HP Omni 100 desktop AIO Model SG1008IL powering off automatically

1. Product Name and Number -
HP Omni 100 desktop AIO, Model SG1008IL, {Personal Information Removed}
2. Operating System installed -
Ubuntu 12.04
3. Error message -
Nil
4. Any changes made to your system before the issue occurred
Motherboard replaced with DESKTOP-HP-MBD-MBD-OMNI 100-6110IX-#637783-001 in Feb 13 due to failure of IC due to power fluctuation which was not covered under warranty.
5. In the subject title, include a brief, specific description of the problem, and your product information -
Post replacement of motherboard, the PC worked fine for over two three months later to that the PC has been shutting down on it's own and sometime restarting on it's own. And most of the times once it shuts down it doesnt power on after pressing the power button and UPS has to be shut down and switched on and PC automatically turns on.
Request assiatance with the above problem. And it i would also like to know what is the warranty in case of my PC as the local HP service center denied to check up and tell the warranty period.

lanka,
This is a peer-to-peer user supported forum for HP products. HP maintains no official presence on this forum. It is unlikely that HP will respond in an official capacity. Any reply from a HP employee represents their own opinion and not that of HP's.
We do not have access to to any service records or warranty information concerning your computer, therefore we can't answer these kinds of questions. What we can do, is assist you in troubleshooting and resolving your issue(s).
You have posted information for two vastly different computers in your request for assistance. Please indicated whether your issues are with the HP Omni 100-6110ix Desktop Computer or the Compaq Presario SG1008IL Desktop Computer and try to clarify your statements and questions.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

Ipod prob. Powers on, Powers off automatically..

My ipod will always say please wait low battery. Then it automatically powers on.. goes to the language selection screen, then says do not disconnect... then it powers off automatically and does this all over again. Someone please help me find out what the problem is and how do i resolve this. Thank you.

My 30 gig 5th gen does the same thing, only it doesn't appear in itunes so I can't restore it. Help us out!!

BB Z10 Powers off automatically/screen freezes

I see I am not the only customer whose BB Z10 powers off automatically or has their BB screeen go black or freeze. This is the second phone since I purchased on May 2. Can anyone give me a suggestion as to what to do. I really like this phone, but don't like phone powering off in the middle of an email. Help.

Troubledbbuser, let's unfreeze your device and stop it from powering off by itself. Have you downloaded a few applications to your device? Some application's software can affect the performance of your device. I recommend that you delete any unwanted applications on your device and power it off/on. Keep us posted and reach out to us on Twitter @VZWSUPPORT if need additional assistance.
Lasina_VZW
Follow us on Twitter @VZWSUPPORT

Sprint iPhone powers off automatically

I have a Sprint iPhone and it keeps powering off by itself. I will go to use it and I can't turn it back on by hitting the home button or the power button. I thought the battery was dead but when I plugged it in and held the power and home button for about ten seconds it came back on with the Apple logo. The battery showed 97% so my only thought is that it is power down by itself somehow. This last time it was sitting on my desk so it wasn't hitting something in my pocket or anything. Any thoughts?

This is not normal nor acceptable so if there was no change after a full restore, I think it is time you called AppleCare or if you live near an Apple Store, make an appointment to have your iPhone checked. If you are past the 14 day window after purchase, if there is a problem discovered that requires a repair or replacement, the Apple Store will send your iPhone off to AppleCare anyway so I would start there first regardless.

HP Omni 100 PC Problem (Screen Color Flashes)

Hello, I have an HP Omni 100 PC Here with a big problem with it's monitor. Here are the numbers. Serial #3CR04208G2 Model 1005050 Product # BT590AA#ABA When I start up the computer, it loads up fine, I can hear it turn on, but the screen flickers between red, blue, and green lines with some gray in the middle. What is the problem and what can be done about it? The computer has become beyond unusable! Any help would be appreciated.

Hi ELGODOX,
Welcome to the HP Forums!
I see that your desktop's display is experiencing some image-quality issues, and I would be happy to be of assistance! To begin, I will need to ask you a few questions:
What is the Product and Model Number of your desktop?
Is the power cord securely plugged into the computer?
Did you install any new hardware or software recently?
In the meantime, I recommend following this document on Testing for Hardware Failures (Windows 7). This should help test for any deficiencies in the graphics, display or video.
Please re-post with the necessary information, and I look forward to your reply!
Cheers
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I have a Powerbook G4. I want to use an iMac desktop, the model that is shaped llike a lamp, as an external monitor. Can I do this with firewire or USB cable or do I have to have a different cable?

