from a MacBook Pro using OSX Lion. It says that Officejet Pro 8600 Plus is connected and that the print jop is
100% complete except that nothing comes out of the printer. I've done all of the test prints and they've printed just fine.
I tired all of the troubleshooting steps listed on the support guide and still nothing. HELP!

Not a reply but another plea for help.
There seem to be so many people with wireless problems that a) it seems silly to start a new thread and b) which one to enter my own plea.
-Printer bought about 2~3 weeks into Sept 2012
-Installed onto Macbook Pro running Lion (full updated at that time)
-Both wireless scanning from printer to computer and initiated from computer worked fine.
-Printer, with full choice of duplex, layout etc, worked fine. (Even left 5star feedback somewhere!)
-Set up eprint. That OK, too. Fine from iPad2 and SE Arc S printing photos.
-Somewhere along the line it stopped communicating with my MBP
-Out of interest, since there seemed to be no problems with an Acer laptop running Vista, I booted the MBP from an external drive on which I'd done a backup of my 10.6 system iMac (>300Km away: can't try that). Installed HP software from disc. Seemed fully functional. Odd. Very odd.
-Restarting with Lion on MBP, tried again. Looks as if it might work, but loses connectivity. Tried manual address on printer.
-Booting from 10.6 system again, reinstalled Lion on MBP (wondering if conflict between HP and Apple updates)
-Reinstalled HP software from disc.
Still didn't work.
-Brought Lion up to date. Downloaded most recent dmg file from HP. Looked for updates. Have applied firmware update to printer
8600 doesn't list my MBP as available computer to scan to
[But all the test pages done whilst in HP Utility, and others, get sent through]
Am getting rather fed-up with all this; never, ever before have I had so much printer problem.
There seem to be a number of Lion users out there with the same problem. So far -but very infrequently tried- other machines/systems seem OK, therefore I am coming to the conclusion that it is an Apple<> HP conflict. If not sorted soon the printer will be returned as it is not fit for purpose. I'll revert to using my seldom problematic, non duplex A3 Brother.
Hrumph
Please help, someone! Either with a pointer to something I've not yet tried or by analysis and rapid availablity of updated software.
Thanks,
Mike W

OfficeJet Pro 8600 Plus will not print

My Macs running 10.10 are not able to print from my printer. I have reestablished wireless connections and have also ensure the latest updates to the printer were downloaded. Nothing has worked. I have also tried to download new drivers but I cannot download them. After clicking download, the page just brings me back to the select language page. Anyone else have this issue or know how to solve it?

Hello,
Jamieson
HP Support Agent
I have a Macbookpro that stopped printing wirelessly to my HP printer. I tried everything I could think of then an Apple rep worked on it for 45min with no luck. I then followed your suggestions. PRESTO!
THANK YOU!
Neal

My Office Print Pro 8600 Plus will not print pdf files sent to it from an iPad using ePrint.

My Office Print Pro 8600 Plus will not print pdf files sent to it from an iPad using ePrint. I just get an error message when I go to the HP Eprint centre. It does print the cover e-mail but nothing else. The attachment is not secure as far as I can see. I have tried sending an attachment from my Mac and that worked fine.
This question was solved.
View Solution.

Hello krnkln3.
Are you trying to send the PDF as an attachment in an e-mail sent to the ePrint e-mail address of the printer or are you trying to print using the ePrint app?
Try sending the same PDF document to the printer's ePrint e-mail address and let us know if that works. If this works but using the ePrint app is not working, maybe the ePrint app is not working fine with this PDF document (it could be due to it's size or something else). Remember that you can always use the e-mail ePrint address of the printer to send PDF documents as the processing is happening at the HP servers and not in your iPad as when you try to send it using the ePrint app.
Cheers!
Wixma.
I am an HP employee.
Say thanks by clicking the Kudos star in the post.
If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

HP Officejet Pro 8600 Plus will not copy even after hard reset

HP Officejet Pro 8600 Plus on Windows 8 OS
Will print from computer; will scan documents & save to computer; will NOT copy document on the unit.
Shut down printer; unplugged from wall and back of unit; held on/off button for 60 seconds; plugged back in; started unit.
Placed document on glass; hit copy; hit black; Unit pulls sheet of paper; unit scans document (squeaks while scanning); after period of time, it spits out paper & reads "copy cancelled", but does not clear or return to home screen.
HELP!!
This question was solved.
View Solution.

Hello,
Please check your private message inbox for the reset I'm going to send you.

