Hp p1005 print quality and options in snow leopard

This is a great idea to have built-in drivers in Snow Leopard but I experience problems with my laserjet p1005. Thus I lost options I had in Leopard like the manual recto-verso and the printing quality is not as good as it was in Leopard. Though my system is up to date and I have the most recent version of hp driver installed.
I am a graduate student who need to print a lot of stuff and this forced me to downgrade to Leopard.
Is Apple gonna do something about that?

simon22 wrote:
Is Apple gonna do something about that?
Probably not. The drivers come from HP, so any changes will have to come from them.

Similar Messages

Can't print from Intel Mac w/Snow Leopard to HP 2600

Can't print from Intel Mac w/Snow Leopard to HP 2600. Upgraded from OS 10.4 and printer showed on printer list along with an Epson scanner. but continually shows printer as offline. I finally deleted the HP Color Laserjet 2600n from the printer list. When I attempted to re-install it, it doesn't find the printer at all. I haven't attempted to use the scanner. I also went to HP and downloaded the driver, no luck. I've restarted the computer multiple times, tried it with the printer on, and printer off, as well as pulled the usb cable in and out both ends. No error message on the printer display and it gpes through normal warmup until it shows the green light. I run software update and it shows no updates needed. Help!

Go down a few more posts to the question about the C7180. Answer:
"Re: iPhoto 08 + HP Photosmart C7180
Posted: Aug 19, 2007 1:26 PM in response to: Daniel_D
When you press print the first window is pretty basic.
When you select print on that the next window should have an advanced option.
Click that and see if any of the options in the 3rd dropdown box allow you to specify the 'paper tray'.
AC "
In this new windaow, click "advanced", go to "paper type/quality" and choose " best" and a photo paper. Then you will be able to choose a paper source (photo tray).
Once you have these settings, under presets do "save as", and you can choose the preset instead of going to advanced.
If you have the latest software and drivers downloaded from HP, this will work.
Scott

HP Printer Won't Work With Snow Leopard

Hi, I hope you can help. I have just upgraded to Snow Leopard and my HP printer won't print. It is a Laserjet 1015 and new drivers are meant to be on the list with SN. My iMac recognises the printer is there but cannot make a connection. I am networking it using an Airport which is working fine. I have even reset the printer system and deleted the printer and added it again but after starting to process a document to print it just stops.
The other thing is that Pages v 1.0.2 also won't work now. I can open the software, but it can't open any existing documents nor will it open a new blank template. This is my work software (I'm a journalist) so this is a real worry. Any suggestions??
Thanks so much
Jo

Hi JoJoh,
I can't be of much help with the printer but I just checked my "Pages" and my version number is 4.0.2. I'm using iWork 09. Perhaps you need to update? I just checked the "Snow Leopard Compatible" site and found "Apple Pages 4.0.2" is compatible. It didn't mention 1.0.2. I'm so sorry. That's pretty rough when it's how you make your living.
As for the printer, I have an HP Photosmart C4580 which wouldn't print. I finally just deleted all the printers on my MacBook and used my Snow Leopard install disk and selected the "Optional Install" which allowed me to just reinstall the printers. My HP is now working fine. I do feel like this is just a work-around until HP gets things sorted out. I say that because even though my HP now works, the only place it shows up is in my users folder. It's not in my Applications folder, but as long as it works for now, I don't care.
Hope I was of some help to you. Best of luck!

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

I have Windows XP Pro as my Bootcamp option under Snow Leopard. If I upgrade to Lion will I still be able to use this Bootcamp Windows XP operating system as I dont have Windows 7 yet

I have Windows XP Pro as my Bootcamp option under Snow Leopard which works very well indeed.
I would like to upgrade to Lion but am concerned re its lack of support for Bootcamp Windows XP
Can I upgrade to Lion and boot into my old Windows XP BootCamp partition as I do at present OR
must I buy Windows v7 and install under the new Bootcamp system.
Also what happens to my Snow Leopard Time Machines backups - can I see them under Lion?
Many thanks
Peter B.

Boot Camp- Some computers require Microsoft Windows 7

After hard drive crash, Pages app brought over, and upgrade to snow leopard installed, Pages would not launch. Re-downloaded the 3.0.3 update and Pages launched, but will not open any documents or start new document.

After a hard-drive crash, Pages application was brought over from the old hard drive, and upgraded to snow leopard. However, Pages would not launch. I do not have the disks and the computer was given to me by my son with iWork 08 installed, so I do not have the ability to re-install using Purchases. I re-installed the update 3.0.3, which I already had, but thought it worth a try. That enabled Pages to launch, but it will not open a new or old document. I can see in preview the document, but it will not open. Any suggestions besides repurchasing Pages. I've just put out a lot of money for a new hard drive and retrieval of apps and docs from the old hard drive and would like not to have to put more money in it.
Thanks for any suggestions.

