HP Omen Control doesnt work

Hi Guys, Just received my new HP Omen. I am very impressed with the quality and the speed! I have one problem though. The software tool that is supposed to give me the ability to change the function keys mapping and the color of led lighting doesnt work as it should. Well... the software itself works fine. I can add mappings change colours and make profiles. But not of those things actually changes something. So no changing buttons. No changing colours. Nothing. Can someone help me?

The problem here are either caused SW or HW, below can help to clarify SW portion. There are three componets that enable HP OMEN Control feature - BIOS, HP System Event Utilty and HP OMEN Control. Below links will take you to the latest version:1. BIOS (F.23) - http://ftp.hp.com/pub/softpaq/sp71001-71500/sp71090.exe2. HP System Event Utility - http://ftp.hp.com/pub/softpaq/sp71001-71500/sp71156.exe3. HP OMEN Control - http://ftp.hp.com/pub/softpaq/sp70501-71000/sp70894.exe(Please update them in this sequence, reboot system after each install) If you still encounter problem with HP OMEN Control - i.e. P1-P6 key not working, keyboard LED color doesn't change..etc after updating the system to the latest version of software, it's likely that system hardware might require some check-up.

Similar Messages

Tecra P5 - Volume control doesnt work properly

Hi
Since upgrade to Windows 7 64 bit I can't turn the volume all the way down by using the volume control at the front of the notebook. Worked fine under Vista 32 bit.
The volume control still works but no matter how far I wind it to the left there is still sound coming from the speakers.
Any help appreciated.
Thanks
Warren

As far as I know volume control in the past was mechanical but now it works on different way and it is controlled by specific tool/utility.
To be honest Tecra P5 is not known to me but obviously it is Australian notebook model and according to Australian support page this notebook model is not supported for Windows 7.
That doesnt mean you cannot use it but this means there is not software package designed for Windows 7 that can be installed so I think there is no much you can do about it.
I know it is annoying but for volume control you can use Windows option placed in task bar.

Volume control doesnt work through headphones.....

hello
i have a iphone 3gs, and i am using the headphones i got with the phone,
the problem im having is, the volume control on the headphones dont work, the middle button works, like i can change songs and pause, but for some reason i cant up or down the volume through the headphones, i have done it before through the headphones but now they dont work,
is there something i need to do? like any settings or is it a fault in the headphones!!
please help meeeeeee!!!

Plug the headphones in and out a few times while a song or something is playing. This has worked a few times for me. If this doesn't work then turn the iPhone off and back on. This will more than most likely fix your problem.
Make sure you are on the most current firmware. If this doesn't fix it then you could back up your data and then do a restore. Still nothing ... make an appointment with Apple to look at it. Good Luck!

Volume/brightness control doesnt work

hey everyone, im new to this, as well as new to macs. i just got a brand new macbook pro last week and everything was working fine. then the other day i was reformatting my ipod and putting songs on it, as well as ripping my dvds, and the volume button stopped working. actually, most of the top row of buttons stopped working, except for the f11/f12 buttons. i was wondering if anyone else has had this problem or if anyone knows how to fix it? i have the feeling its just my rookie status to macs, but i hope someone can help me. thanks a bunch.

Repairing Permissions and/or Resetting the Power Management Unit (PMU) is known to resolve certain anomalies or conditions, and may help with your symptom. Neither process will compromise or harm anything with your Mac so it’s worth a shot.
Repair Permissions:
Go to: Applications/Utilities/Disk Utility
Select: your Hard Drive
Select: the First Aid tab
Select: Repair Permissions
Resetting the Power Management Unit (PMU)
If the computer is on, turn it off.
Disconnect the AC Adapter and remove the computer's battery.
Press and hold down the power button for 5 seconds and then release the button.
Reconnect the battery and AC Adapter.
Press the Power button to restart the computer.
Ref:
PMU: http://docs.info.apple.com/article.html?artnum=303319
User's Guide: page-95
Regards,

Brightness Control not working after Windows 8 install...

