HP Officejet Pro 8610 will not install on Windows 2003 Server 32 bit.

When installing the 8610 with the disk, at the end it states and error occurred during the installation of the device. The specified module could not be found.
When I install using the downloaded drivers, after the files extract and the program connects to the printer, when I hit Continue a screen pops up and states the operating system of this computer is not supported... even though the 2003 Windows server is on the list. Is there anything I can do to install the drivers? All I need is basic printing . I'm about ready to pack it up and return it... which means the other printers will have to be returned because I like them all to be the same.
Please help.

Hi,
Follow the steps below to install the software using an MSIEXEC command, the installation should not be done using the installer as any clieant operating system.
The steps below are also applicable for installing the 8610 on a server OS:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03351547&lc=en&product=5367608&tmp...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

HP Officejet Pro 8630 will not install In Windows 8.1

Error 5: Failed to add port monitor HP Discovery Port
Monitor (HP Officejet Pro 8630)
When I try and install the printer the software hangs up after the first page with this error message and it will NOT go any further.
On my Windows 7 Laptop it went right on without any problems.
I'm about ready to take this one back to the store and DEMAND my money back.

Hello there @FIRSTLIONHEART ,
After doing some research for you, I have found another community member with the same issue who's issue was resolved within this thread.
Please click this link to see their solution and try the steps:
error 193: failed to add monitor HP Discovery Port Monitor (HP Office jet Pro 8600).
If this does not resolve the issue for you, please let me know the results!
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

CS3 will not install on Windows 7, 64-bit. No error message. Just stops installing.

CS3 will not install on Windows 7, 64-bit. No error message. Just stops installing. This is a brand new machine. This is one of the first things I'm installing on it. I'm running Windows 7 Home Premium 64-bit. The disks are fine. I have the programs installed on my two XP machines. When I run the disk, I get the window pop up that says "Initializing Installation for Adobe Creative Suite 3". Then the disk stops spinning and nothing else happens. No error message. Nothing else happens. I'm baffled. I have searched several discussion boards and cannot find anybody that has had a similar install issue like this.

Old_Timer I would recommend reviewing your install logs to determine the exact error message. You can find details on how to locate and interpret the logs at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.

HP OFFICEJET PRO 8500 - Will not install on wintows 8.1- says SYSTEM CANNOT FIND SPECIFIC FILE

My HP Officejet 8500 will not install on windows 8.1. The error message says:
The system will not find the specific file

Hi,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the error no longer appear..
If the issue persists continue follwoing the next steps below:
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Officejet Pro 8610 Will Not Print

I have a new Officejet Pro 8610 which has been working fine but today it would not print. Everyting else still worked, the printer is detected by USB and all of the cleaning/ alignment procedures work from my PC as normal. Scaning a document worked OK as well. I tried to run a test print from the printer list on windows, this didn't work either. So I uninstalled the supplied software and reinstalled it again, still would not print. At this point I installed the software on my old laptop and connected if by USB again and it worked fine, printed straight away. The only difference in the install was when selecting which additional programmes to install, one said it was already installed even though I had unistalled the software before. That programme was the Product Improvement Study which I can't get rid of. Everytime it is still there. Is this causing my problems and how do I get it off my PC as I am unable to find it anywhere to remove it. Any help would be appreciated.

no one answered this questio for me or even gave me advice....
I got it to print from explorer but not chrome .So for some reason it decided to stop printing from chrome all on its on.Not sure how long it ill print from ie but we'll see .thanks for no advice

Officejet Pro 8610: Will not Auto Answer

Evening all. We just purchased two HP Officejet Pro 8610's and have set them up at the office, however, we have noticed that even though we have the Auto Answer feature enabled, neither machine is automatically answering. Instead they are still requiring a manual "yes, go ahead and answer that" button press which does not work for us as we often do not have people around those machines.
In running a Fax Test Report I got the following print-out...
Fax Hardware Test: PASS
Fax Connected to Active Telephone Wall Jack: PASS
Phone Cord Connected to Correct Port on Fax: PASS
Using Correct Type of Phone Cord with Fax: PASS
Dial Tone Detection: PASS
Fax Line Condition Test: PASS
Language: English
Country/Region: USA
Auto Answer: On
Rings to Answer: 2
Fax Paper Size: Letter
Tone or Pulse Dialing: Tone Dialing
Fax Sound Volume: Soft
Distinctive Ring: Single Rings
Busy Redial: Redial
No Answer Redial: No Redial
Automatic Reduction: On
Backup Fax Reception: On
Error Correction Mode: On
Fax Speed: Medium (14400)
Fax Forwarding: Off
Communication Error Redial: Redial
Our header and number have also been set. At this time I am assuming I missed something in the User's Manual, since this is happening with both machines. Might someone know of what I missed?
This question was solved.
View Solution.