I have a Powerbook G4. I want to use an iMac desktop, the model that is shaped llike a lamp, as an external monitor. Can I do this with firewire or USB cable or do I have to have a different cable?

You need a network connection and a product such as ScreenRecycler. All such products require a bootable OS on the iMac.
(58362)

Wall mounting Omni 100 all in one PC

I am looking for an adaptor to mount my Omni 100-5050 all in one PC to the wall. Having trouble finding an adaptor. Any suggestions would be great! Thank for you help.

I am aware #2 was a lead into the style of mount. The google link did reference the 5050.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

"Flexible" Linux desktops remain marked as 'Used' despite being powered off

I remember reading in the release notes for VDI3 Patch #2 that non-Windows OS such as Linux should now be properly 'recycled' as well (I thought that this was why VirtualBox was upgraded from 2.0.8 to 2.0.10)
Either I am doing something wrong or there is still a bug ... But on the POC setup I am currently working on the recycling just never ever happens. Linux VM's are still being considered as being "in use" despite having been powered off. I played with the power management settings so the Linux VM should automagically go to 'sleep' after a few minutes of idle time. If I don't do that the Linux VM's are running forever. I also tried playing with the Kiosk timeout settings. The default was "12000" seconds, so for the sake of testing I put it as low as 300 seconds (= 5 minutes). But this too doesn't change anything.
So the big question here: How can I force VDI3 to consider Linux desktops as being "Idle" and thus "unused" so it would properly trigger the desktop recycling?
EDIT: Right now I am using this shell script as 'Workaround' ... You'd just need to add it to a "cron" job or something like that. Comments on improving this rig are welcome :-)
#! /usr/bin/bash
FLEXVDAPOOLS=`/opt/SUNWvda/sbin/vda pool-list | /usr/bin/tail +2 | /usr/bin/grep 'flexible' | /usr/bin/awk {' print $1 '}`
for POOL in $FLEXVDAPOOLS
    do
        export POOL
# The following line should countain exactly 10 x whitespaces between the words 'Powered Off' and 'Used' on the same line
        /opt/SUNWvda/sbin/vda desktop-delete `/opt/SUNWvda/sbin/vda pool-desktops $POOL | /usr/bin/grep 'Powered Off          Used' | /usr/bin/awk {' print $2 '}`
done
unset POOL.
Edited by DJ .... My workaround is working.

If the user powers off the desktop (instead of just logout),
then the desktop is not correctly detected as idle. Sorry, but this does not seem to be true. If the user really shuts down the VM then VDI3 does correctly detect the VM as being "idle" and initiates the recycling. What we did here is that we configured the Ubuntu VM's to go into hibernation after 15 minutes if they're idle. I know, I know: Hibernation doesn't work. That's not the point. The point is that VM's won't consume too many resources on the desktop provider if they are idle. To VDI and VirtualBox such a "hibernating" system appears to be "Powered Off" as well, so we assumed it would trigger the recycling too. But it just doesn't happen, such an auto-hibernated Ubuntu VM is still being considered as being "Used" ... which is kind of silly: How can it be "used" if it's "Powered Off"? Especially since we're talking about a flexible pool. By logic a VM can't be "used" in a flexible pool if it's "Powered Off". Hence my workaround above (customer is very happy with it).
I share Dirk's view ... this seems to be a bug. VDI should regard "Powered Off" VM's as being "Idle", especially if they are in a "flexible" pool.

Restar Hp Omni 100 all in one w/o seeing screen

our Hp Omni 100 randomly began to not display a picture. we want to get rid of it but we still have personal information on the computer like pictures and stuff. how do I reset the computer to factory settings without seeing the screen ?

I would suggest you remove the hard drive (example 100-5050), and use an adapter to access and copy the files.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Exported a 3 minute video from iMovie to Quicktime, saved on my desktop. It started saving as INDIVIDUAL files, as in about 5400! Entire system froze, completely unresponsive. Powered off 3 times now, it comes on and displays my screen saver but nothing

Exported a 3 minute video from iMovie into Quicktime, saved to desktop. System started saving INDIVIDUAL frames instead and entire system froze. Powered off and on twice - screensaver appears, but that's it - nothing else is accessible

Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
You may now be able to log in and move the files off the Desktop. Then reboot as usual.

