HP P1006 laserjet not working with a windows 7 Dell e5510 laptop

Hello
Any help is appreciated.  When I plug into the usb I get an error message so therefore I can not continue with the installation of the drivers.  aaaaaaahhhhhhhhhhhhhhhhhhh!!!  This is frustrating.
thanks for any advice and suggestions

Hi Donaldparis,
After researching from the HP website, I realize that they do not release the HP LaserJet 3050 All-in-One Printer driver for Windows 7. It means that you will install the Windows 7 built-in basic driver and use the basic features. For more information about how to install the basic driver, you may refer to the following link:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=3463669&prodTypeId=18972&objectID=c01856597#category4
Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If it does not work, you may also try to install the printer driver for Windows Vista under compatibility mode.
Install driver under compatibility mode & Administrator level
==================================
1.Right click on the exe file for driver and click Properties.
2.Click on the Compatibility tab.
3.Select “Run this program in compatibility mode for.”
4.Choose Windows Vista (Service Pack 2) from the drop down list.
5.Select “Run this program as an administrator” option under the Privilege Level topic.
6.Click Apply, click OK.
7. Please double click on the exe file again.
Good luck!
Arthur Li - MSFT

Similar Messages

  • My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

    My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

    My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

  • HT3669 Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. Can someone please advise me how I get the printer to work with my i-Mac? I have installed it but documents don't print. Thanks

    Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. I have the latest (Mountain Lion 10.8.2) OS-X software.
    I have installed the printer using 'System Preferences' on my i-Mac and it appears on the list of available printers but documents that I create just don't print.
    Can someone please advise me how I get the Konica Minolta PagePro 1300W printer to work with my i-Mac?
    Thanks, John Lee

    Looking at the Konica web site for the PagePro 1300W, I saw the following note.
    Please note: This printer is designed to be used in computer operating systems running MS Windows only. Operating systems such as UNIX, Macintosh, or Linux are not supported nor do we have workaround drivers available. Older MS Windows versions, such as Windows 3.1/95/98[pre-SE] and NT 3.51/4.0, are not supported.
    So KM are not going to help you. But the LinuxFoundation does provide a workaround that should allow you to print. Have a look at this web page. You will need to install all three packages as per the instructions from that page.

  • Why i-tunes not working with the windows 8.1?

    i have windows 8.1 in my laptop,but i-tunes not working with it.when i connect my iphone with my laptop its not shown in itunes.
    can you please help me?

    See this support document. http://support.apple.com/kb/TS1538
    The latest version of iTunes works just fine with Windows 8.1.

  • Windows key + left and right arrows not working with RemoteApp windows

    My office is deploying RemoteApps to replace certain locally installed applications.  I, and many of my coworkers, have 2-3 monitors and the Windows
    + left and right "snap" function has been an extremely convenient way to juggle multiple windows across multiple monitors.  Unfortunately, it doesn't seem to work with RemoteApp windows.  Does anyone know a way to get this working?

    Hi,
    Based on my test,  I agree with Keith Langmead, it seems Windows key + left or right key cannot work with remoteapp.
    Alex Zhao
    TechNet Community Support

  • Adobe Active X will not work with my Windows 7.  Suggestions?

    My Adobe Reader 9.xxx was replaced with Active X, which will not work for me.  I keep getting a box message that says perhaps the Adobe.com site is too busy at the tine.  I would rather have my Adobe reader 9.xxxxx back as it worked very well for me.  I have it on my other computer and it work fine.  I am using Windows 7.   Any suggestions?

    Mike Garin wrote:
    After making changes to Internet Explorer, per Adobe's instructions, Adobe Reader is now working.  Thank you for your patience and your help.
    Regards,
    Mike Garin
    From what I understand from this message, it would seem that your Reader passed from "not working" to "now working", whatever you may mean by these two expressions. I am glad.
    May I suggest that next time you have a question, please try to state it clearly and also give enough and accurate details about your problem?
    It would also be useful if you coud mark this question as Answered.

