HP Officejet6500 and Mac OSX10.9.4

Cannot get wireless connection with MAC using10.9.4 Have reset printer, confirmed wireless connection, but not recognised as being connected to printer by MAC.
Is there a compatable issue? Even the option of a USB connection ?
If so, can someone suggest a solution.?
In the meantime the HP EPRINT facility for emails is working perfect, but only for emails.

Thanks for trying those steps again Sean! Please don't loose faith, as we are getting closer to solving this issue. Since the Embedded Web Sever is not responding, this means the printer and computer are not showing the same connection.
I would like you to restore the network defaults on your printer:
1) Press the setup menu on your printer
2) Touch the Network menu
3) Press Restore network defaults and select yes
Please perform another power cycling just in case it's picking up the wrong connection:
1) Turn off your printer
2) Disconnect the power cord from the back of the router
3) Restart your computer
4) Wait less than 60 seconds, plug the power cord back into the router
5) Turn your printer back on, wait for the computer to turn on
Now, run the wireless setup wizard on your printer:
1) Press setup, then touch network menu
2) Press wireless, then press wireless setup wizard and follow the steps
Once this is complete, try printing another wireless test report to gather the IP address and put this into the Embedded Web sever again. Let me know if this was successful or not.
Your USB cord isn't be recognized on your computer as well. If you would rather connect this printer with a USB cord, then follow this Apple document on USB: Troubleshooting Error Messages.
I worked on behalf of HP.

Similar Messages

Printing PDF with Acrobat 9.0 for CS4 and Mac OSx10.6.2 not working properly.

I downloaded the CS4 for MAC Trial before purchasing. I work on a MacBook Pro OSx10.6.2. The download and installation was successful.
However, upon launching the Adobe Acrobat 9.0 software, I received the following message: "REPAIR SETUP: Acrobat has detected that there are missing components that require repair. Select the optional components you would like to repair and click continue." My choices were: 1) Adobe PDF Printer, and 2) Adobe PDF View Safari Plugin. I chose Continue. When I am in another program (like Quark 7.5), and try to Print to the Adobe 9.0 Printer, the document spools, as if printing, but I do not get prompted to save the PDF anywhere, and when it is done "printing" there is not a document saved anywhere. It appears to be getting stuck in the distilled, although I don't really know. I tried un-installing the entire CS4 software and re-installing and had the same exact thing happen again. Can anyone help?

Do as I do on some items. Install a utility called TypeIt4Me the go to the announcement. Copy the link. choose add clipping give it a name put / or \ at the end so it you type the same words normally it don't trigger the typeIt4Me entry. then when you need to type the words (code used) and wait for TypeIt4Me enter it. the item highlighted in my attachment is this:
http://indesignsecrets.com/acrobats-adobe-pdf-printer-replaced-in-snow-leopard.php
which is the link to the InDesign article about snow leopard and creating Adobe quality PDF's

Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens

Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens. I partitioned my hard drive and I tried installing Microsoft windows and that worked just fine. But I do not understand why it wont install mac os x 10.5????? PLEASE HELP ME. Thanks Hamid

Try a new post in the 10.5 Installation forum.
DALE

Can i install CS3 Indesign and Photoshop on mac OSX10.8.4?

Can i install CS3 Indesign and Photoshop on mac OSX10.8.4? Or do I have to update and can I purchase updates from Adobe? If I can, how much are they?

Yes, should be no problem.
According to the box that came with my copy of CS3 the requirements are "PowerPC G4 or G5 or multicore Intel processor, Mac OSX 10.4.8 or above.
I loaded it onto my new Mac running Mountain Lion with no problems at all and it runs perfectly. InDesign used to crash occasionally under Tiger but has never crashed under Mountain Lion.

I hv lost my icon for iphoto on my Imac Mac OSX10.5.8.   I still hv my pics but can no longer creat albums and events. If I upgrade to the latest Mountain Lion, will my pics go into the new iphoto?       I would like to update Mountain lion.Will

I hv lost my icon for iphoto on my Imac Mac OSX10.5.8.   I still hv my pics but can no longer creat albums and events. If I upgrade to the latest Mountain Lion, will my pics go into the new iphoto?

From where did you lose the iPhoto icon? From the Dock? If so, then it's still in your Applications folder. Find it there then drag the icon back into the Dock. If it's no longer in Applications perhaps you've moved or renamed it. Use Spotlight to search for "iphoto."
Upgrading to Mountain Lion will not affect your iPhoto Library unless you erase the hard drive first. Be sure you backup before any system upgrade.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer)
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
         3. MacBook Pro (Mid/Late 2007 or newer)
         4. MacBook Air (Late 2008 or newer)
         5. Mac mini (Early 2009 or newer)
         6. Mac Pro (Early 2008 or newer)
         7. Xserve (Early 2009)
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     Am I eligible for the free upgrade?
         See Apple - Free OS X Mountain Lion upgrade Program.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Trying to update from desktop CS4 to cloud for photographers. Download went fine until I tried to open and ERROR 16 occurred. Running MAC OSX10.9.5. Tried the fix by going to permissions but the files that should be in the library were not there (SLStore)

attempting to update from desktop CS4 to cloud photographer on MAC OSX10.9.5. Purchased and downloaded photoshop installer and it seemed to run fine. On opening application ERROR 16 occurred. What to do?