OfficeJet Pro 8600 plus will not install , msg Call to DriverPackageInstall returns error 5

I get message "Call to Driver Package Install returned error 5 for package -c\Program Files\HP\HP OfficeJet Pro 8600\Drivers Store\Pipeline\hpup\03.inf-Call to Driver Package Install must be a member of th eadministrator group to install a driver package. Laptop is HP, Core 5, running Win 8.1
No security messages arose during very slow install.
Tried several times, tried to download installation package as suggested btroubleshooter but aborted 4 times (4 hours), other downloads had no problem. Tried changing startup as indicated also, did not correct the problem.

Hi Liam,
The installation CD that came with your 8600 will definitely not work with Windows 8.1 and is not same as the latest online download which you will need to install on Win8.1.
Are you running Win8.1 Pro 32 or 64 bit?
Also make sure you select the right model of your Officejet. There are 3 different models.
HP Officejet Pro 8600 Plus e-All-in-One Printer series - N911
HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g
HP Officejet Pro 8600 e-All-in-One Printer series - N911
HP Officejet Pro 8600 e-All-in-One Printer - N911a
HP Officejet Pro 8600 Premium e-All-in-One Printer series - N911
HP Officejet Pro 8600 Premium e-All-in-One - N911n
Try uninstalling printer from the control panel and reinstall using the Win8.1 download from the link above.
Thanks

Officejet Pro 8600 Plus will not send or receive fax

I have connected the fax machine to the phone outlet, the fax machine dials to another fax machine, the connection sounds like it is being made (the receiving fax machine sends out a noise signalling that it has received a phone call) and then the HP Officejet Pro 8600 Plus says that is is "Connecting" but no fax is sent. Nor can I receive a fax, even though the phone rings on the Officejet Pro 8600 Plus. The error code I get is Error 388 which is that a communication error occurred during fax transmission. However, this message occurs regardless of the fax number that I send to, and I had the recipient check that the receiving fax machine was working fine for transmittals from others.
Is it possible that the proble is that I cannot send or receive faxes through a digital phone line? That seems odd to me given that almost all phone lines in the modern era are digital. How do I send and receive faxes with the Officejet Pro 8600 Plus if the only phone lines available are digital? Also, 4 months ago, I used the same phone line for the same machine, and the fax function worked, but my phone provider assures me that the only phone lines that they have ever provided are digital.
Thank you.

Hello,
I am sorry to hear you are having issues with the fax functionality on your Officejet 8600 plus. I have found a document that has several troubleshooting steps you can try to narrow down the issue. I know some of these steps you have already done, but there might be a few that you haven't, like there is a HP test fax service you can use to test functionality.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02891758&cc=us&dlc=en&lc=en#N226
Good luck!
I work for HP, However, I am speaking for myself and not for HP

HP Officejet Pro 8500A Plus will not print

My 2 month old printer will not print unless I open and close the print cartridge door. The printer screen says it is printing, but nothing happens. I have followed all of the steps on line, but nothing works. Anyone else have this problem?

Does your printer display "Printing..." on the control panel, but never prints?
I had such a problem. The only way I could get mine to print was to unplug the power cord and plug it back in.
I found the problem was an "expired" ink cartridge. I replaced the cartridge with a new one and the problem went away. Check your ink cartridge statuses by using the Control Panel functions. If you see one that is expired (my panel displays a yellow exclamation mark on that cartridge's icon), try replacing it and see if the problem goes away.
My problem occurred whenever the printer went into "standby" mode. I think when it wakes up it checks the cartridges and when the firmware finds an expired cartridge it locks up. Just an educated guess.
Good luck! And if this helps, please click the Kudos button for me.

HP Officejet pro 8500A plus can not print from ethernet connect computer

Setup:
HP Officjet Pro 8500A Plus connected to a netgear wireless router using wired ethernet.
Desktop with windows7 connected to the same netgear wireless router using wired ethernet.
Can print from other computers connected to the the wireless router using wifi but can not print from this desktop connected using the wired ethernet.
Can not print from the Windows7 PC which is connected to router over wired Ethernet. Printer is connected to the same router using wired Ethernet. Other notebook connected to the router over wireless prints.
Windows7 device & Printerhows printer is ok.
Once a job is sent to printer, show status printing for a while after the status will show error.
Now the status shows error
HP Print and Scan doctors shows printer ok.
But if you try to print the test page, unable to communicate to printer error comes.
Tool box can read all information about the printer

Please reload the drivers and software on the Win7 PC. Reconfigure and try again.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Officejet Pro 8500A Premium will not print from my laptop

I have an Officejet Pro 8500A Premium. I jus had ot reload my driver thinking it would resolve the below issue but it did not. The connection string is laptop -> docking station -> ethernet to router -> ethernet to printer. On my laptop I can see the ink levels of the printer so there is a connection but when I attempt to print and select the Officejet 8500 (non fax) printer, it attempts to print to the 8500A fax and then pops up with a fax box.
Additional Information:
I have tried the following:
- Changed the port for the 8500A fax
- Tried to set the default printer from the fax to the network printer - received an error message: Operation could not be completed (error 0x0000709). Double check the printer name and make sure that the printer is connected to the network.
This question was solved.
View Solution.

