HP Officejet Pro 8610 Add Printer issue on Mac

I purchased the HP Officejet Pro 8610 and cannot get it successfully set up on my MacBook Pro (operating OS X 10.7.5). During the "Add Printer" phase, I receive the following error message: "The software for this printer is currently unavailable. Please contact the printer's manufacturer for the latest software".
I've downloaded and completed the steps up to this point by using the link from install CD (HP-Officejet-Pro-8610_v12.32.0.dmg) and by downloading after unsuccessfully troubleshooting from the HP webite (HP-Officejet-Pro_8610_12.32.0-2.dmg).
Can you please assist in determing what my next step should be?

Hi,
First reboot your Mac, then click the Apple icon and select Software Update.
From the listed app store click the Store menu and then on Repload Page.
Be sure to install any listed HP or Apple update.
Once you are done, open Print & Scan and try adding the printer again.
May you see any difference?
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

HP Officejet Pro 8610 Terminal Printing

Hi i have installed Hp Officejet Pro 8610 on the machine 1 (32bit arch) and want to remote desktop connect to another machine 2(also 32bit arch) , I remote desktop with both local resources enabling all local devices and resources. When im remoted in to machine 2 i can see the terminal printer renamed with hp officejet pro 8610 redirected but when i print the print doesnt seem to come through.
I Have installed the printer on both machines, they both running same OP which is 7
It Prints fine when connected to machine 1 but failes to print on redirected printer on machine 2 when remoted in.
Pls can anyone help me tx
Regards
AndrewR

Hi @PEDDLAR , and welcome to the HP Forums!
I see you are experiencing problems printing. I would like to assist!
I'd recommend starting with a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Officejet Pro 8500A Plus printing issues

I have been having two new issues suddenly (within the past 2 weeks) with my HP Officejet Pro 8500A Plus. I am trying to print from my iMac 27 inch running OS.X 10.8.4 Both the mac and the printer are connected to a wireless network via an Xfinity Wireless Gateway. I have just replaced the ink cartridges in the printer but am unable to print black & white. In fact everything is comming out kinda pink. I have posted on HP's support site and was told to
Download and install this: http://support.apple.com/kb/DL907
Restart your Mac.
Reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and then next to the "Use" pulldown, select the printer model (not AirPrint). Wait until the "Add" button becomes available. Click it.
Having done that initially my problem was solved. But now I'm having the problem again. I went through the above steps again, but still not able to print. Are there any suggestions for a fix. Is anyone else seen this issue? Is there a particular printer manufacturer that works well with Apple. Because at this point I have a large paperweight that is of no use to me!

The fact that it was solved and then came back points to some (unknown) issue with your Mac's software.
Try these generic fixes first (and then do the reset printing system and re-add again):
http://support.apple.com/kb/ts1417
(one of the three methods - I like Disk Utility best - you can also repair disk permissions while there.)

OfficeJet Pro L7590 - wireless printer issue

Hi,
I have a 2008 OfficeJet Pro L7590 printer. I'm just now trying to get my printer to print wirelessly and I'm having multiple issues. I lost the disk for installation, but downloaded the installation via hp.com/support
After installing it, I tried to connect it wireslessly. On the final step, it says "
Unable to communicate with your printer. Not all diagnostic tests could be performed. Check cable connections and then retry."
I've checked all my cords and everything and they are plugged in correctly! BUT here's the thing. When I go to my start menu, and click control pannel → network and then click on a tab, such as "Network and Sharing Center, Connect to a Netowk, or set up a connection or nework. The window absolutely freezes and I'm not able to click on it at all. Also, I don't see a wireless conection icon on the bottom bar, right corner. (not sure what that's called) All i see are two computer screens and a red X ontop of them (icon)
I really need to connect my printer wirelessly, so I can use my phone, ipads and ipod touches! Please help. I've spent so many hours trying to figure this out!
HP doesn't offer me anymore help because it's out of warrenty

Hello iAliciaa.
I understand you are trying to installing your Officejet L7590 and you are receiving a message indicating "unable to communicate
with your printer". Are you connecting this printer Ethernet or wireless?
Please follow this entire HP document if you are connecting your printer using an Ethernet connection: Printer Is Not Found During Installation.
I understand completely what you are talking about, but could you verify what type of Operating System you have?
Click on this website to find out: Windows.
Look forward to hear from you.
Ashley
I worked on behalf of HP.