Hi All,
I have a late year 2010 MBA core2duo with 4GB of ram, and I was running Windows 7 for a long time and recently bought a Windows 8 upgrade key. I heard the boot camp drivers were updated so I decided to load it up. I installed the new boot camp drivers on the Windows 7 side before the upgrade (had to use the command line to do the driver upgrade).
Windows 8 is all installed and the only issue I have is the brightness control doesnt work at all. I disabled the adaptive brightness as a lot of threads have been saying. Anybody have any ideas what I need to do to fix this?? It seems to be stuck on BRIGHT.

I have been having the issue of no brighness control when running windows through bootcamp for about 6 months now and have not found any applicable solution online.
While messing around trying to figure it out yet again I noticed that my monitor driver was signed by team viewer...
Sure enough clicking the roll driver back button resolved the issue by rolling the driver back to the Microsoft driver...
So long story short:
Right click "My Computer" click properties
Click device manager (lop left of window)
Expand Monitors section
Double Click monitor
Click driver tab
If the driver here is not signed by Microsot or Apple click the roll back button. My driver version is 6.1.7600.16385 (Driver date 6/21/2006)
Rolling this back instantly resolved my issue. I will now propagate this post to all the threads I saw regarding this issue.
I am running windows 7 x64 Ulti on a 15" rMBP.
Best of luck

How do u reboot the computer when the control pad doesnt work

how do u reboot the macbook pro when the control pad doesnt work??? and does anyone know how to get the control pad to work i cant move the cursor??

By "control pad" do you mean "trackpad?" If the trackpad has stopped working then press the Power button and hold it down for 5-10 seconds. This will shutdown the computer. Insert the installer disc then restart the computer. After the chime press and hold down the "C" key until the computer starts up and you see the spinning gear. Then:
Repair the Hard Drive and Permissions
After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

HP OMEN Control doesn't work on windows 10

The title is self-explanatory, I have the latest drivers and HP software installed.

Solved by updating the HP System Event Utility. Source:http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-OMEN-Control-Software-No-Longer-Works-After-Windows-10/td-p/5169933/page/3

HP OMEN Control Software No Longer Works After Windows 10 Upgrade

HP OMEN Control no longer works after the recent Windows 10 update. Profile switching, keyboard LED colors, zones, fn key options, etc. no longer respond at all. I've found references to this issue during Windows 10 beta testing. Is there a temporary workaround? Will there be a driver update to remedy this problem? Thanks.

I just purchased a new 2015 refurbished PC. It worked great with Windows 8.1. Upon installing Windows 10, The Omen control did not work as well as the fan. Really - hardware failure. Give us a break. So, I went back to Windows 8.1. Also this year, I purchased an Envy X2. This PC included a bluetooth keyboard that kept detatching. Again - REALLY, the keyboard doesn't work. That's a pretty important part of the PC. I searched the forum for answers and all I found was the same old line that HP was working on it. I found meesages over a year old that had this same problem. So, back it went to Best Buy. I used to really like HP computers, but now, I can't say that anymore. So, do I trust HP to fix this in a timely manner, NO. Why - because they had to know about this issue alrady for quite a while. And, they did not fix it. I really hope they prove me wrong.!! I will give them 1 more week to fix it. After that, the PC will be returned. And HP PCs will be off my scratched off my list, except maybe the HP Spectre X360. To my amazement, I am even considering a MacBook Pro. Funny thing - the Spectre X360 is supposed to be a great laptop, But, Microsoft was heavily involved in the design process. That is certainly not an HP confidence buider. HP - THIS IS YOUR TIME TO "STEP UP TO THE PLATE" and fix this mess. TImes like these are opportuniies to win over customers or loose customers to the competiion. I really want to keep this PC. It is by your response to this problem that will determine the outcome.

FATALITY GAMING USB HS-1000 volume control button doesnt work

I have just bought CREATIVE FATALITY GAMING USB HS-1000 headset. Everything is ok, except of volume control button on wire, it just doesnt work. I have installed and updated drivers, nothing helped. I have readed few topic on similar issues, but there wasnt any solution. My OS is winXP SP3.

Have you tested your headset jock or where you plug your headset? It may be coming from that, as you have said you have tested the unit in another pc.

