Hp officejet pro 8610 - Unable to connect to server

Hello. I bought a printer hp officejet pro 8610. I have a home worth router Zyxel Keenetik. My laptop and smartphone access to the Internet via a router (to access the Internet proxy server is not required). I set up the printer on a wireless connection. Configured to print from a laptop to a local network - this works fine. And now trying to set up ePrint, but faced with the problem - I can not run a web-service on the printer. The message - "Unable to connect to server". I downloaded from HP new version of firmware for the printer and installed it, but the problem remained.

Hi,
Try setting a manual public DNS as following and check if that may help:
Open the Network tab within the printer's web page.
Select IPv4 within the Wireless section.
Select a Manual IP, then click the Suggest an IP button and allow it a few moments.
Once the fields being updated, change the DNS section as following:
Primary DNS: 8.8.8.8
Secondary DNS: 8.8.4.4.
Apply and save the changes, then try enableing Web Services again and check for any difference.
Please let me know if that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Officejet Pro 8610 - Can't connect to wireless network (and has similar issue with previous printer)

    When I returned from a trip, I was unable to connect to my trusty HP All-in-one 7510 that I had on my network for three years.  I tried troubleshooting it, reinstalling the software on numerous computers, and fixing the printer, but alas the printer said that it was connected to the network, and none of my computers wanted to find it anymore. 
         Then I bought my new Officejet Pro 8610 this week, set it up...and I am experiencing the same issue.  I tried using the link and support took from this post - http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officejet-Pro-8610-Can-t-connect-to-wi... but the printer was unable to be found on the network.  
      I would appreciate any help on this issue.  Thanks!

    Hello @Celestialnova ,
    Welcome to the HP forums.
    I understand that you are having problems with your wireless network.
    I would like to help.
    Since the same issue happened with two different model of printers, lets take a moment to check the network.
    Run through the following document.
    Printer Does Not Maintain Wireless Connection
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • HP Officejet Pro 8610 - Unable to print windows 8.1

    Hi ,
    I've recently purchased HP Officejet Pro 8610 and unable to print from windows.
    I am running 64bit Windows 8.1
    I can print from Web via email
    I can print using the HP AiO Remote app in windows. This doesnt have full functionality and is also inconvenient if I am working on documents and I want to print.
    I have tried the following:
    - Uninstalling and reinstalling from CD provided with printer
    - Using the HP printer troubleshooter assistant, no success
    - Downloading the software direct from HP website
    - Updating the firmware using OJP8610_R1416A.exe
    -Changing the port to the network port (in this case it is 192.168.0.200, it responds to a ping, also set the printer to have a static ip)
    This is the error message that i get when i try to print a test page when i choose printer properties in the control panel
    "test page failed to print. would you like to view the printer troubleshooter for assistance"
    I have trawlled through other member's issues and i cant seem to find a fix for myself
    Please help
    Appreciation in advanced

    Hi @binhdai  & @JFB2014 
    I would like to help you both the best I can, and I appreciate the troubleshooting efforts you have both made up to this point. Please try the steps below and let me know the outcome;
    1. Uninstall the software - Uninstalling the Printer Software Instructions.
    2. Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box.
    3. Type in "spool" and press Enter or select OK.
    4. Select and open the Drivers folder, select the x64 folder if you have a 64-bit Operating System or the w32 x 86 if you have a 32-bit Operating System.
    5. Open the 3 folder, locate the HPBXPSRENDER.DLL file and rename it into HPBXPSRENDER.OLD
    6. Reinstall the printer; HP Officejet Pro 8610 e-All-in-One Printer series Full Feature Software and Drivers
    Fingers crossed
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Hp officejet pro 8610 wireless not connecting to my laptop

    I have connected my HP Officejet Pro 8610 to my wireless network to my laptop But when I go to  install drivers wirelessly, I get connection failed. 1. download: HP Officejet Pro 8610 e-All-in-One Printer series Full Feature Software and Drivers2. use Use HP Download and Install Assistant (Recommended)3. click install from download assistant4. Extracts5. turn on printer6. Get pop up window with 3 sequences 1. prepare... sucessful 2. connnect (wirelessly) click continue7. Printer Setup & software: click convert to USB connected printer to wireless8. Network setup: identifies my wireless network9. select yes for "So you want to continue to use your printer on this wireless network?"10. Unsuccessful network Instalation. Disabled fwwent through router configures enabling channel 11.Still failsRan hpscan dr. goes through it's steps, goes to d/l install. click install says extracting, finishes (but doesn't say anything and goes away).And nothing happens. So basically went through the HP troubleshooting and they don't work. Please helpThanks, Frustrated... PS please move this to the appropriate forum, thanks 

    ,
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details).
    If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
    Thank you for visiting the HP Support Forum.