OfficeJet Pro 8610 Not printing certain documents

My 8610 OfficeJet Pro is set up ALMOST perfectly. It prints almost all documents including email, word, website info, etc. HOWEVER, it will not print certain .pdf files and Word documents with Drawing Tools using within them. I have run every test & shows successul setup of wireless printer. I also did the HP Print & Scan troubleshoot in which the program found any problems & Fixed them. I did not hook up the Fax part of this system. Otherwise, all parts are working fine. However, in trying to get it to work I have disabled my Print from phone as well. It was working prior to trying to print a document with Drawing Tools & changing settings on the printer to try & get it to work. It is showing me it is connected but my phone is not recoginzing the printer. When I try & Print the document with the Drawing Tool within it, it sends it to the printer, and printer shows "Printing Report", But nothing happens.

My 8610 OfficeJet Pro is set up ALMOST perfectly. It prints almost all documents including email, word, website info, etc. HOWEVER, it will not print certain .pdf files and Word documents with Drawing Tools using within them. I have run every test & shows successul setup of wireless printer. I also did the HP Print & Scan troubleshoot in which the program found any problems & Fixed them. I did not hook up the Fax part of this system. Otherwise, all parts are working fine. However, in trying to get it to work I have disabled my Print from phone as well. It was working prior to trying to print a document with Drawing Tools & changing settings on the printer to try & get it to work. It is showing me it is connected but my phone is not recoginzing the printer. When I try & Print the document with the Drawing Tool within it, it sends it to the printer, and printer shows "Printing Report", But nothing happens.

Officejet Pro 8600 wireless print option with Mac OSX Snow Leopard?

Hi My 'old' 8600 printer died and I purchased a new one. I did not set up wireless communication with the old printer but am interested in doing so with this new one, or at least having that option.
I'm running Mac OS X 10.6.8 Snow Leopard. The installation CD that came with the new printer says it's for OS X v10.6, Lion or Mountain Lion. Is it compatible with my system?
Thanks!

Hello KelliMK, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are looking into compatibility information. The Officejet Pro 8600 is compatible with Mac OS X 10.6. The software disc should allow the full install without issue.
As for the wireless setup, I would recommend following this document on HP Officejet Pro 8600 All-in-One Printer Series - Installing the Printer Software on a Wireless or W...
Please let me know if you have any questions. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP OfficeJet Pro 8610 Always Prints in Landscape (OSX)

My HP 8610 runs on a Mac OSX and I cannot figure out how to get it to print in a portrait format. It ALWAYS prints in landscape. I've looked through every setting, etc., has to be something easy. I tend to use the Firefox browser when printing.
Thanks!

Hello FloralChutney,
Welcome to the HP Forums.
To change the lay out or the pint job, please refer to the screen shot that I have provided.
If you have any other questions, please feel free to write me back at any time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP Officejet Pro 8610 saying "printer not connected" after trying everything I can think of...

The printer worked before. It's working when we print from other devices. I tried updating my OS, no luck. I tried canceling the jobs and restarting, no luck. Tried restarting the computer, no luck. Tried deleting the printer from my computer and now adding it back and that's not working either. The printer deleted and now the computer can't find it again. Can someone please help? This is deeply frustrating.

Hello @ElizabethPaul , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing connectivity issues. I would like to help!
I would recommend performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I'd also suggest this document on Wireless printing center Troubleshooting Issues.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Officejet Pro 8600 Plus printing issues with Mavericks 10.9

The printer stopped printing (the print queue said printer not connected), so I unplugged the printer (an HP suggestion) for 15 seconds, replugged and it printed the doc in the queue. Printed a few docs for about 5 minutes, then the same not connected message as before.
Repeated steps, repeated results. Tried 3 times and can't figure it out. At least I can print when necessary, but unplugging every time is annoying.
Any suggestions?

