Hp officejet pro l7590 with blinking memory card error message

My all-in-one printer constantly blinks the yellow exclamation point and has the message Memory Card Error for no apparent reason. I have not used a memory card. It just decided to show the message and blink. I turned it off and on again, with no change. How do I make it stop?

Experiencing the same problem, so did some troubleshooting of my own. I am using Windows 7; however, the OS should not make a difference since this is the built-in card reader which can be used without a computer being connected. Specifically, I was trying to read an SD card to make a proof sheet.
I knew I had been able to read an older Compact Flash card, so tried that and was successful. Then I tried an older SD card that is only 128MB -- no problem. A closer look at the card causing the "Memory Card Error" message revealed that it is a 4 GB SD HC card. The printer documentation includes Secure Digital in the list of supported memory cards, but not the newer variants.
Clearly, the error message is caused by attempting to read a non-supported memory card.

Similar Messages

Officejet pro 8600 Premium pick motor stalled error message

I have the Officejet Pro 8600 Premium printer. I'm getting the message "pick motor stalled" after two and a half months of stellar use with this printer. There is no paper/print jam. I'm using the same paper I have always used. Help, is this a problem with this model?

Also having this issue with an Officejet Pro 8600 Premium too. Bought it in May 2012 to replace an Officejet 7410. Running on a wireless network to a Win 7 32 bit laptop. Started getting the popular Pick Motor Stalled error after two months of ownership of the 8600. Have been able to get the printer to reset this error in the past with combinations of powering down, running diagnostics, and having the printer execute either a print head clean routine or a print printer status routine - that is up until this weekend. Trying to print tax returns so I can get them in the mail by the 4/15 deadline tomorrow and, of course, the Pick Motor Stalled error shows up again. Spent several hours trying usual tricks, this time nothing works. Finally, as a desperate last resort, I powered down the printer and completely removed the second printer tray assembly from the bottom of the printer. Powered back up running only the single main tray and that did the trick. Printing restored.For those that might conclude there was a paper jam on the machine and removing the second paper tray assembly fixed it, trust me. I have been in and out of that machine. There was no paper jam. There is some glitch in either the electronics or firmware, or both on these printers that is causing all the Pick Motor Stalled errors that the user community for this HP device has been dealing with.

MSI server with Gigabyte Newcord card error message

I purchased one of your servers with your MSI-MS-9129 Server Motherboard. I have been trying to get the onboard e1000 Intel Gigabyte adaptor to work. I have allready down loaded latest driver and complied. When I try to install the module with command:
"/sbin/insmod e1000"
I receive error message:
Using /lib/modules/2.4.18-3/kernel/drivers/net/e1000.o
/lib/modules/2.4.18-3/kernel/drivers/net/e1000.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg

Quote
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
Try "dmesg", or check /var/ directory.

Problems with installing HP OfficeJet Pro L7590 driver All-in-One

Hello HP team.
Having problem with installing driver for HP Officejet pro L7590.
Starting the process the process bar goes to the end 100% and then disappear.
After that nothing happens.
Rebooting doesn't help.
Windows 7-64

Thanks for getting back to me!
Lets try some more steps:
Uninstall, level 3 for HP PC or level 4 for non-HP PC.
1. Click Start and type %temp% in the run field and click OK.
2. Look for, and open the folder starting with 7z (Example: 7zS2356) (if there is more than one 7z folder, try the most recent one)
3. Open folder Util
4. Open folder CCC
5. Run the uninstall_ L4.bat for a non-HP PC or run the Uninstall_L3.bat for a HP PC
6. When the uninstall has completed restart the computer
Try to install again using the HP Printer Install Wizard for Windows
Let me know how this goes please
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My iphoto on my MacBook Pro will not let me import my photos from my canon t3i. It is blurred over both import all, and import selected showing that I cant choose those options. I've tried with the memory card and usb cord. Please help!

My iphoto on my MacBook Pro will not let me import my photos from my canon t3i. It is blurred over both import all, and import selected showing that I cant choose those options. I've tried with the memory card and usb cord. Please help!

What version of iPhoto?
Can you access the images with Image Capture (in your Applications Folder) ?