Error 16 http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
-including DW039 https://forums.adobe.com/thread/1500609
SLCache/SLStore cause startup crash https://forums.adobe.com/thread/1502079

System Preferences not responding Mac OSX10.7.5

System preferences on my MacBook Air, running Mac OSX10.7.5, will not open properly. It opens on Desktop & Screensaver / Desktop and gets stuck trying to load the images in this area. The only images are the ones that come with the system. This has been like this ever since I chnaged the desktop image to Pink Forest. So i have no acces to any options under the system preferences, can't load printers, nothing.
Can anyone help with a fix please.

Welcome to Apple Support Communities
Try deleting the Desktop settings file. Open Finder, select Go menu (on the menu bar) > Go to Folder, and type ~/Library/Preferences. Then, delete "com.apple.desktop.plist" and "com.apple.systempreferences.plist", and restart. Finally, you will be able to change your background in Desktop & Screensaver

Can't Get MacBook Pro and Mac Pro to Network

I have a MacBook Pro (2008 - 2.5 Ghz. Core 2 Duo with 4 Gb of RAM running OS X 10.6.7) that I have been connecting to my Mac Pro (2005 - 2 2.66 Ghz Xeon with 20 Gb of RAM running OS X 10.6.7) through an Ethernet switch on my school's network. This has worked without a hitch for years, but when I upgraded to 10.6.7 recently, the MacBook and Mac Pro fail to network. On the MacBook Pro, the Mac Pro's icon doesn't show in the shared area, and on the Mac Pro, I can see the icon for the MacBook Pro, but when I click on the icon to connect, I get the message that "Connection Failed There was an error connecting to the server (name of my MacBook Pro). Check the server name or IP address, and then try again." I have tried a direct connect using the "Connect to Server" under the Go menu on both machines, using their IP addresses, but no luck. Is there something I need to re-set to get these two to talk again? I have other Macs on the same network that my MacBook and my Mac Pro can see, and both machines can connect to them. They just can't connect to each other.
Thanks in advance for any ideas you might have on how to fix this.

I fixed the problem by re-setting the default values for my VirusBarrier X6 anti-virus program.

Want to use a Lacie External Hard Disk with Windows and Mac? Can I?...

Hi, I've just purchased a Lacie Extreme D2 external hard disk, I'm looking to use it to move film clips from my Mac G5 to my Sony Vaio laptop. I'll connect the Mac using Firewire 1 and the PC using USB 1.
I understand there is an issue with setting the compaitibility of the hard disk to either Mac or Windows format but I'm wondering if I can set it to both, so it's possible to transfer these files? The hard disk is Windows and Mac compatible but does it have to be partitioned a certain way?
Any help is much appreciated.
Thanks,
Alex

Format the drive as FAT or use the Mac format (HFS Extended) and install MacDrive on the PC.

My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that are causing the problem.
I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
Kernel Extensions:
          com.oxsemi.driver.OxsemiDeviceType00          Version: 1.28.7
          com.rogueamoeba.InstantOn          Version: 6.0.2
          com.rogueamoeba.InstantOnCore          Version: 6.0.2
          com.Cycling74.driver.Soundflower          Version: 1.5.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
             [not loaded] com.adobe.fpsaud.plist
             [not loaded] com.adobe.SwitchBoard.plist
             [not loaded] com.bombich.ccc.plist
             [not loaded] com.dymo.pnpd.plist
             [not loaded] com.intego.BackupManagerPro.daemon.plist
             [not loaded] com.micromat.TechToolProDaemon.plist
             [not loaded] com.microsoft.office.licensing.helper.plist
             [not loaded] com.orbicule.witnessd.plist
             [not loaded] com.sierrawireless.SwitchTool.plist
             [not loaded] com.stclairsoft.AppTamerAgent.plist
             [not loaded] org.macosforge.xquartz.privileged_startx.plist
             [not loaded]          pcloudd.plist
Launch Agents:
                 [loaded] com.divx.dms.agent.plist
                 [loaded] com.divx.update.agent.plist
                 [loaded] com.epson.epw.agent.plist
                 [loaded] com.lacie.raidmonitor.daemon.plist
                 [loaded] com.lacie.safemanager.daemon.plist
                 [loaded] com.micromat.TechToolProAgent.plist
                 [loaded] com.orbicule.WitnessUserAgent.plist
                 [loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
             [not loaded]          .DS_Store
                 [loaded] com.adobe.AAM.Updater-1.0.plist
                 [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                 [loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
                 [loaded] com.divx.agent.postinstall.plist
                 [loaded] com.google.keystone.agent.plist
                 [loaded] com.propaganda.dejavu.dvmonitor.plist
                 [loaded] com.valvesoftware.steamclean.plist
                 [loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
          iTunesHelper
          Synergy
          TomTomHOMERunner
          Dropbox
3rd Party Preference Panes:
          Déjà Vu
          Flash Player
          Flip4Mac WMV
          GR-55
          Paragon NTFS for Mac ® OS X
          Perian
          Printopia
          TechTool Protection
          Witness