Hi,
Try unplugging your router for a moment, allow it 2-3 minutes to restart and reboot your printer, then check for any difference.
If the same persists, have it worked with the same router in the past? may you changed any network settings, replaced a router or may upgraded its firmware lately?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Officejet pro 8610 wont print via email

hi
my printer used to work fine. but now when we send an email we recieve confirmation email. but the printer dont print any thing. when i press the lower left corner icon on the panel it says the printer could not connect to the internet
if your network does not use a proxy server , try turning the printer off and then on again. if your network uses a proxy server touch set proxy. and then try again. if you are still unable to connect contact your internet service provider or your administrator

Hi,Try rebooting the devices. First reboot yoru router by unplugiging its power for a moment, then plug it back and allow it 3 minutes to start. Next power off the printer and turn it on again, may you see any difference now?

HP Officejet Pro 8610 - Extremely slow printing

Hello,
I have just purchased my new HP 8610 All in one printer. I have set everything up wirelessly. For some reason when I print documents it is extremely slow printing. I cant seem to find the problem for this. For a 5 page documents it could take minutes to print. Please help, thanks in advance

Hi nat1985,
Welcome to the HP Forums!
I understand that your HP Officejet pro 8610 is printing PDF files very slow, and I am happy to help you with this slow printing issue!
For further assistance, I will need to know the following information:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, Ethernet, or USB.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
If the printer prints slow from Notepad.
Hope to hear from you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Hp officejet pro 8610 prints solid black on scanned pdf and word doc pictures

-HP Officejet Pro 8610
-problem printing scanned pdf document and word doc. photos
-My new HP Officejet Pro 8610 printed a newly scanned pdf document as an all black picture. I then printed a saved word documtent from my iMac which included a small picture. The document print was acceptable, but the picture was solid black. There were no error messages. These were, my initial tests, to check this new printer.

Hey there @TM-10
Welcome to the Community
I read through your post about your new Officejet 8610 scanning a document to your computer and printing out all black. I have a couple ideas for you to try.
Try the steps in this guide: Unexpected Scan Output Using HP Scan Application for HP Multifunction Printers When Using OS X v10.9...
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Officejet Pro 8610 - Can't connect to wireless network (and has similar issue with previous printer)

When I returned from a trip, I was unable to connect to my trusty HP All-in-one 7510 that I had on my network for three years. I tried troubleshooting it, reinstalling the software on numerous computers, and fixing the printer, but alas the printer said that it was connected to the network, and none of my computers wanted to find it anymore.
Then I bought my new Officejet Pro 8610 this week, set it up...and I am experiencing the same issue. I tried using the link and support took from this post - http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officejet-Pro-8610-Can-t-connect-to-wi... but the printer was unable to be found on the network.
I would appreciate any help on this issue. Thanks!

Hello @Celestialnova ,
Welcome to the HP forums.
I understand that you are having problems with your wireless network.
I would like to help.
Since the same issue happened with two different model of printers, lets take a moment to check the network.
Run through the following document.
Printer Does Not Maintain Wireless Connection
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

No print from Windows 7 Desktop and Officejet Pro 8610

I purchased and installed a new Officejet Pro 8610 about a month ago. My desktop computer is an HP Windows 7 unit. The printer is setup wireless. Up until a few days ago, everything has run fine, but now I cannot print anything from my desktop computer. Printing from my MacBook laptop works fine. Printing from my iphone is fine. Scanning to the desktop computer is fine. Webprinting is fine. The printer icon has a nice green checkmark in the devices folder. I have run the HP Print and Scan Doctor, which claims to fix a port issue, but does not resolve the problem. I have use windows to troubleshoot the connection, which claims to make the printer available to my homegroup, but it does not resolve the problem. I tried changing the security settings for the spooler. Did not resolve the problem. I cannot manually stop and star the spooler via dos prompt. Says system 5 error, access denied. This is maddening. I got rid of my old printer (which reliably printed from the desktop) so that I could have wireless printing capability, and now I have wireless capability but cannot print from my desktop. Aaaaggghhhhhh!!!!

