HP Officejet Pro 8600 Plus will not print the attached file in the e-mail

Dear support team,
I have installed the software and setup HP eprint according the manual respectively the advices in HP-Connected however if I send an e-mail to [edited by Moderator] the printer 8600 PRO PLUS will not print the attached file in this case a PDF. But the text inside the e-mail will printed.
Any recommends?
Thank you in Advance.
Best regards
Conny

Hi Conny,
Welcome to the HP Support forums. I understand that the attachment to an email sent to your Officejet Pro 8600 Plus printer’s ePrint email address did not print.
After the PDF didn’t print, did you log into your HP Connected account? I’m curious as to what HP Connected indicated about the print job. I have included the ePrint Job Did Not Print document. It has several causes and solutions as to why the PDF didn’t print.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

HP Officejet Pro 8600 Plus will not print from my MacAir

I have used my MacAir to print on my HP Officejet Pro 8600 Plus for about 5 months without any problems. All of a sudden my printer will not print. The wireless icon says it's connected to the network. But when I click print it says "looking for air printer" and then "printer not connected". I've repeated the Wizard Set Up for the wireless connection. I've turned the printer and computer on and off. I've even tried printing from my iPhone but it will not find the printer anymore. Please help!

Hello @ladybonds ,
Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
You are saying that you have been printing fine from your computer for 5 months and now your printer says it is connected to the network and your computer says that it isn't.
Have you recently upgraded to Yosemite the new Apple OS? If not what OS X are you using?
Are you sure that the printer and your devices are on the same network?
Does the router give your printer an I.P address?
Let me know these answers and we can go from there.
I worked for HP.

Officejet Pro 8600 Plus will not print but is connected and says that the print job is 100% Complete

Hi All,
I'm printing from a MacBook Pro using OSX Lion. It says that Officejet Pro 8600 Plus is connected and that the print jop is
100% complete except that nothing comes out of the printer. I've done all of the test prints and they've printed just fine.
I tired all of the troubleshooting steps listed on the support guide and still nothing. HELP!

Not a reply but another plea for help.
There seem to be so many people with wireless problems that a) it seems silly to start a new thread and b) which one to enter my own plea.
-Printer bought about 2~3 weeks into Sept 2012
-Installed onto Macbook Pro running Lion (full updated at that time)
-Both wireless scanning from printer to computer and initiated from computer worked fine.
-Printer, with full choice of duplex, layout etc, worked fine. (Even left 5star feedback somewhere!)
-Set up eprint. That OK, too. Fine from iPad2 and SE Arc S printing photos.
-Somewhere along the line it stopped communicating with my MBP
-Out of interest, since there seemed to be no problems with an Acer laptop running Vista, I booted the MBP from an external drive on which I'd done a backup of my 10.6 system iMac (>300Km away: can't try that). Installed HP software from disc. Seemed fully functional. Odd. Very odd.
-Restarting with Lion on MBP, tried again. Looks as if it might work, but loses connectivity. Tried manual address on printer.
-Booting from 10.6 system again, reinstalled Lion on MBP (wondering if conflict between HP and Apple updates)
-Reinstalled HP software from disc.
Still didn't work.
-Brought Lion up to date. Downloaded most recent dmg file from HP. Looked for updates. Have applied firmware update to printer
8600 doesn't list my MBP as available computer to scan to
[But all the test pages done whilst in HP Utility, and others, get sent through]
Am getting rather fed-up with all this; never, ever before have I had so much printer problem.
There seem to be a number of Lion users out there with the same problem. So far -but very infrequently tried- other machines/systems seem OK, therefore I am coming to the conclusion that it is an Apple<> HP conflict. If not sorted soon the printer will be returned as it is not fit for purpose. I'll revert to using my seldom problematic, non duplex A3 Brother.
Hrumph
Please help, someone! Either with a pointer to something I've not yet tried or by analysis and rapid availablity of updated software.
Thanks,
Mike W

OfficeJet Pro 8600 Plus will not print

My Macs running 10.10 are not able to print from my printer. I have reestablished wireless connections and have also ensure the latest updates to the printer were downloaded. Nothing has worked. I have also tried to download new drivers but I cannot download them. After clicking download, the page just brings me back to the select language page. Anyone else have this issue or know how to solve it?

Hello,
Jamieson
HP Support Agent
I have a Macbookpro that stopped printing wirelessly to my HP printer. I tried everything I could think of then an Apple rep worked on it for 45min with no luck. I then followed your suggestions. PRESTO!
THANK YOU!
Neal

My Office Print Pro 8600 Plus will not print pdf files sent to it from an iPad using ePrint.