  • WAD 3.x not working with OS Windows 7

    Dear Experts,
    We are using BI 7.0 with ABAP Services. Hence using BEx WAD 3.x version for Templates instead of WAD 7.x.
    On my PC, OS is Windows 7. While opening WAD 3.x it is giving message that "This application requires Internet Explorer 5 or higher. Inform your system administrator."    Earlier it was Windows XP SP2 and WAD 3.x was working fine.
    Also I have IE 8.0 on my PC. Please suggest the solution on the same.
    Regards.
    Deeps

    Hi,
    Please check the OSS Note below:
    WAD 3.X is not supported in MS Windows 7
    SAP Note Number: 1391689 
    -Vikram

  • Chieftec blackbox external HDD, not working with GX740 Windows 7.

    Hi
    I have a Seagate Momentus® 7200.4 750GB
                            SATA 3Gb/s, 16MB, 7200RPM, 2,5"
    using it with Chieftec CEB-25S-U3 HDD Chassi
                            2,5", SATA, USB 3.0, Aluminium, Svart/Silver
    and it doesnt seems like the computer is actually accepting it as a harddrive or something.
    It does find it, but i cant format it or use it as a harddrive, its just there.
    Ive had the same problem with another external hdd, it didnt work on my gx740 with windows7, but it did work on an older computer with windows xp.
    Dunno if it has anything to do with it, but the ENE CIR Receiver doesnt seem to be working in the computer. I dont rly know what it is tbh, but its under the HID Human interface Devices section.
    Tryed to update the driver, but it just says it the latest drivers allready.
    Ive allso had problems with the Bluetooth not working, so maybe the ENE CIR thing is the cause of that =P
    /Snorki

    ENE CIR Receiver is the infra-red receiver for Media Center remote controls (CIR = Consumer InfraRed).
    Quote
    and it doesnt seems like the computer is actually accepting it as a harddrive or something.
    It does find it, but i cant format it or use it as a harddrive, its just there.
    'Just there' where? Is the drive actually partitioned and formatted?
    See: https://forum-en.msi.com/faq/article/how-to-add-a-second-hard-drive-for-storage

  • Cortana not working with new Windows 10 on Yofga 2 13

    I recently updated to the new Windows 10 but am unable to get Cortana to work, even though all my setting are set to English (UK) (required if Cortana is to work). A search online has shown that the only other people I have found with the same issue also own a Yoga 2 13. Just wondering if anyone else with a Yoga 2 13 has had the same problem and if there is any way of overcoming this?

    I have the same problem on my Z510. I have installed the very latest audio drivers but still not working. Like you, I have made sure that my region and language settings are all UK and have installed the UK English pack. I am beginning to think this is a Lenovo problem as, otherwise the WEb would be full of this.

  • Microsoft Arc Mouse not working with my Windows Xp home computer

    I bought the MS Arc Mouse yesterday and plugged the USB into my home computer and nothing happened. I didn't get a popup saying "new hardware recognized" or anything and the mouse did not work. I tried the mouse in my mom's laptop and it worked instantly... does this mouse work for home computers? Why isn't it responding?

    Unplug mouse.
    Download driver: http://www.microsoft.com/hardware/download/downloa​d.aspx?category=MK (You need to select operating system, etc).
    Install driver, and replug in mouse.
    If it does not work at that point, establish that you are plugging it into back USB ports rather then front (as sometimes front USB ports are not powered). Also, try rebooting and changing ports.
    I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
    : Open Mailbox

  • Airport Express Not Working with iMac G4 and HP laptop

    Ok I am really frustrated with this. I had my Airport Express configured to my mac and my old roommate's mac fine. I moved and just tried setting it up with my mac and my new roommate's PC laptop. It did not work. I tried connecting a router to see if that would help. It still didn't work. I reset the airport's default settings and it still didn't work. Is there a connectivity issue between macs and pcs using the airport express that I don't know about? Am I missing something? Can anyone give me some suggestions of what to try next because I am seriously fed up and running out of ideas of how to alleviate this.
    Could it have anything to do with a firewall on the pc or the fact that I'm going from a place that supplied me cable internet to a place that now has dsl?
    Thanks for any help.
    Aaron

    Macs and PCs work together just fine with an Airport Express.
    Unfortunately, you have given us little information to help you with beyond simply indicating that "it doesn't work". Please elaborate:
    1. do the Mac and PC "see" the Airport Express wireless network?
    2. if so, does the Airport Utility (or Airport Admin Utility) on either computer "see" the Airport Express and allow you to view/change its configuration?
    3. what does the status light on the Airport Express show?
    4. if you can connect to the Airport Express wireless network from the PC and/or Mac, is the only problem that you cannot access the internet?
    5. what kind of reset did you do? To really start from scratch, do a factory default reset as described here.