Hi RandyT9,
I believe it is related to distintive ring setting. Have you tried to set the Distinctive Ring feature to All Rings and see if the printer can answer it automatically?
If you using distintive ring service, please refer to User manual on the distinctive ring setting.
If you are not using a distinctive ring service, check to make sure that the Distinctive Ring
feature on the printer is set to All Rings.
Hope this may helps.
Regards,
Although I am an HP employee, I am speaking for myself and not for HP.
Let others know this reply was helpful by accepting this solution. You can also show your appreciation by giving kudos.

Will not install in Windows 7 64 bit

Downloaded SafariSetup.exe but it will not install. Clicking on it results in message: "The version of this file is not compatible with the version of Windows you are running." I need Safari to run WebKit. Is there a Safari that will run on my computer? OR is there another browser in which to run WebKit?

Yeah, I think it falls into the same category of problems as "not a valid win32 application", "invalid signature", and "unknown publisher" messages ... usually all of which relate to installers getting damaged on the download.
At any rate, I'm glad you got things working again.

Oracle not installing in WINDOWS 2003 SERVER

I cound not able to install oracle 10g in windows 2003 server. But its working fine in windows xp. I dont know for what reson its not installing. Once autoexec.exe is started, Its showing a black screen with please wait...... But after
10seconds its disappearing . Kindly help me. It says its DEP (DATA EXECUTION PREVENTAION) some thing like that.

It's a Windows "issue", not Oracle :
http://support.microsoft.com/kb/875352
Nicolas.

Tomcat (3.2.8) service will not start in Windows 2003 Server

We just upgraded one of our servers to Windows 2003 Server. I did change the port in server.xml from 8080 to 8060. When I try to start the tomcat service it fails with an error message:
Could not start the Tomcat service on Local Computer.
Error 1067: The process terminated unexpectedly.
I can however start it with the startup.bat file in tomcat_home\bin
Can anyone help.. was running fine under windows 2000 server

Corection Tomcat version is 3.2.4

Printer officejet pro 8600 will not install

I have done everything but start drinking and that might be next!!! I cannot get this printer to work. Every since I download McAfee (which I uninstalled it) it will not work correctly. Now I got this pop up.
This file does not have a program associated with it for performing this action. Please installl a program; if one already installed create association in the default program controls.
How do you do that? And yes I have installed the software a million times.

Hello @glendaguichard ,
Welcome to the HP forums.
I understand you are getting an error message, despite a million software installs.
I would like to help you.
3/4 oz Malibu® coconut rum
3/4 oz white creme de cacao
1/4 oz Frangelico® hazelnut liqueur
1 splash half-and-half
Combine ingredients in a mixing glass. Shake and strain over ice in an old-fashioned glass.
Sorry.
On a more serious note, What is the operating system of the computer?
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Hp officejet 6100 eprinter will not install on windows 7 64bit