My Office Print Pro 8600 Plus will not print pdf files sent to it from an iPad using ePrint. I just get an error message when I go to the HP Eprint centre. It does print the cover e-mail but nothing else. The attachment is not secure as far as I can see. I have tried sending an attachment from my Mac and that worked fine.
This question was solved.
View Solution.

Hello krnkln3.
Are you trying to send the PDF as an attachment in an e-mail sent to the ePrint e-mail address of the printer or are you trying to print using the ePrint app?
Try sending the same PDF document to the printer's ePrint e-mail address and let us know if that works. If this works but using the ePrint app is not working, maybe the ePrint app is not working fine with this PDF document (it could be due to it's size or something else). Remember that you can always use the e-mail ePrint address of the printer to send PDF documents as the processing is happening at the HP servers and not in your iPad as when you try to send it using the ePrint app.
Cheers!
Wixma.
I am an HP employee.
Say thanks by clicking the Kudos star in the post.
If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

HP Officejet Pro 8600 Plus will not copy even after hard reset

HP Officejet Pro 8600 Plus on Windows 8 OS
Will print from computer; will scan documents & save to computer; will NOT copy document on the unit.
Shut down printer; unplugged from wall and back of unit; held on/off button for 60 seconds; plugged back in; started unit.
Placed document on glass; hit copy; hit black; Unit pulls sheet of paper; unit scans document (squeaks while scanning); after period of time, it spits out paper & reads "copy cancelled", but does not clear or return to home screen.
HELP!!
This question was solved.
View Solution.

Hello,
Please check your private message inbox for the reset I'm going to send you.

OfficeJet Pro 8600 plus will not install , msg Call to DriverPackageInstall returns error 5

I get message "Call to Driver Package Install returned error 5 for package -c\Program Files\HP\HP OfficeJet Pro 8600\Drivers Store\Pipeline\hpup\03.inf-Call to Driver Package Install must be a member of th eadministrator group to install a driver package. Laptop is HP, Core 5, running Win 8.1
No security messages arose during very slow install.
Tried several times, tried to download installation package as suggested btroubleshooter but aborted 4 times (4 hours), other downloads had no problem. Tried changing startup as indicated also, did not correct the problem.

Hi Liam,
The installation CD that came with your 8600 will definitely not work with Windows 8.1 and is not same as the latest online download which you will need to install on Win8.1.
Are you running Win8.1 Pro 32 or 64 bit?
Also make sure you select the right model of your Officejet. There are 3 different models.
HP Officejet Pro 8600 Plus e-All-in-One Printer series - N911
HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g
HP Officejet Pro 8600 e-All-in-One Printer series - N911
HP Officejet Pro 8600 e-All-in-One Printer - N911a
HP Officejet Pro 8600 Premium e-All-in-One Printer series - N911
HP Officejet Pro 8600 Premium e-All-in-One - N911n
Try uninstalling printer from the control panel and reinstall using the Win8.1 download from the link above.
Thanks

Officejet Pro 8600 Plus will not send or receive fax

I have connected the fax machine to the phone outlet, the fax machine dials to another fax machine, the connection sounds like it is being made (the receiving fax machine sends out a noise signalling that it has received a phone call) and then the HP Officejet Pro 8600 Plus says that is is "Connecting" but no fax is sent. Nor can I receive a fax, even though the phone rings on the Officejet Pro 8600 Plus. The error code I get is Error 388 which is that a communication error occurred during fax transmission. However, this message occurs regardless of the fax number that I send to, and I had the recipient check that the receiving fax machine was working fine for transmittals from others.
Is it possible that the proble is that I cannot send or receive faxes through a digital phone line? That seems odd to me given that almost all phone lines in the modern era are digital. How do I send and receive faxes with the Officejet Pro 8600 Plus if the only phone lines available are digital? Also, 4 months ago, I used the same phone line for the same machine, and the fax function worked, but my phone provider assures me that the only phone lines that they have ever provided are digital.
Thank you.

Hello,
I am sorry to hear you are having issues with the fax functionality on your Officejet 8600 plus. I have found a document that has several troubleshooting steps you can try to narrow down the issue. I know some of these steps you have already done, but there might be a few that you haven't, like there is a HP test fax service you can use to test functionality.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02891758&cc=us&dlc=en&lc=en#N226
Good luck!
I work for HP, However, I am speaking for myself and not for HP

HP Officejet Pro 8500A Plus will not print

My 2 month old printer will not print unless I open and close the print cartridge door. The printer screen says it is printing, but nothing happens. I have followed all of the steps on line, but nothing works. Anyone else have this problem?

