HP Officejet Pro L7780 won't print individual pages of a file

I have a HP Officejet Pro L7780 setup with wireless printing on my network and am using Windows 7 on a 64-bit computer with MSWord 2007. I'm trying to duplex print just specific corrected pages (like pages 7-8) from a file (of pages 1-22) and my printer just won't do it. When I select to print specific pages, the printer just sits there and then the print queue is apparently dumped, as the tray icon just disappears. The printer will print only all pages of a file or nothing at all. What could be the reason for this and how do I correct it? Thanks, Patricia

Hello tdhoobyar,
Please click here to access the troubleshooting steps that should resolve the issue.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Similar Messages

OfficeJet Pro 8500A won't print test page

This printer suddenly won't print, even a test page. When I try to print from another program I get an error message, document gets stuck in print que. Wireless is recognized. Scan Doctor found printer, still it won't print. Suggestions?

Hi
The problem seems to be with the print spooler service.
since you have already tried the print scan doctor
we can try doing it manually.
Firstly Determine whether the printer is paused or offline
Return to the Devices and printers folder that you opened earlier in this document.
Right-click the name of the product, and then click See what's printing .
Click Printer .
On the print queue menu bar, click Printer , and then look for the Pause Printing and Use Printer Offline items in the menu.
Make sure that there is no checkmark next to either item. If a checkmark displays next to either item, click to clear it.
If these steps resolved the issue , you do not need to continue troubleshooting.
If the issue persists , continue to the next solution
Manually clear the print queue
Return to the Devices and printers folder that you opened earlier in this document.
Right-click the name of the product, and then click See what's printing .
Click Printer , and then click Cancel All Documents .
Click Yes to confirm the action.
If documents remain in the print queue, restart the computer.
Try printing again.
If these steps resolved the issue , you do not need to continue troubleshooting.
If the issue persists , continue to the next solution.
Restart the Print Spooler device
On the Windows taskbar, click the Windows icon ( ), type admin in the Search programs and files box, and then click Administrative Tools .
Double-click Services .
Right-click Print Spooler .
Click Stop to stop the Print Spooler.
Click Start to restart the Print Spooler.
Restart the computer.
Try the print job again
Regards,
Charles Thangaraj
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Officejet Pro L7680 won't print full Page from Win 8.1

Installed driver for this printer on a 64bit Dell XPS running 8.1. The data on the computer says the installation is satisfactory.
The printer printed a full page fax report and self diagnostic page. But when prining a full page from Word, or the internet it will only print about half a page. then it may stop, or it may print a series of pages with a few characters on them. The print queue says that all of the data has been transmitted to the printer. It will print a full page with little content, like a row of x's at the top of the page, a row in the middle, and a row at the bottom. It also prints a full page from excel if the spreadsheet contains only a small amount of data. The same printer prints, faxes, and scans satisfactorily from an older computer running XP. What can I do to the driver to have it print full pages? Printer model no is C8189A, serial No {Personal Information Removed}

I have same problem, hope someone answers.

HP OfficeJet Pro L7780 won't print

My unit will no longer print. It was working fine for printing, and all of a sudden it stopped.
When I click print, or copy, or try any operation that will require the printer to print onto paper (faxing out still works, and scanning to a USB works) the printer gives me an error. It feeds one sheet halfway through the printer, pauses and I can hear the cartridge move across the page, feeds the rest of the sheet and half of a second sheet, pauses, gives an a printer out of paper error, then feeds the second sheet the rest of the way through and waits for me to add paper and press OK.
I have tried pressing OK and went 7 times of the exact same cycle every time before giving up and cancelling.
I have taken off the access door on the back and reset it, thinking something could have jiggled loose. I have unplugged from the device, from the outlet, let sit, unplugged, for upwards of an hour, and plugged everything back in. All to no avail.
Help!

Hello tdhoobyar,
Please click here to access the troubleshooting steps that should resolve the issue.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

Hi,
Can you confirm that you have an Officejet 8500a or Officejet 8500? On the 8500a model, you can set the networks proxy address and port setting from the front panel of the printer (setup>Webservices setup>proxy). If you are unsure what your proxy settings are you'll need to contact your network admin. If your network uses a proxy users name and password for all devices, you need to enter this information along with the proxy address and port in the printers embedded web server. Type the products IP address into an internet brownser window (printer must be connected to the same network as PC). Select the network tab, and than look for the proxy settings option. Enter in the information and click apply. Once the networks proxy information has been correctly inputed into the embedded web server, try printing again. If unsuccessfully, you might try reinstalling the printer software after uninstalling it. Hope this helps!
I was an HP employee
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

HP Officejet Pro 8500 won't print yellow. No error message. Cartridge not out of ink.

Printer won't print yellow. No error messages. Cartidge not out of ink, but did put in a new one and still won't print yellow.