Omni 100-5100z Failure to power up

I have an all-in-one Omni 100-5100z. After successfully shutting it down one evening I attempted to power it up the next day. The unit did not power on -- not even a hint of life. I noted that the green LED above the the jack where the power adapter plugs into did not illuminate (as it should when the power button is turned on). Any ideas as to the best place to begin to troubleshoot the problem? The AC adapter, the power supply, or the motherboard?

swizzletik,
Sorry you got a wild goose chase. It happens. Dunidar meant well.
The power (PSU) supply for the Omni is similiar to a laptop power supply. When plugged into the Omni, it turns on a LED to comfort the user. (Gotta love those little lights). As your's is not "on", you'll need to test the PSU.
First, be sure the wall cord is firmed pushed into the power brick. It does come out and loose contact (sometimes). Picture of it. Replacement or here with all the specs
Omni 100-5100z specs power supply specs "Power Supply - Ext AC Adpt Lolonis-R 90W RT Angle Connector", with part # 619752-001.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Problems when the GPIB-ENET/100 is powered off.

Is there a way, other than Ping, to prevent the long timeout periods when a GPIB-ENET/100 is in or enters a bad state such as powered off?
Attachments:
GPIB_Power_Problem.doc ‏23 KB

Hi,
I did some tests and searched through the documentation, but I couldn't find any NI-488.2 function that would explicitly verify if the IP address is valid.
An EDVR means that an operating system error occured. Some function within the driver failed and the error code returned by the function is store in ibcnt.
You could use this error to as a signal that the ENET is not there or it is off. Any EDVR means some fatal error occur, so you can assume you need to restablish communication. It doesn't matter if the ENET is off or the network is failing, in any case the EDVR will indicate a fatal condition.
You can then call a function that handles this situation by calling ibonl(ud,0) to close the handle (which i think will also return an EDVR error)
and then try to restablish communication using the ibdev function.
The reason the timeout value doesn't affect the time it takes for the function to return is that the timeout is used to abort GPIB operations, not function calls. The timeout value is used by the ENET firmware to determine when to abort an I/O operation on the GPIB bus. The driver doesn't use this value to timeout the network communication.
Finally, you could use the windows socket API in your code to determine if the IP address is valid. You could probably find some simple ping code that you could include in your application.
Hope this helps.
Diego

Upgrading to ssd for omni 100

I want to upgrade my Omni 100 with an ssd. Is there an after market one that is compatible and won't cost a fortune. I'd like 256 or more GB, but the store is quoting almost $500 (includes installation). Thanks.

http://www.newegg.com/Product/ProductList.aspx?Submit=Property&N=100008120%20600038510%20600038519%2...
Any of these will work _ stick to a good band name with a good warranty reputation like Crucial, Samsung or Kingston.
That 500 dollar charge is not un-reasonable.
That covers the labor of re-installing the OS (drivers too for example), your personal files, programs, reactivating them etc....
It's allot of work.
There are applications that save all this stuff that promise an easy transfer, but they can be unreliable _ sometimes...

My year old mid 2010 Macbook Pro keeps powering off and leavin this error code. Any help would be hugely appreciated.