Does your printer display "Printing..." on the control panel, but never prints?
I had such a problem. The only way I could get mine to print was to unplug the power cord and plug it back in.
I found the problem was an "expired" ink cartridge. I replaced the cartridge with a new one and the problem went away. Check your ink cartridge statuses by using the Control Panel functions. If you see one that is expired (my panel displays a yellow exclamation mark on that cartridge's icon), try replacing it and see if the problem goes away.
My problem occurred whenever the printer went into "standby" mode. I think when it wakes up it checks the cartridges and when the firmware finds an expired cartridge it locks up. Just an educated guess.
Good luck! And if this helps, please click the Kudos button for me.

Officejet Pro 8600 Plus will not maintain "wired" connectivity

Get a message "Unable to communicate with printer". The printer is direct wired to router, but for some reason will loose connectivity. Rebooting cable modem and router seems to fix for a while. Anyone know of a solid fix to this problem?

Hi,
What operating system you use on your computer? which security programs you use on your PC?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page.

HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page. I continually get a message that the computer cannot communicate with the printer.   Not only will it not print docs, it will not print web pages using IE 11 or Google Chrome.
I've used Print and Scan Doctor, it always reports there are no issues and prints a test page even though I can't print anything else.
Each time I want to print, I must reboot the computer. After reboot I have one chance to print.   This problem started February 15, 2015.
My operating system is Windows 8.1.   I have unintalled the HP software, rebooted, then reinstalled the software:
OJ8500_A910_1315-1.exe
HP Print and Scan Doctor - HPPSdr.exe
HPSupportSolutionsFramework-11.51.0049.msi
All versions were last downloaded on April 4, 2015.
I have a home wireless network (Ubee DDW366 router). All other devices in the house will print to the 8500A printer without issues: 2 Toshiba laptops, 2 Android phones, and 1FireHD.
The desk top is installed with a Netgear Network card I don't know the model, but I had it tested by a PC Tech to confirm that the card is working.   The card and Windows 8.1 were installed on January 3, 2015.
I have run virus scans and malware scans. Each time they show there are no issues with my desktop. What kind of desktop? Specifically made to my specs from store parts. . . no brand name computer. ASUS Motherboard P6X580 Premium. Now I will probably get hacked!
I am at my wits end. And it is frustrating when I need to make a print of something and the system locks up. I often resort to screen printing to a word document to save in order to reboot. . . .but then I lose all sorts of capabilites when I salvage what I needed. Also this is a time consumer.
This printer has served us well for two years and I have expensive cartridges waiting; another two rounds of refills.
Help?
Addendum: I can scan using HP Printer Assistance. I open the HP Printer assistant, it "retrieves" info from the printer, then I select "scan a document or photo" and the printer responds.   I have no trouble with scanning.
This question was solved.
View Solution.

Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP OfficeJet Pro 8600 Plus will print wirelessly but not scan

I have a HP OfficeJet Pro 8600 Plus all in one printer/copier/scanner. It's worked fine for the several months I have had it. But now suddently the computer does not recognize the scanner. I am connected to the device wirelessly and can print but not scan. I haven't been able to figure out why the comptuer recognizes the printer but not the scanner. I uninstalled and reinstalled the device but still no success.
Any ideas how I can get the computer to recognize the scanner? I am running Windows 8. Have not updated to 8.1.

Hello Sarah1234, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scanning issues. I would like to help.
I would recommend powering off your printer and computer. Once they are both down, I would recommend unplugging the power from your wireless router for 60 seconds, and then plugging it back in. Once it has begun broadcasting again, power on your printer and computer.
I would also recommend downloading and running the HP Print and Scan Doctor. Once you have launched the tool, select the 'fix scanning' option.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Officejet Pro 8600 Plus won't print or scan wirelessly using Mac OS 10.

Mac OS 10.9
Wireless
My printer was working fine until today. Then when I used the control panel to scan a page I went through the steps and got to scanning and got the message I needed to enable "Scan to Computer" in the HP Utility. I went there and it was unchecked. Seems I had this problem every time I did a new scan job in the past. It wouldn't retain than check. So I checked it and after awhile I got the message "Communication Error" and to check my connections and if that didn't work restart my computer and printer. I did that and also restarted the router but it didn't help.
Then I tried printing from Word, which has always worked but it didn't this time. The printer icon on the right of the dock came up, bounced a few times then disappeared with nothing happening on the printer.
So I deleted and reinstalled the printer. No help. I downloaded and installed HP software and firmware updates. No help. I went through wireless setup. No help
BTW, all along I got good "Wireless Network Test" results. I says it's connected but nothing happens when I try any functions of the printer.
If I can find a USB cable I will try to see if wired works.
Any suggestions would be appreciated.