  • HP officeJet Pro 8610 can't connect to wireless router

    Just bought a HP officejet Pro 8610, switched on the wireless mode. It won't connect to my Netgear router D6200. It tries to look for the networks in the house and the software hangs. I took it back to the shop and exchanged it with a new printer. I tested it in the shop and it picked up the networks but at home it continues to do the same thing, the software just freezes.

    Hi,
    Try following these steps and check if that may help:
    http://support.hp.com/us-en/document/c03806987/
    I would also suggest disabling any anti virus or firewall software on your PC which might block the installation.
    Be sure to use the latest drivers, those can be downloaded below:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=bi-124093-4&cc=us&dlc=en&lc=en​...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Officejet Pro 8610 does not connect to laptop via wireless network

    I have a new HP Officejet Pro 8610. It is connected wirelessly to my home network. My laptop, running Windows 7, is connected to the same network, but cannot find the printer. I have tried turning everything off and resetting the router, but still have the same issue - my laptop cannot find the printer. 
    I am able to email a document from my laptop to the printer using the printer's email address. 
    What can I do to get my laptop to find the printer on the wireless network? 

    Hey!
    This is an issue with your wireless, you either have to get your router looked at you are looking at relocating your printer and your router so they are closer together. If you are able to connect all of your devices to the network fine when you are in the same room; Call HP Technical Phone Support.
    If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
    I hope this helps.
    I worked for HP.

  • Officejet Pro 8500A unable to connect wirelessly to Ubee Modem/Router

    I recently upgraded to a new "all in one" Ubee Modem Router (Model DDW366) and have spent hours attempting to wirelessly (both using Wizard and entering info by hand) print, but nothing has worked.  The only way I am able to print at this time is by printer cable connected to my MacBook Pro.  I'm unable to print wirelessly from my MacBook Pro, iPhone and iPad.  
    HP will not advise me on how to solve this problem as printer is no longer under warranty and Cox Cable who sold me the Modem/Router combo are not willing to assist with this problem.
    Can anyone advise me on how to print wirelessly again?

    Hello @drlogan0, 
    Welcome to the HP forums.
    I understand that you are encountering problems with getting your Officejet pro 8500A onto your new wireless network.
    I would like to help.
    i would try restoring the network defaults. This will help erase any 'old' information that may be stuck in the printers memory. I would like to give you specific steps for this, but I am unsure if you have the 8500A, 8500A wireless, or the 8500A premium.
    Basically the steps are, go into the network menu, and select restore network defaults.
    If you have tried restoring the network defaults already, please review the following troubleshooting documents.
    Setting Up the Printer for a Wired or Wireless Network for the HP Officejet Pro 8500A
    Printer Does Not Maintain Wireless Connection
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • HP officejet Pro 8600 unable to connect to scanner

    HP Office jetPro  8600 NG11a, Windows 7 operating system, connected to network via ethernet connection
    I have only had the printer for a couple of months. Initially had probelms with the network connection which was resolved by manually inserting the IP address outside the DHCP range.
    I now keep getting a mesagesaying the scanner is not available. I try and re-enable it but that doesn't work 
    I have run the scan doctor and followed the instructions but it is unable to resolve the issue.
    I have un-installed and re-installed the drivers and that doesn't work.
    The is now mention of the IP address but as I had all the problems before I am reluctant to interfere withe the IP address as the printer itself is OK.
    Nothing has been changed on my system, I haven't actually used the scanner to date but suddenly notice the error message on my tool bar and then found the scanner wouldn't work.
    I would be grateful for any help.
    Many Thanks 2DX
    2dx
    This question was solved.
    View Solution.