Ok SLU87...here are some steps you can take that should help with your Officejet Pro 8500 A909g not printing yellow:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01980797&tmp_task=solveCategory&cc=us&dlc=en&la...
Let me know if it helps or not.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Hp officejet pro 8500a won't print or copy without turning off then on again

HP Officejet pro 8500A, Will not print, copy or print received fax. HP icon on the Printer screen just spins, but never prints. The print jobs show in the Que, but never print out. If I shut off the printer and turn it back on it will print, but after a short while it stops again. It has also asked for ink to be replaced.

Hello pcmtgrl
Which model of the Officejet 8500A series do you have? Typically you can find it inside the printer where you change the ink cartridges. Example: A910g, A910a, etc.
Has anything changed recently since the problem started? Is the printer plugged into a wall outlet or a surge protector? Do you have the latest firmware installed? I also suggest running the HP Hardware Diagnostic Utility. Let me know if it finds anything out.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

OfficeJet Pro L7780 won't scan in PDF format

I have an OfficeJet Pro L7780 that HP sent me after giving up on fixing a 7310xi. I installed the software an received a "fatal error" message about error code 2203. It went ahead and installed OK - I thought. I even went to www.hp.com/support and searched for that error code. From what I gathered, it had something to do with registering it....so I didn't download their fix. After the installation finished, I went into the scan settings because I do scan quite a bit. I discovered that the PDF file option was not listed in the document scan settings. Only BMP, JPG, TIF, PNG, PCX and FPX are listed, which are, indeed, the file types that are available in the picture scan settings. It's as though the software loaded the same file types in both the document and picture scan settings.
I'm wondering now if the fatal error message actually related to this problem.
Any advice....short of uninstalling the entire package and starting over again?
Thanks....
This question was solved.
View Solution.

DexterM,
Thanks for the speedy reply.
Yes, I do have Adobe Acrobat installed on my PC (It's a new Dell with all the bells and whistles). The error message was short and sweet, as I described in my original post.
Since posting that message, I have, in fact, uninstalled and reinstalled the software on my PC - same results. The only file types available in the scan document setup are the same ones in the scan picture setup. Also, the second time I installed it, I did not get that fatal error message. Lastly, I've installed the same software on three laptops in my house (all networked) and got the same results (no PDF file option in the scan document setup).
I'm stumped and I really dread talking to Mumbai to try to resolve this.
Bill

Officejet Pro 8625 won't print.

Recently purchase Officejet Pro 8625. It won't print from my XP computer, USB interface. I have connected a Vista laptop to it and it prints.
When I send a test page to it, the print dialog box shows the print job status as "spooling", then the job disappears, but it didn't print.
I tried downloading the 8625 basic driver from HP's site. As I walk through the setup, when it asks me to plug in the USB cable, I can't go any further. I don't think that the computer can see the printer. I have another printer, and using the same USB port and cable, I can print without problems.
Thanks for any suggestions!

Hi,
Try following the HP Print and Scan dovtor by selecting Fix Printing and select if that may help resolving the issue:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-135113-1&cc=us&dlc=en&lc=en...
If that does not help resolving the issue, Click on Start > All Programs > HP > HP Officejet Pro 8620 and select Uninstall to remove the software.
Click the Start button and then click on Run.
Type spool into the run dialog and click on OK.
Open the Drivers folder.
Open the w32x86 folder.
Next, open the 3 folder.
Locate the HPBXPSRENDER.DLL file within this folder, right click it and Rename it into HPBXPSRENDER.OLD
Once you are done, download and install the latest software below and check for any difference:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-124140-3&cc=us&dlc=en&lc=en...
Please let me know if that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Officejet Pro 251dw won't print with applications inside Parallels 9

I've used HP printers with my Mac computers for years and had no problems, even when I was working with Windows XP and Windows-based applications inside Parallels Desktop on the Mac. All I would have to do to have the Windows-based software capture the printer (connected with a USB cord) was to click on a drop-down menu item under "USB." Recently I upgraded our OS to Mavericks and had to upgrade Parallels from Version 6 to Version 9. A week ago we had to replace our old HP Deskjet 6500 printer, and we chose the Officejet Pro 251dw. We connected the new printer wirelessly to our home network, and we were able to print from both our desktop iMac and our MacBook Pro with no difficulties. But when I needed to print something from PrintMaster 12, a Windows-based desktop publishing program running on Windows XP inside Parallels Desktop 9, the job wouldn't print, and I got a message that the printer wasn't connected. After doing my own troubleshooting, I spent several hours on the phone with Parallels tech support, including having them connect to my computer over LogMeIn and change all sorts of settings, but the best I could get was that the printer queue report said that the job was printing, but the touch screen on the printer flashed rapidly back and forth from "printing" to the date and time, with a large red X next to the date-time read-out, and still no job printed. After having two or three first-level techs and then a second-level engineer working on the setup, the Parallels people finally gave up and said that the problem must be in the settings inside the printer and that we'd have to have someone who works with printers.adjust them. Has anyone out there had this sort of problem working with Parallels Desktop 9 and the Mavericks OS? It wasn't just the desktop publishing software; the same thing happened when the engineer went into the Windows XP printer settings and tried to print a test page.