You can not simply drag over Pages, particularly if it was perhaps damaged in a crash.
As it was only Pages '08 it may be time to upgrade to Pages '09 from the App Store. It is not that expensive and will allow you to install it on any Mac sharing the same Apple I.D. and protect you from a repeat of this problem.
There are free alternatives to Pages if you are hard strapped, it depends on what you are using Pages for, it is not the only option by far.
Peter

HP 8150N Printer still not working with Snow Leopard

I went to the Hewlett Packard page for a new driver and was told the new driver for my printer was included in the Snow Leopard update. I'm sure it is, but my computer can't find the printer. I've used advice from other discussions and tried what I could with the "Print & Fax" feature on my computer, but so far, nothing works. The printer to a network with two other computers in my office. Any suggestions would be helpful. Thanks in advance.

I believe this to be a "generic" statement since the support agent did not know what your problem was. I have double checked, and there are no known issues with the driver for the 8150n (at least none that engineering has been informed of and is working on).
I fully believe the problem you are experiencing is due to the lack of AppleTalk in Snow Leopard.
First print out the IP address of your printer by printing the configuration page. You may also be able to get this information on the front panel if you dig.
Second, open up the print and fax control panel and click the + button to add a printer. In the add printer window that opens, select the IP button at the top, choose the protocol of HP JetDirect - Socket, and then type the IP address of the printer. If the OS automatically selects the right printer driver (and not Generic PostScript) you are good to go. Click Add Printer and happy printing.
If it doesn't auto select the right printer then your printer probably does not have an IP address that is routable from the Mac. The easiest way to get the printer to grab a new IP address is to cold reset it. Cold Reset the printer by powering it down and then powering it back up while holding down the GO button.
This should force the printer to grab a new IP address. Follow the above steps again to add the printer, and away you'll go.
One drawback of this method is if you have a network that keeps changing and a DHCP server that doesn't reserve IP addresses for devices it is possible that the printer at some point in the future updates its IP address and is no longer reachable. If this happens, simply repeat the steps and you'll be all set. The other alternative is to assign a static IP address to your printer, but that takes a bit more work.
Just trying to help.
Andrew

How does one un-install Lion and revert to Snow Leopard?

Anyone know how to un-install Lion and revert to Snow Leopard?

Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard. I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.

Archive and Install in Snow Leopard?

I'm currently running Snow Leopard, and would like to Archive and Install. While attempting to Archive and Install, I wasn't given an option, so I quit the installer before the operation went too far.
How do I perform an Archive and Install with Snow Leopard?

You seem a little confused about all this. You said you wanted to Archive & Install 10.6 to get a "mostly clean copy" of the system. That's exactly what just running the Snow Leopard installer again will do. An Archive & Install option would do that too, but (assuming it worked like the old one) it would also create a "Previous Systems" folder, move the old system to it, & deactivate it. There is no way to reactivate this archived previous system once deactivated, if that is what you were thinking -- it is just a way to preserve items that you might need to add back to the newly installed one later on, like third party extensions or a user folder if you opted not to preserve users during the A&I.
Note that you do not need to erase anything first unless you want to clean out everything, including user preferences, system settings, & anything else that might be causing the problem. This would be true even if an Archive & Install option was provided, since it doesn't clean out those things either.

About to Erase and Re-Install Snow Leopard. Anything I should know?

I'm about to erase and re-install Snow Leopard on my 2009 21.5' iMac. Something got snarled up during the migration process from my old 2006 iMac to this new one and things have been steadily getting more and more "weird" over time, so it's time for a clean slate.
I have a few specific questions and would be grateful for any other tips you may have regarding this operation as I've done it on Windoze computers many times but never done it on a Mac for obvious reasons
My specific questions are as follows:
1. If I archive my various Mail inboxes, can I just put them back after the re-install and have all my messages back again?
2. Does anyone know how to save Firefox Bookmarks, as it doesn't have an export option like Safari.
3. Any other things I should be aware of.
Your help and suggestions will be much appreciated

After what you want to do, you'll still get the same permissions repair report. Ignore it as detailed in http://support.apple.com/kb/TS1448 (which doesn't include the recent JavaVM warnings).
Your bootstraps solution doesn't hold water. OK. Since the issue is specific to your original user account, you can proceed in two ways. One is to log into your test account, make a list of the preference files (plists) located in /username/Library/Preferences/, including any in the ByHost subfolder, log back into the original account, move everything on that other account's list from the original account's Preferences folder into a newly created folder on the Desktop, log out and back in, and see if the problem goes away. If so, you can copy the ones in the Desktop folder (one at time) back into /Preferences/, restart, and see if the problem returns. If so, you've identified the corrupt/conflicting one. Continue with all of them until isolating the bad ones. That'll save you the trouble of resetting preferences.
The second way is much more detailed and I'll not burden you with the steps unless the above doesn't fix the issue.

Manually migrating iPhoto and iTunes from Snow Leopard to Lion..