Hi, as the title reads my year old mid 2010 Macbook pro keeps powering off and leaving the below error message.
I'm a university student and desperately need my mac to hit deadlines etc. If anyone could suggest a solution or shed any light i'd be hugely appreciative. Thanks SO much. Joe
Interval Since Last Panic Report: 42069 sec
Panics Since Last Report:          1
Anonymous UUID:                    CA297B40-FD7E-38B9-3447-C39824B28ECA
Mon Jan 7 17:48:24 2013
panic(cpu 0 caller 0xffffff7f9eed9b25): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0x0a2910de 0x00100000 0x00000000, BAR0 0xd2000000 0xffffff81308cd000 0x0a5480a2, D0, P3/4
Backtrace (CPU 0), Frame : Return Address
0xffffff813083a9f0 : 0xffffff801da1d626
0xffffff813083aa60 : 0xffffff7f9eed9b25
0xffffff813083aaf0 : 0xffffff7f9efd34b3
0xffffff813083ab50 : 0xffffff7f9efd3527
0xffffff813083abc0 : 0xffffff7f9f2db853
0xffffff813083ad00 : 0xffffff7f9eff9659
0xffffff813083ad30 : 0xffffff7f9eee38da
0xffffff813083ade0 : 0xffffff7f9eedefac
0xffffff813083afd0 : 0xffffff7f9eee01d8
0xffffff813083b0a0 : 0xffffff7f9f8382a1
0xffffff813083b220 : 0xffffff7f9f8355d7
0xffffff813083b2a0 : 0xffffff7f9f8363b4
0xffffff813083b330 : 0xffffff7f9f836973
0xffffff813083b460 : 0xffffff7f9f837428
0xffffff813083b570 : 0xffffff7f9f8559de
0xffffff813083b5b0 : 0xffffff7f9f856be2
0xffffff813083b860 : 0xffffff7f9f8698f4
0xffffff813083b9d0 : 0xffffff7f9f86a240
0xffffff813083ba10 : 0xffffff7f9f86aadf
0xffffff813083bae0 : 0xffffff7f9f86acc2
0xffffff813083bb20 : 0xffffff7f9f85ff20
0xffffff813083bb50 : 0xffffff7f9f84228f
0xffffff813083bba0 : 0xffffff801de665b3
0xffffff813083bbc0 : 0xffffff801de6718d
0xffffff813083bc20 : 0xffffff801de64b8f
0xffffff813083bd70 : 0xffffff801da981e1
0xffffff813083be80 : 0xffffff801da20aed
0xffffff813083beb0 : 0xffffff801da10448
0xffffff813083bf00 : 0xffffff801da1961b
0xffffff813083bf70 : 0xffffff801daa5b16
0xffffff813083bfb0 : 0xffffff801daced53
      Kernel Extensions in backtrace:
         com.apple.NVDAResman(8.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f9ee72 000->0xffffff7f9f174fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f9e050000
            dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f9ee60000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f9edb8000
         com.apple.nvidia.nv50hal(8.0)[9F3D09B5-3158-3D9E-BDA3-E71576AAD3B7]@0xffffff7f9 f175000->0xffffff7f9f497fff
            dependency: com.apple.NVDAResman(8.0.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f9ee 72000
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f9e050000
         com.apple.GeForce(8.0)[2E56ED9A-D848-3795-9E52-56BABDC9000C]@0xffffff7f9f7ff000 ->0xffffff7f9f8c1fff
            dependency: com.apple.NVDAResman(8.0.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f9ee 72000
            dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f9ee60000
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f9e050000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f9edb8000
BSD process name corresponding to current thread: PluginProcess
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x000000001d800000
Kernel text base: 0xffffff801da00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 4567640256295
last loaded kext at 291508757115: com.apple.filesystems.msdosfs          1.8 (addr 0xffffff7f9fbc1000, size 65536)
last unloaded kext at 352521325148: com.apple.filesystems.msdosfs          1.8 (addr 0xffffff7f9fbc1000, size 57344)
loaded kexts:
com.apple.filesystems.smbfs          1.8
com.apple.filesystems.udf          2.3
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
com.apple.driver.AudioAUUC          1.60
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AGPM          100.12.69
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleIntelHDGraphics          8.0.0
com.apple.driver.AppleHDA          2.3.1f2
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.GeForce          8.0.0
com.apple.driver.AppleMikeyDriver          2.3.1f2
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.AppleSMCLMU          2.0.2d0
com.apple.driver.AirPort.Brcm4331          602.15.22
com.apple.driver.ApplePolicyControl          3.2.11
com.apple.driver.AppleMuxControl          3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleIntelHDGraphicsFB          8.0.0
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.driver.AppleUSBTCButtons          235.4
com.apple.driver.AppleUSBCardReader          3.1.0
com.apple.driver.AppleIRController          320.15
com.apple.driver.AppleUSBTCKeyboard          235.4
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.XsanFilter          404
com.apple.driver.AppleUSBHub          5.2.5
com.apple.iokit.IOAHCIBlockStorage          2.2.2
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleUSBEHCI          5.4.0
com.apple.driver.AppleAHCIPort          2.4.1
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.kext.triggers          1.0
com.apple.iokit.IOSurface          86.0.3
com.apple.driver.DspFuncLib          2.3.1f2
com.apple.iokit.IOAudioFamily          1.8.9fc10
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOBluetoothFamily          4.0.9f33
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.3.1f2
com.apple.iokit.IOHDAFamily          2.3.1f2
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IONetworkingFamily          3.0
com.apple.driver.AppleGraphicsControl          3.2.11
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.nvidia.nv50hal          8.0.0
com.apple.NVDAResman          8.0.0
com.apple.iokit.IONDRVSupport          2.3.5
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.iokit.IOGraphicsFamily          2.3.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
com.apple.iokit.IOUSBMassStorageClass          3.5.0
com.apple.driver.AppleUSBMultitouch          235.7
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleUSBMergeNub          5.2.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOUSBUserClient          5.2.5
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.2.1
com.apple.iokit.IOUSBFamily          5.4.0
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7.2
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.8 GHz, 8 GB, SMC 1.58f16
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3030352E4130324C4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3030352E4130324C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500325ASG, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N, 7.99 GB
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 5
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0xfa120000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 6
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3