Rocky8,
This is a little outside our area of printing, but I'll try and help you the best I can. My question for you is the printer showing up under the USB menu in Parallels. If it's not showing up then you need to determine why the USB connection isn't showing up in your Parallels USB menu. This could be a couple of issues, but the one that I think might be happening is the version of the USB port your using. Can you verify that you're not connecting the printer via a USB 3.0 port. Try plugging into one of your other USB ports to see if the printer will show up in the parallels USB menu.
BT
Working for HP and here to help!

HP OfficeJet Pro 8500 won't print if one cartridge is empty?

Hi,
I have an OfficeJet Pro 8500 printer. I woudn't really need color printing. My yellow catridge run out of ink, and the printer woudn't allow me to print at all since I don't purchase a new cartridge. If it's true, quite sad from a company that is "committed to providing quality products in an environmentally sound manner".
Thanks for your help.

The Officejet Pro 8500 pigmented ink (like paint) and a separate printhead and ink supplies with plumbing to connect them. Some color ink is required to keep the printheads from clogging.
HP wants your printer to be able to print after you replace the supplies. There are some workarounds to force the printer to allow printing even with empty color cartridges, but doing this will likely ruin the printhead and preclude later color printing without replacing the printhead. In the 8500 one printhead is used for Black and Yellow, the other is Cyan and Magenta. The printheads are $65 each, personally I would not suggest overriding the protection as described in this post.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Officejet Pro L7590 won't print correctly after it sits a few days Windows Vista USB connection

I have a HP Officejet Pro L7590 All In One. It all of a sudden will not print correctly after it sits a few days. I purchased a new black/yellow printhead recently and it did print well for about a week. If it sits a few days, it acts up again. All I have to do to fix it is take out the yellow/black printhead clean with sterile water on a q tip the printhead, put it back in, and walla it prints again until the next time I want to use the printer, and the same thing again. Today I printed out some pictures after not using the printer for 5 days, the pics had large vertical stripes in them, the stripes have colors in them. I cleaned the printhead and it worked perfectly. Any ideas. I have replaced the black cartride, and the yellow recently.
Thanks for any help

Rocky8,
This is a little outside our area of printing, but I'll try and help you the best I can. My question for you is the printer showing up under the USB menu in Parallels. If it's not showing up then you need to determine why the USB connection isn't showing up in your Parallels USB menu. This could be a couple of issues, but the one that I think might be happening is the version of the USB port your using. Can you verify that you're not connecting the printer via a USB 3.0 port. Try plugging into one of your other USB ports to see if the printer will show up in the parallels USB menu.
BT
Working for HP and here to help!

HP Officejet Pro L7590 won't print correctly after it sits a few days

I have a HP Officejet Pro L7590 All In One. It all of a sudden will not print correctly after it sits a few days. I purchased a new black/yellow printhead recently and it did print well for about a week. If it sits a few days, it acts up again. All I have to do to fix it is take out the yellow/black printhead clean with sterile water on a q tip the printhead, put it back in, and walla it prints again until the next time I want to use the printer, and the same thing again. Today I printed out some pictures after not using the printer for 5 days, the pics had large vertical stripes in them, the stripes have colors in them. I cleaned the printhead and it worked perfectly. Any ideas. I have replaced the black cartride, and the yellow recently.
thanks for your input

Hello pcmtgrl
Which model of the Officejet 8500A series do you have? Typically you can find it inside the printer where you change the ink cartridges. Example: A910g, A910a, etc.
Has anything changed recently since the problem started? Is the printer plugged into a wall outlet or a surge protector? Do you have the latest firmware installed? I also suggest running the HP Hardware Diagnostic Utility. Let me know if it finds anything out.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

HP Officejet Pro 8630 won't print from tray 2; says there's no paper

Action: Print from tray 2.
Expected Results: Paper feeds from tray 2 and prints.
Actual Results: Printer displays "out of paper" dialog.
Notes: Ever since I purchased the Officejet Pro 8630 six or eight months ago, tray 2 has not functioned. It says there's no paper in that tray. I've tried multiple types of letter sized paper. I've inspected the bottom of the main printer unit and the top of tray 2 for signs of damage; there doesn't seem to be any.
Tray 1 works just fine. It's actually a fantastic printer. The best I've owned. If only Tray 2 would work.

Hi @RouterIncident,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Officejet Pro 8600 won't print PDF's

Just bought a new OJP 8600 (3rd HP printer in a year, starting to get VERY frustrated). I've searched through all of the forums, all over the internet and cannot find a solution. I'm on a Mac OSX 10.9.3. I can't print any PDF files either through Acrobat 10.1.10 or Preview. Please advise. Thank you.

Hi thelmacotton, and welcome to the HP Forums.
I see you are having issues printing PDF's. I would like to try and help.
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend reinstalling the HP Officejet Pro 8600 series Full Feature Software and Driver- OS X 10.9 Mavericks.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Officejet Pro L7780 won't print individual pages of a file

Similar Messages

Maybe you are looking for