Hi all,
I received a shiny new iMac yesterday and in my haste to get it up and running, I began to run the migration assistant on wi-fi. Unfortunately, my 2006 macbook model is so old that my firewire cables don't actually fit the firewire port on the back of the iMac!!
11 hours later, there was still 40 hours left to go. At this point I manually quit the migration assistant. Partly because I have to work and to work I need to use a computer and partly because I realised that I don't want all the old crud from my previous system.. all I want is my iTunes (songs, apps, playlists etc) and my iPhoto to migrate.
The original admin account that the migration assistant was going to replace was still there. Everything seems to be working fine... I did a quick repair of disk permissions and all seems fine. So, I think I flirted with danger by quiting the migration assistant, but danger doesn't seem to have flirted back.
I've searched high and low on the web and I can't find any advice on migrating just your iPhoto and iTunes from Snow Leopard to Lion. I did read a post somewhere (relating to a migration to Leopard) where someone wrote that, for iPhoto, you simply had to replace your iPhoto Library in your pictures folder on the destination machine and then simply start iPhoto. iPhoto would upgrade the databases etc and all would be fine in the world. I cannot find a post online that suggests that this is also the case for Lion.
Can anyone here give me some hints on how to manually migrate the iPhoto and iTunes libraries over (and still preserve playlists in iTunes, albums/events in iPhoto etc)?
I figure that I cannot be the only person in the world who wants a "fresh start" on their machine, with the exception of iPhoto and iTunes.

Resident apple gurus at work have advised me to use the migration assistant and plug an ethernet cable between machines.
I'll give this a go and then go through the process of removing and cleaning up whatever old data I can.. but if someone posts a response to this question for me, I'll happily roll back in time-machine and go again in a cleaner way. :-)

Just purchased a ipad2, could not us it on my MacBook 10.4.1 - Purchased and installed OSX Snow Leopard 10.6.3 - downloaded and installed latest itunes, set up a itunes accounts and tested by purchasing an album and app, ipad does not show in devises?

I just purchased a ipad2, it would not work on my MacBook 10.4.1 I purchased and installed OSX snow leopard 10.6.3 downloaded and installed the latest itunes, set up an itunes account, purchased some music and apps. When i plug in my ipod it shows up and works, but when i plug in my new ipad the ipad screen comes up with a display of a cable and itunes but does not show in devises, i have tried all the resets and different USB ports with no success. Any ideas short of selling it on ebay or buying a new computer?

If you've already tried the usual rebooting of the computer and ports and stuff, there is only a few things left I can think of. It's possible that when you updated iTunes it didn't fully replace all the files, so I suggest just manually removing iTunes and then reinstalling it.
Try removing iTunes manually first http://support.apple.com/kb/HT1224 then download a fresh copy, make sure it is 10.3.1
It is essential that you go through Finder to remove those files it mentions. Otherwise they won't be reinstalled when you run the installer again.

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive. Can't get it to run Hardware Test. Disk Utility says disk OK - files are there. What can I do?

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard. I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host. But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning. I can't get it to run Hardware Test - just get the white screen. If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

Hi-NRG Bwoy wrote:
I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
Reet the SMC and the PRAM
 Cheat sheet to help diagnose and fix your Mac
Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
clean the disk.
If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
How to erase and install Snow Leopard 10.6

I had iLife pre-installed on my aluminium Macbook 2009 with OSX Leopard on it. My hard drive broke but got most of the info off it and just installed snow Leopard on to a new drive and then downloaded and installed Mountain Lion over it. Now I don't have

I had iLife pre-installed on my aluminium Macbook 2009 with OSX Leopard on it. My hard drive broke but got most of the info off it and just installed snow Leopard on to a new drive and then downloaded and installed Mountain Lion over it. Now I don't have iLife anymore. How do I get it back?

Welcome to Apple Support Communities
Mac OS X doesn't come with iLife applications, so you have to install them manually after installing Mac OS X.
Insert the Applications disc or Mac OS X Install Disc 2 DVD and install iLfe applications. Then, open  > Software Update, and install the latest update. If you want, you can purchase iMovie, GarageBand and iPhoto in the App Store, so you will get the most recent version

How do I uninstall OS Lion and revert to Snow Leopard

Hi all, I need to use Microsoft Office Mac Version in my work. And OS X Lion don't support that. I am desparate to know how do I unistall the OS X Lion, and revert to Snow Leopard so that I can resume working on my MacBook Pro. Please help.....

MS Office for mac 2004 is indeed incompatible I believe but 2008 onwards isn't. You should consider upgrading your MS Office to be compatible. Apple is not responsible for making 3rd party software compatible with its OS, its the 3rd party developers who updates their softwares and drivers.
You can certainly revert back to Lion BUT it depends what type of machine do you have?Did you purchase Lion as an upgrade?is your machine Lion preinstalled?

Hp p1005 print quality and options in snow leopard

Similar Messages

Maybe you are looking for