Welcome to the Apple Support Communities
It looks like your NVIDIA graphic is damaged. If you need your computer now, you can fix the computer downloading gfxCardStatus and selecting the option to use only the integrated graphic, so that kernel panic won't appear anymore. Note that you won't be able to use the NVIDIA graphic, so the graphic performance may be worse than with this graphic.
Of course, that's a temporary fix, because you should take the computer to an Apple Store as soon as possible to get the Mac repaired. As the NVIDIA graphic is not soldered, the repair won't be expensive

ZBook 17 powers on automatically when the battery is removed and placed back

Hi all,
I am an IT engineer with a 15 years hands on experience and troubleshooting skills.
2 of the laptops I own are ZBook 17.
One is a UK import (F0V53ET, manufactured in October 2013) and the other is a US import (D5D93AV, manufactured in April 2014). Both of them are running the latest BIOS revision (v01.21).
The strange problem I encountered is as follows:
At the D5D93AV when the AC and the battery are removed (i.e. for upgrading the RAM), when the battery is placed back in, the system automatically powers on. Same applies if there is NO battery attached and the AC plug is attached.
At the F0V53ET, this does not happen (and the normal is NOT to happen).
What I tried to do so far to see if the problem is resolved at the D5D93AV:
1) I upgraded the BIOS to the latest version (v01.21) at both the ZBooks.
2) Ensured that BOTH the laptops have exactly identical BIOS settings.
3) Ensured that turn on the machine while on AC is UNCHECKED.
4) Ensured that there are no power on options enabled (like the timed power on, e.t.c.)
5) Tried to disable settings like "USB charge, wake on USB" e.t.c.
6) Tried to remove the CMOS battery, press the power button with no battery or AC to fully discharge, attach the CMOS battery after a minute to ensure the CMOS was cleared and placed everything back.
7) Tried to replace the OS from Windows 8.1 Pro to Windows 7 Pro to see if it has an impact to the UEFI Bios settings (i.e. any conflict with Hybrid sleep e.t.c.).
8) Tried to enable "Power on while on AC" to see if the system behavior changes. When the battery is attached and the AC is also attached, it will power on if the "Power on while on AC" is enabled (so this works as expected).
9) The problem gets reproduced ONLY when there is either no battery and the AC is attached, or when the battery is attached without the AC (i.e. after reassembling the machine after a RAM upgrade). Then it powers on automatically.
10) I also swapped the batteries between the 2 ZBooks but the issue with the US model is not resolved either. The battery works fine.
It seems to be either a BIOS issue, or a Power Board issue (hardware fault). The UK model behaves as expected, while the US model seems to have these issues.
Any ideas will be really useful.
So far this is what I did not try yet (due to lack of time):
11) To attach the US model to a docking station and see how it behaves.
12) To disable or enable the Hybrid sleep from the Bios (instead of leaving this to AUTO).
13) To replace the CMOS battery (swap them between the 2 Zbooks), although I don't think it might be the battery as the US unit is NEW with 12 hours of use.
14) To completely remove (or swap) the Optical drives and see if the problem still persists. I know there are some really rare occassions that the Optical drive might be partially faulty and short circuiting. It may sound crazy, but I have seen and experienced this more than 3 times espexially at desktop machines.
Any info or tips will be useful, although I am afraid I may have to escalate it to the 3rd line of HP as it is a really odd issue.

Hello, @panoulix
To get your issue more exposure I would suggest posting it in the commercial forums since the HP ZBook 17 Mobile Workstation is a commercial product. You can do this at Notebook - HP ProBook, ZBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
The support page for your product may be helpful in the meantime:
HP ZBook 17 Mobile Workstation.
I hope this helps!
Thank you for posting on the HP Forums.
I worked on behalf of HP.

HP Omni 100 desktop AIO Model SG1008IL powering off automatically

Similar Messages

Maybe you are looking for