HP Omni 10, It's starting but not able to slide the screen the initial screen is locked

With the power button it is starting.. after the screen saver lock not able to slide to get the password screen. Not sure if the touchscreen gone. do not  have keyboard.. so could not find other way to try.

Hey , Welcome to the HP forums. Have you made any recent changes to your tablet? Did you try installing Windows 10 or run and Windows updates around the time this started? You should be able to access the Recovery Manager by turning on the tablet pressing the Volume Down and Power buttons at the same time. If the touchscreen doesn't work to select the Recovery Manager we can confirm it is a hardware issue. If it lets you then you're looking at a software issue within Windows which a system restore (accessible in the Recovery Manager) should take you back to when it was working and restore functionality. Thanks.

Similar Messages

  • We are facing issue to open a static form PDF in Chrome Browser , which is loaded using Adobe FormService.Able to open in other browsers but not able to open the static forms in chrome with LC 11.0 version

    We are facing issue to open a static form PDF in Chrome Browser
    , which is loaded using Adobe FormService.
    Able to open in other browsers but not able to open the static
    forms in chrome with LC 11.0 version
    Below error message:
    The document you are trying to load
    requires Adobe Reader 8 or higher. You may not have the Adobe Reader installed
    or your viewing environment may not be properly configured to use Adobe Reader.
    For information on how to install Adobe Reader and configure your viewing
    environment please see http://www.adobe.com/go/pdf_forms_configure.
    Please let us know do we have any option for disabling
    <NoXFA/> tag by calling formService. RenderPDF() method on adobe service
    For dynamic forms its working by adding <NOXFA/> in
    DDX xml . only for static forms its not working because we are not using
    assembler service for this forms.
    Please let us know how we can disable XFA in static forms??????????????????

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • I switched on the voice over at its minimum rate and now i am not able to slide the screen and unlock it, i switched on the voice over in ipad 2 ios 6 at its minimum rate and now i am not able to slide the screen and unlock it

    i switched on the voice over at its minimum rate and now i am not able to slide the screen and unlock it, i switched on the voice over in ipad 2 ios 6 at its minimum rate and now i am not able to slide the screen and unlock it  please advise

    You should be able to turn it off on the iPad by using 'a tap-to-select and then double-tap to activate/type process' and 3 fingered scrolling to go into Settings > General > Accessibility and turn it 'off' (so to use the 'slide to unlock' tap the slider and then double-tap it, and to type your passcode tap a digit and then double-tap it etc), or you can do it by connecting to your computer's iTunes : http://support.apple.com/kb/HT4064

  • I am connected to my Wifi but not able to access the internet

    I am connceted to my Wifi but unable to access the internet.  Please help!

    Despite the WiFi connection sign you may not really be connected to your WiFi network.
    Your router may not have given your iPad a valid IP address when the iPad requested it. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • Query Planning enabled - but not able to enter the data

    Hi,
    Created a query which is planning enabled (Check box ticked on Planning Tab in query designer - Start query in change mode checked).
    After execution of the query, if I try to input some plan data, the query is in display mode only. I am not able to input any data.
    Can you please tell me where is going wrong.
    Regards,
    Ravi

    Hi Ravi,
    First of all an input enabled query can only be created on aggregation level.
    As far as your issue is concerned, it seems that your query might not be having
    the required restrictions for the characteristics or are not drilled down.
    Please note that characterictics defined in rows are automatically restricted to a single value , but the same is not the case with the 'Free Characteristic' in the query.
    Please check the restrictions you have made in your query.
    Regards,
    Amit

  • Wifi connected but not able to access the internet

    I was able to connect to the wifi, but can not access the internet. It shows the blue bars, but for example, I can't log into facebook. My laptop, my blackberry are all connected but I can't get the ipod to work. I have removed and reinstalled the network connections, and even adjusted the ip address, to no avail.

    I am not having problems at home, works fine with my home network. In Starbucks or the Airport I can't exactly go change their router settings. I think Apple has a problem here that they need to fix. There is no reason why the Ipod Itouch WiFi settings have to be so difficult, cranky. It shoul dbe able to work more easily.