I've tried everything. Cannot install software for brand new hp officejet 6100 eprinter. No using disc, not wireless, not usb, not downloading software not troubleshooting in windows nothing what so ever. It's been weeks and weeks, just can not use this printer in anyway on HP Pavilion dv7-3060us Entertainment Notebook PC
Serial Number: [edited by Moderator]
Product Number: VM237UA
Can't attach screen print of error messages here.
install does not finish: A fatal error occurred preventing product use. Click "Cancel" to cancel install.
MSIExec command: /i "C:"\HP_ePrint\Setup\Core\SIPM_64\HpTcpMon65.msi"/qn REBOOT=ReallySuppress
Path: <empty>
Return code: 1603
Troubleshooting HP printer software installation
We are sorry that our printer software encountered an error while installing.
Your printer software did not install successfully. You may have seen an error similar to one of the following:
"Device setup failed to complete"
"Unknown device"
A red X displays after connecting the USB cable
On the following screens, you will find troubleshooting solutions that our support agents have found to be the most helpful to resolve install errors. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved. Also, this troubleshooter includes buttons to make certain steps easier. If a button doesn't work or you would like to do the steps yourself, you can view the manual steps by expanding the hidden text below any button.
To begin troubleshooting, click Begin USB Troubleshooting, below.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software
This solution consists of multiple steps. Make sure you complete each step before continuing to the next one.
Uninstall the HP software
Even if the HP software installation failed, some components might have partially installed on your computer. Follow these steps to remove them.
Disconnect the USB cable from both your printer and computer (if it is currently connected).
Click here to open the list of currently installed programs.
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type control panel in the Search (Windows 8.1) or Search Apps (Windows 8) box.
Click or tap the Control Panel icon.
The Control Panel window opens.
Under Programs, click Uninstall a program.
On the taskbar, click the Windows icon, and then click Control Panel.
The Control Panel window opens.
Under Programs, click Uninstall a program.
On the taskbar, click Start, and then click Control Panel.
The Control Panel window opens.
Double-click Add or Remove Programs.
In the list of installed programs, click your HP printer name, and then click UninstallChange/Remove.
Follow the onscreen instructions to complete the software removal.
Caution
If the uninstaller asks you to remove shared files, click No. Other programs that use these files might not work if you delete the files.
You may be prompted to restart your computer.
Note
After the restart, this troubleshooter will open and return to this page automatically.
Click Next Step below to continue with the next step in the solution.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Run the Microsoft Fix it troubleshooter to reset the registry entries
Sometimes the uninstall does not completely remove the software. Microsoft provides an automated fix for this problem on their web site. Follow these instructions.
Click here to open the Microsoft support solution:
If you like, review the information on the Microsoft web page.
We recommend that you click Run now in the Microsoft Fix it section to fix the problem.
Follow the onscreen instructions in the Microsoft wizard:
On the Are you having a problem installing or uninstalling a program? screen, click Uninstalling.
On the Select the program you want to uninstall screen, scroll through the list of programs and choose the entry for your HP printer series, and then click Next.
When the Microsoft wizard completes, you will be prompted to restart your computer. Click Yes to restart.
Note
After the restart, this troubleshooter should open and return to this page automatically. If it does not open by itself, open it manually after the restart.
Click Next Step below to continue.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Disable startup services
Windows allows many programs and processes to run immediately upon startup. These programs may be preventing you from installing the HP software. These directions explain how to disable these programs and processes temporarily so that you can install the printer software.
Click here to open the System Configuration Utility dialog box. (It may take up to a minute for this to open.)
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type msconfig in the Search Apps box.
Click or tap msconfig.
On the taskbar, click the Windows icon.
Type msconfig in the Search programs and files dialog box, and then press Enter.
On the taskbar, click the Windows icon, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
On the taskbar, click Start, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
Check to see if Normal Startup or Selective Startup is currently selected. If Normal Startup is selected, follow the indicated steps, below. If Selective Startup is selected, follow those steps instead.
Note
Follow the appropriate instructions for your startup type. You only need to follow one set of instructions, not both.
To disable a Normal Startup
To disable a Selective Startup
Select Selective Startup, and then clear the Load Startup Items check box.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
Click Disable All.
Click the Startup tab, click Open Task Manager, and make a list of the items that are selected.
You will need this list to reset your computer startup items later.
Click the General tab, and then clear the Load Startup Items check box.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
Make a list of the items that are selected.
You will need this list to reset your computer startup items later.
Click Disable All.
Click Apply, and then click OKClose.
A new window displays. Click Restart to continue.
Note
After the restart, this troubleshooter will open and return to this page automatically.
Upon restarting your computer, the System Configuration Utility window may display. If it does, select the Don't show this message... check box, and then click OK.
Click Next Step below to continue with the next step in the solution.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Reinstall the HP software
Now that your system is updated, try installing the HP software again.
Turn your printer on.
If you are using a USB connection, disconnect the USB cable from both your printer and computer (if it is currently connected).
Reinstall the software using the CD that came with the printer, or download and install the latest version of the software for your printer from the HP web site (recommended):
Click here to go to the HP Printer Install Wizard download page.
Follow the directions to download and run the HP Printer Install Wizard.