I have the portable BOSE sound dock and after updating my ipod to ios7 the remote control of the dock only works for the volume but doesnt work for skipping songs....Is there a solution to this?

I have the portable BOSE sound dock and after updating my ipod to ios7 the remote control of the dock only works for the volume but doesnt work for skipping songs....Is there a solution to this?

Have you went to Bose"s support site?
Sometimes this works
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
However, sometimes an iOS update breaks compatibility and you will have to wait for an firmware update for the Bose or an iOS update.

HP Omen Control lighting not working

Today I started having an issue where when I try and change the colour of my keyboard through the HP Omen software, it has no effect on the keyboard. Originally my keyboard was stuck to a magenta colour, until I bios updated and turned my keyboard back to red, but now when I try to modify the colour through HP Omen control, no changes are made. I have tried making multiple profiles and assigning different keys to them, but I've had no success in being able to change the colour.
Is there anything I can do to fix this issue?
This question was solved.
View Solution.

Try installing the System Event Utility
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-138787-1&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Trying to install the newest version of itunes on my pc and am getting "program cant start because msvcr80.dll is missing from your computer" reinstalling doesnt work. and then it says error 7 (windows error 126)

trying to install the newest version of itunes on my pc and am getting "program cant start because msvcr80.dll is missing from your computer" reinstalling doesnt work. and then it says error 7 (windows error 126). Any help would be appreciated. Using Windows 7 enterprise on an hp Z600

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I book doesnt work with power cord only

Hello. I was just using my ibook g4 and shut it down. When i tried to turn it back on it worked for about 5 minutes then it shut off. I tried taking out the battery and holding down the power button for 5 seconds among other things. I gave up and borrowed a friends battery, he has the same model as me and that battery doesnt work either. I tried just using the power cord only and that doesnt work either. Do i need to take it in to a professional? I've tried just about everything.

Hey Caesar and Welcome to Apple Discussions,
So your header reads:
"i book doesnt work with power cord only "
Is that right? Will it run only on the battery?
If so this is from the manual:
"The computer runs with battery, but not with the power adapter plugged into
wall outlet
1. Try known-good power outlet.
2. Try known-good power adapter and power cord.
Note:
Verify that power adapter connector glows amber or green. If the power
adapter light is green, turn over the computer and press the battery button. The
battery lights should glow green and stay on if the power adapter is operating
correctly.
3. Reset the power manager by pressing the key combination Control-Option-Shiftpower.
Warning: Make sure you do not hold down the "fn" key when resetting the
power manager.
Warning: Resetting the power manager means you will also need to reset the
date and time (using the Date & Time control panel).
4. Replace DC board.
5. Replace logic board."
and it would help to know exactly which iBook you have but this is pretty generic.
Richard

Foldingathome doesnt work

Hi,
foldingathome doesnt work. the file /opt/fah/FAH502-Linux.exe wont execute. anyone having same issue?