  • I am using the same account for both my Apple TVs but not able to open the movie I purchased on both tvs?

    I have two Apple TV's one in my living room and one in our bedroom. I purchased a movie series on the tv in the living room but was not able to open on the tv in the bedroom. I am using the same account for both Apple TV's. Can anyone assist?

    Wecome to the Apple Community.
    For the avoidance of doubt, are you able to play the TV show on the Apple TV on which you bought it and it is a TV show and not a movie is it.
    What do you mean can't open it, what exactly happens.

  • I have a MacBook Pro Mid 2012. I have a sony DCR-PC350E . How do i transfer the video to the laptop ? I have firewire cable. But not able to find the firewire port in the video camera.

    Need help.

    The DCR-350e is a miniDV camcorder.  It has a FireWire port, but it's not on the camera itself, it's on the cradle (aka "Handycam Station") that should have come with your camcorder.   You need to insert the camera into the cradle in order to capture video via FireWire.
    Here's a link to the Owners Manual.  See p. 142 for a diagram that shows the DV (iLink) port on the cradle.
    You also need an appropriate cable to connect to your MacBook Pro. Check your MBP to see what port(s) it has:
    Some 2012 MBPs have a FW800 port, in which case you need a 4-pin to 9-pin FW cable like this one. 
    Some 2012 MBPs only have a Thunderbolt port, in which case you need the Apple Thunderbolt-FireWire Adapter in addition to the FireWire cable.

  • My iPhone 5s will let me receive texts but not able to send

    I can get texts sent to me and can enter the sender and my msg but not able to hit the send button.

    Check with your carrier that your text plan is properly provisioned.
    Check Settings > Messages >
         iMessage: ON
         Send as SMS: ON
         Show Subject Field: OFF

  • Remote Object - not able to get the returned value from java method

         Hi ,
    I am developing one sample flex aplication that connects to the java code and displays the returned value from the
    java method in flex client. Here I am able to invoke the java method but not able to collect the returned value.
    lastResult is giving null .  I am able to see the sysout messages in server console.
    I am using flex 3.2 and blazeds server  and java 1.5
    Here is the code what I have written.
    <?xml version="1.0" encoding="utf-8"?><mx:WindowedApplication  xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" backgroundColor="#FFFFFF" initialize="initApp()">
     <mx:Script><![CDATA[
    import mx.controls.Alert; 
    import mx.binding.utils.ChangeWatcher; 
    import mx.rpc.events.ResultEvent; 
    import mx.messaging.*; 
    import mx.messaging.channels.* 
    public function initApp():void { 
         var cs:ChannelSet = new ChannelSet(); 
         var customChannel:Channel = new AMFChannel("my-amf", "http://localhost:8400/blazeds/messagebroker/amf");     cs.addChannel(customChannel);
         remoteObj.channelSet = cs;
    public function writeToConsole():void {      remoteObj.writeToConsole(
    "hello from Flash client");
          var returnedVal:String = remoteObj.setName().lastResult;     Alert.show(returnedVal);
    //[Bindable] 
    // private var returnedVal:String; 
    ]]>
    </mx:Script>
    <mx:RemoteObject id="remoteObj" destination="sro" /> 
    <mx:Form width="437" height="281">
     <mx:FormItem>  
    </mx:FormItem>  
    <mx:Button label="Write To Server Console" click="writeToConsole()"/>
     </mx:Form>
     </mx:WindowedApplication>
    Java code
    public  
         public SimpleRemoteObject(){  
              super();     }
      class SimpleRemoteObject { 
         public void writeToConsole(String msg) {          System.out.println("SimpleRemoteObject.write: " + msg);     }
         public String setName(){          System.
    out.println("Name changed in Java"); 
              return "Name changed in Java";
    And I have configured destination in  remote-config.xml
    <destination id="sro">
       <properties>    
        <source>SimpleRemoteObject</source>
        <scope>application</scope>
       </properties>
      </destination>
    Please help me .