Follow the onscreen instructions to download the printer software for your version of Windows.
The HP Printer Install Wizard downloads and starts the software installation.
Note
A full Windows 8 or Windows 8.1 printer software install may not be available for all products. Click here to find out if a Windows 8 or Windows 8.1 download is available for your printer.
Follow the onscreen instructions, making sure to proceed all the way through the installation without canceling or exiting any screen.
Note
Do not connect the USB cable until you are prompted, or an install error may occur. Also, if your software is still not finding your printer over the USB connection, review the following USB tips.
+ USB tips
Ensure that your USB cable is no more than 5 meters (16.4 feet) in length. (For best results, use a cable that is less than 2 meters (6 feet) in length.)
Try connecting the USB cable to a different USB connector on the computer. (For example, if you plugged the cable into a front USB port, try plugging it into a port in the back.)
If the USB cable is connected to a USB hub or a docking station for a laptop, it could cause the installation to fail. Even if you believe that your USB hub works fine, try connecting the USB cable directly to the computer during the device installation (when prompted). You can always move it back to the USB hub later.
If you need to use a USB hub, use one that is externally powered instead of using a non-powered hub.
When the installation completes, try using your printer.
Turn your printer on.
If you are using a USB connection, disconnect the USB cable from both your printer and computer (if it is currently connected).
Reinstall the software using the CD that came with the printer, or download and install the latest version of the software for your printer from the HP web site (recommended):
Click here to go to the HP Support & Drivers web page.
Select the option to download drivers and software, and then type the name of your printer in the search box.
For example, type HP Photosmart B211.
Follow the prompts and make selections to display the software and drivers for your printer.
When prompted, select the appropriate version of Windows, to view the driver download and CD ordering options.
Tip
If you're not sure whether your operating system is 32-bit or 64-bit, click the Is the Windows version on my computer 32-bit or 64-bit? link on the page for help.
If given a choice, select the full feature software and drivers link.
This option may appear in an area labeled Drivers.
When prompted, click Save, and download the software to your desktop or a folder where you can easily find it.
Start the HP software installation by running the install program that you downloaded.
Follow the onscreen instructions, making sure to proceed all the way through the installation without canceling or exiting any screen.
Note
Some printer models require a USB connection during the install. If you are prompted by the software, connect the USB cable. Do not connect the USB cable until you are prompted, or an install error may occur. Also, if your software is still not finding your printer over the USB connection, review the following tips.
+ USB tips
Ensure that your USB cable is no more than 5 meters (16.4 feet) in length. (For best results, use a cable that is less than 2 meters (6 feet) in length.)
Try connecting the USB cable to a different USB connector on the computer. (For example, if you plugged the cable into a front USB port, try plugging it into a port in the back.)
If the USB cable is connected to a USB hub or a docking station for a laptop, it could cause the installation to fail. Even if you believe that your USB hub works fine, try connecting the USB cable directly to the computer during the device installation (when prompted). You can always move it back to the USB hub later.
If you need to use a USB hub, use one that is externally powered instead of using a non-powered hub.
When the installation completes, try using your printer.
Whether or not you installed the software successfully, make sure you follow the instructions in the next step to enable your startup software, or your computer may not function in the way you expect. Click here or click Next Step below to continue.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Enable startup services
If you disabled startup services earlier, make sure you follow these steps to enable them again or your computer may not function in the way you expect.
Click here to open the System Configuration Utility dialog box. (It may take up to a minute for this to open.)
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type msconfig in the Search Apps box.
Click or tap msconfig.
On the taskbar, click the Windows icon.
Type msconfig in the Search programs and files dialog box, and then press Enter.
On the taskbar, click the Windows icon, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
On the taskbar, click Start, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
If you disabled a Normal Startup, follow the indicated steps, below. If you disabled a Selective Startup, follow those steps instead.
Note
Follow the appropriate instructions for your startup type. You only need to follow one set of instructions, not both.
To enable a Normal Startup
To enable a Selective Startup
Select Normal Startup.
Click the Startup tab, click Open Task Manager, and then selectenable every item from the list you made in a previous step.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
On the Services tab, select every item from the list you made in step A.
Click Apply, and then click OKClose.
A new window displays, prompting you to restart.
Note
After the restart, this troubleshooter should open and return to this page automatically. If it does not open by itself, open it manually after the restart.
Try using your printer again.
If you successfully installed your HP printer, you're done! You can delete this troubleshooter if you'd like.
If the install was not yet successful, click here for further assistance.
Home Begin USB Troubleshooting>
Further Assistance Exit Start Over
Give us feedbackclose
Give us feedback
Select your answer, and then click the button that appears to send us your results.
Did this solution solve your problem?
Yes, it solved my problem No, it did not solve my problem I want to give HP more feedback. Take me to a short online survey to provide additional comments on how to improve this solution.
Exit without giving feedback
close
close
Confirm Exitclose
Exit Troubleshooter?
YesNo
For Further Assistanceclose
For Further Assistance
Visit HP Support Forums and connect with HP users to get insights, tips, and answers to questions about your product. Follow the link below to view the forums.*
Click here to go to the online HP Support Forums.
If you are still unable to install the HP software, please contact HP support.*
Click here to find HP contact information for your country/region.
* Support options and availability vary by product, country/region, and language.
OK