    Hello there @2dx , I hope you're well
    I read your post about the network connection issues you are having with your Officejet 8600. Please see the guide below for the troubleshooting steps I would suggest for you!
    A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning
    Have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Officejet Pro 8600: "unable to connect to my device" after loading full featured

    I read the forums and installed the full featured drivers.  During installation it asks me to connect to my device using USB cable.  I did this, but it doesn't see my device.  I tried a different cable, same issue.  Both the computer and the printer are on ... I printed a test page wirelessly to make sure the printer was responding.  (The wireless printing was working prior to installing the new drivers.)
    I am running windows 8 on HP Envy.
    I am trying to get it to scan wirelessly and loading the drivers was the answer on the forum.  Any suggestions would be appreciated.
    Thanks,
    Vanya

    Hello there, Welcome to the Forums! I hope you enjoy your experience
    I noticed your post about your Officejet 8600 not functioning on your Windows 8 system. I would suggest trying to install the printer by using the HP Printer Install Wizard for Windows for starters.
    If that method does not work, please follow the next guide very carefully.
    'Unable to Find Printer' Error Message Displays on the Computer During a Wireless Network Installati...
    I hope my post was helpful!
    Thank you for posting Have a great day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • OfficeJet Pro 8610 Unable to send or receive faxes. (tried all of the official steps)

    Can't send or receive faxes. Everything else is working just fine.I just get the error "Unable to send or receive faxes" The all-in-one is plugged directly into the wall jack directly. It doesn't share a line with anything. No voicemail. No phone calls. No DSL. Nothing. This is a dedicated fax line for our small business.  I used the search function and found a post which led me HereI've done every applicable troubleshooting solution 3 x now. Nothing works. Not resetting. Not unplugging. Not going through the setup wizard and completely re-setting up the machine. Nothing.  It's software/drivers are also fully up to date. I appreciate any help that I can get as our business is essentially at a stand-still until we can send faxes again. 

    Hey , I understand that you are having some issues with sending and receiving faxes on our Officejet 8610. I can help you with that. As you have found our usual troubleshooting steps and performed them there are only a few other things we can try. Make sure the printer is plugged directly into a wall outlet and not a surge protector.On the printer click on the Fax icon.Click on the gear.Scroll down to and click on Fax Setup.Click on Advanced Setup.Turn Error Correction Off.Set Fax Speed to Medium.Turn the printer off and on again.Try faxing.If you are still unable to fax at this point then we can attempt a factory reset. I will send you a private message regarding how to do that shortly. If you are still unable to fax after that then the printer will need to be replaced. You can contact HP support by clicking on this link. On the next page scroll down and fill out the form. Once completed you will find info on how to contact HP. I hope this helps and I hope you have a great weekend!

  • Officejet Pro 8610 - Can't connect to wireless network

    Tried to setup the new printer from both Windows 8 and Vista os.  Can't retrieve wireless info (even tho the printer will pick it up).  HP used to produce good products.

    Hi @Schilling34 
    I am sorry to hear that this has been a less than satisfactory experience. I would like to help you get the printer working, on the wireless network, with both the Windows 8 and Vista computers. Please use the following document to troubleshoot the issue; 'Unable to Find the Printer' Message Displays on the Computer During a Network Installation.
    Although you may not see this 'unable to find printer' error, the steps in this document will guide you through the necessary steps.
    Please let me know if this resolves the issue, or if you require further assistance. Thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • How to connect HP Officejet Pro 8610 to a Laptop that's not connect to the internet

    Just bought the HP Officejet Pro 8610 all-in-one for the local Historical Society. Neither the laptop nor the printer will be connected to the Internet. The printer will only be used for printing reports, scanning images, etc.
    I have just removed the instruction manual to familiarize myself with the connecting procedure but I notice there are several references that require internet access.
    Is there a work-around that allows me to install/connect the printer without requiring access to the internet?
    Thank you in advance for your help.
    This question was solved.
    View Solution.