    You are not able to get the returned value because if you see the Remote object help you will realise you have to use result="resultfn()" and fault = "faultfn()"
    In this you define what you wish to do.
    More importantly in the remote object you need to define which method you wish to call using the method class like this
    <mx:RemoteObject id="remoteObj" destination="sro" result="r1" fault="f1"  >
         <Method name="javaMethodName" result="r2" fault="f2"/>
    <mx:RemoteObject>
    r2 is the function where you get the result back from java and can use it to send the alert.

  • Not able to download the field names in GUI_DOWNLOAD(very urgent)

    Hi All,
    I am downloading the file contents to the presentation server.i am able to get the file contents proeprly but not able to download the field names into text file.
    Can anybody please help me in this issue..? its very urgent. Valuable answers will be rewarded.
    CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          filename                = w_filename
          filetype                = 'DAT'
         write_field_seperator   = c_x
          col_select              = c_x
          COL_SELECT_MASK         = t_mask
        TABLES
          data_tab                = t_tab
          fieldnames              = t_colnames
        EXCEPTIONS
    Thanks & Regards,
    Satish.

    Hi,
    I have tried in both ways its not working.
    while a ran the program it is going to the dump.
    I am working in mySAP ECC6.0
    Can pl you suggest other way..
    Thanks & Regards,
    Satish.

  • Not able to display the image on the popup.

    hi,
    my requirement is: i have command link on the form.which on clicked should display a popup and with in that popup a image should be shown. I have stored that image in the form of byte array.
    On clicking the link i am able to show the popup.But,not able to display the image on the popup.
    thanks in advance.
    Srikanth.V

    Hi,
    how do you access the image? Put yourself in our shoes and look at your question and then add the missing information. E.g. does the image show if loaded on a page itself and not a popup ?
    Frank

  • I am not able to see the photograph when i am attaching my iphone with laptop. is it possible to see the photos without installing itune on the laptop.

    Hi is it possible to see the photos on laptop from iphone without installing itune software. I am connection my iphone with laptop but not able to see the phots pls guide me how to do that?

    You can import pics taken with the iphone to your computer withour itunes.  Itunes has nothing to do with importing pics taken with the iphone.

  • SECATT - Not able to see the screen shots

    Hi All,
    I am trying to execute the SECATT for one of the testing of HR, but I am not able to see any of the screen shots in downloaded folder.
    While executing the test script I had selected the check boxes
    1) Save Screen shots
    2) Before User Inputs
    3) After user Inputs
    I am able to see the folder created after each executiion of the test script, but not able to see the screen shots in any format (like some of the blogs mention that screen shots will be in JPEG or in BMP format).
    We are on ECC6.0 EHP7 and we are using the sap GUI 730.
    Kindly Suggest.
    Regards,
    Umesh Chaudhari.

    Hi Umesh,
    I suspect that one of the below mentioned option is the reason for not getting the screen shots.
    1. It could be something to do with the SP level that you have.
    2. It could be because of a different path mentioned in Screenshot Path (default or user specific).
    3. The default path for the file containing the external variants is specified in the user-specific settings. 
    Procedure
      1.  From the menu in eCATT or the ABAP Workbench (transaction SE80), choose Utilities → Settings.
      2.  On the eCATT tab, choose the relevant tab and make the required changes.
    Path for Screenshots
    You can specify the default path for screenshots taken during the replay of SAPGUI commands.
    Regards,
    PB

  • Not able to find the New ods created in Query Designer.

    Hi,
    I am trying to create a new query on an ODS(new) in Query Designer but not able to find the ODS . The ODS is present in the system however when we check . Please advice whats going wrong.

    Hello Prakash,
    I know the solution
    Go to RRMX -> Queries -> Select New Query -> and then click on InfoArea -> Select ur new ODS -> and Click OK
    U will be able to see characteristics and keyfigures..
    Drag and drop and click on execute....
    Reward if its helpful.....
    Thanks,
    Sonu

Maybe you are looking for