Hi @prdstudio3 ,
Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

ITunes 64 bit will not install on Windows 7 (64-Bit)

I downloaded the 64bit version if iTunes (itunes64setup.exe), and when I went to install it, it went through most of the installation procedure and it stated that I should "download the 64 bit version of the iTunes software" (which as I said before, I already did).
I did the "delete the temp folder" bit, and that did not help. I would like to be able to just update my iPhone from anything other than my Netbook. So what should I do. A nice set of "step by step" instructions would help.
I already searched the "Support" section, and I could not find ANYTHING on the 64 bit version of iTunes. So I followed every instruction on "problems with installing iTunes" that related to the 32 bit just to make sure.
So basically, the "64 bit software" is reading like it is the "32 bit software" and I have downloaded the software and re-downloaded it 3 more times. Same problem each time.

Same problem for me. iTunes 64bits instlls well up to 80% of the process.
then it says that some software components are missing.
I was never able of completing my iTunes installation (on my new computer).
earlier versions are no longer available and the iTunes for 32bits isn't accepted by Windows 7 64 bits.
Can anyone at Apple explain what this is ?
Has anyone experienced the same problem ?

Itunes 10.5.1 will not install on windows 7 64-bit

When ever i go to install iTunes 10.5.1 on my computer i come up with this error message
An error occurred during the installation of assembly 'Microsoft.VC80.CRT.type="win32', version="8.0.50727.4053".publicKeyTocken="1fc8b3b9a 1e 18e3b".processorArchitecture="amd64". Please refer to Help and Support for more information. HRESULT: 0x80070BC9
what do i do?

Same problem for me. iTunes 64bits instlls well up to 80% of the process.
then it says that some software components are missing.
I was never able of completing my iTunes installation (on my new computer).
earlier versions are no longer available and the iTunes for 32bits isn't accepted by Windows 7 64 bits.
Can anyone at Apple explain what this is ?
Has anyone experienced the same problem ?

I tunes will not install on windows 7 64 bit

I have upgrade to window 7 and I am trying to download I tunes. I get a message that My Itunes was not modifying. Errors while attempting the down load. I have no older versions of I tunes installed.
Thans for your help.
Jim

Please post the exact wording of any error messages that are occurring so that others can offer relevant assistance.

ITunes 7.6 will not install on Windows Vista 32-bit (iPod Service problem)

Basically, my story is near-identical to the one here:
http://discussions.apple.com/thread.jspa?threadID=1572880&tstart=0
EXCEPT that after trying EVERYTHING rmurtagh did, I STILL had no success. Specifically, when I try to install iTunes, I get the error "Service 'iPod Service' (iPod Service) failed to start. Verify that you have sufficient privileges to start system services." and when I try to change anything using services.msc, I get the error, "The system cannot find the file specified." PLEASE HELP!!

when I try to change anything using services.msc, I get the error, "The system cannot find the file specified." PLEASE HELP!!
Are you getting that if you try to manually restart the iPod Service in Services.msc?
If so, do you get an error message number with the message? If so, what number is it?

HP Officejet Pro 8610 will not install on Windows 2003 Server 32 bit.

Similar Messages

Maybe you are looking for