    Hi,
    How many computer will be using the printer ? If only one the USB (you may have to buy a cable) is the way to go. You can also use wireless direct to print but this is not reliable:
        http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c00577405
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hp officejet pro 8610 | does not print and cannot connect it wireless

    Just bought the following printer: Officejet Pro 8610. Installed it with the cd. Installation on the printer goes well, connected to network, strong reception. 1) Cannot make a wireless connection from laptop to printer. Followed all the steps, uninstalled and reinstalled with software from hp site 7 hours worth. Router on/off, firewall on/off etc. 2) Installed not wireless but with a usb cable, this can be done however scanner and copier work but no pinting. Testprint also doesn't work, the internal test print does. Scan doctor said that it was a software problem that could not be solved by said doctor and to uninstall and reinstall the software. Freaking sick of doing that as it does not work. Also installed the basic driver to see if this works, same story, no printing. Laptop is from 2007 with windows XP. I really need to print for work and cannot spend another full day troubleshooting this monster. Either wireless or with usb cable, i dont care....... Please help!!! Thank you Mar

    Just bought the following printer: Officejet Pro 8610. Installed it with the cd. Installation on the printer goes well, connected to network, strong reception. 1) Cannot make a wireless connection from laptop to printer. Followed all the steps, uninstalled and reinstalled with software from hp site 7 hours worth. Router on/off, firewall on/off etc. 2) Installed not wireless but with a usb cable, this can be done however scanner and copier work but no pinting. Testprint also doesn't work, the internal test print does. Scan doctor said that it was a software problem that could not be solved by said doctor and to uninstall and reinstall the software. Freaking sick of doing that as it does not work. Also installed the basic driver to see if this works, same story, no printing. Laptop is from 2007 with windows XP. I really need to print for work and cannot spend another full day troubleshooting this monster. Either wireless or with usb cable, i dont care....... Please help!!! Thank you Mar

  • HP Officejet pro 8610 not connected

    I have a new modem and separete Duel Router.    Router is Lynksis EA3500 with 2.4 Ghz and 5 Ghz capabilities.   Just bought a new HP Officejet Pro 8610 which I now have learned will only run on a 2.4 GHz system.   When I connect the printer to the wireless system it shuts down the 5 GHz network.   It kicks off all other devices.   Those devices can join the 2.4 GHz, but can no longer even see the 5.0 GHz network.   Not acceptable.  
    Do I need a different printer or can this be fixed?   I don't understand why the printer won't run on the 2.4 but allow the laptops, desktop and TVs use the 5 GHz.   Ridiculous.   
    I spent 1.5 hours on the phone with Lynksis first and they verified that the router is working perfectly.   Then I spent 2 hours talking to HP in India and they just said sorry we will tell HP to make this printer capable for 5.0 in the future.    
    Not good - ready to return the printer.   Any other option???
    This question was solved.
    View Solution.

    First, I'm glad to hear the problem is solved.  It also points out a significant problem with third had troubleshooting. 
    It also reminds me of a time when I was trying to help a customer over the phone (long before we could remotely login to client computers.)  I spent a hour or so with this customer trying to figure out the answer to her problem.  I eventually jumped in my car and drove over to the customer's office.  In the middle of the screen was a big message that answered the problem.  When I asked the customer why she didn't tell me about the message, she replied that she didn't believe that it was relavant.
    I am surprised that HP even had you change the bandwidth on the router.  The defaults nearly always work fine.  802.11 AC uses a wider bandwith than 802.11 G or N.  The thing is, the bandwith change is all automatic.

  • OfficeJet 8600 Pro Unable to Connect to Server for eprint BUT is connected to nework

    Just set up my 8600 and everything connected great until I tried to connect to enable web services on the printer.  It says it is unable to connect to serve and asks if I want to enter a proxy.  I dont understand why it cannot connect to server if my printer is connect to my network??

    Hello cboucher78,
    Welcome to the HP Support forums.  I gather  that you are getting an error message when you are trying enable the web services for your Officejet Pro 8600 printer.
    The message you are getting is indicating that the printer cannot establish 2-way communication with the HP ePrint servers and needs some assistance.  Please set a manual IP address and manual DNS servers to correct this.  I have included a link to another post I did that has the steps with screen shots.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

Maybe you are looking for