HT204291 Airplay mirroring. Macbook 2012 retina display. Unable to see desktop on television, audio works perfectly. Both OS on ATV and Mac are running latest versions

Airplay mirroring.
Macbook 2012 retina display. Unable to see desktop on television, audio works perfectly. Both OS on ATV and Mac are running latest versions.
Firewall set correctly (allow incoming...)
When I click mirroring to turn it on, teh Apple TV screen goes blank (from its home setting)
Any help appreciated.

Hi!
I figured it out! It was a firewall issue.
I use Handsoff and I checked it before i wrote here. There was no "user defined rule" that denied the communication but when i changed to "All rules" the program displayed several rules regarding AppleTV and its IP.
So if anybody has the same problem make sure you see all rules of your firewall and get rid of the AppleTV related rules generated by the program itself. You dont need to update to the latest iOS on the AppleTV!
I hope that I can help some people with this info to fix the problem.

Flash (is it for me?), Wacom Cintiq 22HD, and Mac Mini

I have Flash as part of the CS6 Master Suite, which I purchased primarily for InDesign, Photoshop and Premiere, but as yet I haven't opened Flash. I'm hoping someone here can save me time by advising me whether Flash is suitable for my purposes. I'm not a professional, just a keen amateur, but I do want to use quality software and equipment to do the finest job I can.
Answers to a previous post in the Illustrator forum (Re: Animation – is Illustrator what I should be using?) suggested that I try Flash.
Background
I'll be using Premiere for converting my audio-visuals to HD format. Back in the 1980s I was right into three-screen slide shows. As part of the transforming, I'll be introducing a small number of video clips (hence my need for Premiere) and also short animation sequences, probably 10 seconds at most. The animation will be done by an artist friend who is keen to extend his talents into computer art. If I buy the computer (some sort of Mac), a Cintiq, load the appropriate software, and then loan it all to Steve and show him how to use it, he'll happily spend as much time as required for the animation. We're bartering: he gets to use a computer and tablet for as long as he wants, I get animation.
A typical animation might involve Steve drawing outlines at appropriate intervals, over a background, then having the software generate the in-betweens. Watercolour-style shading (i.e. not fill-type, monotone colour) would be added, probably manually for each frame, unless the tweening can competently handle watercolour-style shading. For some of Steve's doodlings on his iPad (simplified versions of what we're aiming for), check out http://www.mediafire.com/download/sj731c17co55g5w/Steve's_iPad_Work.zip
We're both new to this and recently spent an afternoon together looking at videos on Flash and the Cintiq. The combination looks like it will work for us, but I have a few questions which I'm hoping some of the experts on this forum can answer. A simple yes or no may save me hours of reading documentation only to find out that something won't work as I want. I'll also include some questions about the Cintiq and Mac Mini in case someone who uses them with Flash can provide answers. I live in a place where I have no access to these devices before I buy. I have to buy 'cold'. Thus my wariness.
Please note: I'm not an artist and Steve isn't computer literate. So some of these questions might appear pretty dumb to an experienced user of Flash/Cintiq.
Ques 1
Is Synfig Studio (as suggested at the end of my Illustrator thread) something I should consider? Or is Flash a better bet?
Ques 2
Does Flash have vector tools that mimic a watercolour paintbrush like in Photoshop? Or is that not possible as a vector, and such effects have to be done outside Flash and then imported as background (or other method)?
Ques 3
When a Flash animation is finished, how is it exported, for example, to Premier? Do you export as h.264?
Ques 4
It is not clear to Steve and I after viewing three Cintiq videos, how the Cintiq interfaces to Flash. Does the Cintiq know about Flash, and appropriates certain drawing tools automatically? Or do you have to tell Flash (or the Cintiq) that this button on the Cintiq now operates this tool in Flash?
Ques 5
Do Flash and Cintiq work well together – and easily?
Ques 6
Do I need a monitor to be able to use Flash with the Cintiq? Or would a Mac Mini be a suitable computer – with the Cintiq acting as monitor? Steve won't ever be using this setup as a computer. He'll be treating the Cintiq as a canvas on which to draw and paint.
Thanks in advance for any replies.