  • Home Sharing will not work with my Windows 8 64bit with new itunes.  All of my Apple TVs will not see my library and my iphones will not function with the "Remote" App.  They all did before.  Only thing that has changed is new PC/itunes.  Any Ideas?

    Installed a new Windows PC on my home network.  PC is Windows 8/64bit. with latest version of itunes 11.1.4.62 for 64bit.  My itunes works, but I can not get Home Sharing to function now.  None of my Apple TV's can see my computer library and prompt me to turn it on.  All of my iphones, pods, pad, can not use the "Remote" app.  When you prompt your phone in Remote App to "add library" and you get the code....iTunes doesnt give you the remote screen where you can enter the code.  I have reloaded iTunes, reset my router, updated all devices.  You can turn on "Home Sharing" on iTunes, but then it closes and doesnt seem to link my devices like it use to.  Also, when the new version of iTunes is up on my PC, you can see the other devices to AirPlay to like you could before.  However, I can send items from my iphone to stream to an Apple TV, I just cant link them all like I could before and control the music playing to multiple Apple TV.  Growing fustrated.  Any ideas, would be helpful.

    Cunning1_
    You are a legend!!  I have spent countless hours uninstalling, reinstalling itunes, playing with firewall settings, reading articles on this problem!!  I only have to un-sync my iphone 5 and then the airplay icon magically appeared!!!  Maybe I have too many devices syncing via wi-fi, or maybe it is the Iphone syncing??
    Whatever - one step and now I can enjoy my music through my house again!
    Thank you, Thank you, Thank you 