OfficeJet Pro L7590 - wireless printer issue

Hi,
I have a 2008 OfficeJet Pro L7590 printer. I'm just now trying to get my printer to print wirelessly and I'm having multiple issues. I lost the disk for installation, but downloaded the installation via hp.com/support
After installing it, I tried to connect it wireslessly. On the final step, it says "
Unable to communicate with your printer. Not all diagnostic tests could be performed. Check cable connections and then retry."
I've checked all my cords and everything and they are plugged in correctly! BUT here's the thing. When I go to my start menu, and click control pannel → network and then click on a tab, such as "Network and Sharing Center, Connect to a Netowk, or set up a connection or nework. The window absolutely freezes and I'm not able to click on it at all. Also, I don't see a wireless conection icon on the bottom bar, right corner. (not sure what that's called) All i see are two computer screens and a red X ontop of them (icon)
I really need to connect my printer wirelessly, so I can use my phone, ipads and ipod touches! Please help. I've spent so many hours trying to figure this out!
HP doesn't offer me anymore help because it's out of warrenty

Hello iAliciaa.
I understand you are trying to installing your Officejet L7590 and you are receiving a message indicating "unable to communicate
with your printer". Are you connecting this printer Ethernet or wireless?
Please follow this entire HP document if you are connecting your printer using an Ethernet connection: Printer Is Not Found During Installation.
I understand completely what you are talking about, but could you verify what type of Operating System you have?
Click on this website to find out: Windows.
Look forward to hear from you.
Ashley
I worked on behalf of HP.

HP Officejet Pro L7590 and Mac Yosemite 10.10 printing software

I just upgraded my Mac to a mew 2014 MacBook Pro with Retina and Yosemite 10.10.1.
I want to install my old HP Officejet Pro L7590. I have the printer connected by network cable to my Comcast network hub. There is a stable connection on both ends (lights are on). What software do I download to install the printer? Is it not available for Yosemite yet? Where is it located? I'm assuming its not available for Yosemite yet? I don't have the original software. Thanks.
This question was solved.
View Solution.

Hi @rustyblue,
Welcome to the HP Forums!
Currently there are no full feature software and drivers directly through HP for Mac OS X 10.10 for this particular printer model. However, after some searching I found this driver directly through Apple. HP Printer Drivers v3.0 for OS X.
If you need help with scanning without HP software, please see this post, Re: iMac OS X 10.9.3 Scan to iMac Driver for HP OfficeJet Pro 8500A A910a does not seem to exist, by my colleague @Sunshyn2005. Even though this post is for Mac OS X 10.9.3 and a different printer, these steps will work for your printer on 10.10 as well.
Hope this helps you get up and running, please let me know if you have any further issues!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Unable to install Officejet Pro L7590 print driver in Windows 8.1

I have lost days of time trying to get my OfficeJet Pro L7590 to print properly and otherwise operate in a stable manner. My computer is a new Dell XPS8700 running Windows 8, upgraded to Windows 8.1 via the "Store" app after purchase. My problems started soon after the 8.1 update.
The primary problem symptom is the printing of about a half page of text fine, then the printer spits the page out and prints several more pages of mostly blank paper with random symbols around a top or side edge. This occurs regardless of the program doing the printing, i.e., MS Word, Excel, Acrobat, etc.
I have run the Printing Doctor program many times which doesn't fix anything, despite its claims to the contrary (more below).
I have been on this forum many times and tried multiple instances of uninstall/reinstall without success. The HP Installer may make it through the whole installation process but unstable performance of the printer is the outcome. Uninstalling the printer software using HP's uninstaller ALWAYS crashes before it can finish uninstalling. I get a message of "HP Installer Uninstaller has stopped working". I would attach a screenshot here but I does not seem an option in this window.
I have run multiple versions of HP's scrubber programs which also crash by level 2 with same message. I still ran L4 regardless but that crashes, too. That's the constant of every uninstallation or scrubbing effort using HP's programs: a crash without an error message given beyond the "HP Installer Uninstaller has stopped working".
I run the Printer/Scanner Doctor tool when the software was malfunctioning and it always finds a Print Spooler problem, "fixes" it but the problem remains. This posting is coming after the "Doctor" tool told me to uninstall the program. HP's uninstaller crashed, as usual, but the I was told to use Windows Add/Remove programs to finish the job. I did. I have not tried to install the program again and am becoming close to 'Refreshing' my entire Windows program, which will require reinstalling and updating Windows and every program I use - which will take days. I hope to avoid that step.
Dell's hardware analysis utility tells me everything hardware is great!
I truly believe HP's software IS THE PROBLEM and would love to figure this out. The printer has always worked great - until the Windows 8.1 update. The scanner will work fine (usually) after I reinstall the software. I used the printer before on my prior computer running Windows 7 with no trouble.
Going into today's crash info, via Event Viewer, I have this message from the error log:
Application 'C:\Program Files (x86)\HP\Digital Imaging\bin\hpqbam08.exe' (pid 3960) cannot be restarted - Application SID does not match Conductor SID..
And this error occurred just after:
Faulting application name: svchost.exe, version: 6.3.9600.16384, time stamp: 0x5215dfe3
Faulting module name: combase.dll, version: 6.3.9600.17031, time stamp: 0x53087867
Exception code: 0xc0000005
Fault offset: 0x0000000000005fc4
Faulting process id: 0x1284
Faulting application start time: 0x01cfe34585c8f1c4
Faulting application path: C:\WINDOWS\system32\svchost.exe
Faulting module path: C:\WINDOWS\SYSTEM32\combase.dll
Report Id: a118ba71-4ff5-11e4-bea6-34238711e0a0
Faulting package full name:
Faulting package-relative application ID:
There was an earlier - about 30 minutes earlier - warning saying:
The application (HP Solution Center, from vendor Hewlett-Packard) has the following problem: To function properly, HP Solution Center must be reinstalled after you upgrade Windows.
I have reinstalled it many times. I have used HP's installation & uninstallation utilities, including the Installation failure utility, none of which install the program properly, CERTAINLY not well enough that I can EVER uninstall it without a crashed uninstallation per description above...
I think I have reviewed and tried every "canned" HP quick solution, and not so quick solution, on this forum.
Comments?
Richard_L