Hey , Thanks for getting back to me regarding this issue. At this time I am going to have you load an alternate Officejet driver on your product. Because the network connection is fine, and scanning is still fine I do not believe that the issue that you're experiencing is connectivity or software related. This alternate driver I am going to have you load will operate the exact same way as the Officejet Pro 8610 e-All-in-One Printer driver. Therefore, you will not lose any functionality by performing this fix. Please try the steps below. Step 1: Clear Temp Files: Click on your Start menu
In the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboard
When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.
Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.
Close the Temp folder once it is emptied
Right click the Recycling Bin on your desktop and select Empty Recycling BinPlease proceed to the next step.
Step 2: Load Alternate Driver: Please click here to download the Officejet driver Once the download is complete you may get a prompt to Run the download. If you see the Run prompt, please allow it to Run.An extraction should now occur. Once the extraction is complete an installation window may pop open. Please close any install windows. You do not want to run an installation. Next, click on your Start menu. In the 'search programs and files' box type %temp% and hit enter on your keyboardWhen the Temp folder opens locate the 7z folder. Click on this folder to open it. It should include files that say OJ860At the top of this folder you will see a file path bar. It may show something like 'Computer- Local Disk C - Users - AppData - Local - Temp - 7z . . . ' Left click on the right hand side of this file path bar at the top. The file path should now highlight.Right click on the highlighted file path and select CopyClose the Temp folderClick on your Start menuSelect Devices and PrintersRight click on you HP Officejet 8610 Left click on Printer PropertiesLeft click on the Advanced tabLeft click on New DriverWhen the New Driver window opens please hit 'Next' until you see a list of Manufacturers and Printers Click on the 'Have Disk' button on the bottom rightWhen the 'Install from Disk' window opens, simply right click on the file path bar and 'Paste' in the file path we previously copied.Click OKWhen prompted choose the HP Officejet 8600 Printer and click 'Next' until the Add Driver window closesUnder Printer Properties select Apply, but don't hit OKSelect the General tabRename your printer back to HP Officejet Pro 8610 Hit OK Now that the alternate Officejet driver has been loaded, please test printing to confirm if the printing issue has been resolved. Please let me know if the steps I've provided resolve your printing issue. Good luck!

HP Officejet Pro 8610 - Unable to print windows 8.1

Hi ,
I've recently purchased HP Officejet Pro 8610 and unable to print from windows.
I am running 64bit Windows 8.1
I can print from Web via email
I can print using the HP AiO Remote app in windows. This doesnt have full functionality and is also inconvenient if I am working on documents and I want to print.
I have tried the following:
- Uninstalling and reinstalling from CD provided with printer
- Using the HP printer troubleshooter assistant, no success
- Downloading the software direct from HP website
- Updating the firmware using OJP8610_R1416A.exe
-Changing the port to the network port (in this case it is 192.168.0.200, it responds to a ping, also set the printer to have a static ip)
This is the error message that i get when i try to print a test page when i choose printer properties in the control panel
"test page failed to print. would you like to view the printer troubleshooter for assistance"
I have trawlled through other member's issues and i cant seem to find a fix for myself
Please help
Appreciation in advanced

Hi @binhdai & @JFB2014
I would like to help you both the best I can, and I appreciate the troubleshooting efforts you have both made up to this point. Please try the steps below and let me know the outcome;
1. Uninstall the software - Uninstalling the Printer Software Instructions.
2. Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box.
3. Type in "spool" and press Enter or select OK.
4. Select and open the Drivers folder, select the x64 folder if you have a 64-bit Operating System or the w32 x 86 if you have a 32-bit Operating System.
5. Open the 3 folder, locate the HPBXPSRENDER.DLL file and rename it into HPBXPSRENDER.OLD
6. Reinstall the printer; HP Officejet Pro 8610 e-All-in-One Printer series Full Feature Software and Drivers
Fingers crossed
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP Officejet Pro 8610 Add Printer issue on Mac

Similar Messages

Maybe you are looking for