Hi Guy,
I thought I was the only one around who was old enough to have worked on wide screen multi-image slide shows!
Flash may be the right product for you and Steve. I use Flash with an Intuos 4 tablet and it works fine. What you want to do is to search the Flash forums for references to Cintiq. There may be some problems that interfere with your intended use, or it may work exactly as you want. The important element for working with any Wacom product is to be sure that you are using the latest drivers for the Wacom product.
If you choose to use a mac mini, get a new one, one that can use a lot of memory, you'll need it.
You can export Flash files to video in most any file type and compression is installed on the computer. So, if you're going to use a Mac, install Quicktime Pro and you should have everything that you need.
I have never heard of or used Synfig Studio, so I can't comment on that.
Flash's paint tools are different from Photoshop and more similar to Illustrator's. You will have all of the flexibility of the Cintiq to control painting effects, it will take some practice, but you should be able to get the effect that you're describing.
Hope this helps with your decision.

How to connect a 23" Cinema display and mac mini to an AV Receiver?

I am trying to get my 23" Cinema display and Mac Mini to a Yamaha RX-2700 AV Receiver. I am on first name terms with the guy in Maplins because I tried to get an Xbox 360 working with this display before and gave up in the end. The AV receiver has upscaling capability so I thought I'd try again. I tried connecting a HDMI - DVI adapter to the HDMI Out on the receiver and a HMDI to DVI cable from the Mac Mini to the HDMI in with a optical cable for the sound. The sound works fine but I get no display - the LED on the monitor flashes three times with a blank screen so it can't read the signal. Another option suggested was to use a VGA Converter connected to a VGA - HDMI cable but I would like to find out if that would work before going down that route?
I am looking for some advice about whether this type of configuation is possible with the 23" ACD and if so what do I need to buy to make it work? I love the quality of my ACD to avoid having to replace it with a TV to get my multi media life in order.
Many thanks

The fifth and sixth item on this page are DisplayPort male to Mini DisplayPort female "Extension cables". Under US$6 plus shipping from a reputable seller:
http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10246#1024602

Im new to the iCloud and Mac in general. After experincing a hard drive crash out of the blue, I lost everything. I want to make sure this doesn't happen again. I show backups for my iPhone and my daughter's iPod but my mac doesn't exist. How do I fix tho

I'm new to the iCloud and Mac in general. After experiencing a hard drive that went out of the blue, I lost everything. I wanted to use the icloud to back my documents up. I went into the iCloud under settings but it only shows my iPhone and daughter's iPod. How do I get my Mac to back up too? Is there something I need to use to have the documents back up?

You cannot back up your Mac to iCloud. Even backing the whole thing up to another online service would be dubious because it would take a very long time. You should buy an external hard disk and back up to that - even better, buy two and use one to make a Time Machine backup and the other to clone your Mac from time to time, thus giving you a backup from which you can boot in an emergency.
If you wanted to back up a suitably sized selection of data to an online service there are a number of third-party methods available, some of which are examined here:
http://rfwilmut.net/missing3

Quicktime encoding using x264 encoder failing in AME 6.0.2.81 and Mac OS 10.8.2

I'm trying to encode an x264 codec Quicktime using AME 6.0.2.81 and Mac OS 10.8.2. I also tried it with two versions of the x264 encoder which I downloaded from here: http://www.macupdate.com/app/mac/24173/x264encoder
This encoder works 100% fine and better than the h264 encoder when using Apple Compressor and Apple QT Pro V7. I've been however trying to transition all of my video encodes to AME due to a number of reasons: dynamic link to AE, Premiere and the interface to name a few.
Everytime I start an encode it gives me an error and I hear that blasted sheep. lol. This is what the log displays, which is frankly probably no help to anyone.
- Encoding Time: 00:00:00
01/13/2013 04:48:10 PM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
I've also tried to specify the bitrate and have had no luck. Whether I specify the bitrate or not, I still get the error. The source video has been PNG sequences and ProRes movies at 1920x1080, 29.97fps. Both result in the same unknown error.
Any suggestions? Thanks!

I know this is pretty old now, but I thought I'd add a reply for those who are having this issue. I just had AME CC 2014 fail on me today, and this is the FIRST thing I've ever tried to render with it. I'm using a TGA sequence and exporting to an X264 codec Quicktime MOV file at 720p. I restarted a few times, repaired permissions etc. and nothing worked except for the following.
I went to:
Library/Preferences/Adobe/Adobe Media Encoder/8.0/
I deleted the entire 8.0 folder (or you could delete whatever version you are having problems with). I then restarted AME and the preferences were recreated and I could successfully use the x264 codec again. Hope this helps someone.

HP Officejet6500 and Mac OSX10.9.4

Similar Messages

Maybe you are looking for