Added Info for original posting:
Windows 8.1 64 bit OS. Dell box shipped with Windows 8 and upgraded to 8.1 via the Windows store. As stated in original post, computer is Dell XPS 8700, I7 cpu with 16 gbs of RAM.
Happy to answer any more specific questions.
Richard

HP Officejet Pro L7590 won't print correctly after it sits a few days Windows Vista USB connection

I have a HP Officejet Pro L7590 All In One. It all of a sudden will not print correctly after it sits a few days. I purchased a new black/yellow printhead recently and it did print well for about a week. If it sits a few days, it acts up again. All I have to do to fix it is take out the yellow/black printhead clean with sterile water on a q tip the printhead, put it back in, and walla it prints again until the next time I want to use the printer, and the same thing again. Today I printed out some pictures after not using the printer for 5 days, the pics had large vertical stripes in them, the stripes have colors in them. I cleaned the printhead and it worked perfectly. Any ideas. I have replaced the black cartride, and the yellow recently.
Thanks for any help

Rocky8,
This is a little outside our area of printing, but I'll try and help you the best I can. My question for you is the printer showing up under the USB menu in Parallels. If it's not showing up then you need to determine why the USB connection isn't showing up in your Parallels USB menu. This could be a couple of issues, but the one that I think might be happening is the version of the USB port your using. Can you verify that you're not connecting the printer via a USB 3.0 port. Try plugging into one of your other USB ports to see if the printer will show up in the parallels USB menu.
BT
Working for HP and here to help!

HP Officejet Pro L7590 won't print correctly after it sits a few days

I have a HP Officejet Pro L7590 All In One. It all of a sudden will not print correctly after it sits a few days. I purchased a new black/yellow printhead recently and it did print well for about a week. If it sits a few days, it acts up again. All I have to do to fix it is take out the yellow/black printhead clean with sterile water on a q tip the printhead, put it back in, and walla it prints again until the next time I want to use the printer, and the same thing again. Today I printed out some pictures after not using the printer for 5 days, the pics had large vertical stripes in them, the stripes have colors in them. I cleaned the printhead and it worked perfectly. Any ideas. I have replaced the black cartride, and the yellow recently.
thanks for your input

Hello pcmtgrl
Which model of the Officejet 8500A series do you have? Typically you can find it inside the printer where you change the ink cartridges. Example: A910g, A910a, etc.
Has anything changed recently since the problem started? Is the printer plugged into a wall outlet or a surge protector? Do you have the latest firmware installed? I also suggest running the HP Hardware Diagnostic Utility. Let me know if it finds anything out.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Does my hp Officejet Pro L7590 have a hard drive?

For Security reasons, is there a hard drive that needs to be removed prior to disposing of my Officejet Pro L7590?