Hello coolhandluke2,
Welcome to the HP Forums.
I see that you are having issues when attempting to print from your Laptop.
I also see that you are getting an error 0x0000709.
I do have a few suggestions we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I am also going to give you a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error Me....
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Officejet Pro 8600 Plus will not maintain "wired" connectivity

Get a message "Unable to communicate with printer". The printer is direct wired to router, but for some reason will loose connectivity. Rebooting cable modem and router seems to fix for a while. Anyone know of a solid fix to this problem?

Hi,
What operating system you use on your computer? which security programs you use on your PC?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Officejet pro 8000 wireless will not print from windows photo viewer. all other diagnostics ok.

OS is Windows 7 Home Premium x 64. All functions and printing are ok with this unit, excepting for printing through Windows Photo Viewer. Have latest software, drivers, etc., and all HP software and hardware diagnostic tools check out ok.
Checked Windows event log, and get Event 350, PrintService - Document failed to print and was deleted because of corruption in the spooled file. The associated driver is: . Try printing the document again.
There is no additional info on this event listed in the Microsoft TechNet Events and Errors Message Reporting Center
When this happens, all of the lights on the printer flash very rapidly.
To correct, I clear the queue through Explorer, Troubleshoot, and unplug printer to reset.
Any suggestions appreciated.
Thanks

FYI, I got this to work by treating my printer as a wired printer, even though it allegedly has wireless functionality. Luckily, my ohter devices can print to it wirelessly. At least I don't need to replace my printer just yet...

HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page.

HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page. I continually get a message that the computer cannot communicate with the printer.   Not only will it not print docs, it will not print web pages using IE 11 or Google Chrome.
I've used Print and Scan Doctor, it always reports there are no issues and prints a test page even though I can't print anything else.
Each time I want to print, I must reboot the computer. After reboot I have one chance to print.   This problem started February 15, 2015.
My operating system is Windows 8.1.   I have unintalled the HP software, rebooted, then reinstalled the software:
OJ8500_A910_1315-1.exe
HP Print and Scan Doctor - HPPSdr.exe
HPSupportSolutionsFramework-11.51.0049.msi
All versions were last downloaded on April 4, 2015.
I have a home wireless network (Ubee DDW366 router). All other devices in the house will print to the 8500A printer without issues: 2 Toshiba laptops, 2 Android phones, and 1FireHD.
The desk top is installed with a Netgear Network card I don't know the model, but I had it tested by a PC Tech to confirm that the card is working.   The card and Windows 8.1 were installed on January 3, 2015.
I have run virus scans and malware scans. Each time they show there are no issues with my desktop. What kind of desktop? Specifically made to my specs from store parts. . . no brand name computer. ASUS Motherboard P6X580 Premium. Now I will probably get hacked!
I am at my wits end. And it is frustrating when I need to make a print of something and the system locks up. I often resort to screen printing to a word document to save in order to reboot. . . .but then I lose all sorts of capabilites when I salvage what I needed. Also this is a time consumer.
This printer has served us well for two years and I have expensive cartridges waiting; another two rounds of refills.
Help?
Addendum: I can scan using HP Printer Assistance. I open the HP Printer assistant, it "retrieves" info from the printer, then I select "scan a document or photo" and the printer responds.   I have no trouble with scanning.
This question was solved.
View Solution.

Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP OfficeJet Pro 8600 Plus will print wirelessly but not scan

I have a HP OfficeJet Pro 8600 Plus all in one printer/copier/scanner. It's worked fine for the several months I have had it. But now suddently the computer does not recognize the scanner. I am connected to the device wirelessly and can print but not scan. I haven't been able to figure out why the comptuer recognizes the printer but not the scanner. I uninstalled and reinstalled the device but still no success.
Any ideas how I can get the computer to recognize the scanner? I am running Windows 8. Have not updated to 8.1.

Hello Sarah1234, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scanning issues. I would like to help.
I would recommend powering off your printer and computer. Once they are both down, I would recommend unplugging the power from your wireless router for 60 seconds, and then plugging it back in. Once it has begun broadcasting again, power on your printer and computer.
I would also recommend downloading and running the HP Print and Scan Doctor. Once you have launched the tool, select the 'fix scanning' option.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Officejet Pro 8600 Plus will not print from my MacAir

Similar Messages

Maybe you are looking for