Beta fah5 binary for SMP client (x86-64 bit only) is available from their download page
folding@home SMP faq wrote:
We are also releasing another type of client: the Folding@Home SMP client. SMP means "Symmetric Multi-processing" (...)
The goals of the SMP client and the GPU client are similar: in order to tackle many of the problems of interest (especially related to protein misfolding and aggregation, such as in Alzheimer's Disease), we need to not just have lots of computers participating, but we need results returned more quickly so that we can simulate trajectories of sufficient length. Right now, we achieve this by running for many months to years (indeed, our first Alzheimer's Disease simulations ran for almost two years straight). That's where the SMP and GPU (and PS3) clients come in. They give us considerably longer trajectories in the same wall clock time, allowing us to turn what used to take years to simulate even on FAH, to a few weeks to months.
Moreover, the SMP and GPU clients are complementary. The GPU client can greatly (~30x) speed up a specific type of calculation (implicit solvent calculations), whereas the SMP client can lead to a 4x speed up over the complete range of calculations we need to run. (...)
Our goal is to apply this new technology to dramatically advance the capabilities of Folding@Home, applying our simulations to further study of protein folding and related diseases, including Alzheimer's Disease, Huntington's Disease, and certain forms of cancer. With these computational advances, coupled with new simulation methodologies to harness the new techniques, we will be able to address questions previously considered impossible to tackle computationally, and make even greater impacts on our knowledge of folding and folding related diseases.
This is a beta release and we expect that there will be several bugs, flaws, problems, etc. To minimize problems, we have been testing the client and cores extensively in house and they run well there. However, it's our experience that running in the controlled setup in our lab and running "out in the wild" are very different situations.
Note that it may not be as simple as launching new fah5 binary. From Folding-community forum, i can see
fah5 binary itself is 32 bit : the guy on Ubuntu Edgy x86_64 needs to install the 32bit compatibility package "ia32-libs".
Anyway there's no solution yet for single proc x86_64 like my amd 64 ?
Will give fah5-beta a try just in case.
EDIT
Well, that was worth a try :
$ ./fah5
Note: Please read the licen
se agreement (fah5 -license). Further
use of this software requires that you have read and accepted this agreement.
--- Opening Log file [November 22 17:38:12]
# SMP Client ##################################################################
Folding@Home Client Version 5.91beta
http://folding.stanford.edu
[17:38:12] - Machine ID: 1
[17:38:12]
[17:38:12] Work directory not found. Creating...
[17:38:12] Could not open work queue, generating new queue...
[17:38:12] - Preparing to get new work unit...
[17:38:12] + Attempting to get work packet
[17:38:12] - Connecting to assignment server
[17:38:13] - Successful: assigned to (171.64.65.56).
[17:38:13] + News From Folding@Home: Welcome to Folding@Home
[17:38:13] Loaded queue successfully.
[17:38:18] + Closed connections
[17:38:18]
[17:38:18] + Processing work unit
[17:38:18] Core required: FahCore_a1.exe
[17:38:18] Core not found.
[17:38:18] - Core is not present or corrupted.
[17:38:18] - Attempting to download new core...
[17:38:18] + Downloading new core: FahCore_a1.exe
[17:38:19] + 10240 bytes downloaded
[17:38:19] + 20480 bytes downloaded
[17:38:19] + 30720 bytes downloaded
[17:38:48] Working on Unit 01 [November 22 17:38:48]
[17:38:48] + Working ...
[17:38:48]
[17:38:48] *------------------------------*
[17:38:48] Folding@Home Gromacs SMP Core
[17:38:48] Version 1.72 (November 12, 2006)
[17:38:48]
[17:38:48] Preparing to commence simulation
[17:38:48] - Ensuring status. Please wait.
[17:38:48] Entering M.D.
[17:39:05] 7.4 percent)
[17:39:05] - Starting from initial work packet
[17:39:05]
[17:39:05] Project: 3007 (Run 4, Clone 7, Gen 5)
[17:39:05]
[17:39:05] Entering M.D.
starting mdrun 'SMP-msv-03'
5000000 steps, 10000.0 ps.
[17:39:12] SMP-msv-03
[17:39:12] Writing locProtein: Extra SSE boost OK.
[17:39:12] ocal files
[17:39:12] Extra SSE boost OK.
Now 3 questions for you guys.
- will it works as expected by folding team (SMP) ?
- will it runs on custom kernel recompiled without SMP for single core machines ?
- wonder what kind of flags they're using when building this binary.

Flash player doesnt work on safari, even with the last version 11.6

hello,
Since yesterday, my flash player doesnt work on safari (OS X10.8.2). I tried to update flash with the last version (11.6) from adobe website, but i still have the same probleme. Can you please help me ?
Thank you

If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 4.
1. If you're getting a "blocked plug-in" error, then from the menu bar select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch your browser.
2. Triple-click the line below to select it:
/Library/Internet Plug-Ins
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu. A folder should open. If there is more than one item in the folder with the words "Flash Player" (not "flashplayer") in the name, open the respective Info windows, check the version numbers, and delete all except the latest. You may be prompted for your login password.
3. Re-download and reinstall Flash. Download it from this page:
Adobe - Install Adobe Flash Player
Never download a Flash update from anywhere else.
4. If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked Enable plug-ins.
5. Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
6. In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.

HP Omen Control doesnt work

Similar Messages

Maybe you are looking for