  • HP Laserjet not working with CUPS

    There are some related threads in this forum, but I still can't figure out what is my problem (printer works in some situations - printing a pdf in evince or a webpage in chromium - but in others not, e.g. printing from emacs), and there are error messages from hp-check.
    Here are two command-line checks:
    [tj@arch ~]$ lpstat
    [tj@arch ~]$ hp-probe
    HP Linux Imaging and Printing System (ver. 3.12.2)
    Printer Discovery Utility ver. 4.1
    Using connection type: usb
    | DEVICE DISCOVERY |
    Device URI Model
    hp:/usb/HP_LaserJet_P2055d?serial=S1663Y7 HP LaserJet P2055d
    Found 1 printer(s) on the 'usb' bus.
    Here is what the CUPS webinterface at localhost:631 says:
    HP_LaserJet_P2055d (Idle, Accepting Jobs, Not Shared)
    Description: HP_LaserJet_P2055d
    Location:
    Driver: HP LaserJet P2055 Postscript (recommended) (grayscale, 2-sided printing)
    Connection: hp:/usb/HP_LaserJet_P2055d?serial=S1663Y7
    Defaults: job-sheets=none, none media=na_letter_8.5x11in sides=one-sided
    And here is the output from hp-checks, with 4 errors, the 2 most prominent of them extracted first:
    warning: No queues found.
    Checking for permissions of USB attached printers...
    HP Device 0x5c17 at 001:004:
    Device URI: hp:/usb/HP_LaserJet_P2055d?serial=S1663Y7
    error: Unable to connect to dbus session bus.
    Device node: /dev/bus/usb/001/004
    Mode: 0664
    getfacl: Entferne f?hrende '/' von absoluten Pfadnamen
    # file: dev/bus/usb/001/004
    # owner: root
    # group: lp
    user::rw-
    group::rw-
    other::r--
    [tj@arch ~]$ hp-check
    HP Linux Imaging and Printing System (ver. 3.12.2)
    Dependency/Version Check Utility ver. 14.3
    Copyright (c) 2011-14 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.
    Note: hp-check can be run in three modes:
    1. Compile-time check mode (-c or --compile): Use this mode before compiling the
    HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
    are installed to successfully compile HPLIP.
    2. Run-time check mode (-r or --run): Use this mode to determine if a distro
    supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
    has the proper dependencies installed to successfully run.
    3. Both compile- and run-time check mode (-b or --both) (Default): This mode
    will check both of the above cases (both compile- and run-time dependencies).
    Saving output in log file: hp-check.log
    Initializing. Please wait...
    | SYSTEM INFO |
    Basic system information:
    Linux arch 3.2.13-1-ARCH #1 SMP PREEMPT Sat Mar 24 09:10:39 CET 2012 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ AuthenticAMD GNU/Linux
    Distribution:
    unknown 0.0
    Checking Python version...
    OK, version 2.7.2 installed
    Checking PyQt 4.x version...
    OK, version 4.9.1 installed.
    Checking for CUPS...
    Status:
    Version: 1.5.2
    error_log is set to level: warn
    Checking for dbus/python-dbus...
    dbus daemon is running.
    python-dbus version: 0.84.0
    | COMPILE AND RUNTIME DEPENDENCIES |
    note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
    note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
    Checking for dependency: CUPS - Common Unix Printing System...
    OK, found.
    Checking for dependency: CUPS devel- Common Unix Printing System development files...
    OK, found.
    Checking for dependency: CUPS image - CUPS image development files...
    OK, found.
    Checking for dependency: DBus - Message bus system...
    OK, found.
    Checking for dependency: gcc - GNU Project C and C++ Compiler...
    OK, found.
    Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
    OK, found.
    Checking for dependency: libcrypto - OpenSSL cryptographic library...
    OK, found.
    Checking for dependency: libjpeg - JPEG library...
    OK, found.
    Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
    OK, found.
    Checking for dependency: libpthread - POSIX threads library...
    OK, found.
    Checking for dependency: libtool - Library building support services...
    OK, found.
    Checking for dependency: libusb - USB library...
    OK, found.
    Checking for dependency: make - GNU make utility to maintain groups of programs...
    OK, found.
    Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
    warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
    Checking for dependency: PolicyKit - Administrative policy framework...
    OK, found.
    Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
    OK, found.
    Checking for dependency: Python DBus - Python bindings for DBus...
    OK, found.
    Checking for dependency: Python devel - Python development files...
    OK, found.
    Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
    warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
    Checking for dependency: Python XML libraries...
    OK, found.
    Checking for dependency: Python 2.3 or greater - Required for fax functionality...
    OK, found.
    Checking for dependency: Python 2.2 or greater - Python programming language...
    OK, found.
    Checking for dependency: Reportlab - PDF library for Python...
    warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
    Checking for dependency: SANE - Scanning library...
    OK, found.
    Checking for dependency: SANE - Scanning library development files...
    OK, found.
    Checking for dependency: scanimage - Shell scanning program...
    OK, found.
    Checking for dependency: xsane - Graphical scanner frontend for SANE...
    warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
    | HPLIP INSTALLATION |
    Currently installed HPLIP version...
    HPLIP 3.12.2 currently installed in '/usr/share/hplip'.
    Current contents of '/etc/hp/hplip.conf' file:
    # hplip.conf. Generated from hplip.conf.in by configure.
    [hplip]
    version=3.12.2
    [dirs]
    home=/usr/share/hplip
    run=/var/run
    ppd=/usr/share/ppd/HP
    ppdbase=/usr/share/ppd
    doc=/usr/share/doc/hplip-3.12.2
    icon=/usr/share/applications
    cupsbackend=/usr/lib/cups/backend
    cupsfilter=/usr/lib/cups/filter
    drv=/usr/share/cups/drv/hp
    # Following values are determined at configure time and cannot be changed.
    [configure]
    network-build=yes
    pp-build=yes
    gui-build=yes
    scanner-build=yes
    fax-build=yes
    dbus-build=yes
    cups11-build=no
    doc-build=yes
    shadow-build=no
    hpijs-install=yes
    foomatic-drv-install=yes
    foomatic-ppd-install=yes
    foomatic-rip-hplip-install=yes
    hpcups-install=yes
    cups-drv-install=yes
    cups-ppd-install=yes
    internal-tag=3.12.2
    restricted-build=no
    ui-toolkit=qt4
    qt3=no
    qt4=yes
    policy-kit=no
    hpijs-only-build=no
    lite-build=no
    udev-acl-rules=yes
    hpcups-only-build=no
    hpijs-only-build=no
    Current contents of '/var/lib/hp/hplip.state' file:
    # hplip.state - HPLIP runtime persistent variables.
    [plugin]
    installed=0
    eula=0
    Current contents of '~/.hplip/hplip.conf' file:
    [settings]
    systray_visible = 0
    systray_messages = 0
    [last_used]
    device_uri =
    printer_name = HP_LaserJet_P2055d
    working_dir = .
    [commands]
    scan =
    [refresh]
    rate = 30
    enable = false
    type = 1
    [polling]
    enable = false
    interval = 5
    device_list =
    [fax]
    voice_phone =
    email_address =
    [installation]
    date_time = 04/03/12 12:29:03
    version = 3.12.2
    | DISCOVERED USB DEVICES |
    Device URI Model
    hp:/usb/HP_LaserJet_P2055d?seria HP LaserJet P2055d
    l=S1663Y7
    | INSTALLED CUPS PRINTER QUEUES |
    warning: No queues found.
    | SANE CONFIGURATION |
    'hpaio' in '/etc/sane.d/dll.conf'...
    OK, found. SANE backend 'hpaio' is properly set up.
    Checking output of 'scanimage -L'...
    device `v4l:/dev/video0' is a Noname USB Camera (046d:08da) virtual device
    | PYTHON EXTENSIONS |
    Checking 'cupsext' CUPS extension...
    OK, found.
    Checking 'pcardext' Photocard extension...
    OK, found.
    Checking 'hpmudext' I/O extension...
    OK, found.
    Checking 'scanext' SANE scanning extension...
    OK, found.
    | USB I/O SETUP |
    Checking for permissions of USB attached printers...
    HP Device 0x5c17 at 001:004:
    Device URI: hp:/usb/HP_LaserJet_P2055d?serial=S1663Y7
    error: Unable to connect to dbus session bus.
    Device node: /dev/bus/usb/001/004
    Mode: 0664
    getfacl: Entferne f?hrende '/' von absoluten Pfadnamen
    # file: dev/bus/usb/001/004
    # owner: root
    # group: lp
    user::rw-
    group::rw-
    other::r--
    | USER GROUPS |
    lp wheel games video audio optical storage scanner power users www
    | SUMMARY |
    error: 4 errors and/or warnings.
    Please refer to the installation instructions at:
    http://hplip.sourceforge.net/install/index.html
    Done.
    Maybe there is something wrong with my dbus anyway? I get a lot of org.freedesktop.xyz not found messages in many situations.
    Thanks for any hints.
    Last edited by 4on6 (2012-04-03 14:16:14)