Hey @neoflyer,
I would like to assist you today with resolving the wireless printing and scanning issues you're experiencing on your HP Officejet Pro 8600 Plus e-All-in-One Printer on your Mac OS X 10.9 Operating System. You mentioned that you have powercycled the devices, reran the wireless setup, and uninstalled and reinstalled the software and drivers to no avail. I'm going to suggest a few additional troubleshooting steps to verify if this is a computer issue or a network issue.
Step 1: Gather the IP and Open the EWS:
1. On the screen of your printer select the wireless button:
2. Under the Wireless information you should see your IP address
3. Open up your internet browser on your Mac computer and in the website address bar just type in your IP address. Please do not include www.
4. After you enter your IP address in the website bar go to that website
5. If the website for your printer opens than that proves with 100% certainty that your printer and computer are 'talking' to each other on your wireless network. If the website fails to open than you have a network communication issue with your router.
If the website fails to open please powercycle your network again:
How to Properly Powercycle a Network:
First, unplug the power cable to your Router
Once your Router is unplugged, turn off your printer
Next, shut down your computer
After 30 seconds to 1 minutes, plug your Router back in
Next, turn on your printer
Turn on the computer
After a few moments check on your computer and ensure that the internet is working. Once it is, hit the wireless button again on the printer to see if your printer got a new IP address. Using the IP address enter it in the address bar of your internet browser and now see if the website for the printer opens.
If the website for the printer opens successfully please follow the steps below:
Step 1: Uninstall Drivers and Software:
From the computer desktop, double-click the Macintosh HD, and then click Applications.
Click the Hewlett-Packard folder.
Double-click the HP Uninstaller, and then click Continue.
Select the product to uninstall, and then click Uninstall.
When prompted, type the Administrator name and Password, and then click OK.
From the Macintosh HD menu, click Users.
Click the correct user name.
Click Library.
Click Preferences.
Click and hold the cursor on the first file that starts with "HP," and then drag the file to the Trash icon on the taskbar. Complete this step for each file that starts with "HP."
Close out of Preferences.
Click the Trash icon on the taskbar, click the Empty button, and then click OK to empty the trash.
Step 2: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 3: Check for Apple Updates:
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 4: Reinstall your Software and Drivers:
1. Please click the following link to download the appropriate Mac OS X 10.9 drivers for your printer: Mac: HP Officejet Pro 8600 series Full Feature Software and Drivers
2. Once downloaded, run through the step by step screens to reinstall your network printer
3. Once the printer is reinstalled, attempt a print and a scan!
Please let me know if these steps resolved your issue. Thanks for reaching out to the HP Support Forums. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HP Officejet Pro 8600 Plus no longer printing wirelessly

My HP Officejet Pro 8600 Plus has printed wireless for both my MacBook Pro and iPad for over a year. As of this morning, it no longer will. The Wireless Network Test Results notice says "your hp printer is unable to connect to your wireless router. MAC address filtering may be enabled on your wireless router which can prevent your HP printer from connecting to your wireless network during setup. Solution: if MAC address filtering is enabled and you would like to keep it enabled, you must add the MAC address of your printer (available in this Test Report) to the list of permitted devices for your wireless router before continuing"
My "router" is an Apple Time Capsule. All this is "greek" to me. I have been trying to resolve this for 5 hours now and have made no headway as I really do not know what I'm doing. Do you have any tips (step by step) as to how to get this working again?
Thanks so much!

Well searching the web I find the support page for your printer here.
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lc=en&product=4323648
Getting started, drivers, manuals are all here the get it connected.
Let’s try here. Wireless Printing Help
http://www.hp.com/global/us/en/wireless/index.html?jumpid=ex_r11400_go_wirelessprinting
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

MY HPOfficejet Pro 8600 plus does not print out any e mails. I have added the printer in e-print

I have an 8600 and it will nor print any emails. Either from outlook, Gmail or AOL. I have tried to used it wirelessly or with the usb connection to no avail. It stopped working about 2 weeks ago. It goes to the print preview screen and cycles. I have re installed the software and update the printer. The printer works otherwise. Please help.

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are having some issues with printing emails to your Officejet Pro 8600 Plus and I can help you with that, however I'm going to need to know what operating system you have first. If you are not sure what your operating system is you can click here to find it. Once I know what I'm dealing with I'll be better able to help you.

HP Officejet Pro 8600 Plus will not print the attached file in the e-mail

Similar Messages

Maybe you are looking for