Hello RLJ7, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are looking into your printers memory. There is no removable hard drive. By unplugging the printer you should lose the printer memory. To be safe, you can perform a partial reset. Unplug the power cable from printer when the printer is powered on and wait for 20 seconds. Then, press and hold # and 3 while plugging in the power cord.
Please let me know if you have any more questions. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

Have had HP Officejet Pro L7590 All-In-One Printer for years. Always worked fine and I had no issues printing via wireless connection. Several months ago.. Possibly after a Windows 8 update. From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature. When I try to print or scan it shows the printer as offline. Also get an error message that tells me "HP Imaging device is not found". I can still print when connected to USB. Cannot scan or use features of the HP software suite. I have tried several times to correct. Reloading the software and drivers several times, but no success. I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it. Then tried to print something and got the same error message I have seen in the past. I have talked to certain supports saying that it may be a firewall setting within Windows. Any other suggestions? Thanks

Hi @rfjones002,
Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
I would like you to start with the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and download and install the software here >
HP Officejet Pro Full Feature Software and Driver
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP OfficeJet Pro L7590 network printer

I just upgraded to v4.2.1 on my iPhone 4 and tried to use the new feature, AirPrint without success. My printer is linked using cat5 cable with my wired and wireless router and can be used with about 3-4 pcs within my family. I searched some articles and understand only a couple of HP printers can use this feature. How come Apple spend so much effort for a couple of printers of single company? I never imagined it becomes true. Did I misunderstand this feature? Thanks!

The Officejet Pro L7590 unfortunately will not be updated to support AirPrint. Check out my [FAQ|http://discussions.apple.com/thread.jspa?threadID=2658560&tstart=0] thread for some other options.
Just trying to help.
Andrew

HP Officejet Pro L7590

Anyone who can help:
I've read everything I can get my hands on, here and other fora included.
-Uninstalled the 10.5 software that came with my officejet.
-Downloaded drivers from both Apple and HP that should have corrected the problem (this link http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&cc=us&lc=en&dlc=en &product=1153481 says my hardware is supported for Snow Leopard)
-No scanning from Image Capture, Preview or from the printer window. It won't connect via any of these methods with which others are having success. The device is visible, but no scanner exists with which to scan anything.
Please, does anyone have any idea of what I can do to get functionality out of my Officejet Pro L7590?

Hi @rustyblue,
Welcome to the HP Forums!
Currently there are no full feature software and drivers directly through HP for Mac OS X 10.10 for this particular printer model. However, after some searching I found this driver directly through Apple. HP Printer Drivers v3.0 for OS X.
If you need help with scanning without HP software, please see this post, Re: iMac OS X 10.9.3 Scan to iMac Driver for HP OfficeJet Pro 8500A A910a does not seem to exist, by my colleague @Sunshyn2005. Even though this post is for Mac OS X 10.9.3 and a different printer, these steps will work for your printer on 10.10 as well.
Hope this helps you get up and running, please let me know if you have any further issues!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Officejet Pro L7590 networking problem

Hi!
I have the following problem:
I have an Officejet Pro L7590 All-in-one printer. It is connected to my wlan router (ASUS WL-500G Premium) through its ethernet port.
I have two desktop PCs, i've installed, and using this printer on them without problems. One of them runs on Vista, the other on Windows 7.
But i can't get it work with my notebook. It connects to the router through wlan (Intel WLAN 3945ABG adapter), runs on Windows 7. When i try to add the printer, the installer detects the printer on the network, but during the installation of the device, i get an error, that the device cannot be set up.
I have tried:
-Other (older and newer) versions of printer software.
-Updated printer's firmware, doesn't work either with the original, or the newest version, the problem is the same.
-tried with all firewall settings, it doesn't work even with fully disabled firewall (I'm using Eset 4.0, even tried to remove it)
Does anybody have some idea for this? Please help!

The following are the details about network printer problems in Windows 7:
    “Access is denied” Error
     Not getting Add Printer Wizard
     Choose compatible drivers
“Access is denied” Error
If the “Access is denied” error is showing up on the computer, just go through the steps to fix the error. First, open the Printer Wizard through the Control Panel. Select the ‘Add printer Wizard’, then click ‘Add a local printer’ and then click ‘Create a new port’. Make sure that local port is there in the list and then click ‘Next’. In the Port name dialog box, type computer name and printer name and then click ‘Ok’. Complete the wizard steps to finish the process.
Not getting Add Printer Wizard
In some cases, the Add Printer Wizard may not be available to you. At that time, just open the Printer Wizard through the Control Panel. After that choose the ‘Network Printer’ page and go through the ‘TCP/IP’ page and complete the additional steps in the wizard.
Choose compatible drivers
You need to choose compatible driver in Windows 7. First, you have to click the ‘Start’ button and select and ‘All Programs’. Then, go to ‘Accessories’ and select ‘System Tools’ and then click ‘System Information’. Then, you have to select the ‘System Summary’ and then review the OS Name and System type to find out which version of operating system you are running. Then, accordingly choose the network printer driver for your computer.
Set peace of mind as your highest goal,and organize your life around it.

Hp officejet pro l7590 with blinking memory card error message

Similar Messages

Maybe you are looking for