    4on6 wrote:There are some related threads in this forum, but I still can't figure out what is my problem (printer works in some situations - printing a pdf in evince or a webpage in chromium - but in others not, e.g. printing from emacs).
    The distinction that comes to mind here is that emacs (and some others) will print via lp.  I suspect that the default printer for lp is not set, and therefore the print job is lost.
    To test this, create ~/.cups/lpoptions (if you don't already have it) with the content:
    Default <The_Name_Of_My_Printer_In_CUPS>
    And see if that helps.

  • New Ipod nano not working with my Windows 2000

    I have just bought an ipod nano 8GB, and tried to install it. The latest itunes I can put on my computer is 7.3.2 as it is a Windows 2000 not an XP. Unfortunately the nano is saying it needs 7.4 and above. can anyone help please?

    I wish you would have asked or checked on the tech specifications for the Nano prior to purchase. These are the required tech specs, copied directly from the Nano page. I'm sorry there's nothing you can do.
    # PC with USB 2.0 port
    # Windows Vista or Windows XP Home or Professional with Service Pack 2 or later
    # iTunes 7.6 or later

  • The latest version of iTunes will not work with my windows platforms. It cannot access the windows runtime library.

    The latest iTunes can't access my windows (including Vista 32 & 64bit, nor Windows 7 64 bit and 32 bit versions) "Runtime" library. I've tried reloading the windows suggested .dll as well as doing a system restore and also downloaded the iTunes update and load it manually, but nothing will work. Is Apple aware of the problem and planning to release a fix, or do I have to abandon iTunes and my iPod?

    Hello there, Enantiomer.
    The following Knowledge Base article provides some recommendations for troubleshooting:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for